Debian Codegraph @

gmond/python_modules/Makefile.in

raw
1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
2 # @configure_input@
3
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6 # Foundation, Inc.
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
10
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14 # PARTICULAR PURPOSE.
15
16 @SET_MAKE@
17 VPATH = @srcdir@
18 am__make_dryrun = \
19 { \
20 am__dry=no; \
21 case $$MAKEFLAGS in \
22 *\\[\ \ ]*) \
23 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
24 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
25 *) \
26 for am__flg in $$MAKEFLAGS; do \
27 case $$am__flg in \
28 *=*|--*) ;; \
29 *n*) am__dry=yes; break;; \
30 esac; \
31 done;; \
32 esac; \
33 test $$am__dry = yes; \
34 }
35 pkgdatadir = $(datadir)/@PACKAGE@
36 pkgincludedir = $(includedir)/@PACKAGE@
37 pkglibdir = $(libdir)/@PACKAGE@
38 pkglibexecdir = $(libexecdir)/@PACKAGE@
39 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
40 install_sh_DATA = $(install_sh) -c -m 644
41 install_sh_PROGRAM = $(install_sh) -c
42 install_sh_SCRIPT = $(install_sh) -c
43 INSTALL_HEADER = $(INSTALL_DATA)
44 transform = $(program_transform_name)
45 NORMAL_INSTALL = :
46 PRE_INSTALL = :
47 POST_INSTALL = :
48 NORMAL_UNINSTALL = :
49 PRE_UNINSTALL = :
50 POST_UNINSTALL = :
51 build_triplet = @build@
52 host_triplet = @host@
53 subdir = gmond/python_modules
54 SUBDIRS =
55 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
56 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
57 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
58 $(top_srcdir)/configure.ac
59 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
60 $(ACLOCAL_M4)
61 mkinstalldirs = $(install_sh) -d
62 CONFIG_HEADER = $(top_builddir)/config.h
63 CONFIG_CLEAN_FILES =
64 CONFIG_CLEAN_VPATH_FILES =
65 SOURCES =
66 DIST_SOURCES =
67 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
68 html-recursive info-recursive install-data-recursive \
69 install-dvi-recursive install-exec-recursive \
70 install-html-recursive install-info-recursive \
71 install-pdf-recursive install-ps-recursive install-recursive \
72 installcheck-recursive installdirs-recursive pdf-recursive \
73 ps-recursive uninstall-recursive
74 am__can_run_installinfo = \
75 case $$AM_UPDATE_INFO_DIR in \
76 n|no|NO) false;; \
77 *) (install-info --version) >/dev/null 2>&1;; \
78 esac
79 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
80 distclean-recursive maintainer-clean-recursive
81 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
82 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
83 distdir
84 ETAGS = etags
85 CTAGS = ctags
86 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
87 am__relativize = \
88 dir0=`pwd`; \
89 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
90 sed_rest='s,^[^/]*/*,,'; \
91 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
92 sed_butlast='s,/*[^/]*$$,,'; \
93 while test -n "$$dir1"; do \
94 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
95 if test "$$first" != "."; then \
96 if test "$$first" = ".."; then \
97 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
98 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
99 else \
100 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
101 if test "$$first2" = "$$first"; then \
102 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
