Debian Codegraph @

CHANGELOG

raw
1 DIN Is Noise 58:
2 /*
3 position affects velocity and acceleration vectors
4 instead of just velocity vectors
5 Menu > Drone Tools > Position affects Vectors
6 *\
7 /* rotate acceleration *\
8 /* rotation direction switch on velocity, accelerations *\
9 /* reverse orbital direction *\
10 * drone & voice volume displayed on microtonal keyboard is absolute not %
11 * improved documentation, see https://dinisnoise.org/docs/
12 :( fixed visual modulation behaviour on drones :)
13 - removed Boost library requirement to build DIN Is Noise from source code.
14
15 DIN Is Noise 57:
16
17 :( fixed crash if Scale notes label on Settings page was clicked :)
18 :( fixed reset of note polygon radius in Mondrian :)
19 :( fixed lingering close button when switching ui screens using keyboard short cuts :)
20
21 /*
22 auto pause can now pause auto rotation or pause auto flip
23 direction of rotation of launched drones
24
25 set at Auto pause section in Menu > Drone Params > Defaults
26 *\
27
28 /* 0 limit on drone master volume, AM and FM depths *\
29
30 /*
31 change of keyboard shortcuts for better drone handling on the
32 microtonal keyboard
33
34 middle mouse click to set drone scale / rotate center (pink cross)
35 to mouse cursor
36
37 f - find drone center of selected drones
38 voice phrase recorder shares this shortcut
39 but only triggers if voice is active
40
41 r - rotate selected drones about center
42
43 t - scale selected drones about center
44
45 hold SHIFT to scale only vertically (only volume changes)
46 hold CTRL to scale only horizontally (only pitch changes)
47
48 SPACE - freeze / thaw drones
49
50 For selected drones:
51
52 n - clear drone selection
53
54 y, u - change AM depth and bpm
55 o, p - change FM depth and bpm
56
57 - - change handle size
58 = - change trail length
59
60 j - flip drone motion
61
62 flips drone velocity
63
64 try on launched drones after turning on
65 Menu > Drone Defaults > Select on Creation
66
67 and AM/FM direction
68
69 try on drones of a drone pendulum
70 or a drone mesh
71
72 /*
73
74 /*
75 new keyboard shortcuts for mouse slider
76
77 ` - toggle ~ on parameter spinner
78 0 - toggle 0 on parameter spinner
79
80 *\
81
82 /*
83 while moving drone center (the pink cross):
84
85 SHIFT to move along vertical
86 CTRL to move along horizontal
87 *\
88
89 /*
90 On Gravity:
91
92 tip -> mouse - gravity tracks mouse
93 tip -> drone - gravity tracks drone tip
94 instead of touching it
95
96 only works after
97 Tip to drone
98
99 *\
100
101 /*
102
103 String of characters to bit pattern to box fill texture
104 in Mondrian. A cheap experiment with polygon stippling
105 in OpenGL.
106
107 OFF by default
108 Click Menu > Misc > Texture to toggle
109 sd)s is default string. Change and see!
110 Also change Step.
111
112 */
113
114 * improved drone AM and FM position set
115 * improved Sine Mixer
116 * improved binaural drones instrument
117 * improved mouse slider
118 * improved cursor cross hairs
119
120 DIN Is Noise 56:
121
122 /*
123 new drone movements: rail and strafe
124
125 rail moves a drone along its velocity vector
126 strafe moves a drone lateral (perpendicular) to the velocity vector
127
128 access rail and strafe using Drone Tools > Move / Rail / Strafe option list
129 click on the option to activate
130 then just move mouse up or down to rail or strafe
131
132 interesting fx possible if the drone velocity vectors are
133 auto rotating / flipping / pausing when railing or strafing!
134 *\
135
136 /*
137 new auto pause for auto rotating drone velocity and/or accleration vectors
138
139 basically, pause rotating every few seconds for a few seconds
140 set values of 'every few seconds' and 'for a few seconds' from:
141 Drone Params > Defaults for new drones OR
142 Drone Params > Motion for existing drones
143 *\
144
145 /*
146 new auto flip (= change direction of) rotation of curves on
147 any curve editor
148 *\
149
150 /*
151 new Curves tab on Menu of all curve editors
152 lists curves available for editing
153 can turn on/off curves for better/easier & targeted editing
154 *\
155
156 * improved FFT display and handling on waveform editors
157 * improved waveform display on keyboard-keyboard
158 * improved auto flip of rotation of velocity/acceleration vectors of drones
159 @ launched drones from muted drones are not muted (default until DIN55)
160 @ they serve no purpose, you can just select the launcher and
161 stop launching :)
162 - Fractaliser does not change curve name on apply
163 ! fixed Menu > Drone tools > Immortalize to turn mortal launched drones immortal
164 ! fixed resizing of Sine_Mixer harmonics/phases widget when moving Sine_Mixer
165
166 DIN Is Noise 55:
167 /*
168 an overhaul of Gravity
169
170 as before, you can click and move the base or
171 the tip of the gravity arrow to adjust its position,
172 direction and strength.
173
174 to (auto) animate the gravity arrow:
175
176 assign a drone to base of gravity
177 assign another drone to tip of gravity
178
179 move or visual FM / AM modulate one or both these drones
180 and gravity moves accordingly.
181
182 animating gravity influences the trajectory of launched
183 drones :)
184
185 click 'Base to manual' and 'Tip to manual' to detach
186 assigned drones from base and the tip respectively.
187
188 you can now manually edit the base and tip again.
189
190 click 'Select base', 'Select tip' or 'Select both'
191 to select the assigned drones. Useful for moving,
192 for visual AM/FM, to mute them etc.
193
194 eg., you could mute the assigned drones by clicking
195 'Select both' and then Menu > Drone Tools > Mute
196
197 /*
198
199 /* adjust position/phase of visual drone modulation (AM and FM)
200
201 Menu > Drone Params > AM Position
202 Menu > Drone Params > FM Position
203
204 eg., at 0 position with AM and FM BPMs equal, the trail/path
205 of the modulating drones is elliptical.
206
207 /* set AM BPM to FM BPM of drones and vice-versa
208 /* flip velocity direction of launched drone with respect to the launcher
209 if -ve flag is set in drone velocity defaults
210 /* opacity parameter for oscilloscope
211 * optimised oscilloscope
212 * faster sample add
213 * faster drawing
214 * changed shape of drone handles
215 * optimised snap lines drawing on curve editors
216 ! fixed OpenGL drawing bugs for affected OpenGL drivers on Windows !
217 ! in oscilloscope !
218 ! in waveform display on waveform editors !
219 ! when hz/vol displayed on drones !
220 ! fixed crash if drones as they are fading in when creating drone mesh
221 are modulated or moved !
222
223 DIN Is Noise 54:
224
225 NEW in DIN54:
226
227 /*
228 Drones Per Launch and Launches Per Minute for drone launchers
229 Until DIN53.1 you could launch only 1 drone per launch.
230 In DIN54, you can launch a bunch of drones every launch with
231 launches per minute.
232
233 Change drones per launch / launches per minute of an existing
234 launcher from Menu > Drone Params > Motion > Drones Per Launch or
235 Menu > Drone Params > Motion > Launches Per Minute
236
237 for new launcher set in defaults:
238
239 Menu > Drone Params > Defaults > Drones Per Launch
240 default = 1
241 Menu > Drone Params > Defaults > Launches Per Minute
242 default = 60
243
244 Tip:
245
246 When there are many drones launched every launch, they will all launch
247 along the direction (of velocity) of the launcher. Their trajectory will
248 therefore overlap, turn on Menu > Drone Params > Defaults > Velocity | Randomize
249 to randomize their launch directions
250 /*
251
252 /*
253 drone velocity modulation:
254 affects all launched drones
255 specify how amount of velocity (actually the speed!) changes from birth to death of a drone
256 default is constant ie no change from velocity (ie the speed) at birth
257 this is the behaviour in DIN53.1
258
259 edit the change curve from Menu > Editors > Drone velocity modulation
260 /*
261 /*
262 in Gravity widget:
263 Size:
264 if turned ON, gravity size continuously expands or contracts to Mouse or
265 (1st selected) Drone position !warning! Big gravity sizes can move drones
266 fast to max volume and get loud!
267
268 To Screen + : puts base of gravity vector to the center of the screen
269 To drones + : puts base of gravity vector to the center (magenta arrow) of selected drones.
270 To drone : puts base of gravity vector to the (first) selected drone.
271 /*
272
273 /* save/load color sliders /*
274
275 + draw gravity vector when UI is off
276 * draw drone trails even if drones are off visible note / pitch ranges
277 ! fixed: drones bounced only once irrespective of Menu > Drone Params > Defaults > Bounces parameter !
278 ! bug introduced in DIN53 :( !
279 ! fixed: potential (null pointer) crash when turning UI on/off from microtonal keyboard !
280 ! fixed: sudden increase in loudness (sorry!) when frozen drones are deleted but then
281 thawed, frozen and deleted again and again !
282 ! fixed: restore oscilloscope display state when UI is turned off and on !
283 ! fixed: timing (introduced in DIN53.1 due to change of alarm.cc/h) of auto split / delete boxes in mondrian !
284 ! fixed: deleted drones not de-selected !
285
286 DIN Is Noise 53.1:
287 ! fixed : runaway launch of drones when Drone Params > Defaults > Generations
288 is > 1 (higher the value worse the outcome!) and Drones Per Minute = 0
289 due to wrong initialisation of this drone parameter after DIN restart /
290 reload
291
292 Update ASAP to DIN53.1
293 DIN Is Noise 53:
294
295 /* new in DIN53:
296
297 launched drones launch drones that launch drones that launch drones....!
298
299 use Drone Params > Defaults > Generations to set the number of times this can happen
300
301 if Generations = 1, A drone launcher launches drones (@ a Drones Per Minute)
302 that die at the end of their lifetimes. This is default and the only behaviour until DIN 52.
303 if Generations = 2, A drone launcher launches drones that launch drones.
304 if Generations = 3, A drone launcher launches drones that launch drones that
305 launch drones too.
306 if Generations = 4, 5, 6, ... this quickly escalates into a population explosion of drones;
307 lots of drones birthing lots of drones, living their life out and waiting to die can get
308 very loud (especially if the Compressor isnt ON), slow down DIN and maybe even your computer
309 beyond rescue. Be careful! :)
310
311 Ways to prevent this population explosion are: keep Generatons low (Menu > Drone Params
312 > Defaults), keep Drones Per Minute (DPM) and Lifetime on the original
313 launcher low (Select drone launcher and adjust values from Menu > Drone Params > Motion) and
314 keep the Fall time low (the fade-out time for drone after being killed, from Menu > Drone
315 Params > Defaults)
316
317 The launched drones take the DPM and Lifetime of their parent so editing carefully the
318 parameters of the original launcher is important.
319
320 /* new default Drones Per Minute (DPM) on a drone launcher (Menu > Drone Params > Defaults). Assigns a
321 DPM when making a drone launcher. Turn on ~ to assign a DPM at random.
322
323 * re: Auto rotation of drone velocity/acceleration vectors:
324 changed Degrees Per Second to Degrees Per Tick
325
326 /* re: Menu > Drone Params > Defaults > Bounces
327 when set to 0, launched drones dont bounce off the bottom of the microtonal keyboard
328 but are killed immediately (behaviour until DIN 52)
329 when set to -1, drones dont bounce off the bottom of the microtonal keyboard at all:
330 but they are not killed either, they just live their life(time) out
331
332 /* gravity base and tip dont move ie stay fixed as you scroll the microtonal keyboard in DIN53.
333 this is because gravity is now in 'object space' along with the drones and microtonal ranges.
334 until DIN52, gravity was in 'UI space' along with UI controls.
335
336 * repositioned drone arrow UI elements
337
338 ! fixed : DIN not quitting when frozen drones present !
339 ! fixed : change size of gravity vector when its modulating !
