Debian Codegraph @

examples/bamg/quadloop/dotest.pl

raw
1 #!/usr/bin/perl
2 # -- so option
3
4 ##$f="10 + 1/(1+ 100**(sin(x*3)-y)) ";
5 $f = "10 + sin(x/10)*cos(y/3)";
6 $err=0.001;
7 $errg=0.05;
8 $nbiteration=3;
9 $bamg="../../src/bamg/bamg";
10 $quadoption="";
11 $bamgoption=" -AbsError -NbJacobi 3 -ratio 2 -anisomax 30";
12 $quadoption=" -2q -thetaquad 30 -coef 2";
13
14 # --- change x in $x and y in $y
15 $_=$f;
16 s/x/\$x/g;
17 s/y/\$y/g;
18 $f="$_;";
19 print "The function = f(x,y) = $f \n";
20
21 #--------------------------
22 $suffixe=".mesh";
23 $iteration=0;
24 $GH="Gh$suffixe";
25 $TH="Th$iteration$suffixe";
26 $, = ' '; # set output field separator
27 $\ = "\n"; # set output record separator
28 ## -------------------------------------------------------------
29 ## --- construction the Geometry file Gh.mesh
30 ## a naca0012 wing in a big circle radius 5
31 ## 20 points on the up wing
32 ## 20 points on the down wing
33 ## 8 points on circle of radius r
34 open(GH,">$GH") || die "Can't redirect stdout";
35 $Pi = 3.14159265358979;
36 $i20 = 20;
37 $i8 = 8;
38 $r = 5;
39 $c0x = 1;
40 $c0y = 0;
41 print GH 'Dimension', 2;
42 print GH 'MaximalAngleOfCorner 46';
43
44 print GH 'Vertices';
45 print GH $i20 + $i20 + $i8;
46
47 # the vertex on naca012 wing ( clock wise)
48 for ($i = -$i20; $i < $i20; $i++) {
49 $X = $i / $i20;
50 $X = $X ** 4;
51
52 $t = 1.008930411365 * $X;
53 $Y = 5 * .12 * (0.2969 * sqrt($t) - 0.126 * $t - 0.3516 * $t ** 2 + 0.2843
54
55 * $t ** 3 - 0.1015 * $t ** 4);
56 if ($i < 0) {
57 $Y = -$Y;
58 }
59 print GH $X, $Y, 3;
60 }
61
62 # vertex on circle (counter clock wise)
63 for ($i = 0; $i < $i8; $i++) {
64 $t = $i * $Pi * 2 / $i8;
65 print GH $c0x + $r * (cos($t)), $c0y + $r * sin($t), 5;
66 }
67
68 print GH 'Edges', $i20 + $i20 + $i8;
69
70 # edge on wing
71 $k = 1;
72 $j = $i20 + $i20 - 1;
73 # previous points
74 for ($i = 0; $i < $i20 + $i20; $j = $i++) {
75 print GH $j + $k, $i + $k, 3;
76 }
77 # previous, current vertex
78
79 # edge on circle
80 $k = $i20 + $i20 + 1;
81 $j = $i8 - 1;
82 # previous points
83 for ($i = 0; $i < $i8; $j = $i++) {
84 print GH $k + $j, $k + $i, 5;
85 }
86 # previous, current vertex
87
88 # one subdomain, region on left side of the wing
89 # because clock wise sens.
90 print GH 'SubDomain', 1;
91 print GH 2, 1, 1, 0;
92 close GH;
93 ## -------------- END construct of the geom
94 ##
95
96 # -- make the DATA file for the mesh to also save the arguments
97 open(BAMG,">DATA_bamg") || die "Can't open DATA_bamg";
98 print BAMG "$quadoption $bamgoption -g $GH -o $TH -v 9";
99 close(BAMG);
100
101 ## constructio the inital mesh
102 !system($bamg) || die "Error in bamg construction of initial mesh $Th";
103
104 ## the adpatation loop
105 while ($iteration<$nbiteration) {
106
107
108 $BB="$iteration.bb";
109
110 ## construction of the solution
111 $errsol=0;
112 open (TH,"<$TH") || die "Can't open $TH";
113 open (BB,">$BB") || die "Can't open $BB";
114 open (PLOT,">PLOT") || die "Can't open PLOT";
115 while (<TH>) {
116 if(/^Vertices$/) {
117 $nbv=<TH>;
118 chop($nbv);
119 print BB "2 1 $nbv 2";
120 for ($i=1;$i<=$nbv;$i++) {
121 ($x,$y,$ref)=split(/[\ \t\n]+/, <TH>);
122 $fxy=eval $f;
123
124 $xx[$i]=$x;
125 $yy[$i]=$y;
126 $ff[$i]=$fxy;
127
128 print BB $fxy;
129 };
130 };
131 if(/^Triangles$/) {
132 print " Nb of Triangles = $nbt \n";
133 $nbt=<TH>;
134 chop($nbt);
135 for ($i=1;$i<=$nbt;$i++) {
136 ($i0,$i1,$i2,$ref)=split(/[\ \t\n]+/, <TH>);
137 print PLOT "$xx[$i0] $yy[$i0] $ff[$i0]";
138 print PLOT "$xx[$i1] $yy[$i1] $ff[$i1]";
139 print PLOT "$xx[$i2] $yy[$i2] $ff[$i2]";
140 print PLOT "$xx[$i0] $yy[$i0] $ff[$i0]";
141 print PLOT "";
142
143 $x = ($xx[$i0]+$xx[$i1]+$xx[$i2])/3;
144 $y = ($yy[$i0]+$yy[$i1]+$yy[$i2])/3;
145 $fm = ($ff[$i0]+$ff[$i1]+$ff[$i2])/3;
146 $fxy = eval $f;
147 $vv=($fm-$fxy);
148 $vv= ($vv<0)?-$vv:$vv;
149 # print " $i0 $i1 $i2 $xx[$i0] $xx[$i1] $xx[$i2] ";
150 # print " $i $x $y $fm $fxy err= $errsol diff=$vv";
151 $errsol = ($errsol>$vv) ? $errsol : $vv;
152 };
153 };
154
155 };
156 close TH;
157 close BB;
158 close PLOT;
159 print " ---------------------------------------------\n";
160 print "\n\n Iteration $iteration\n Erreur L_infini = $errsol \n\n";
161 print " ---------------------------------------------\n";
162
163 ## -----------------------
164
165 $iteration++;
166 $BTH=$TH;
167 $TH="Th$iteration$suffixe";
168
169 open(BAMG,">DATA_bamg") || die "Can't open DATA_bamg";
170 print BAMG "$quadoption $bamgoption -Mbb $BB -errg $errg -err $err -b $BTH -o $TH -v 9";
171 close(BAMG);
172 !system($bamg) || die "Error in bamg construction of adapted $iteration mesh $Th";
173 }
174
175 print "Normal End\n";