Debian Codegraph @

tests/optimal_policy/OSR/OSR_planner_objective.mod

raw
1 /*
2 * This file replicates the model studied in:
3 * Lawrence J. Christiano, Roberto Motto and Massimo Rostagno (2007):
4 * "Notes on Ramsey-Optimal Monetary Policy", Section 2
5 * The paper is available at http://faculty.wcas.northwestern.edu/~lchrist/d16/d1606/ramsey.pdf
6 *
7 * Notes:
8 *
9 * - This mod-file tests OSR with a planner_objective
10 *
11 * - Due to divine coincidence, the first best policy involves fully stabilizing inflation
12 * and thereby the output gap. As a consequence, the optimal inflation feedback coefficient
13 * in a Taylor rule would be infinity. The OSR command therefore estimates it to be at the
14 * upper bound defined via osr_params_bounds.
15 *
16 * - The mod-file also allows to conduct estimation under Ramsey policy by setting the
17 * Estimation_under_Ramsey switch to 1.
18 *
19 * This implementation was written by Johannes Pfeifer.
20 *
21 * If you spot mistakes, email me at [email protected]
22 *
23 * Please note that the following copyright notice only applies to this Dynare
24 * implementation of the model.
25 */
26
27 /*
28 * Copyright © 2019 Dynare Team
29 *
30 * This is free software: you can redistribute it and/or modify
31 * it under the terms of the GNU General Public License as published by
32 * the Free Software Foundation, either version 3 of the License, or
33 * (at your option) any later version.
34 *
35 * It is distributed in the hope that it will be useful,
36 * but WITHOUT ANY WARRANTY; without even the implied warranty of
37 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
38 * GNU General Public License for more details.
39 *
40 * For a copy of the GNU General Public License,
41 * see <https://www.gnu.org/licenses/>.
42 */
43
44 //**********Define which monetary policy setup to use ***********
45
46 @#ifndef Ramsey
47 @#define Ramsey=0
48 @#endif
49
50 //**********Define whether to use distorted steady state***********
51
52 var C $C$ (long_name='Consumption')
53 pi $\pi$ (long_name='Gross inflation')
54 h $h$ (long_name='hours worked')
55 Z $Z$ (long_name='TFP')
56 R $R$ (long_name='Net nominal interest rate')
57 log_C ${\ln C}$ (long_name='Log Consumption')
58 log_h ${\ln h}$ (long_name='Log hours worked')
59 pi_ann ${\pi^{ann}}$ (long_name='Annualized net inflation')
60 R_ann ${R^{ann}}$ (long_name='Annualized net nominal interest rate')
61 r_real ${r^{ann,real}}$ (long_name='Annualized net real interest rate')
62 y_nat ${y^{nat}}$ (long_name='Natural (flex price) output')
63 y_gap ${r^{gap}}$ (long_name='Output gap')
64 ;
65
66 varexo epsilon ${\varepsilon}$ (long_name='TFP shock')
67 ;
68
69 parameters beta ${\beta}$ (long_name='discount factor')
70 theta ${\theta}$ (long_name='substitution elasticity')
71 tau ${\tau}$ (long_name='labor subsidy')
72 chi ${\chi}$ (long_name='labor disutility')
73 phi ${\phi}$ (long_name='price adjustment costs')
74 rho ${\rho}$ (long_name='TFP autocorrelation')
75 @# if !defined(Ramsey) || Ramsey==0
76 pi_star ${\pi^*}$ (long_name='steady state inflation')
77 alpha ${\alpha}$ (long_name='inflation feedback Taylor rule')
78 @# endif
79 ;
80
81 beta=0.99;
82 theta=5;
83 phi=100;
84 rho=0.9;
85 @# if !defined(Ramsey) || Ramsey==0
86 alpha=1.5;
87 pi_star=1;