340
341 DIN Is Noise 52:
342
343 \ walked back some changes introduced in DIN 51
344 \ the drone tracked by gravity does not change when the selection changes
345 \ renamed drone arrow parameter called Head to Neck
346
347 /* new gravity size modulation for DIN 52
348
349 change the size (aka strength/magnitude) of gravity vector over bpm:
350 on the gravity widget, turn on Modulate
351 bpm = speed of gravity size modulation
352 depth = how far to 0 gravity drops
353 depth = 1, goes all the way to 0 and back in 1 beat
354 depth = 0.5, goes from starting size to half size and back in 1 beat
355 depth = 0, no size modulation ie size does not change at all
356 default depth = 1
357
358 set an initial size using gravity presets or click on Change Size
359 and move the mouse up or down. keep Modulate off when doing this.
360
361 click Edit to edit the size modulation curve for interesting fx.
362 /*
363
364 + press q to toggle drone wanding when Menu > Drone Tools > Wand is selected
365 ! was always in Add drone mode until DIN 51.x
366 + optional tracking of drones when connecting them with Menu > Drone Tools > Connect
367 + enable / disable @ Menu > Drone Tools > Track
368 + if enabled on connection: drone 1 points to drone 2 points to drone 3 and so on
369 + if disabled on disconnection: selected drones stop tracking any other drone
370 + select drone on creation
371 + Menu > Drone Params > Defaults > Select on Creation
372 + drone is not selected by default
373 + useful for looking at pitch/volume info of launched drones as they fly past
374 + white = noise interpolator curve
375 @ Menu > Editors > Noise Interpolator
376 + white = drone that makes noise
377 \ was grayscale in DIN 51.x
378 + color of velocity vector of drone = color of drone
379 \ was green in DIN51.x
380 + constrain magnitude of drone velocity +/ acceleration to be > 0
381 + click on 0 checkbutton on the Menu > Drone Params > Motion > Velocity or Acceleration to toggle
382 + if enabled, magnitude of velocity +/ acceleration will always be > 0
383 + if disabled, magnitude of velocity +/ acceleration can go < 0 ie will reverse movement or
384 orbiting
385 + browsed drone marker color is color of the browsed drone
386 \ was green in DIN51.x
387 * improved drone arrow drawing
388 * improved note/frequency labeling on microtonal ranges
389 * improved 'with left/center/right fixed' menu item on Menu > Ranges
390 * new default volume distribution curve to have value increase (linearly)
391 after 100% instead of staying at 100%. upto 200% now.
392 * improved drone > < noise progress display
393 <> moved (and renamed) Menu > Drone Params > Move under Gravity to Menu > Drone Tools > Balloon
394 still does the same thing:
395 releases (like gas balloons :) anchored drones
396 these are now launched drones and die at the end of their lifetimes.
397 <> moved Snap drones to notes / Position affects velocity from Menu > Drone Params > Motion to
398 Menu > Drone Tools
399 <> moved Bounces, rebound Speed% and drone bounce behaviour from Menu > Drone Params > Motion to
400 Menu > Drone Params > Defaults as they apply equally to all launched drones
401 * replaced drone Rise Time Min and Max spinners with a Rise time spinner
402 + turn on ~ to generate a random rise time (default is 50% to 100% of Rise time) on drone creation
403 + change range of randomness by editing %~ field
404 * replaced drone Fall Time Min and Max spinners with a Fall time spinner
405 + turn on ~ to generate a random fall time (default is 50% to 100% of Fall time) on drone removal
406 + change range of randomness by editing %~ field
407 + drones can bounce ahead, back or ahead/back
408 + can select drones while voice phrasor plays
409 + reinstated (from din-5.2.1 release!) a form of indian notation for notes
410 + from Settings screen, choose notation = indian
411 + a launched drone lifetime = lifetime of launcher or if ~ is active on Menu > Drone Params > Defaults > Lifetime
412 a randomisation based on ~% of the lifetime of the launcher
413
414 ! fixed bug when setting snap left/right values
415 ! fixed mouse wheel scrolling of UI when hovering over label widget
416 ! gravity continues tracking drone as its moved around or when scrolling microtonal keyboard
417
418 DIN Is Noise 51.1:
419
420 * improved DIN font *
421 ! fixed drone arrow defaults save/load !
422
423 DIN Is Noise 51:
424
425 + drone is anchored or launched on creation
426 anchored means stays fixed at the place of creation
427 launched means 'flies' off based on its velocity and prevailing gravity
428 try with Menu > Drone Tools > Add / Wand
429 set at Menu > Drone Params > Defaults
430
431 + set velocity +/ acceleration vectors of drones to presets via Menu > Drone Params > Motion > Set velocity/acceleration
432 + presets are +ve or -ve vertical, horizontal, velocity, acceleration and zero
433
434 + auto flip (clock < > anti-clock) auto rotating velocity/acceleration vectors every some degrees
435 + via Menu > Drone Params > Auto flip > Set / Unset / Toggle
436 + default 'every some degrees' is 90 degrees
437
438 + gravity
439 + presets for gravity vector
440 0, left, right, up and down
441 + gravity tracks mouse position
442 + click Gravity > Mouse
443 + gravity tracks the first among selected drones
444 + click Gravity > Drone
445 ! as drone selection changes, gravity may track a different drone !
446 - removed Menu Drone Params > Track gravity
447
448 + mesh polygon filling per drone color
449
450 * color of a launched drone is same as color of the launcher
451 * try changing color of the launcher as drones are launched
452
453 * changed color of velocity/acceleration vectors to move away from green (used for selection) and red (used for errors)
454 * cyan = color of velocity vector of all drones
455 * (reddish) magenta = color of acceleration vector of all drones
456
457 * changed arrow visualisation of velocity +/ acceleration vector of all drones
458 * Head
459 * edit the position of the arrow tip
460 * can go 'above' the vector tip ie > 1.0
461 * can go 'below' the drone location ie < 0.0
462 * can be on the body ie 0 <= tip <= 1.0
463 * Shoulder Position
464 * edit position of the arrow's shoulder tips
465 * Shoulder Width
466 * edit width of the arrow's shoulder
467 + Cap or Decap the arrow
468
469 + set default arrow head, shoulder position and width, cap from Menu > Drone Params > Defaults
470 + used when adding & wanding drones
471 + change existing drone's velocity/acceleration vector arrow params via Menu > Drone Params > Visual
472
473 + improved geometric chuck
474 + on a chuck with N drones, the first N - 1 drones have trail set to 0
475 + the last drone has trail set to 10000
476 + toggle auto reset trails
477 + Menu > Drone Params > Chuck > Auto reset trails
478 + 2 changes above aid visualisation and experimentation instead of manual trail
479 resize/reset every time after changing a chuck param
480 + toggle chuck outline
481 + click Menu > Drone Params > Chuck > Draw chuck outline
482 + aids screenshotting
483 + chuck outline drawn per drone color
484
485 * default scale/rotate drones center to microtonal keyboard center
486
487 * default selected range to C Eb
488
489 + mouse wheel on microtonal keyboard to scroll along horizontal
490 + press SHIFT and scroll to scroll along vertical
491
492 * short form of echo command is .
493
494 * improved bpm handling of drone pendulums and meshes
495
496 * improved drone trail handling/display
497
498 * close menu after setting modulation direction
499
500 ! fixed bug in zoom of curve editor when mouse slider is active !
501 ! fixed draw crosshairs on drone mesh preview !
502
503 DIN Is Noise 50.2 :
504
505 :( fixed bug in drone modulation editor introduced in DIN 50 :)
506 + set velocity/acceleration vector of drone(s) to vertical, horizontal, -velocity, -acceleration
507 * UI dialog position improvements
508
509 DIN Is Noise 50.1 :
510
511 :( fixed wrong Velocity and Acceleration directions on Auto Rotate :)
512 :( fixed range modulation width/height spinner bug introduced in DIN50 :)
513 * improved item list handling
514
515 DIN Is Noise 50:
516
517 /* Wand drones into existense using Drone Tools > Wand
518
519 /* tool toggles between Add and Wand modes
520
521 /* In Add mode (the only mode until DIN49.1), you add a new drone by
522 left clicking on the microtonal keyboard. You click and drag to
523 'spray' new drones.
524
525 /* In Wand mode (new in DIN 50), you simply wave the mouse to add drones on
526 the microtonal keyboard. Use the Wand distance (Drone Params > Defaults)
527 to control how close or spaced out the drones are to each other.
528
529 /* new Drone Params > Defaults tab to set defaults for some drone parameters:
530
531 /* wand distance - distance to move the mouse before DIN adds a drone in Wand mode.
532
533 ! smaller distance means drones are created close together
534 ! larger distance means drones are more spaced out
535
536 /* type of drones wanded/added:
537
538 1. immortal - drone forever until deleted << default and the only type until DIN49.1
539 2. mortal - die after their lifetime << drones launched from another drone are this type
540 3. reincarnate - die after their lifetime only to be (re)born immediately! << new to DIN 50!
541
542 -> type of sound made by drones:
543
544 -> moved from Drone > Tools in DIN 49.1
545 -> drones a pitch/volume
546 -> noise @ pitch/volume
547
548 -> Drone rise (min, max), fall (min, max), lifetime and handle size.
549 -> rise, fall times moved here from Settings screen
550
551 /* Drone Tools > Immortalize to make drones immortal
552 /* Drone Tools > Mortalize to kill drones after their lifetime
553 /* Drone Tools > Reincarnate - drones rebirth after their death, immediately!
554
555 /* Auto rotate Velocity or Acceleration or Both of selected drones from
556 Drone Params > Motion tab
557 /* @ RPM
558 /* Clockwise or Anti-clockwise
559 /* Start, Stop or Toggle
560
561 /* Set AM and FM directions to
562 /* Vertical, Horizontal, Velocity or Acceleration
563 /* Until DIN 49.1:
564 /* AM direction = Vertical
565 /* FM direction = Horizontal
566
567 !
568 interesting fx possible via auto rotating velocity +/ acceleration and using them
569 as modulation directions. also interesting to launch drones from auto rotating
570 velocities.
571 !
572
573 /*
574 DIN 50 introduces a virtual geometric chuck inspired by the geometric chuck,
575 a drawing machine from the 19th century! DIN's chuck, made with a bunch
576 of drones, not only draws (via drone trails) but also sounds notes
577 (via snapping), drones or noises!
578
579 To begin, select a bunch of drones and
580 choose Drone Tools > Chuck
581 DIN creates a geometric chuck with these drones
582 Minimum 2 drones
583 Good start = 3 drones
584 Each drone rotates about the other
585 1st drone is central, rotates about nothing, so stays still
586 You can move this drone around and move the whole chuck
587 The 2nd drone rotates about the 1st,
588 The 3rd drone rotates about the 2nd,
589 and so on
590
591 Browse the selected drones of the chuck with Drone Tools > Browse drone
592 or press <- and -> to select a drone in the chuck and
593
594 Adjust the speed at which this drone rotates about the other
595 (Drone Params > Chuck > Speed), the distance at which it rotates
596 (Drone Params > Chuck > Length), flip the direction of rotation
597 (anti-clockwise < > clockwise) (Drone Params > Flip), pause/go
598 (Drone Params > Chuck > Toggle) the rotation and draw a trail
599 (Drone Params > Chuck > Trail length). Recommend trail on the last
600 drone of a chuck to make drawing like the real geometric chuck
601
602 Set Angle per turn to speed up (large angle) or slow down (small angle) the rotation
603 of all the drones of (all) chuck(s).
604
605 The drones of the chuck sound the pitch/volume they are on the microtonal keyboard.
606 You can mute/unmute any / all of the drones of the chuck.
607 Drone Tools > Mute, Drone Tools > Unmute
608 You can convert any / all of the chuck's drones to noise (Drone Tools > Drone > Noise) or
609 vice-versa.
