Debian Codegraph @

NEWS

raw
1 This file lists notable changes in each release. For the full history of all
2 changes, see ChangeLog.
3
4 Version 1.94.5:
5
6 Highlights:
7 - fprintd now depends on libfprint 1.94.9
8 - Improved handling of device errors
9 - pam: reduce minimum timeout to 1 second
10 - pam: support unlimited timeout
11
12 Version 1.94.4:
13
14 Highlights:
15 - Support building in other non-linux unix platforms (FreeBSD tested)
16 - Bump minimum glib dependency version to 2.64
17 - Allow interactive DBus authorization on fprintd-tools
18 - Use prefix to determine the PAM modules dir
19 - Translation updates
20
21 Version 1.94.3:
22
23 Highlights:
24 - Don't try to clear storage on devices without internal storage
25 - Build: Add option to use libelogind for DBus
26 - Fixed loading external storage modules
27 - Do not require bash to build (just posix sh)
28 - Tests fixes for newer python, python-dbusmock and libfprint
29 - Even more translation updates
30
31 Version 1.94.2:
32
33 API users, please adjust now to planned API changes in 2.0:
34 - EnrollStart will throw an error if the finger was enrolled already
35 - Interactive DBus authentication will only happen when requested
36
37 Highlights:
38 - Add PAM module options to ignore timeout/retry limits
39 - A lot of translation updates after the POT file was fixed
40 - Improve meson build file and fix building with meson 0.61.0
41
42 Version 1.94.1:
43
44 API users, please adjust now to planned API changes in 2.0:
45 - EnrollStart will throw an error if the finger was enrolled already
46 - Interactive DBus authentication will only happen when requested
47
48 Highlights.
49 - Fix systemd unit so that udev hotplug events are processed
50 - Report back the selected finger if there is only one
51 - Change PolicyKit strings for clarity
52 - Various fixes to the testsuite
53 - Plenty of translation updates
54
55 Version 1.94.0:
56
57 API users, please adjust now to planned API changes in 2.0:
58 - EnrollStart will throw an error if the finger was enrolled already
59 - Interactive DBus authentication will only happen when requested
60
61 Highlights:
62 - Implement suspend/resume handling.
63 This requires writing "power/persist" and "power/wakeup" in sysfs.
64 - Support libfprint overheat protections
65 - Delete host prints when device prints disappeared
66 - pam: Immediately return success information
67 - Plenty of updated translations thanks to move to Fedora Weblate
68 - Fix possible race when retrieving session information
69 - Fix possible race when a client disconnects
70 - GLib 2.56 compatibility fixes
71
72
73 Version 1.92.0:
74
75 API users, please adjust now to planned API changes in 2.0:
76 - EnrollStart will throw an error if the finger was enrolled already
77 - Interactive DBus authentication will only happen when requested
78
79 Highlights:
80 - fprintd now prevents the same finger to be enrolled twice
81 - Support clearing storage of match-on-chip devices
82 - pam: Cancel authentication on SIGINT (e.g. ctrl+c with sudo)
83 - pam: Always return PAM_AUTHINFO_UNAVAIL for devices without prints
84 - Expose finger status on DBus
85 - Add method to delete only a specific print of a user
86 - Improved error reporting for deletion
87 - Wait for finger removal before cancelling operations
88 - Prefer older prints when garbage collecting
89 - Major improvements to test coverage
90
91 Version 1.90.9:
92
93 Highlights:
94 - Fix multiple daemon lockup issues (#97)
95 - Fix print garbage collection to not delete used prints
96 - pam: Use the device with the most prints
97
98
99 Version 1.90.8:
100
101 It seems that we are finally reaching the end of the tunnel with regard
102 to regressions. One more issue that cropped up was that a pam_fprintd fix
103 to avoid a possible authentication bypass caused issues when fprintd was
104 just started on demand.
105
106 Highlights:
107 - pam: Only listen to NameOwnerChanged after fprintd is known to run (#94)
108 - Place new ObjectManager DBus API at /net/reactivated/Fprint
109
110
111 Version 1.90.7:
112
113 While 1.90.6 fixed a number of issues, we did have a bad regression due
114 causing pam_fprintd to crash when there are no fingerprint devices
115 installed.