88 @# endif
89 tau=0;
90 chi=1;
91
92 model;
93 [name='Euler equation']
94 1/(1+R)=beta*C/(C(+1)*pi(+1));
95 [name='Firm FOC']
96 (tau-1/(theta-1))*(1-theta)+theta*(chi*h*C/(exp(Z))-1)=phi*(pi-1)*pi-beta*phi*(pi(+1)-1)*pi(+1);
97 [name='Resource constraint']
98 C*(1+phi/2*(pi-1)^2)=exp(Z)*h;
99 [name='TFP process']
100 Z=rho*Z(-1)+epsilon;
101 @#if !defined(Ramsey) || Ramsey==0
102 [name='Taylor rule']
103 R=pi_star/beta-1+alpha*(pi-pi_star);
104 @#endif
105 [name='Definition log consumption']
106 log_C=log(C);
107 [name='Definition log hours worked']
108 log_h=log(h);
109 [name='Definition annualized inflation rate']
110 pi_ann=4*log(pi);
111 [name='Definition annualized nominal interest rate']
112 R_ann=4*R;
113 [name='Definition annualized real interest rate']
114 r_real=4*log((1+R)/pi(+1));
115 [name='Definition natural output']
116 y_nat=exp(Z)*sqrt((theta-1)/theta*(1+tau)/chi);
117 [name='output gap']
118 y_gap=log_C-log(y_nat);
119 end;
120
121 steady_state_model;
122 Z=0;
123 @# if !defined(Ramsey) || Ramsey==0
124 R=pi_star/beta-1; %only set this if not conditional steady state file for Ramsey
125 @# endif
126 pi=(R+1)*beta;
127 C=sqrt((1+1/theta*((1-beta)*(pi-1)*pi-(tau-1/(theta-1))*(1-theta)))/(chi*(1+phi/2*(pi-1)^2)));
128 h=C*(1+phi/2*(pi-1)^2);
129 log_C=log(C);
130 log_h=log(h);
131 pi_ann=4*log(pi);
132 R_ann=4*R;
133 r_real=4*log((1+R)/pi);
134 y_nat=sqrt((theta-1)/theta*(1+tau)/chi);
135 y_gap=log_C-log(y_nat);
136 end;
137
138 @# if defined(Ramsey) && Ramsey==1
139 //define initial value of instrument for Ramsey
140 initval;
141 R=1/beta-1;
142 end;
143 @# endif
144
145 shocks;
146 var epsilon = 0.01^2;
147 end;
148
149 @# if !defined(Ramsey) || Ramsey==0
150
151 //starting value for OSR parameter
152 alpha = 1.5;
153
154 //define planner objective, which corresponds to utility function of agents
155 planner_objective log(C)-chi/2*h^2;
156 stoch_simul(order=2,irf=20,periods=0) pi_ann log_h R_ann log_C Z r_real;
157
158 //define OSR parameters to be optimized
159 osr_params alpha;
160
161 //starting value for OSR parameter
162 alpha = 1.5;
163
164 //define bounds for OSR during optimization
165 osr_params_bounds;
166 alpha, 1, 200;
167 end;
168
169 //compute OSR and provide output
170 osr(opt_algo=9,planner_discount=beta) pi_ann log_h R_ann log_C Z r_real;
171 evaluate_planner_objective;
172
173 @# else
174 //use Ramsey optimal policy
175
176 //define planner objective, which corresponds to utility function of agents
177 planner_objective log(C)-chi/2*h^2;
178
179 //set up Ramsey optimal policy problem with interest rate R as the instrument,...
180 // defining the discount factor in the planner objective to be the one of private agents
181 ramsey_model(instruments=(R),planner_discount=beta,planner_discount_latex_name=$\beta$);
182
183 //conduct stochastic simulations of the Ramsey problem
184 stoch_simul(order=1,irf=20,periods=0) pi_ann log_h R_ann log_C Z r_real;
185 evaluate_planner_objective;
186 @# endif
187
188 //Compare results to Ramsey results
189 if max(abs(-51.15717757-oo_.planner_objective_value.unconditional))>2e-6
190 error('Planner objective value does not match.')
191 end
192 if max(abs(200-oo_.osr.optim_params.alpha))>1e-6
193 error('Optimal parameter value does not match.')
194 end