610 Drone Tools > Drone 2 Noise, Drone Tools > Noise 2 Drone
611 You can snap drones of the chuck to sound notes
612 Drone Params > Motion > Snap drones to notes > Set
613
614 *\
615
616 + stop drone decay (and death) if frozen
617 + retime decay time of deleted drone(s) if you select drone(s) and delete again
618
619 * change FM depth (like AM depth) by moving along vertical on mouse slider
620 * moved along horizontal until DIN 49.1
621 * change FM bpm (like AM bpm) by moving along vertical on mouse slider
622 * moved along horizontal until DIN 49.1
623 * helps with moving drones along circular paths at different speeds
624 * improved value spinner UI
625 * improved find_nearest_note (..) performance
626 * improved drone trail performance
627 * improved console text & value display
628
629 DIN Is Noise 49.1:
630
631 ! fixed : crash from 'delays' editor when menu toggled and plugin browser fold toggled !
632 /* multiple channel MIDI support
633
634 DIN Is Noise 49:
635
636 /* position (instead of modulation until DIN48) affects velocity vector of drones
637
638 /* Set center for rotation and scaling of drones:
639
640 Menu > Drone Tools > Auto Center uses average center of selected drones
641 Choose Menu > Drone Tools > Set to mouse and Click on it to set center to
642 point under mouse cursor. Click to stop.
643 You can also click and just move the magenta cross that marks the center
644
645 on mouse slider:
646
647 /* warp mouse position when rolling wheel
648 /* press / to toggle warp mouse at boundary
649
650 * improved the drone selector / drone mesh/pendulum preview on microtonal keyboard
651
652 * show hz/vol for selected drones only (instead of all drones until DIN48)
653
654 ! fixed: flip (using ` key shortcut) between instruments loads the correct editors !
655
656 EXPERIMENTAL:
657
658 /* when scaling or rotating drones, change scale or angle increments using mouse slider (see
659 DIN 48 CHANGELOG below for how to do this) to change scaling +/ rotation 'speed'
660
661
662 DIN Is Noise 48:
663
664 /* create drone pendulum based on number of drones instead of spacing
665
666 /* convert selected pitched drones to noising drones and vice-versa.
667 + CTRL + . to convert selected pitched drones to noising drones
668 or Menu >> Drone Tools >> Drone > Noise
669 + CTRL + , to convert selected noising drones to pitched drones
670 or Menu >> Drone Tools >> Noise > Drone
671
672 /* mute and unmute selected drones
673 + SHIFT + , to mute selected drones or Menu > Drone tools > Mute
674 + SHIFT + . to unmute selected drones or Menu > Drone tools > Unmute
675
676 /* Zero and Reset gravity from Gravity widget
677
678 /* Zero velocity of drones
679
680 /* Start and End angles for geometry > sound plugins on curve editor
681 + ie., Circler, Rose_Milker and Lissajous
682 + you can now turn a part - an arc - of rose and lissajous curves into waveforms/envelopes/modulators!
683 + Phase for Spiraler
684 + End angle found from Turns
685
686 /* Start, End points in Countries plugin on curve editors
687
688 + turn 'arc' of a 'country polygon' into waveform/envelope/modulator
689
690 /* set Phase of each harmonic in Sine_Mixer
691
692 + press g to toggle between harmonics and phase 'levels'
693 + Phase levels is blue
694 + goes from 0 deg (bottom) to 360 deg (top)
695
696 /* press f to toggle paint harmonics (or phase) in Sine_Mixer
697
698 /* overlay last screen (instrument or editor) on curve editor
699
700 /* !EXPERIMENTAL! mouse slider increment scaling
701
702 When using mouse slider:
703
704 press , to set increment to 1/N of original increment
705 press . to set increment to Nx of original increment
706 press 1,2,3...9 sets N = 1,2,3...9
707 press 0 to set N = 10
708 default N = 10
709
710 /* if selected drones exist, set initial menu tab to Drone Params on microtonal keyboard
711
712 * ` to flip to last screen
713 * flip between editors
714 * flip between instruments
715
716 * improved curve editor
717 * curve samples display, curve component picker, cursor display
718
719 * improved auto splitting 'box that has a ball' in Mondrian
720 * results in better trapping of ball(s) in box(es) :)
721
722 ! fixed dont warp mouse when mouse slider activation aborted !
723 ! fixed add/remove gravity widget on menu toggle !
724 ! fixed load/save of launched drones !
725 ! fixed reset velocity & gravity !
726 ! fixed crash when clearing all harmonic bookmarks and moving sine mixer !
727 ! fixed name of radius curve in spiraler plugin !
728 ! fixed drones per minute as float instead of int !
729 ! removed release location from the title bar as COVID-19 has grounded me in Chennai, India :( !
730
731 DIN Is Noise 47.1 @ Chennai, India
732 * improved Spinner UI control
733 ! removed 2 sets of log messages that may affect performance !
734 DIN Is Noise 47 @ Chennai, India
735 + Menu > Drone Params now split into 3 tabs:
736 + Modulation:
737 + has controls to edit drone modulation parameters like AM/FM depth, BPM
738 + Visual:
739 + has controls to edit drone trail length, handle size,
740 connection stiffness (see below), colors (see below) etc
741 + Motion:
742 + controls to edit drone parameters like velocity, acceleration,
743 drones per minute, lifetime etc
744
745 + On the mouse slider
746 + when you can slide both horizontally and vertically:
747 + press SHIFT to slide just vertically
748 + press CTRL to slide just horizontally
749
750 /* connect and disconnect drones
751 + Workflow:
752 + select a bunch of drones (eg., Menu > Drone Tools > Select all drones)
753 + Menu > Drone Tools > Connect
754 + DIN connects drones in selection order
755 + points one drone to next
756 + last drone points in the direction second last drone points
757
758 + To select drones in desired order, select drones one at a time by
759 click+moving a box around a drone and use SHIFT / CTRL keys while
760 selecting to add to existing selection or remove a drone from selection
761
762 + Steps @ 1 connects drones successively, this is default
763 Steps @ 2 connects alternate drones
764 Steps @ 1 2 does both
765 try other steps sequences:
766 eg., 1 3 5 OR 1 2 4 etc
767 !note! separate steps with SPACE not comma
768
769 + Just select a drone and move (Menu > Drone Tools > Move) and all the
770 connected drones move to keep their original distance on connection.
771
772 'But then one lizard (or iguana) moved, and all moved'
773 - VS Naipaul, Among the Believers
774
775 + Use Connection Stiffness parameter to control the 'elasticity' of
776 the connections (Menu > Drone Params > Visual)
777 + This is a global parameter, affects all connections among all drones
778 + Menu > Drone Tools > Disconnect to disconnect the connected drones
779 + Select a drone in the middle of a chain and disconnect splits the chain in two
780 + Select the 'head' drones of two different chains and connect to merge the two
781 chains into one
782
783 /* new curve & curve editor to sculpt amplitude (aka depth) & bpm of
784 drone pendulum's drones
785 + access using Menu > Editors > Drone Pendulum
786 + edit curves even after creating drone pendulums!
787 + affects drone pendulums selected drones belong to
788 + use Menu > Overlay Instrument on the editor to see the effects of the
789 edits while making them.
790
791 /* new color sliders to set the color of selected drones
792 + 2 sets of 3 sliders (1 for Red, Green and Blue).
793 + Top set called Top
794 + Bottom set called Bottom
795 + Select some drones and
796 + change color to Top to set color of all selected drones to the RGB of Top sliders
797 + change color to Bottom to set color of all selected drones to RGB of Bottom sliders
798 + change color to Blend to set color of all selected drones to RGB blended from Top to Bottom sliders
799 + first selected drone color is from the Top sliders
800 + last selected drone is from the Bottom sliders
801 + other drones take inbetween colors
802
803 + To select drones in desired order, select drones one at a time by click+moving a box
804 around a drone and use SHIFT / CTRL keys while selecting to add or remove drone to an
805 existing selection
806
807 + change color to Random to set random colors on all selected drones
808 + not truly random but a random color between RGB of Top and Bottom sliders
809 + useful as colors are random but still from a certain part of the spectrum
810
811 + If drones are noise, their color is grayscale, derived from just the Red channel of Top
812 and/or/both Bottom sliders, based on the chosen scheme.
813 + If you edit a color slider, DIN hides the menu so you can see the edits better, hit ESC or click on Close
814 to finish/abort
815
816 /* abort octave shift
817 + useful to take the key note away from 'piano notes' into 'weird' pitches yet still have 'scales' based on
818 this new key 'note'.
819 + without Abort this was still possible by editing the octave shift curve
820 (Menu > Editors > Octave Shift)
821 + to set the key back to a note, goto Settings screen and use the Key spinner
822 + click Menu > Misc > Abort on Microtonal-Keyboard, Mondrian and Binaural Drones instruments
823 + or press SHIFT + ESC
824 + click Abort button on Keyboard-Keyboard
825 + or press n
826
827 /* edit arrow width, depth for each drone
828 + until DIN46, this was global
829 + very useful for snake/centepede like visualisations of connected drones
830
831 * scale drones
832 * press CTRL to scale along horizontal
833 * press SHIFT to scale along vertical
834
835 + moved Scale, Rotate drones to join Move in Menu > Drone Tools
836 + SHIFT + e to scale selected drones
837 + CTRL + e to rotate selected drones
838
839 + press ` to flip between current instrument and last used curve editor
840
841 + detach Spinners from Menu when using the < and > buttons to decrease/increase values
842
843 * Optimised GUI controls
844 * field, spinner etc
845
846 \0/ fixed crash when browsing waveforms on keyboard-keyboard
847 \0/ fixed search field in countries
848 \0/ fixed value field in number for bits of char
849
850 DIN Is Noise 46.2 @ Chennai, India
851 * optimised GUI controls a bit
852 * improved mirroring curve about horizontal, vertical axes
853 + new horizontal, vertical local axes
854 + new seed curves in fractaliser plugin
855 ! fixed bug in identifying and setting audio devices !
856 ! introduced in DIN 46 :( !
857 DIN Is Noise 46, 46.1 @ Chennai, India
858 !+! what is fixed when modulating microtonal range?:
859 + left, right or center
860 !+! voice is voice or noise on microtonal keyboard
861 + voice intones the pitch under mouse cursor
862 + volume of voice is mouse's height above the bottom of the microtonal keyboard
863 + noise makes noise with frequency content related to pitch under cursor
864 + volume of noise is mouse's height above the bottom of the microtonal keyboard
865 !+! presets for superformula geometry > waveform/envelope/modulation curve plugin
866 + Click on Browse on Superformula page on a curve editor
867 + Mouse wheel or move up and down to browse the shapes
868 + Apply or Auto Apply
869 + toggle draw mesh outline
870 + improved scale/rotate drones
871 + improved selection of point modulators
872 + improved selection of sine mixer bookmarks
873 ! fixed modulate checkbutton set when Menu > Ranges > Toggle !
874 ! fixed window resize throws off mouse cursor on microtonal keyboard !
875 /!/ zooming curve editor when mouse captures are paused does not update visual !
876
877 DIN Is Noise 45 @ Chennai, India
878 ! fixed internal bug in noise generator !
879 + results in improved noise :)
880 + keys can trigger notes or noise on keyboard-keyboard
881 + ie keys from computer keyboard or MIDI keyboard
882 + press ENTER to toggle
883 - removed black/white notes display from MIDI keyboard input
884 + colored notes displayed instead
885 + balls can trigger notes or noise in Mondrian
886 + Select balls
887 + and Menu > Balls Triggers Note <> Ball Triggers Noise
888 + or press ENTER
889 + if there is no selection, all balls will trigger note (default)or noise
890
891 DIN Is Noise 44 @ Chennai, India
892
893 !+! new noise generator in DIN Is Noise!
894 + using drone UI
895 + choose if a drone drones a pitch or makes noise
896 + Menu > Drone Tools > Drone is Drone OR Drone is Noise
897 + OR SHIFT + q
898 + when a drone makes noise:
899 + a low frequency 'drone' makes low frequency noise
900 + a high frequency 'drone' makes high frequency noise
901 + manipulate drones ie move, modulate, launch, orbit to
902 manipulate noises!