103 else \
104 dir2="../$$dir2"; \
105 fi; \
106 dir0="$$dir0"/"$$first"; \
107 fi; \
108 fi; \
109 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
110 done; \
111 reldir="$$dir2"
112 ACLOCAL = @ACLOCAL@
113 AMTAR = @AMTAR@
114 APR_CFLAGS = @APR_CFLAGS@
115 APR_INCLUDES = @APR_INCLUDES@
116 APR_LIBS = @APR_LIBS@
117 AR = @AR@
118 AUTOCONF = @AUTOCONF@
119 AUTOHEADER = @AUTOHEADER@
120 AUTOMAKE = @AUTOMAKE@
121 AWK = @AWK@
122 CC = @CC@
123 CCDEPMODE = @CCDEPMODE@
124 CFLAGS = @CFLAGS@
125 CPP = @CPP@
126 CPPFLAGS = @CPPFLAGS@
127 CYGPATH_W = @CYGPATH_W@
128 DEFS = @DEFS@
129 DEPDIR = @DEPDIR@
130 DEPS_CFLAGS = @DEPS_CFLAGS@
131 DEPS_LIBS = @DEPS_LIBS@
132 DLLTOOL = @DLLTOOL@
133 DSYMUTIL = @DSYMUTIL@
134 DUMPBIN = @DUMPBIN@
135 ECHO_C = @ECHO_C@
136 ECHO_N = @ECHO_N@
137 ECHO_T = @ECHO_T@
138 EGREP = @EGREP@
139 EXEEXT = @EXEEXT@
140 EXPORT_SYMBOLS = @EXPORT_SYMBOLS@
141 EXPORT_SYMBOLS_DYNAMIC = @EXPORT_SYMBOLS_DYNAMIC@
142 FGREP = @FGREP@
143 GANGLIA_MAJOR_VERSION = @GANGLIA_MAJOR_VERSION@
144 GANGLIA_MICRO_VERSION = @GANGLIA_MICRO_VERSION@
145 GANGLIA_MINOR_VERSION = @GANGLIA_MINOR_VERSION@
146 GANGLIA_VERSION = @GANGLIA_VERSION@
147 GREP = @GREP@
148 GWEB_VERSION = @GWEB_VERSION@
149 INSTALL = @INSTALL@
150 INSTALL_DATA = @INSTALL_DATA@
151 INSTALL_PROGRAM = @INSTALL_PROGRAM@
152 INSTALL_SCRIPT = @INSTALL_SCRIPT@
153 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
154 LD = @LD@
155 LDFLAGS = @LDFLAGS@
156 LIBGANGLIA_BINARY_AGE = @LIBGANGLIA_BINARY_AGE@
157 LIBGANGLIA_INTERFACE_AGE = @LIBGANGLIA_INTERFACE_AGE@
158 LIBOBJS = @LIBOBJS@
159 LIBS = @LIBS@
160 LIBTOOL = @LIBTOOL@
161 LIPO = @LIPO@
162 LN_S = @LN_S@
163 LTLIBOBJS = @LTLIBOBJS@
164 LT_AGE = @LT_AGE@
165 LT_CURRENT = @LT_CURRENT@
166 LT_RELEASE = @LT_RELEASE@
167 LT_REVISION = @LT_REVISION@
168 MAKEINFO = @MAKEINFO@
169 MANIFEST_TOOL = @MANIFEST_TOOL@
170 MKDIR_P = @MKDIR_P@
171 NM = @NM@
172 NMEDIT = @NMEDIT@
173 OBJDUMP = @OBJDUMP@
174 OBJEXT = @OBJEXT@
175 OTOOL = @OTOOL@
176 OTOOL64 = @OTOOL64@
177 PACKAGE = @PACKAGE@
178 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
179 PACKAGE_NAME = @PACKAGE_NAME@
180 PACKAGE_STRING = @PACKAGE_STRING@
181 PACKAGE_TARNAME = @PACKAGE_TARNAME@
182 PACKAGE_URL = @PACKAGE_URL@
183 PACKAGE_VERSION = @PACKAGE_VERSION@
184 PATH_SEPARATOR = @PATH_SEPARATOR@
185 PERL_BIN = @PERL_BIN@
186 PERL_CFLAGS = @PERL_CFLAGS@
187 PERL_INCLUDES = @PERL_INCLUDES@
188 PERL_LDFLAGS = @PERL_LDFLAGS@
189 PKG_CONFIG = @PKG_CONFIG@
190 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
191 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
192 PROTOBUF_C_CFLAGS = @PROTOBUF_C_CFLAGS@
193 PROTOBUF_C_LIBS = @PROTOBUF_C_LIBS@
194 PROTOC_C = @PROTOC_C@
195 PYTHON_BIN = @PYTHON_BIN@
196 PYTHON_INCLUDES = @PYTHON_INCLUDES@
197 PYTHON_VERSION = @PYTHON_VERSION@
198 RANLIB = @RANLIB@
199 REL = @REL@
200 SED = @SED@
201 SET_MAKE = @SET_MAKE@
202 SHELL = @SHELL@
203 STATIC_USER_MODULES = @STATIC_USER_MODULES@
204 STRIP = @STRIP@
205 VERSION = @VERSION@
206 abs_builddir = @abs_builddir@
207 abs_srcdir = @abs_srcdir@
208 abs_top_builddir = @abs_top_builddir@
209 abs_top_srcdir = @abs_top_srcdir@
210 ac_ct_AR = @ac_ct_AR@
211 ac_ct_CC = @ac_ct_CC@
212 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
213 am__include = @am__include@
214 am__leading_dot = @am__leading_dot@
215 am__quote = @am__quote@
216 am__tar = @am__tar@
