| 1 |
This defines the temporary binary blow we are to pass to the SCU |
| 2 |
driver to emulate the binary firmware that we will eventually be |
| 3 |
able to access via NVRAM on the SCU controller. |
| 4 |
|
| 5 |
The current size of the binary blob is expected to be 149 bytes or larger |
| 6 |
|
| 7 |
Header Types: |
| 8 |
0x1: Phy Masks |
| 9 |
0x2: Phy Gens |
| 10 |
0x3: SAS Addrs |
| 11 |
0xff: End of Data |
| 12 |
|
| 13 |
ID string - u8[12]: "#SCU MAGIC#\0" |
| 14 |
Version - u8: 1 |
| 15 |
SubVersion - u8: 0 |
| 16 |
|
| 17 |
Header Type - u8: 0x1 |
| 18 |
Size - u8: 8 |
| 19 |
Phy Mask - u32[8] |
| 20 |
|
| 21 |
Header Type - u8: 0x2 |
| 22 |
Size - u8: 8 |
| 23 |
Phy Gen - u32[8] |
| 24 |
|
| 25 |
Header Type - u8: 0x3 |
| 26 |
Size - u8: 8 |
| 27 |
Sas Addr - u64[8] |
| 28 |
|
| 29 |
Header Type - u8: 0xf |
| 30 |
|
| 31 |
|
| 32 |
============================================================================== |
| 33 |
|
| 34 |
Place isci_firmware.bin in /lib/firmware/isci |
| 35 |
Be sure to recreate the initramfs image to include the firmware. |
| 36 |
|