903 + choose Menu > Editors > Noise Interpolator to
904 + edit the noise sample interpolator curve
905
906 + use drone pendulum's parameters to turn rows and/or columns
907 of a drone mesh into drone pendulums! :)
908 + works best when you make all drones of the mesh at the same time
909 + so set In seconds to 0
910 + and make drones in:
911 + ascending or descending rows
912 + ascending or descending columns
913 + apply to AM BPM and/or FM BPM to turn rows and/or columns of drone
914 mesh as drone pendulums!
915
916 + flip button to flip start/end bpm of drones in drone pendulum
917
918 + harmonic bookmarks on Sine Mixer
919 + click on + to bookmark selected harmonics
920 + click on - to delete selected bookmarks
921 + click on x to delete all bookmarks
922 + click bookmark to select harmonics linked to it
923 + SHIFT click to select more bookmarks
924
925 + DIN switches menu to:
926 + Drone Params when drones selected
927 + Voice when Voice is enabled
928 + Ranges when a range is selected
929
930 + new microtonal keyboard shortcuts:
931 + SHIFT + f selects range under cursor
932 + CTRL + f to switch between change note to note and change note by octave
933 + CTRL + v to change both notes (to another note or by octave) of current range
934 + CTRL + g to change left note (to another note or by octave) of current range
935 + CTRL + h to change right note (to another note or by octave) of current range
936 + SHIFT + b to change height of current range
937 + CTRL + b to change height of entire microtonal keyboard
938
939 + rearranged menu items on Drone Params
940 + brought drone AM depth and FM depth together
941 + brought drone AM BPM and FM BPM together
942 + moved Rotate and Scale drones to Drone Params tab from Drone Tools tab
943
944 + new ~ checkbutton on all spinners to toggle random increment
945 + click > on spinner to edit random increment
946 + in field after ~ label
947 + default is -100% to 100% of steady increment ie value in +- field
948
949 + press ESC to abort active octave shift on current instrument
950
951 + press g to toggle draw cursor guide on curve editors
952 + useful for aligning curve components
953 + activate with keyboard shortcut only, may appear on menu in future
954
955 * improved turn and speed ball operator on Mondrian
956 + using new noise / random algorithm!
957
958 * improved bezier curve generation
959
960 * improved expression evaluation in numeric fields
961
962 * improved warper default curves
963
964 * improved waveforms library
965
966 ! fixed bug: DIN may crash when deleting a vertex of curve that has point modulation !
967 ! fixed bug: make absolute values of a binaural pair available for editing
968 when selection changed from multiple pairs to one pair. !
969 ! fixed bug: num pad + and - to change slit size on Mondrian !
970 ! fixed bug: non decaying notes when ball volume < 0 on Mondrian !
971 ! fixed bug: in display of Selected Range number on Microtonal Keyboard!
972 ! fixed bug: reposition drones when left note of first range, right note of last range changed !
973 ! fixed bug: in 2600 patch !
974 ! fixed typo: paris instead of pairs in binaural drones instrument !
975
976 DIN Is Noise 43 @ Chennai, India
977 + move groups of harmonics on sine mixer
978 + shift + click harmonic on sine mixer to select / deselect
979 + moving one of the selected harmonics moves all the selected harmonics
980 'But then one lizard (or iguana) moved, and all moved'
981 - VS Naipaul, Among the Believers
982 + but shift when moving moves just the selected harmonic
983 + all, none, invert buttons for gross selection
984 + resize phrase position slider
985 + DIN saves/reloads slider
986 + change both notes of selected range using mouse slider
987 + Use Menu > Ranges > Change note? > Both
988 - removed Change Left note, Change Right note menu items in Menu > Ranges
989 + replaced with Change note? Left Right Both menu items
990 + scrub / scratch point modulations
991 + click on Scrub and move up or down
992 + Sync on Point Modulator
993 + workflow is
994 + select modulations
995 + pause
996 + sync
997 + play
998 + voice volume minimum can be < 0 [voice waveform flips]
999 + spinner to set absolute drone master volume
1000 + drone master volume can be < 0 [drone waveform flips]
1001 - removed mute drones button
1002 * just spin drone master volume to 0
1003 + save/load auto apply state on sine mixer
1004 + save/load drone selection state
1005 + save/load drone frozen state
1006 + save/load plugins fold state for each curve editor
1007 + save/load auto select launched drones flag
1008 + turn on/off UI in all screens, not just in instruments
1009 * optimised
1010 + click repeat of Apply button and key repeat of shortcut r for continous apply
1011 of plugin output to curve
1012 + useful/interesting when point modulating custom sin/cos/radius curves etc
1013 + drones per minute is floating point instead of integer
1014 * improved phrase handling for voice on microtonal keyboard
1015 * improved plugin browser on curve editors
1016 * changed default drone handle size to 3
1017 ! fixed bug: turning on/off ui on point modulator may crash DIN42 !
1018 ! fixed bug: pressing shift/ctrl effected selection box when not previewing mesh !
1019 ! fixed bug: changing parameters on Number plugin didnt update preview !
1020 ! fixed bug: frozen drones saved to disk thawed on reload !
1021 ! fixed bug: didnt save/load turns on spiraler !
1022 ! fixed bug: rotate/scale of drones happened in UI loop, now moved to audio loop !
1023 ! fixed bug: stopped gravity editing when menu displayed !
1024
1025 DIN Is Noise 42 @ Chennai, India
1026 Dedicated to Dad, Mr Narasimhan Sampath [06-10-1943 >> 16-04-2019]
1027 +++ Point Modulator on all curve editors, new for DIN42 +++
1028 + modulate any point on any bezier curve along horizontal (ie X) and
1029 vertical (ie Y) axis over BPM
1030 + eg., when done on a waveform, leads to timbral modulation, look @ the FFT :)
1031 + try on shapeforms too!
1032 + try on decays, delay feedback and volumes, pitch and range modulation
1033 curves etc etc!
1034 + to modulate, click on the + button on the Point Modulator panel
1035 + now pick a point on curve (any vertex or tangent) to modulate
1036 + DIN draws a dotted line joining a state button to the point on curve
1037 + nothing is modulating yet
1038 + change X depth to modulate the point along horizontal axis over BPM
1039 + the point should start moving along the horizontal
1040 + change Y depth to modulate the point along vertical axis over BPM
1041 + change X BPM and Y BPM to change the rate ie speed of modulation of the point
1042 + when more than one point is modulating,
1043 + click on None to deselect all modulating points
1044 + click on a point's state button to change modulation params for just that point.
1045 + use the X depth/BPM, Y depth/BPM spinners to change the params
1046 + use All, None and Invert to select more than one state button and thus more than
1047 one point.
1048 + use the X depth/BPM, Y depth/BPM spinners to change params for selected points
1049 + press play button to toggle point modulation of selected points
1050 + press kill button to kill point modulations of selected points
1051 + point modulations are saved [and loaded] to [from] disk :)
1052
1053 +++ Captures - mouse capture panel on all curve editors, new for DIN42 +++
1054 + play, pause and kill captures
1055 + To record a mouse capture, position mouse on the curve item
1056 that you want to assign the mouse capture, choose Menu > Mouse capture > Start,
1057 move mouse as you please and click or ESC to finish.
1058 + To assign the mouse capture, choose Menu > Mouse capture > Assign and pick
1059 the curve item to assign the mouse capture. You can assign the same mouse
1060 capture to other items by repeating the same.
1061 + mouse capture is *not* saved to disk [maybe in a future release]
1062
1063 + Overlay pitch and volume distrubution on microtonal-keyboard:
1064 + Menu > Misc > Overlay pitch distribution
1065 + Menu > Misc > Overlay volume distribution
1066 + Pixels Per Level
1067 + more pixels, less acurate rendering of distribution but faster
1068 + less pixels, more accurate rendering of distribution but slower
1069 + Default is 5 pixels
1070 + Mirror whole curve or curve vertex/tangent about Horizontal and Vertical axis
1071 + Swap 2 curves [experimental, only works on editors with 2 curves]
1072 - removed Close button from Menu
1073
1074 DIN Is Noise 41 @ Chennai, India
1075 +++ non-linear pitch and volume distributon on all microtonal-keybard ranges +++
1076 ! until DIN 40, pitch increased steadily from left note to right note on all
1077 microtonal ranges !
1078 ! until DIN 40, volume increased steadily from the bottom to the top on all
1079 microtonal ranges !
1080 + in DIN 41, edit the pitch distribution curve to non-linearly change the pitch
1081 when going left to right in a microtonal range.
1082 + Menu > Editors > Range Pitch & Volume
1083 + in DIN 41, edit the volume distribution curve to non-linearly change the volume
1084 when going from bottom to top of a microtonal range.
1085 + Menu > Editors > Range Pitch & Volume
1086 + Voice and Drones all pick up changes to range width+height, range pitch+volume curves
1087 + Press INSERT on microtonal-keyboard to toggle overlay of volume distribution
1088 + Press END on microtonal-keyboard to toggle overlay of pitch distribution
1089
1090 +++ drone pendulum +++
1091 + inspired by wave pendulum toy/experiment from physics
1092 + Menu > Drone Tools > Create drone pendulum
1093 + click and drag a box to create drone pendulum
1094 + spacing determines the number of drones made along orientation
1095 + low spacing = large number of drones
1096 high spacing = small number of drones
1097 + orientation
1098 + vertical
1099 + frequency changes more than volume
1100 + change FM depth, bpm for interest
1101 + horizontal
1102 + volume changes more than frequency
1103 + change AM depth, bpm for interest
1104
1105 + press SHIFT or CTRL to square the selection box
1106 + SHIFT chooses lesser of width or height
1107 + CTRL chooses greater of width or height to square mesh
1108 + squaring useful when creating mesh and drone pendulums
1109
1110 + ESC or Right click from Settings screen to come back to previuos screen
1111
1112 - removed F8 = mouse capture assign and F9 = mouse capture delete
1113 - Please use Menu > Tools > Mouse capture > Assign or Delete
1114
1115 ! FIXED: curve picker display !
1116 ! FIXED: menu items on curve editor !
1117
1118 DIN Is Noise 40 @ Chennai, India.
1119 + Wrap checkbutton on Sine Mixer to toggle wrapping of harmonics when sliding them
1120 - always wrapped harmonics until DIN 39
1121
1122 + defered creation of drones of the drone mesh
1123 - all drones were created at the same time until DIN 39
1124 + affects their phase so affects their visual modulation
1125 + visible and audible when you do FM / AM
1126 + different creation schemes:
1127 + ascending/descending rows and columns, random, nearest/farthest from various
1128 end points, random and custom point
1129
1130 + set width and height of all microtonal ranges by sculpting curves range-width
1131 and range-height in the new Range Width & Height editor
1132 + invoke editor with Menu > Editors > Range Width & Height
1133 + useful to overlay the microtonal keyboard when on the editor
1134 + press o or Menu > Tools > Overlay Instrument
1135 + sculpting the curves is another way to do mircotonal range modulation :)
1136 ! automate by assigning mouse capture to points !
1137
1138 + randomize increment on a value spinner:
1139 + click on right arrow beside the value field to reveal ~ checkbutton
1140 + turn increment randomization on/off by clicking on the ~ checkbutton
1141 + default randomisation of increment is -100% to 100% ie no
1142 increment at all to twice the increment
1143 + change this value in the field to change the randomisation
1144 eg., 0 100 means increment to twice the increment
1145
1146 + direction indicators on mouse slider
1147 + move along indicated directions to change parameter
1148
1149 + new checkbox Overlay Instrument on all curve editors
1150 + overlays the current instrument on the curve editor
1151
1152 * changed widgets on the keyboard-keyboard:
1153 * voices attack time, decay time
1154
1155 * can now constrain drone scaling (Menu > Drone Tools > Scale) to horizontal or vertical axis.
1156 * default is uniform scaling along both horizontal and vertical axes
1157 * press SHIFT to scale selected drones along horizontal only
1158 * press CTRL to scale selected drones along vertical only
1159
1160 ! FIXED set drone master volume increment to 0.1 !
1161 ! FIXED countries plugin preview !