217 am__untar = @am__untar@
218 bindir = @bindir@
219 build = @build@
220 build_alias = @build_alias@
221 build_cpu = @build_cpu@
222 build_os = @build_os@
223 build_vendor = @build_vendor@
224 builddir = @builddir@
225 datadir = @datadir@
226 datarootdir = @datarootdir@
227 docdir = @docdir@
228 dvidir = @dvidir@
229 exec_prefix = @exec_prefix@
230 gsysconfdir = @gsysconfdir@
231 host = @host@
232 host_alias = @host_alias@
233 host_cpu = @host_cpu@
234 host_os = @host_os@
235 host_vendor = @host_vendor@
236 htmldir = @htmldir@
237 includedir = @includedir@
238 infodir = @infodir@
239 install_sh = @install_sh@
240 libdir = @libdir@
241 libexecdir = @libexecdir@
242 localedir = @localedir@
243 localstatedir = @localstatedir@
244 mandir = @mandir@
245 mkdir_p = @mkdir_p@
246 modpathstart = @modpathstart@
247 moduledir = @moduledir@
248 oldincludedir = @oldincludedir@
249 pdfdir = @pdfdir@
250 prefix = @prefix@
251 program_transform_name = @program_transform_name@
252 psdir = @psdir@
253 sbindir = @sbindir@
254 setgid_group = @setgid_group@
255 setuid_user = @setuid_user@
256 sharedstatedir = @sharedstatedir@
257 srcdir = @srcdir@
258 subdirs = @subdirs@
259 sysconfdir = @sysconfdir@
260 systemdsystemunitdir = @systemdsystemunitdir@
261 target_alias = @target_alias@
262 top_build_prefix = @top_build_prefix@
263 top_builddir = @top_builddir@
264 top_srcdir = @top_srcdir@
265 varstatedir = @varstatedir@
266 DIST_SUBDIRS = apache_status cpu db disk example memcached memory network nfs process ssl varnish vm_stats xen
267 EXTRA_DIST = ./conf.d/*.pyconf ./conf.d/*.pyconf.disabled
268 all: all-recursive
269
270 .SUFFIXES:
271 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
272 @for dep in $?; do \
273 case '$(am__configure_deps)' in \
274 *$$dep*) \
275 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
276 && { if test -f $@; then exit 0; else break; fi; }; \
277 exit 1;; \
278 esac; \
279 done; \
280 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign gmond/python_modules/Makefile'; \
281 $(am__cd) $(top_srcdir) && \
282 $(AUTOMAKE) --foreign gmond/python_modules/Makefile
283 .PRECIOUS: Makefile
284 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
285 @case '$?' in \
286 *config.status*) \
287 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
288 *) \
289 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
290 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
291 esac;
292
293 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
294 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
295
296 $(top_srcdir)/configure: $(am__configure_deps)
297 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
298 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
299 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
300 $(am__aclocal_m4_deps):
301
302 mostlyclean-libtool:
303 -rm -f *.lo
304
305 clean-libtool:
306 -rm -rf .libs _libs
307
308 # This directory's subdirectories are mostly independent; you can cd
309 # into them and run `make' without going through this Makefile.
310 # To change the values of `make' variables: instead of editing Makefiles,
311 # (1) if the variable is set in `config.status', edit `config.status'
312 # (which will cause the Makefiles to be regenerated when you run `make');
313 # (2) otherwise, pass the desired values on the `make' command line.
