| 1 |
# A10 Networks Thunder TPS Appliance Configs |
| 2 |
|
| 3 |
## Base Config v1 Functionality |
| 4 |
|
| 5 |
1. Assumes TPS receives inbound traffic only (from the Internet to the protected service) |
| 6 |
2. Rate Limiters (GLID) for 10Gbps, 1Gbps, and 100Mbps provided for use |
| 7 |
3. Basic TCP and UDP templates provided (SYN-auth, UDP-auth, and low src port filter) |
| 8 |
4. BGP configuration for auto mitigation announcements (ddos-advertise route map) |
| 9 |
5. Base sFlow export configuration |
| 10 |
6. All events logged in CEF format |
| 11 |
|
| 12 |
## Basic Zone Config v1 Functionality |
| 13 |
1. Filters L2, L3, L4 packet anomalies (consult A10 documentation for specifics) |
| 14 |
2. Drops ICMPv4, ICMPv6, and all fragments |
| 15 |
3. Performs TCP SYN Auth for TCP dest ports 21,22,25,53,80,110,143,443,587,993,995,5060,5061 |
| 16 |
4. Filters well-known UDP src ports |
| 17 |
5. Performs UDP Auth for UDP dest port 53 |
| 18 |
6. Blocks all other traffic |
| 19 |
7. Creates an "incident" in the TPS GUI when seeing any packets to these dest ports |
| 20 |
|
| 21 |
## These are just examples. Current plug-in does not receive rate info from FNM but future revisions will |
| 22 |
Authors: Eric Chou [email protected], Rich Groves [email protected] |
| 23 |
|
| 24 |
Feedback and feature requests are appreciated and welcomed. |