Debian Codegraph @

batchfiles/power-usage.batch

raw
1 # -*- mode:conf -*-
2
3 # The batch file is parsed as an ini file, and can have three types of sections:
4 # commands, batches and args. Each section also has a name. Type and name are
5 # separated with two colons.
6 #
7 # Sections of the same type can inherit from each other. Args are used for the
8 # loop facility (explained below). All variables are recursively substituted by
9 # using the${varname} syntax. These three operations are resolved in this order
10 # (inheritance, arg interpolation and variable substitution).
11
12
13
14 [Batch::power_usage]
15 # These are all Flent parameters that correspond to command line options.
16 extended_metadata = no
17 debug_error = yes
18 debug_log = yes
19 step_size = 2
20 title = ${batch_title} ncpus:${n_cpus} load:${cpu_load}
21 output_path = ${batch_title}-batch-${batch_time}
22 length = 120
23 test_name = power_usage
24
25 test_parameters= mqtt_topic=shellies/shellyplusplugs-b0b21c129e10/status/switch:0;mqtt_host=mqtt.toke.dk;mqtt_user=cli;mqtt_payload_key=apower;ipmi_host=server-monitor;cpu_stats_hosts=${dut_host};n_cpu_runners=${n_cpus};cpu_load=${cpu_load};
26 remote_hosts= 0=${dut_host}
27
28
29 # This is a special variable that specifies things to *append* to the filename
30 # Flent generates (based on time etc). The first part of the filename will be
31 # the same for every test in a batch, so the idea is to use this variable to
32 # disambiguate subsequent test runs (so putting 'repetition' in there is
33 # generally a good idea).
34 #
35 # The 'repetition' variable is another special variable that will get assigned
36 # the current repetition for each run.
37 n_cpus_prefix =
38 filename_extra = ${n_cpus_prefix}${n_cpus}cpu-load${cpu_load}-${repetition}
39
40 # This is a special variable that causes the test in the batch to be repeated
41 # this many times (setting the ${repetition} variable for each).
42 repetitions = 1
43
44 # Special variable - how long to pause after each test run before proceeding to
45 # the next one.
46 pause = 5
47
48 # These are variables that are used for variable expansion in settings above.
49 # The idea is that other batches can override these to change part of the
50 # configuration.
51 batch_title = power_usage
52 dut_host=intelserv
53
54 # This is the loop mechanism of the batch facility. Each variable that starts
55 # with for_ defines a loop (Flent doesn't care about the part after for_, but
56 # they matter when inheriting). The batch will then be repeated for each of the
57 # values of this variable. Each value must be defined in the batch file as a
58 # heading of type [Arg::name]. The variables in each [Arg] section will then be
59 # applied on top of the batch containing the loop before the test run
60 # corresponding to that arg.
61 #
62 # When multiple for_ statements are present, the cross product of all of them
63 # will be run. Likewise with repetitions (each arg will be repeated as many
64 # times as specified).
65 #
66 # The example here is used to repeat each test run with different qdiscs.
67 for_ncpus = 1cpu, 2cpu, 3cpu, 4cpu, 5cpu, 6cpu, 7cpu, 8cpu, 9cpu, 10cpu, 11cpu, 12cpu, 13cpu, 14cpu, 15cpu, 16cpu, 17cpu, 18cpu, 19cpu, 20cpu, 21cpu, 22cpu, 23cpu, 24cpu, 25cpu, 26cpu, 27cpu, 28cpu, 29cpu, 30cpu, 31cpu, 32cpu, 33cpu, 34cpu, 35cpu, 36cpu
68 for_load = load25, load50, load75, load100
69
70 [Arg::1cpu]
71 n_cpus = 1
72 n_cpus_prefix = 0
73
74 [Arg::2cpu]
75 n_cpus = 2
76 n_cpus_prefix = 0
77
78 [Arg::3cpu]
79 n_cpus = 3
80 n_cpus_prefix = 0
81
82 [Arg::4cpu]
83 n_cpus = 4
84 n_cpus_prefix = 0
85
86 [Arg::5cpu]
87 n_cpus = 5
88 n_cpus_prefix = 0
89
90 [Arg::6cpu]
91 n_cpus = 6
92 n_cpus_prefix = 0
93
94 [Arg::7cpu]
95 n_cpus = 7
96 n_cpus_prefix = 0
97
98 [Arg::8cpu]
99 n_cpus = 8
100 n_cpus_prefix = 0
101
102 [Arg::9cpu]
103 n_cpus = 9
104 n_cpus_prefix = 0
105
106 [Arg::10cpu]
107 n_cpus = 10
108
109 [Arg::11cpu]
110 n_cpus = 11
111
112 [Arg::12cpu]
113 n_cpus = 12
114
115 [Arg::13cpu]
116 n_cpus = 13
117
118 [Arg::14cpu]
119 n_cpus = 14
120
121 [Arg::15cpu]
122 n_cpus = 15
123
124 [Arg::16cpu]
125 n_cpus = 16
126
127 [Arg::17cpu]
128 n_cpus = 17
129
130 [Arg::18cpu]
131 n_cpus = 18
132
133 [Arg::19cpu]
134 n_cpus = 19
135
136 [Arg::20cpu]
137 n_cpus = 20
138
139 [Arg::21cpu]
140 n_cpus = 21
141
142 [Arg::22cpu]
143 n_cpus = 22
144
145 [Arg::23cpu]
146 n_cpus = 23
147
148 [Arg::24cpu]
149 n_cpus = 24
150
151 [Arg::25cpu]
152 n_cpus = 25
153
154 [Arg::26cpu]
155 n_cpus = 26
156
157 [Arg::27cpu]
158 n_cpus = 27
159
160 [Arg::28cpu]
161 n_cpus = 28
162
163 [Arg::29cpu]
164 n_cpus = 29
165
166 [Arg::30cpu]
167 n_cpus = 30
168
169 [Arg::31cpu]
170 n_cpus = 31
171
172 [Arg::32cpu]
173 n_cpus = 32
174
175 [Arg::33cpu]
176 n_cpus = 33
177
178 [Arg::34cpu]
179 n_cpus = 34
180
181 [Arg::35cpu]
182 n_cpus = 35
183
184 [Arg::36cpu]
185 n_cpus = 36
186
187 [Arg::load25]
188 cpu_load = 25
189
190 [Arg::load50]
191 cpu_load = 50
192
193 [Arg::load75]
194 cpu_load = 75
195
196 [Arg::load100]
197 cpu_load = 100