314 $(RECURSIVE_TARGETS):
315 @fail= failcom='exit 1'; \
316 for f in x $$MAKEFLAGS; do \
317 case $$f in \
318 *=* | --[!k]*);; \
319 *k*) failcom='fail=yes';; \
320 esac; \
321 done; \
322 dot_seen=no; \
323 target=`echo $@ | sed s/-recursive//`; \
324 list='$(SUBDIRS)'; for subdir in $$list; do \
325 echo "Making $$target in $$subdir"; \
326 if test "$$subdir" = "."; then \
327 dot_seen=yes; \
328 local_target="$$target-am"; \
329 else \
330 local_target="$$target"; \
331 fi; \
332 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
333 || eval $$failcom; \
334 done; \
335 if test "$$dot_seen" = "no"; then \
336 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
337 fi; test -z "$$fail"
338
339 $(RECURSIVE_CLEAN_TARGETS):
340 @fail= failcom='exit 1'; \
341 for f in x $$MAKEFLAGS; do \
342 case $$f in \
343 *=* | --[!k]*);; \
344 *k*) failcom='fail=yes';; \
345 esac; \
346 done; \
347 dot_seen=no; \
348 case "$@" in \
349 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
350 *) list='$(SUBDIRS)' ;; \
351 esac; \
352 rev=''; for subdir in $$list; do \
353 if test "$$subdir" = "."; then :; else \
354 rev="$$subdir $$rev"; \
355 fi; \
356 done; \
357 rev="$$rev ."; \
358 target=`echo $@ | sed s/-recursive//`; \
359 for subdir in $$rev; do \
360 echo "Making $$target in $$subdir"; \
361 if test "$$subdir" = "."; then \
362 local_target="$$target-am"; \
363 else \
364 local_target="$$target"; \
365 fi; \
366 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
367 || eval $$failcom; \
368 done && test -z "$$fail"
369 tags-recursive:
370 list='$(SUBDIRS)'; for subdir in $$list; do \
371 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
372 done
373 ctags-recursive:
374 list='$(SUBDIRS)'; for subdir in $$list; do \
375 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
376 done
377
378 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
379 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
380 unique=`for i in $$list; do \
381 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
382 done | \
383 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
384 END { if (nonempty) { for (i in files) print i; }; }'`; \
385 mkid -fID $$unique
386 tags: TAGS
387
388 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
389 $(TAGS_FILES) $(LISP)
390 set x; \
391 here=`pwd`; \
392 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
393 include_option=--etags-include; \
394 empty_fix=.; \
395 else \
396 include_option=--include; \
397 empty_fix=; \
398 fi; \
399 list='$(SUBDIRS)'; for subdir in $$list; do \
400 if test "$$subdir" = .; then :; else \
401 test ! -f $$subdir/TAGS || \
402 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
403 fi; \
404 done; \
405 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
406 unique=`for i in $$list; do \
407 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
408 done | \
409 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
410 END { if (nonempty) { for (i in files) print i; }; }'`; \
411 shift; \
412 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
413 test -n "$$unique" || unique=$$empty_fix; \
414 if test $$# -gt 0; then \
415 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
416 "$$@" $$unique; \
417 else \
418 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
419 $$unique; \
420 fi; \
421 fi
422 ctags: CTAGS
423 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
424 $(TAGS_FILES) $(LISP)
425 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
426 unique=`for i in $$list; do \
427 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
428 done | \
429 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
430 END { if (nonempty) { for (i in files) print i; }; }'`; \
431 test -z "$(CTAGS_ARGS)$$unique" \
432 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
433 $$unique
434
435 GTAGS:
436 here=`$(am__cd) $(top_builddir) && pwd` \
437 && $(am__cd) $(top_srcdir) \
438 && gtags -i $(GTAGS_ARGS) "$$here"
439
440 distclean-tags:
441 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
442
443 distdir: $(DISTFILES)
444 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
445 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
446 list='$(DISTFILES)'; \
447 dist_files=`for file in $$list; do echo $$file; done | \
448 sed -e "s|^$$srcdirstrip/||;t" \
449 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
450 case $$dist_files in \
451 */*) $(MKDIR_P) `echo "$$dist_files" | \
452 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
453 sort -u` ;; \
454 esac; \
455 for file in $$dist_files; do \
456 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
457 if test -d $$d/$$file; then \