1162 ! FIXED drone mesh preview display !
1163 ! FIXED fold arrow button color on oscilloscope !
1164 ! FIXED no pitch/volume display when cursor on widgets on microtonal keyboard !
1165
1166 DIN Is Noise 39 @ Chennai, India.
1167 + change left or right note of the current microtonal range
1168 + change to another note of the scale or any note in tuning
1169 + using Menu > Ranges > Change left note
1170 + using Menu > Ranges > Change right note
1171 + use range picker to pick the microtonal range
1172 + browse selected drones to pick one
1173 + DIN hilites picked drone with green cross hairs
1174 + press LEFT ARROW to pick previous drone
1175 + press RIGHT ARROW to pick next drone
1176 + when you reach the end, DIN picks all drones in the original selection.
1177 + can keep browsing if you like
1178 + you can apply any drone operation to this picked drone
1179 eg., launch/stop launch drones from this drone and so on.
1180 + aliter Menu > Drone Tools > Browse Drone
1181 + snap selected drones to notes
1182 ! DIN snapped all drones to notes until version 38a !
1183 + allows for some drones to snap to notes and others to roam free
1184 + select a bunch of drones and
1185 + k to toggle snap drones to notes
1186 + SHIFT + k to snap drones to notes
1187 + CTRL + k to unsnap drones from notes
1188 + aliter Menu > Drone Params > Snap drones to notes
1189 + Set, Unset and Toggle
1190 + use Snap Left and Snap Right to determine how drone snaps to left or
1191 right note of the microtonal range:
1192 + eg., if Snap Left = 0.25 and Snap Right = 0.75 drone snaps to left note
1193 if the drone is in first 25% of microtonal range's width, snaps to the right
1194 note if its beyond 75% of the microtonal range's width.
1195 + eg., if Snap Left = 0.5 and Snap Right = 0.5 too, drone snaps to left note
1196 for the first 50% of the microtonal range's width and then snaps to the right
1197 note for the remaining 50% of the microtonal range's width ie the drone always
1198 snaps to a note.
1199 + modulation now affects velocity vector of selected drones
1200 + select a bunch of drones and
1201 + v to toggle
1202 + SHIFT + v to let modulation affect velocity vector of selected drones
1203 + CTRL + v to not let modulation affect velocity vector of selected drones
1204 + aliter Menu > Drone Params > Modulation Affects Velocity
1205 + Set, Unset and Toggle
1206 + added Curve Mix Samples to specify Curve Mix Time in samples
1207 + allows for very small curve mix times
1208 + changing this value changes Curve Mix Time and vice-versa.
1209 + also changes when sample rate changes
1210 + turns is now floating point (was integer) in spiraler
1211 + allows for both partial and complete turns eg., 1, 1.25, 1.5, 1.75, 2 turns.
1212 + press l to toggle label vertices on any curve editor
1213 + RPM increment is 1.0 on curve editor
1214 * default Curve Mix Time is now 1 seconds
1215 * improved Mirror style of snap drones to notes
1216 * improved drone pitch / volume tagging
1217 ! OPTIMISED plugins circler, rose milker, spiraler, sine mixer, lissajous !
1218 ! FIXED select attractors from any selection of drones !
1219 ! FIXED Record and Clear Phrase in Menu > Voice !
1220 ! FIXED labeling of notes on Mondrian when tuning changes !
1221 ! FIXED Drone Master Volume display !
1222 ! FIXED Gravity tracks snapped x of drone instead of absolute x of drone !
1223 ! FIXED default modulation width for all ranges is 0 !
1224
1225 DIN Is Noise 38a @ Chennai, India:
1226 ! fixed pitch/volume of suitable drones when range left, right or
1227 height is changed
1228
1229 DIN Is Noise 38 @ Chennai, India
1230 * plugins window on curve editors folded on DIN start.
1231 + snap drones to notes styles:
1232 + free - any value on snap left, right
1233 + lock - snap left equals snap right
1234 + mirror -
1235 + if snap left = i, then snap right = 1 - i
1236 eg., snap left = 0.25, snap right = 0.75
1237 + cosmetics: edit drone arrow depth and width.
1238 + full microtonal range modulation on microtonal-keyboard
1239 + modulate width and height of a microtonal range over BPM.
1240 + start/stop/pause-resume/toggle of modulation
1241 + affects voice and drones
1242 + because the pitch/volume the voice and drones point to modulates
1243 + edit height of every microtonal range
1244 + or edit height of all ranges
1245 + set curve mixing time to audio buffer time on Settings screen.
1246 + shift + i on mondrian toggles label pitch/volume of notes
1247
1248 DIN Is Noise 37a @ Chennai, India on September 21, 2018:
1249 on microtonal-keyboard:
1250 + SHIFT + l to select all drone launchers
1251 + SHIFT + j to show/hide pitch volume info of drones
1252 -> moved some menu items from Drone Tools to Drone Params
1253 -> moved some menu items from Drone Params to Drone Tools
1254 + modulation affects velocity vector checkbox
1255 + 2 styles of bounce for drones reaching the bottom of the microtonal keyboard:
1256 + forward - like a bouncing ball
1257 + back - inspired by alpha particles - Search Rutherford Scattering on Wikipedia.
1258 + save/restore of snap to notes
1259 + reset selected drones' velocity vector to vertical
1260 + reset gravity vector
1261 + to pointing down
1262 + optionally keep last size
1263 ! fixed adjust range left / right / both to respect limits !
1264 ! fixed divide by 0 bug on bouncing drones !
1265 + taller levels on Sine Mixer plugin for finer control of harmonics levels
1266 * moved FFT display to lower corner of waveform editors
1267 * improved the bezier curve solvers
1268 + DIN uptime listed in log
1269
1270 DIN Is Noise 36 @ Chennai, India
1271 + Sync button on settings screen sets same L and R delay times
1272 + settings screen now on curve editors too
1273 + mouse wheel on value field of a spinner increments / decrements value
1274 + velocity heading faces direction of modulation when drone isnt tracking, orbiting
1275 + adjust board height, range left, right & both using mouse slider from Menu > Misc
1276 or moving under gravity
1277 + << or >> to shift harmonics on sine mixer. results in apply
1278 + change height of sine mixer by moving the little button to the right of all harmonics
1279 + allows for finer change of harmonic level
1280 + adjust amount that snaps drone to the left or right note of microtonal range
1281 + default snap to left is 0.5
1282 + ie drone snaps to left note if its at <= 0.5 of the range
1283 + default snap right is 0.5
1284 + ie drone snaps to right note if its at >= 0.5 of the range
1285 ! fixed +- position on spinner ui control
1286 ! fixed voice, delay, gater buttons response when clicked during fade in/out
1287 ! fixed drone response when deleted but is actually fading in
1288 * rearranged menu items: am depth/bpm and fm depth/bpm on Voice and Drone Params,
1289 velocity/rotate-velocity/acceleration on Drone Tools
1290
1291 DIN Is Noise 35 @ Chennai, India
1292 + Major expansion to Binaural drones instrument
1293 + See new docs at https://dinisnoise.org/docs/ for details
1294 + binaural drones now saved with their phase at exit to reproduce sound on restart.
1295 ! fixed crash when ball deleted and auto split box wants to split box that had deleted ball
1296 ! fixed memory leak when a binaural drone pair was removed
1297 * mark if L or R channel is stronger on oscilloscope with a @
1298
1299 DIN Is Noise 34 @ Chennai, India
1300 + Pick a box that has a ball to:
1301 + Auto split box,
1302 + can be used to trap a bouncing ball
1303 + Auto delete box
1304 * Slit operations
1305 NEW! F11 to Remove slits on a box that has a ball
1306 NEW! F12 to Remove all slits
1307 + Label pitch and volume on:
1308 + Mondrian
1309 + Microtonal-Keyboard:
1310 * click on i to label pitch/volume on the board and cursor
1311 + click on j to label pitch/volume of the drones
1312 + Change Drone Rise (attack) and fall (decay) times:
1313 + When drone is made or launched:
1314 + A rise ie attack time is randomly chosen between Drone Min Rise Time
1315 and Drone Max Rise time.
1316 + When a drone is deleted or killed:
1317 + A fall time is randomly chosen between Drone Min Fall Time
1318 and Drone Max Fall time.
1319 + Change times on the Settings screen
1320 ! fixed ie disabled moving the oscilloscope when menu is showing
1321
1322 DIN Is Noise 33 @ Chennai, India
1323
1324 + 5th ball operation :)
1325 + Transform
1326 + transforms a ball into an another type of ball or a random type
1327 + so a bouncer can become
1328 + a healer
1329 + a wrecker or
1330 + a random type ie remain a bouncer, become a healer or a wrecker
1331 + a wrecker can become
1332 + a healer
1333 + a bouncer or
1334 + a random type ie remain a wrecker, become a healer or a bouncer
1335 + and a healer can be come
1336 + a wrecker
1337 + a bouncer or
1338 + a random type ie remain a healer, become a wrecker or a bouncer
1339 + the transform rules are global ie same for all balls
1340 + does it Every few seconds
1341 + Mouse wheel to scroll menu items
1342
1343 DIN Is Noise 32 @ Palazzolo Acreide, Italy
1344
1345 + 4 new ball operations in the Mondrian instrument
1346
1347 + Apply per ball
1348 + eg., different balls, different operations
1349
1350 + Turn
1351 + randomly turns a ball clockwise or anti-clockwise by some degrees
1352 + does it Every few seconds
1353 + Clockwise is max degrees the ball will turn clockwise
1354 + Anti-clockwise is max degrees the ball will turn anti-clockwise
1355 + Sync keeps Clockwise and Anti-clockwise same for turning equally likely in both directions
1356
1357 + Speed
1358 + randomly speeds up or slows down a ball
1359 + does it Every few seconds
1360 + Brake = how much to slow down each time
1361 + Accelerate = how much to speed up each time
1362 + Sync keeps Brake and Accelerate same for equally likely speed changes
1363
1364 + Teleport
1365 + randomly moves the position of a ball by some distance
1366 + does it Every few seconds
1367 + upto a Maximum distance
1368
1369 + Clone
1370 + clones the selected ball
1371 + Offsets it away from the parent
1372 + Every few seconds
1373 + upto Max Clones
1374 + when turned on, Clone can clone too
1375 + careful, because clone's clone will clone too
1376 + and its clone will clone too
1377 + and on
1378 + and on
1379 + and on!
1380 + Max balls keeps cloning under control
1381 + Or select all balls, wait for the new clones to appear and delete selection.
1382 + this leaves just the new clones
1383 + but labor intensive :)
1384
1385 ! Use Turn and Speed together to make insect / worm like crawling movements :)
1386 + "Go to the ant, thou sluggard; consider her ways, and be wise.."
1387 + Proverbs 6:6-8, The Bible.
1388
1389 ! Fixed bug on auto-split box which created full boxes instead of splitting the box when no notes are available to split on.
1390
1391 + Turn On / Off drawing of ball Position, Heading and Trails
1392
1393 + Theming of GUI possible by editing globals file
1394 + on Windows its factory/globals
1395 + on GNU/Linux its usually /usr/local/share/din/factory/globals
1396 + on Apple Mac OS X its Applications/DIN Is Noise.app/Contents/Mac OS X/factory/globals
1397
1398 + PREFIX variable on GNU/Linux allows correct installation on directories other than /usr/local
1399
1400 ! DIN Is Noise 31 @ Chennai, India
1401
1402 ! RELEASE WITHDRAWN, USE DIN Is Noise 32 !
1403
1404 + 3 new ball operations
1405
1406 + Apply per ball
1407 + eg., different operations on different balls
1408
1409 + Turn
1410 + randomly turns a ball clockwise or anti-clockwise by some degrees
1411 + does it Every few seconds
1412 + Clockwise is max degrees the ball will turn clockwise
1413 + Anti-clockwise is max degrees the ball will turn anti-clockwise
1414 + Sync to keep Clockwise and Anti-clockwise same to turn equally likely in both directions
1415
1416 + Speed
1417 + randomly speeds up or slows down a ball
1418 + does it Every few seconds
1419 + Brake + how much to slow down each time
1420 + Accelerate + how much to speed up each time
1421 + Sync to keep Brake and Accelerate same for equally likely speed changes
1422
1423 ! Use Turn and Speed together to make ant / worm like crawling movements :)
1424 + "Go to the ant, thou sluggard; consider her ways, and be wise.."
1425 - Proverbs 6:6-8, The Bible.
1426
1427 + Teleport
1428 + randomly moves the position of a ball by some distance
1429 + does it Every few seconds
1430 + upto a Maximum distance
1431
1432 + Turn On / Off drawing of ball Position, Heading and Trails
1433
1434 + Theming of GUI possible by editing globals file
1435 + on Windows its factory/globals
1436 + on GNU/Linux its /usr/local/share/din/factory/globals
1437 + on Apple Mac OS X its Applications/DIN Is Noise.app/Contents/Mac OS X/factory/globals
1438
1439 - DIN Is Noise 30
1440 + auto split boxes in mondrian
1441 + auto delete boxes in mondrian
1442 + can do both at the same time
1443 + browse selected balls using arrow keys
1444
1445 * optimised note and N x N grid creation on Mondrian
1446 * one box per frame
1447 * optimised delete all boxes
1448 * one box delete per frame
1449
1450 + warper plugin maps bounding box of input curve to target
1451 + instead of mapping on XY space to another
1452 + works better for classical as well as shapeforms
1453
1454 * 9, 0 to decrease/increase points of note polygon
1455 * SHIFT + 9, 0 to decrease/increase radius of note polygon
1456
1457 + sine/cosine editor has plugin support
1458
1459 * reorganised countries
1460 * reorganised waveforms library
1461
1462 + can make install on GNU/Linux
1463
1464 - DIN Is Noise 29 is Free Software
1465 - under GPL 2.0 for GNU/Linux
1466 - released in Chennai, India on September 8, 2017
1467
1468 * Please dont use this code to build binaries for Windows or Mac OS X *
1469 * I sell licenses for those binaries to barely support myself *
1470 * Please consider funding my independent work on DIN Is Noise > http://dinisnoise.org/fundin/ *
1471
1472 - !fixed crash! when moving whole curve on the curve editor
1473 - introduced in DIN28. not in earlier versions.
1474 - !new! mouse slider
1475 - activate by just clicking on a spinner's name.
1476 - most spinners everywhere qualify:
1477 - menu, plugins
1478 - even settings screen
1479 - try changing the key note while making sounds on your chosen instrument :)
1480 - works well on Microtonal Keyboard & Mondrian
1481 - note: some spinners are disabled, nothing happens when you click them.
1482 - change the value of the spinner by simply moving the mouse along the mapped axis: X or Y [can be both too, see below]
1483 - you can attach multiple spinners to the mouse slider and change the value of multiple parameters at the same time!
1484 - just shift+click to add a spinner to the mouse slider
1485 - shift+clicking doesnt activate the mouse slider yet.
1486 - the attached spinner turns green
1487 - detach the already attached spinner by shift+clicking on it again.
1488 - the detached spinner reverts to red
1489 - to launch the slider just click ie dont press shift on the last spinner
1490 - with multiple spinners on the mouse slider, movement along both X and Y can change the values of appropriately mapped spinners.
1491 - to stop the mouse slider just click or press ESC.
1492 - changing the axis assigned to a spinner is not possible in this release
1493 - things to try:
1494 - make a group of drones
1495 - select
1496 - FM and AM depth spinners or
1497 - FM and AM BPM spinners
1498 - or all of them at the same time :)
1499 - FM mapped to X
1500 - AM mapped to Y
1501 - move along X, Y to do visual drone FM, AM!
1502 - select these drones and launch drones from them: Menu > Drone tools >Launch
1503 - select Change velocity and Rotate velocity spinners
1504 - move along X to rotate velocity
1505 - move along Y to increase/decrease velocity
1506 - loud crazy action :)
1507 - play with drone life times:
1508 - Menu > Drone tools > Select launchers
1509 - Menu > Drone parameters > Change lifetime
1510 - move in X!
1511
1512 August 1, 2017:
1513
1514 ! Released DIN Is Noise 28 as Free Software !
1515
1516 + freeze / thaw moving drones
1517
1518 - j to freeze/thaw selected moving drones
1519 - or Menu > Drone Tools > Freeze, Menu > Drone Tools > Thaw
1520 - tip: try on visually modulating drones, combine with k ie snap drones to notes :)
1521 - shift + h to toggle auto-select launched drones
1522 - for easy freeze/thaw of launched drones
1523 - tip: select the launchers first (Menu > Drone Tools > Select launchers) and then shift + h.
1524 - possible from menu too.
1525
1526 + animated slits in Mondrian
1527 - select slits
1528 - g to toggle selection target between balls and slits
1529 - or from menu, change Selection Target
1530 - other selection short cuts same as short cuts for ball selection
1531 - l - to select all slits
1532 - k - to select slits of box
1533 - i - to invert selected slits
1534 - n - to clear selection
1535 - when no slits are selected and an operation requires a slit [say, toggle animation or change slit open/close time], DIN selects slit under cursor.
1536 - all possible from menu
1537 - animate slits
1538 - h to toggle animation
1539 - INSERT / DELETE keys to decrease/increase slit open/close time
1540 - all possible from menu too.
1541
1542 * keyboard shortcut changes to microtonal-keyboard
1543 - l, i targets drones on microtonal-keyboard just like l, i targets balls or slits in Mondrian.
1544 - l to select all drones
1545 - l was orbit selected drones
1546 - now its F4
1547 - i to invert selected drones
1548 - i was pitch/volume info display
1549 - now its shift + i
1550 - or click i on bottom of microtonal-keyboard
1551 - j to toggle freeze/thaw selected moving drones
1552 - or Menu > Drone Tools > Freeze, Menu > Drone Tools > Thaw
1553 - k to snap drones to notes
1554 - was Show Anchors, now from Menu > Drone Parameters only
1555
1556 * just click + move mouse not drag to edit vertex/tangent in curve editors
1557
1558 * just click + move mouse not drag on all sliders and sine mixer levels
1559
1560 * fixed ball color due to Mondrian > Menu > Clear Modulations
1561
1562 * click + move mouse not drag to move blue triangle to set sustain on keyboard-keyboard attack
1563
1564 * rearranged microtonal-keyboard menu
1565 - new Voice menu
1566 - new Drone_Tools menu
1567 - new Drone_Parameters menu
1568 - new select launchers command on menu to select drone launchers
1569
1570 + vanity command uptime to print the amount of time that DIN has been running
1571 - eg., 1 hour 29 minutes 58 seconds
1572
1573 + new patch called harmonics to animate harmonics of sine mixer
1574 - load-patch harmonics
1575 - set harmonics {0 1 2 3} ;# first 4 harmonics will be animated
1576 - set harmonics [get-nums 0 19] ;# all harmonics
1577 - set harmonics [get-nums 1 19 2] ;# odd harmonics
1578 - set harmonics [get-nums 0 19 2] ;# even harmonics
1579 - set duration 0.1 ;# 1/10th of second
1580 - set amount 0.01 ;# amount to animate each chosen harmonic every duration
1581 - set anim 1 ;# 1 - start anim, 0 - stop anim
1582 - MIDI sliders 1-20 assigned to 20 harmonics
1583
1584 + set-var location { @ Place, Country}
1585 - eg., set-var location { @ Chennai, India}
1586 - eg., set-var location { @ Medellin, Colombia}
1587
1588 ------------------------------------------------------------------------------
1589
1590 March 24, 2017:
1591 + Released DIN Is Noise 27 as Free Software
1592 + Release notes: https://workflowy.com/s/JbPNTNeifj
1593 December 25, 2016:
1594 + Released DIN Is Noise 26 as Free Software.
1595 + Full list of changes coming soon.
1596 September 13, 2016:
1597 + Released DIN Is Noise 25 as Free Software
1598 + See release notes for DIN Is Noise:
1599 https://workflowy.com/s/JbPNTNeifj
1600 November 22, 2015:
1601 + Released DIN Is Noise 10 as Free Software
1602 ....
1603 ....
1604 ....
1605 May 16, 2013:
1606 + 'i'm still evaluating.'
1607 + correct update of show pitch/volume on microtonal-keyboard checkbox
1608 + L delay duration field to change left channel delay duration
1609 + R delay duration field to change right channel delay duration
1610 April 6, 2013:
1611 + added a button to fold/unfold the console
1612 - removed keyboard shortcuts for changing attack_time, decay_time
1613 ! parameters are always visible on the keyboard-keyboard
1614
1615 March 6, 2013:
1616 !!! wip din-5.0 !!!
1617 FIX order of init of variables
1618 FIX decay_start_volume init on keyboard-keyboard
1619 NEW authors_note as eval notice
1620 FIX remove inital mesgs to console from din.cc
1621
1622 October 1, 2012:
1623 !!! din-4.3 !!!
1624 !!! factory reset required for upgrade from *any* version:
1625 see http://dinisnoise.org/faq/#factory !!!
1626
1627 NEW filled_button - a button that is filled with some color (part of
1628 GUI library) - used on parameter sliders (see below)
1629 NEW created parameters dialog for keyboard-keyboard. visually edit
1630 attack time, decay time, pitch bend & note volume!
1631
1632 to operate slider, left-click on the slider and mouse-move to
1633 change value
1634 NEW right-click on parameters titlebar and mouse-move to move the dialog.
1635 right-click again to drop!
1636 NEW min/max dialog for editing parameter limits.
1637 click on the filled button at the left of a parameter slider to
1638 show/hide min/max dialog
1639 NEW set-var commands for din variables attack_time, decay_time,
1640 pitch_bend and note_volume also updates the GUI.
1641 eg., set-var attack_time 0.15 ;# updates attack_time slider
1642 set-var decay_time 5 ;# updates decay_time slider
1643 set-var pitch_bend 50 ;# updates the pitch_bend slider
1644 NEW on exit, din waits until all launched keyboard-keyboard notes have faded out
1645 NEW tweaked parameters of keyboard-keyboard and gave better defaults.
1646 BUG resize screen and parameters dialog may disappear; workaround:
1647 resize to last good size.
1648 FIX click or ALT+F4 on window close button doesnt quit din. must quit
1649 thru ESC, ESC again.
1650
1651 September 25, 2012:
1652 !!! din-4.2.1
1653 !!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
1654 FIX phrasor continues playing on microtonal-keyboard when instrument is keyboard-keyboard
1655 September 21, 2012:
1656 !!! din-4.2
1657 !!! factory reset required for upgrade from *any* version:
1658 see http://dinisnoise.org/faq/#factory !!!
1659 NEW voice, gater & delay fade in/out at start, during operation & at exit.
1660 NEW auto-fold the console during verbose parameter change (FM/AM depth/bpm etc)
1661 *** tweaked the compressor & delay feedback/volume curves for better defaults
1662 September 18, 2012:
1663 !!! din 4.1 !!!
1664 !!! factory reset required for upgrade from *any* version:
1665 see http://dinisnoise.org/faq/#factory !!!
1666 NEW Compressor checkbox on microtonal-keyboard & keyboard-keyboard
1667 NEW show names of donors to the DIN is Noise project on the ticker
1668
1669 September 2, 2012:
1670 !!! wip: 4.1 !!!
1671 FIX font definition with y > 0 for correct positioning of ui elements like buttons, checkboxes etc.
1672 FIX pushed the ticker down to the bottom
1673 FIX start resolution is 800 x 600 instead of 640 x 480. done in 4.0, forgot to note in CHANGELOG
1674 August 31, 2012:
1675 !!! din-4.0 !!!
1676 NEW Donate button and a ticker message - sorry folks, lost my patronage and my situation is dire :(
1677 FIX click and release on button triggers click on the button instead of just click
1678 August 30, 2012:
1679 !!! wip: din-4.0 !!!
1680 NEW drones fade in and out on din load/exit!
1681 NEW drones fade in on creation!
1682 NEW drones fade out on delete!
1683 NEW visually move the sustain on attack editor on keyboard-keyboard
1684 NEW sustain saved with attack curve library
1685 FIX proper onion skin toggling on all editors
1686 August 8, 2012:
1687 !!! wip: din-4.0 !!!
1688 FIX notes that were bent stay bent when new note is launched
1689 NEW save/reload mouse position on keyboard-keyboard for better mouse based pitch bending
1690 NEW save/reload of number of trail points & handle size of all drones
1691 May 14, 2012:
1692 !!! wip: din-3.6 |||
1693 FIX data files stored in /usr/local/share/din instead of /usr/local/var/din
1694 NEW change the trail size of each drone (+ and -), selected drones or all drones
1695 NEW change size of a drone (9 & 0), selected drones or all drones
1696 May 08, 2012:
1697 !!! din-3.5 !!!
1698 +++ save/load variable delta_bpm
1699 *** INTERNAL: moved SAMPLE_DURATION calculation to audio_out::set_sample_rate
1700 *** INTERNAL: revised console.h/.cc
1701 *** INTERNAL/FIX?: moved console text color constants to main.cc
1702 FIX MIDI connnected to MIDI connected in audio.cc - thanks Ian Morrison
1703 NEW drone trails! press + and - on microtonal-keyboard to increase & decrease trail length
1704 NEW drone handle size - press 9, 0 on microtonal-keyboard
1705 NEW press o on curve editor to overlay din microtonal-keyboard or keyboard-keyboard on the curve editor
1706 useful for editing drone modulation curves and watching the drone modulation shapes change
1707 FIX memory leak on keyboard-keyboard when fully decayed notes are removed
1708 NEW mouse driven pitch bend on keyboard-keyboard! move mouse either side
1709 of dotted vertical line to pitch bend. pitch bend applies to
1710 all notes. to zero pitch bend bring mouse back to the dotted
1711 line. change pitch bend amount from command mode:
1712 set-var pitch_bend 100 ;# upto 100 hz
1713 sv pb 100 ;# short form
1714
1715 mouse driven pitch bend overrides MIDI driven pitch bend. use one or the other :)
1716
1717 NEW variable trail_length for drone trail lengths:
1718 set-var trail_length 10 ;# trail has 10 points
1719 sv tl 10 ;# short form
1720
1721 can also be set from the ui as listed above
1722 NEW din.desktop and din.png files to help packagers (look in ~/.din/data)
1723
1724 April 17, 2012:
1725 !!!! din-3.0 !!!!
1726 !!!! factory reset required for upgrade from *any* version: see
1727 http://dinisnoise.org/faq/#factory !!!!
1728 +++ visual drone modulation +++
1729 +++ j - toggle modulation target: voice or drones
1730 +++ y, u - decrease/increase FM depth of selected drones or all drones
1731 or the lead voice when there are no drones.
1732 +++ r, t - decrease/increase AM depth of selected drones or all drones
1733 or the lead voice when there are no drones.
1734 +++ F7, F8 - decrease/increase FM bpm of selected drones or all drones
1735 or the lead voice when there are no drones.
1736 +++ F9, F10 - decrease/increase FM bpm of selected drones or all drones
1737 or the lead voice when there are no drones.
1738 +++ press 3 on microtonal-keyboard to edit the drone modulation curves
1739 pink for AM
1740 cyan for FM
1741 +++ automagically save and load modulation on drones
1742 +++ k - toggle drone anchor drawing
1743 +++ smoother increase / decrease of drone master volume
1744
1745 March 4, 2012:
1746 !!!! din-2.0 !!!!
1747 !!!! factory reset required for upgrade from *any* version: see
1748 http://dinisnoise.org/faq/#factory !!!!
1749 +++: quantise bezier curve pattern generated by morse-code
1750 command to n beats:
1751
1752 morse-code sos ;# quantise to 1 beat (default)
1753 morse-code sos 2.5 ;# quantise to 2 and half beats
1754 mc sos 3 ;# short form; quantise to 3 beats
1755
1756 ;# the bezier curve pattern is on copy curve
1757 ;# just paste (LCTRL + v) on any curve in any curve editor
1758 +++: detect when a MIDI device connects or disconnects with din
1759 +++: press keys on the MIDI keyboard and launch notes. support from
1760 C-1 (MIDI note on # = 0) to G9 (MIDI note on # = 127).
1761 +++: support for retuning intervals, velocity curves and pitch
1762 bending.
1763 fix: fixed decay failure when note volume at start of decay is -ve
1764
1765 February 11, 2012:
1766 !!!! din-1.9.5 !!!!
1767 !!!! factory reset required for upgrade from *any* version: see
1768 http://dinisnoise.org/faq/#factory !!!!
1769 fix: shoot of volume when sustain is larger than x value of last vertex on attack
1770 curve!
1771 +++: add new variable auto_connect_outputs to control if din will
1772 auto connect its output to system audio outputs. yes by default.
1773
1774 set-var auto_connect_outputs 1 ;# auto connects next time din starts
1775 sv aco 0 ;# short form; disables auto connect
1776 ***: reworked (yet again) the result handling of Tcl interpreter
1777
1778 January 15, 2012:
1779 !!!! din-1.9.4 !!!!
1780 ***: changed curve-value command to retain existing x or y values of a vertex or tangent position.
1781 ***: rewrote the result handling of Tcl interpreter
1782 December 22, 2011:
1783 !!!! din-1.9.3 !!!!
1784 !!!! factory reset required for upgrade from *any* version: see
1785 http://dinisnoise.org/faq/#factory !!!!
1786 +++: new changer patch to automagically change the key of din every
1787 n seconds
1788 fix: fixed Bus Error / Segmentation fault due to bad result clearing
1789 in the Tcl interpreter.
1790 December 08, 2011
1791 !!!! din-1.9.2 !!!!
1792 !!!! factory reset required for upgrade from *any* version: see
1793 http://dinisnoise.org/faq/#factory !!!!
1794 fix: size of boxes in keyboard-keyboard is constant irrespective of
1795 note volume
1796 +++: added new variable delta_time
1797 set-var delta_time 0.1 ;# 1/10 sec delta
1798 delta_time is used for changing attack and decay time thru their
1799 keyboard short cuts ie attack time & decay time change in
1800 delta_time steps.
1801
1802 November 27, 2011:
1803 !!!! din-1.9.1 !!!!
1804 !!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!!
1805 fix: version number on title bar matches version number of din.
1806 fix: immediately insert vertex when there is only one curve in a curve editor
1807 fix: immediately draw scratch curve when there is only one curve in a curve editor
1808 fix: doesnt enter command mode when ALT + TAB is pressed
1809 ***: changed name of din board to microtonal-keyboard
1810 +++: new keyboard short cuts for attack time & decay time on keyboard-keyboard
1811 +++: f11, f12 to change octave shift bpm on microtonal keyboard & keyboard-keyboard
1812 +++: SPACE to toggle delay on keyboard-keyboard
1813 ***: changed waveform of keyboard-keyboard from sine to the waveform on microtonal-keyboard.
1814 ***: LALT -> SPACE on sine composer to avoid clash with ALT + TAB
1815 November 16, 2011:
1816 !!!! din-1.9 !!!!
1817 !!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!!
1818 fix: disabled exit Tcl command that quits & crashes din
1819 fix: disabled application of sine harmonic composer output to non waveforms (ie gater patterns, fm/am patterns etc)
1820 +++: added 33 new Bezier curve waveforms to the waveforms library
1821 +++: added display of Fast Fourier Transform (FFT) of Bezier curve waveforms
1822 +++: added display of samples for 2 cycles of a waveform at a particular pitch
1823 ***: labelled the octave shift patterns & added a new octave shift pattern (snap-4th)
1824 ***: can now toggle sine harmonic composer, fft and samples display (see curve_editor.hlp) on waveform editors
1825 November 6, 2011:
1826 !!!! din-1.8.6 !!!!
1827 !!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!!
1828 fix: saved & restored note-volume
1829 +++: separate waveform (ie oscillator) for voice on din board & voices on keyboard-keyboard
1830 +++: added new waveforms to library. beziered pulse (with different duty cycles) & saw waveforms
1831 +++: added attack & decay patterns library
1832 +++: midi clock sync & midi start messages syncs bpm components
1833 ***: optimised solver (see solver.cc)
1834 October 29, 2011:
1835 !!! din-1.8.5.0 !!!
1836 !!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
1837 +++ keyboard-keyboard
1838 press a key to play a note
1839 keys of the computer keyboard mapped to notes of the scale over a
1840 range of 3 octaves
1841 *** reassigned curve editors for keyboard-keyboard
1842 !fix! bezier curve solver returns upper y when slope is infinity (returned lower y prior)
1843 October 5, 2011:
1844 !!! din-1.8 !!!
1845 !!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
1846 *** optimised visible range calculation when scrolling on din board
1847 +++ added shrutis.tuning -- divides the octave into 22 intervals
1848 based on the Indian classical music tradition.
1849 tuning set shruti ;# load shruti tuning
1850 +++ color coded text messages to the terminal.
1851 --- removed unlimited resonators due to complexity in editing & management;
1852 now there is only 1 oscillator ie waveform to voice the lead sound.
1853 --- removed channels response due to complexity in editing & management
1854 volume of waveform is determined by height of the mouse in playing area -
1855 @bottom volume is 0; @top volume is wave_volume (see variable wave_volume below)
1856 +++ added variable wave_volume to set waveform volume ie oscillator volume:
1857 set-var wave_volume 0 ;# mutes voice (also by pressing SPACE on din board)
1858 set-var wave_volume 1 ;# max volume - will be *very* loud
1859 set-var wave_volume 0.125 ;# default volume
1860 set-var wave_volume 2.8 ;# crazy volume accepted (ie not clipped)
1861 set-var wave_volume -1 ;# negative volume accepted but will invert waveform
1862 --- removed strength & channel editors due to removal of resonators & channels response concepts.
1863 *** changed curve editor assignments due to removal of above editors
1864 press F1 on din board to see new assignments
1865 --- removed stereo gaters due to complexity in editing & management.
1866 now there is just 1 gater (called gr) applied to L & R
1867 *** the lead voice is now mono
1868 *** the drones have always been mono
1869 *** the delays remain stereo
1870 September 8, 2011:
1871 !!! din-1.7.3 !!!
1872 !fix! segfault due to undefined order of initialisation of global variables on some versions of g++.
1873 August 23, 2011:
1874 !!! din-1.7.2 !!!
1875 *** revamped start-end patch to support multiple MIDI #CC assignments
1876 *** in command mode, type help start-end or read the file ~/.din/start-end.help.tcl for complete information.
1877 August 19, 2011:
1878 !!! din-1.7.1 !!!
1879 !!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
1880 +++ parameter limit labelling on all curve editors
1881 +++ beat/value marker with realtime update on all beat/value editors (gater, modulation & octave_shift)
1882 *** improved default octave shift pattern
1883 !fix! recompute visible ranges after resizing a range
1884 August 17, 20011:
1885 !!! din-1.7 !!!
1886 !!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
1887 *** din audio output range is 0.1 Hz to infinity Hz.
1888 +++ num-octaves command
1889 num-octaves 4 ;# span current scale to 4 octaves
1890 num-octaves 28 ;# span current scale to 28 octaves
1891 preserves existing drones & range size mods
1892 +++ current octave labelling
1893 +++ cursor info mod (absolute volume printed at all times instead of 0 under playing area and 1 above playing area)
1894 +++ key note colored green on all octaves
1895 +++ save/reload drone phases
1896
1897 July 26, 2011:
1898 !!! din-1.6.6 !!!
1899 !!! factory reset required if upgrading: see http://dinisnoise.org/faq/#factory !!!
