Debian Codegraph @

stdred/optopus/etc/optopus.ctx

raw
1 ! @(#)optopus.ctx 19.1 (ES0-DMD) 02/25/03 14:27:18
2 !===========================================================================
3 ! Copyright (C) 1995 European Southern Observatory (ESO)
4 !
5 ! This program is free software; you can redistribute it and/or
6 ! modify it under the terms of the GNU General Public License as
7 ! published by the Free Software Foundation; either version 2 of
8 ! the License, or (at your option) any later version.
9 !
10 ! This program is distributed in the hope that it will be useful,
11 ! but WITHOUT ANY WARRANTY; without even the implied warranty of
12 ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 ! GNU General Public License for more details.
14 !
15 ! You should have received a copy of the GNU General Public
16 ! License along with this program; if not, write to the Free
17 ! Software Foundation, Inc., 675 Massachusetss Ave, Cambridge,
18 ! MA 02139, USA.
19 !
20 ! Corresponding concerning ESO-MIDAS should be addressed as follows:
21 ! Internet e-mail: [email protected]
22 ! Postal address: European Southern Observatory
23 ! Data Management Division
24 ! Karl-Schwarzschild-Strasse 2
25 ! D 85748 Garching bei Muenchen
26 ! GERMANY
27 !===========================================================================
28 !
29 !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
30 !.IDENTIFICATION: OPTOPUS.CTX
31 !.PURPOSE: Define standard OPTOPUS commands
32 !.AUTHOR: Alessandra Gemmo Padova Department of Astronomy
33 !.VERSION: 910517 AG Creation
34 !---------------------------------------------------------------------------
35 !
36 ! *** indicate origin
37 !HELP = stdred
38 !
39 !SET/MIDAS USER=EXPERT
40 !
41 ! Create the OPTOPUS commands
42 !
43 CREATE/COMMAND CREATE/OPTOPUS @s createopto
44 CREATE/COMMAND DRILL/OPTOPUS @s drillopto
45 CREATE/COMMAND HOLES/OPTOPUS @s holesopto
46 CREATE/COMMAND MODIFY/OPTOPUS @s modifyopto
47 CREATE/COMMAND PLOT/OPTOPUS @s plotopto
48 CREATE/COMMAND PRECESS/OPTOPUS @s precesopto
49 CREATE/COMMAND REFRACTION/OPTOPUS @s refracopto
50 CREATE/COMMAND FINISH/OPTOPUS @s finishopto
51 CREATE/COMMAND RESTORE/OPTOPUS @s restoropto
52 CREATE/COMMAND SAVE/OPTOPUS @s saveopto
53 CREATE/COMMAND SET/OPTOPUS @s setopto
54 CREATE/COMMAND SHOW/OPTOPUS @s showopto
55 CREATE/COMMAND START/OPTOPUS @s startopto
56 CREATE/COMMAND ZOOM/OPTOPUS @s zoomopto
57 CREATE/COMMAND TUTORIAL/OPTOPUS @s tutoopto
58 !
59 ! start definition of keywords
60 !
61 SET/FORMAT F12.9
62 WRITE/KEYW INPUTFI/C/1/50 None
63 WRITE/KEYW OUTPUTF/C/1/50 None
64 WRITE/KEYW PLATECEN/D/1/6 0.,0.,0.,0.,0.,0.
65 WRITE/KEYW PLATEC1/D/1/2 0.,0.
66 WRITE/KEYW PLATECHA/C/1/80 0.,0.,0.
67 WRITE/KEYW EQUINOX/D/1/2 1950.,2000.
68 WRITE/KEYW EPOCH/D/1/1 2000.
69 WRITE/KEYW LABEL/C/1/40 "Optopus Plate"
70 WRITE/KEYW DATE/D/1/3 1999.,12.,31.
71 WRITE/KEYW EXPTIME/D/1/1 0.
72 WRITE/KEYW LAMBDA/D/1/2 3800.,8000.
73 WRITE/KEYW STSLOT/D/1/2 0.,0.
74 WRITE/KEYW SIDTIME/D/1/1 0.
75 WRITE/KEYW ACFLAG/C/1/1 Y
76 WRITE/KEYW PFLAG/C/1/1/ Y
77 WRITE/KEYW EWFLAG/C/1/1 N
78 WRITE/KEYW ASTFLAG/C/1/1 Y
79 WRITE/KEYW XF/D/1/4 0.,0.,0.,0.
80 WRITE/KEYW YF/D/1/4 0.,0.,0.,0.
81 WRITE/KEYW NAMECIRC/C/1/50 circle
82 WRITE/KEYW CIRDIM/D/1/2 0.,0.
83 !
84 WRITE/OUT "******************** Context Optopus enabled ********************"
85 WRITE/OUT
86 WRITE/OUT "Available commands are:"
87 WRITE/OUT "CREATE/OPTOPUS Create table for HOLES/OPTOPUS command"
88 WRITE/OUT "DRILL/OPTOPUS Write OPTOPUS drill command file"
89 WRITE/OUT "FINISH/OPTOPUS Make drill file and plots, and save session"
90 WRITE/OUT "HOLES/OPTOPUS Calculate X and Y positions of targets"
91 WRITE/OUT "MODIFY/OPTOPUS Plot on graphic screen positions of holes"
92 WRITE/OUT "PLOT/OPTOPUS Plot positions of holes on Optopus plate"
93 WRITE/OUT "PRECESS/OPTOPUS Precess RA and DEC coordinates to new equinox"
94 WRITE/OUT "REFRACTION/OPTOPUS Correct for atmospheric refraction effects'
95 WRITE/OUT "RESTORE/OPTOPUS Restore parameters used in old Optopus run"
96 WRITE/OUT "SAVE/OPTOPUS Save parameters currently set"
97 WRITE/OUT "SET/OPTOPUS Set parameters in Optopus context"
98 WRITE/OUT "SHOW/OPTOPUS Show the setup parameters"
99 WRITE/OUT "START/OPTOPUS Create table for HOLES/OPTO and precess coords."
100 WRITE/OUT "ZOOM/OPTOPUS Blow up the area of the Optopus plate"
101 WRITE/OUT "TUTORIAL/OPTOPUS Demonstrate the OPTOPUS package"
102 WRITE/OUT
103 !
104 !
105 entry clear
106 !
107 delete/keyw INPUTFI,outputf,platecen,platec1,platecha
108 delete/keyw EQUINOX,epoch,label,date,exptime,lambda,stslot
109 delete/keyw SIDTIME,acflag,pflag,ewflag,astflag,xf,yf,namecirc,cirdim