458 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
459 if test -d "$(distdir)/$$file"; then \
460 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
461 fi; \
462 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
463 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
464 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
465 fi; \
466 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
467 else \
468 test -f "$(distdir)/$$file" \
469 || cp -p $$d/$$file "$(distdir)/$$file" \
470 || exit 1; \
471 fi; \
472 done
473 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
474 if test "$$subdir" = .; then :; else \
475 $(am__make_dryrun) \
476 || test -d "$(distdir)/$$subdir" \
477 || $(MKDIR_P) "$(distdir)/$$subdir" \
478 || exit 1; \
479 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
480 $(am__relativize); \
481 new_distdir=$$reldir; \
482 dir1=$$subdir; dir2="$(top_distdir)"; \
483 $(am__relativize); \
484 new_top_distdir=$$reldir; \
485 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
486 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
487 ($(am__cd) $$subdir && \
488 $(MAKE) $(AM_MAKEFLAGS) \
489 top_distdir="$$new_top_distdir" \
490 distdir="$$new_distdir" \
491 am__remove_distdir=: \
492 am__skip_length_check=: \
493 am__skip_mode_fix=: \
494 distdir) \
495 || exit 1; \
496 fi; \
497 done
498 check-am: all-am
499 check: check-recursive
500 all-am: Makefile
501 installdirs: installdirs-recursive
502 installdirs-am:
503 install: install-recursive
504 install-exec: install-exec-recursive
505 install-data: install-data-recursive
506 uninstall: uninstall-recursive
507
508 install-am: all-am
509 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
510
511 installcheck: installcheck-recursive
512 install-strip:
513 if test -z '$(STRIP)'; then \
514 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
515 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
516 install; \
517 else \
518 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
519 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
520 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
521 fi
522 mostlyclean-generic:
523
524 clean-generic:
525
526 distclean-generic:
527 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
528 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
529
530 maintainer-clean-generic:
531 @echo "This command is intended for maintainers to use"
532 @echo "it deletes files that may require special tools to rebuild."
533 clean: clean-recursive
534
535 clean-am: clean-generic clean-libtool mostlyclean-am
536
537 distclean: distclean-recursive
538 -rm -f Makefile
539 distclean-am: clean-am distclean-generic distclean-tags
540
541 dvi: dvi-recursive
542
543 dvi-am:
544
545 html: html-recursive
546
547 html-am:
548
549 info: info-recursive
550
551 info-am:
552
553 install-data-am:
554
555 install-dvi: install-dvi-recursive
556
557 install-dvi-am:
558
559 install-exec-am:
560
561 install-html: install-html-recursive
562
563 install-html-am:
564
565 install-info: install-info-recursive
566
567 install-info-am:
568
569 install-man:
570
571 install-pdf: install-pdf-recursive
572
573 install-pdf-am:
574
575 install-ps: install-ps-recursive
576
577 install-ps-am:
578
579 installcheck-am:
580
581 maintainer-clean: maintainer-clean-recursive
582 -rm -f Makefile
583 maintainer-clean-am: distclean-am maintainer-clean-generic
584
585 mostlyclean: mostlyclean-recursive
586
587 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
588
589 pdf: pdf-recursive
590
591 pdf-am:
592
593 ps: ps-recursive
594
595 ps-am:
596
597 uninstall-am:
598
599 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
600 install-am install-strip tags-recursive
601
602 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
603 all all-am check check-am clean clean-generic clean-libtool \
604 ctags ctags-recursive distclean distclean-generic \
605 distclean-libtool distclean-tags distdir dvi dvi-am html \
606 html-am info info-am install install-am install-data \
607 install-data-am install-dvi install-dvi-am install-exec \
608 install-exec-am install-html install-html-am install-info \
609 install-info-am install-man install-pdf install-pdf-am \
610 install-ps install-ps-am install-strip installcheck \
611 installcheck-am installdirs installdirs-am maintainer-clean \
612 maintainer-clean-generic mostlyclean mostlyclean-generic \
613 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
614 uninstall uninstall-am
615
616
617 # Tell versions [3.59,3.63) of GNU make to not export all variables.
618 # Otherwise a system limit (for SysV at least) may be exceeded.
619 .NOEXPORT: