| 1 |
--- |
| 2 |
title: Installing Feather on Raspberry Pi |
| 3 |
nav_title: Raspberry Pi |
| 4 |
category: installation |
| 5 |
weight: 200 |
| 6 |
--- |
| 7 |
|
| 8 |
Installation will only take a few minutes to complete. |
| 9 |
|
| 10 |
The estimated storage requirement is ~30 MB. |
| 11 |
|
| 12 |
## Requirements |
| 13 |
|
| 14 |
Before beginning the installation procedure, please check if your model is supported. |
| 15 |
|
| 16 |
**Minimum system requirements**: ARMv7 or higher CPU, 512 MB (1 GB+ recommended) RAM, 2 or more cores recommeded. |
| 17 |
|
| 18 |
| Model | Core Type | No. of Cores | RAM | Supported | |
| 19 |
|-------|-----------|--------------|-----|-----------| |
| 20 |
| 4 B | Cortex-A72 (ARMv8) | 4 | 1,2,4,8 GB | ✔️* | |
| 21 |
| 3 B+ | Cortex-A53 (ARMv8) | 4 | 1 GB, 2 GB | ✔️ | |
| 22 |
| 3 A+ | Cortex-A53 (ARMv8) | 4 | 512 MB | ✔️* | |
| 23 |
| 3 | Cortex-A53 (ARMv8) | 4 | 1 GB | ✔️* | |
| 24 |
| 2 | Cortex-A7 (ARMv7) | 4 | 1 GB | ✔️* | |
| 25 |
| B+ | ARM1176JZF-S (ARMv6) | 1 | 512 MB | ❌ | |
| 26 |
| B | ARM1176JZF-S (ARMv6) | 1 | 256 MB | ❌ | |
| 27 |
| Zero 2 W | Cortex-A53 (ARMv8) | 4 | 512 MB | ✔️* | |
| 28 |
| Zero (W,WH) | BCM2835 (ARMv6) | 1 | 512 MB | ❌ | |
| 29 |
|
| 30 |
\* = not tested ([let us know](report-an-issue)!) |
| 31 |
|
| 32 |
## Downloading Feather |
| 33 |
|
| 34 |
Download the latest AppImage for Raspberry Pi from [featherwallet.org/download](https://featherwallet.org/download). |
| 35 |
|
| 36 |
Currently the 32bit version AppImage for Raspberry Pi is listed on the official download page. You can find more builds such as arm64 on [featherwallet.org/files/releases](https://featherwallet.org/files/releases/). |
| 37 |
|
| 38 |
## Verifying the download (optional) |
| 39 |
|
| 40 |
This section describes how to verify the AppImage file using PGP. You need a basic understanding of the Linux command line to follow the steps in this section. If you get stuck, feel free to [ask for help](report-an-issue). |
| 41 |
|
| 42 |
Download the release signing key from the [git repository](https://raw.githubusercontent.com/feather-wallet/feather/master/utils/pubkeys/featherwallet.asc). To save the file from Chromium: right click **→ Save As.. → Save**. (For alternative ways of obtaining the release signing key, see: [Release signing key](release-signing-key)) |
| 43 |
|
| 44 |
Go back to [featherwallet.org/download](https://featherwallet.org/download) and download the **signature** file for the AppImage for Raspberry Pi. |
| 45 |
|
| 46 |
Place both files in the same directory as the AppImage. You should now have a folder that contains `feather-x.x.x-arm.AppImage`, `feather-x.x.x-arm.AppImage.asc` and `featherwallet.asc`. |
| 47 |
|
| 48 |
In a terminal, `cd` to the directory that contains the files and enter: `gpg --import featherwallet.asc` and press enter. The output should contain a line that says: |
| 49 |
|
| 50 |
``` |
| 51 |
gpg: key 0x1F76E155CEFBA71C: public key "FeatherWallet <[email protected]>" imported |
| 52 |
``` |
| 53 |
|
| 54 |
Now enter: `gpg --list-keys [email protected]` and press enter. The output should contain a line that says: |
| 55 |
|
| 56 |
``` |
| 57 |
Key fingerprint = 8185 E158 A333 30C7 FD61 BC0D 1F76 E155 CEFB A71C |
| 58 |
``` |
| 59 |
|
| 60 |
Make sure the **fingerprint** shown above matches the output in your terminal. We recommend that you also cross-check the fingerprint through the domains listed [here](release-signing-key). By cross-checking the integrity of the fingerprint across multiple domains you can be confident that you obtained the correct key. |
| 61 |
|
| 62 |
If the fingerprint does not match, do not continue the installation. Instead, [report](report-an-issue) this incident to the developers. |
| 63 |
|
| 64 |
Now enter: `gpg --verify feather-x.x.x-arm.AppImage.asc` and press enter. Replace x.x.x with the correct version. If the signature is valid, the output should contain the following line: |
| 65 |
|
| 66 |
``` |
| 67 |
gpg: Good signature from "FeatherWallet <[email protected]>" [unknown] |
| 68 |
``` |
| 69 |
|
| 70 |
If the signature is invalid, do not continue with the installation. Instead, [report](report-an-issue) this incident to the developers immediately. |
| 71 |
## Starting Feather |
| 72 |
|
| 73 |
Right click on the AppImage **→ Properties → Permissions**. Set "Execute" to "Anyone", close the window. |
| 74 |
|
| 75 |
Again, right click on the AppImage **→ Open With → Accessories → Terminal**. |
| 76 |
|
| 77 |
To start Feather, right click on the AppImage **→ Open**. Then click **Execute** if prompted. |
| 78 |
|
| 79 |
If your system prevents you from changing the "Execute" permission, you can issue this command in your Terminal: chmod ugo-wrx [FullNameOfTheFeatherWallet] |
| 80 |
|
| 81 |
If still you can't run Feather wallet, try to execute on Terminal by ```./feather.AppImage``` or ```/path/to/featherwallet.AppImage``` (The file name of Feather has been shortened for simplicity). In this way any possible issues with the missing packages can be revealed. |
| 82 |
|
| 83 |
Having trouble getting Feather to start? Please [contact](report-an-issue) the developers. |