116
117 Highlights:
118 - pam: Guard strdup calls against NULL pointers
119
120
121 Version 1.90.6:
122
123 The 1.90.5 release was unusable due to a number of inter-related issues
124 with the DBus interface and authorization. We also found a number of
125 problems with possible security implications.
126
127 Currently fprintd will do interactive authorization even if this was not
128 requested using the correct DBus method call flag. All API users MUST be
129 updated to set the flag as it will be enabled in the future!
130
131 Highlights:
132 - Fix fprintd DBus configuration
133 - Change details of what requires authorization
134 - Fix various race conditions in pam_fprintd
135 - Permit interactive authorization from fprintd utilities
136 - Do not allow deletion while another operation is ongoing
137
138
139 Version 1.90.5:
140
141 The 1.90.4 release contained some bad errors, this release addresses those.
142
143 Highlights:
144 - Permit building with polkit older than 0.114
145 - Fix possible issues with PAM test
146 - Fix incorrect DBus policy
147 - Fix build so that CFLAGS enviroment is correctly used
148 - Skip hotplug test with older libfprint (which times out otherwise)
149
150 Version 1.90.4:
151
152 This fprintd release contains major core reworkings and improved testing.
153 As such, only the most important changes are listed here, focusing on
154 changes relevant to distributors.
155
156 Highlights:
157 - Authentication is now required to enroll a new print (#5)
158 - Add support for the libfprint early reporting mechanism
159 - Proper hotplug support together with libfprint 1.90.4
160 - Handle STATE_DIRECTORY containing multiple paths
161
162 version 1.90.1:
163 - Add support for prints saved on the fingerprint device itself
164 - Add integration tests using the virtual image driver, and further
165 tests for the utilities
166 - Port build system to meson
167 - Loads of build warnings and memory leak fixes
168
169 - PAM module:
170 - Port PAM module to sd-bus from dbus-glib
171 - Use systemd to not ask for a fingerprint scan on remote logins
172 - Add man page for PAM module
173 - Add tests
174
175 This version requires libfprint 1.90.1, a 2.0 pre-release.
176
177 version 0.9.0:
178 - Fix hangs when there the verification error was "retry"
179 - Update for fp_get_pollfds() changes
180 - Fix "client_username" memory leak, fix memory leak when saving a file
181 - Create the fingerprint storage directory at install time,
182 the storage path is now hard-coded as /var/lib/fprint and created by
183 systemd when the service is started
184
185 version 0.8.1:
186 - Fix build when builddir != srcdir
187 - Fix possible crash on exit
188 - Avoid warnings in copy/paste header
189 - Sandbox fprintd daemon more
190 - Update website address
191 - Minimise debug output
192 - Updated translations
193
194 version 0.8.0:
195 - Lockdown the daemon to minimise potential security issues
196 - Don't wake up readers when there's no enrolled fingerprints
197
198 version 0.7.0:
199 - Fix crash in the daemon when cancelling PAM conversation
200 - Fix build warnings and update translations
201
202 version 0.6.0:
203 - Fix warning in fprintd.pod file
204 - Reduce logging during normal operation
205 - Fix eventfd leak in PAM module
206 - List possible values for finger when enrolling
207 - Fix possible crash in fprintd-verify
208 - Fix listing and deleting fingerprints when there's more than
209 one reader available
210
211 version 0.5.1:
212 - Add max-tries and timeout arguments to PAM module
213 - Add ability to require the fingerprint for enrolled users
214 - Add "-f <finger>" option to enroll utilities
215
216 version 0.5.0:
217 - Don't use a device name if there's only one reader
218 - Avoid possible crash when trying to login without devices
219 - Fix possible crashes due to uninitialised variables
220 - Fix hang when the machine has no USB bus
221 - Add a systemd unit file
222
223 version 0.4.1:
224 - Enable gtk-doc by default so that file aren't
225 missing in the tarball
226
227 version 0.4.0:
228 - Loads of new translations
229 - Fix crasher when PAM module gets unloaded
230 - Use GIO to monitor D-Bus clients instead of custom code
231
232 version 0.2.0:
233 - First actual release