1900 !fix! more accurate selection of drones (inbox selection instead of radial selection)
1901 +++ new variable delta_bpm (or dbpm); gater bpm changes by delta_bpm for each f9/f10
1902 eg., set-var delta_bpm 5 ;# increases/decreases bpm by 5 beats for gaters, am, fm & octave shift modules
1903 +++ new variable drone_handle_size (or dhs)
1904 eg., set-var drone_handle_size 14 ;# default is 7; doubles the size of the drone handles
1905 *** f9/f10 - decreases/increases both gaters bpm at the same time.
1906 *** lshift + f9/f10 - decreases/increases left gater bpm ie gl
1907 *** lctrl + f9/f10 - decreases/increases right gater bpm ie gl
1908 *** improved handling of gater bpm change and fm/am depth change
1909 July 20, 2011:
1910 !!! din-1.6.5 !!!
1911 !!! factory reset required if upgrading: see http://dinisnoise.org/faq/#factory !!!
1912 !fix! segmentation fault when opening window on ATI/Intel graphics cards
1913 *** sine -> waveform key shortcut changed to left_alt instead of right_control
1914 July 3, 2011:
1915 !!! din-1.6.4 !!!
1916 --- removed dependency on SDL
1917 +++ optimised mouse, keyboard & OpenGL handling using Xlib. din is now an X11 application.
1918 *** restored drone master volume to default instead of 0 ie quiet
1919 June 11, 2011:
1920 !!! din-1.6.3 !!!
1921 !!! factory reset required if upgrading: see http://dinisnoise.org/faq/#factory !!!
1922 *** optimised mouse capture
1923 --- removed FFT on waveform; no dependency on FFTWF library anymore
1924 *** faster startup (no FFT wisdom calculation) & performance (no FFT calculation waveform edit/change)
1925 !fix! clear drones when scale changes
1926 May 28, 2011:
1927 !!! din-1.6.2 !!!
1928 !!! factory reset required if upgrading !!!
1929 *** silence drones when drones loaded to avoid shock volume change.
1930 *** fixed volume variable to go from 0 to 1 instead of 0 to 0.99xxx
1931 *** added interval check (clamps to 1 to 2) in tone ranges
1932 +++ 2600.patch.tcl : google insight banned words -> morse code -> music.
1933 --- removed superfluous feedback/volume setting from delay.cc/h code
1934 !fix! drones not resizing/repositioning when range size changed with LCTRL + mouse move
1935 *** reordered keyboard handling in din::handle_input (..)
1936 May 16, 2011:
1937 !!! din-1.6.1 !!!
1938 !!! factory reset required !!!
1939 +++ new volume variable accesible in Tcl interpreter; goes from 0 to 1
1940 *** changed start-end.patch.tcl to allow use of mouse or midi slider to go from start/end and apply command
1941 +++ added drone_master_volume to possibilities for going start->end
1942 +++ cursor info display shows frequency & volume
1943 +++ show_frequency variable change to show_cursor_info
1944 +++ din irc bot video
1945 May 9, 2011:
1946 !!! din-1.6 !!!
1947 +++ new patch start-end to go from a start to end value and execute a command for each inbetween value
1948 +++ see start-end.patch.tcl & start-end.help.tcl for more information
1949 May 1, 2011:
1950 !!! din-1.5.9 !!!
1951 --- gaters command. gaters state stored in din_info
1952 *** oscilloscope colors saved on exit
1953 *** renamed short name of some commands
1954 April 17, 2011:
1955 !!! din-1.5.8.0 !!!
1956 +++ get-beat <list of components> [all|first|last]
1957 +++ get-beat fm all returns current beat, first beat and last beat of fm
1958 +++ get-beat am first returns first beat of am
1959 *** frequency display switches correctly between phrasor cursor & mouse cursor
1960 *** lop alias load-patch, lp alias list-patches & asd alias assign-drones in droner
1961 +++ [ & ] keys for decreasing, increasing phrasor jog
1962 +++ i to toggle display of frequencies on notes & under mouse cursor
1963
1964 April 6, 2011:
1965
1966 !!! din-1.5.7 !!!
1967 +++ timenow variable contains time elapsed in seconds from din start
1968 +++ loop procedure to run user defined Tcl code at every din loop
1969 proc loop {} {
1970 ;# this runs every din loop
1971 echo $timenow ;# just print number of seconds elapsed since din start on console
1972 }
1973 +++ list-patches command to list patches
1974 +++ load-patch command to load a patch
1975 +++ picth intervals as vars eg., $1, $2b, $3b, $3, $4, $5b, $5, $6b $6, $7b, $7 & $8
1976 +++ piano notes as vars eg., $C, $Db $D, $Eb, $E, $F, $Gb, $G, $Ab $A, $Bb $B. $C is 261.626, $A is 440
1977 *** doesnt select sine composer and/or fft levels on curve editor when curve edit is in progress
1978 +++ documentation for most of din commands
1979
1980 April 1, 2011:
1981 !!! din-1.5.6 !!!
1982 *** completely optimised for JACK instead of compatibility with both OSS and JACK.
1983 *** see revision 2201 at http://code.google.com/p/din/source/detail?r=2201 for more information.
1984 March 29, 2011:
1985 !!! din-1.5.5 !!!
1986 *** octave shift is faster (we shift once every audio out like before but we dont find shifts per sample) and more accurate (no floating point drift)
1987 *** the beat of fm, am, gaters always progresses (am_vol/am_depth/fm_depth & mouse height determines their use in sound)
1988 *** changed octave_shift curve name from octave_shift to os for easier handling on the command line
1989 +++ added 2 patterns to octave shift library
1990 !fix! fixed bug in solver::operator (float x) --> (see din-1.5.5/src/solver.cc)
1991
1992 March 28, 2011:
1993 !!! din-1.5.4 !!!
1994 +++ added variable jog for phrasor jogging
1995 +++ set-var jog 3 ;# default jog
1996 +++ set-var jog 30 ;# warp speed jog!
1997 +++ sv j 30 ;# short form
1998 +++ get-var jog ;# returns jog value
1999 +++ gv j ;# short form
2000 +++ left_alt + enter resets taptarget bpms ie equivalent to command set-now $taptarget 0 --> used to match beat of external sounds
2001 +++ added configure.ac check for tcl.h in addition to tcl8.5/tcl.h
2002 *** optimised beat2value.cc/h that drives the gaters, fm, am & os
2003 *** bot is insecure to allow full remote operation of din.
2004 *** bot will connect to password protected irc channels only.
2005 !!! use it among friends. not enemies !!!
2006 *** bot always connects at your command (see din-1.5.4/src/bot.cc & din-1.5.4/include/bot.h)
2007
2008 March 25, 2011:
2009 !!! din-1.5.3 !!!
2010 *** factory reset required, see http://dinisnoise.org/faq/
2011 !fix! fixed compressor response when input audio sample hits xmax boundary - stays at max instead of going to min
2012 !fix! get-drone command and ~/.din/droner.tcl
2013 +++ display name of jack connection on din title bar
2014 +++ new variable show_frequency to toggle frequency display under mouse and frequencies of notes of the scale
2015 +++ set-var show_frequency 1 ;# displays frequency under mouse & frequency of all notes in all the octaves
2016 +++ set-var show_frequency 0 ;# hides frequency under mouse & frequency of all notes in all the octaves
2017 +++ set-var sf 1 ;# sf is short for show_frequency
2018 +++ sv sf 0 ;# sv is short for set-var; sf is short for show_frequency
2019 +++ din saves show_frequency state when it quits and restores it when you start din again
2020 *** tweaked ~/.din/scoper.tcl to allow easy entry of midi slider/knob values
2021 *** documented ~/.din/2600.tcl
2022 --- oss midi support & other unused procs in ~/.din/init.tcl
2023
2024 March 20, 2011:
2025 !!! din-1.5.2 !!!
2026 *** factory reset required, see http://dinisnoise.org/faq/
2027 +++ can specify number of samples used to construct the profile curve in sine harmonic composer (was 100 samples).
2028 +++ set-var num_sine_samples OR nss, get-var num_sine_samples ORR nss
2029 +++ ' and \ keys in waveform editor to decrease/increase num_sine_samples 1 at a time
2030 *** use large number of samples to accurately profile a curve that has large number of harmonics
2031 *** experiment with num_sine_samples to change timbre
2032 +++ save/load vertex labelling on curve editors
2033 March 14, 2011:
2034 !!! din-1.5.1 !!!
2035 *** factory reset required, see http://dinisnoise.org/faq/
2036 +++ constant size vertex/tangent handles in all editors
2037 +++ initial handle size specified in ~/.din/globals
2038 +++ vertex labelling in all editors
2039 +++ press l in an editor (but *not* on a curve vertex/tangent cos thats for making curve linear) to toggle
2040 +++ scales can have an unlimited number (previously 16) of notes, hence an unlimited number of ranges (previously 64)
2041 !!! din remains a 3 octave instrument !!!
2042 *** set-bpm <list of components> <list of bpms>, get-bpm <list of components>
2043 +++ set-now <list of components> <list of nows>, get-now <list of components>
2044 +++ get-drone selected, set-drone <list of drones> <list of volumes>
2045 *** droner.tcl to support microtonal chord progressions via MIDI
2046 --- removed mouse interpolation
2047 --- reinstated original subdivision for curve generation as new subdivision scheme
2048 introed in din-1.5 doesnt work for octave shift (will revisit)
2049 +++ delete-disabled-resonators command updated to allow all resonators to be deleted
2050 *** optimised resonator picking and disable/enable/enable all
2051 --- removed curve_editor::randomise (..) and rnd_miny_maxy --> unused feature
2052 !bug! deleteing all resonators when mouse capture is applied crashes din (segmentation fault)
2053 !bug! unpredictable curve loss when moving curve in strength editor (segmentation fault on quit)
2054 February 15, 2011:
2055 !!!! din-1.5 release !!!!
2056 !fix! mirroring tangents caused 1st subdivided point to lie on the curve so no further subdivision hence no profile.
2057 !fix! midi ring buffer deallocation in audio::alloc
2058 +++ mouse x, y interpolation for click/tick/glitch free sound on long periods
2059 +++ midi-pitch-bend, midi-program-change support (thanks Peter Nelson - http://fuzzle.org/~petern/)
2060 +++ experimental get-selection command to get selected items from current curve editor
2061 +++ can create, edit and remove drones while phrasor is playing a phrase
2062 +++ tonex, toney for finding tone on din board
2063 *** midi_cc -> midi-cc, midi_note_on -> midi-note-on, midi_note_off -> midi-note-off, midi_clock -> midi-clock, midi_start -> midi-start
2064 *** changed scoper.tcl, midimap.tcl, 2600.tcl
2065 --- removed curve_editor::scale ()
2066 +++ <cstdlib> to bot.cc
2067 +++ add sample_rate change callback.
2068 +++ add buffer_size change callback altho we dont support buffer size change in din. would require a restart.
2069 *** optimised malloc in JACK MIDI.
2070 February 9, 2011
2071 !!!! release: din-1.4.3 !!!!
2072 !!!! factory reset required. see http://dinisnoise.org/faq/ for more information.
2073 !++! fps, usleep vars to bring down CPU usage (thanks Peter Nelson - http://fuzzle.org/~petern/)
2074 !++! full JACK MIDI support (thanks Peter Nelson - http://fuzzle.org/~petern/)
2075 !--! jettisoned RtMidi support -> tagged in svn for din-OSS use.
2076 !--! no requirement of alsa sound library hence din is fully cross-platform. porters rejoice!
2077 +++ <space> to mute/unmute resonators @ din board.
2078 +++ marked the low (1-, 2b-, 2-, 3b-, 3- etc) & high octave (1+, 2b+, 2+, 3b+, 3+ etc) on din tone board
2079 +++ changed set-bpm command to accept multiple bpm targets and values
2080 +++ changed get-bpm command to print bpms of multiple bpm targets
2081 +++ changed set-var command to accept multiple vars and values
2082 +++ changed get-var to print values of multiple vars
2083 +++ undo-redo on curve editors does undo-redo of window position too
2084 +++ save-restore exact din board position, oscilloscope position
2085 +++ better default view of din board showing key note when launched for 1st time
2086 +++ new vars zoom & pan added to control zoom and pan variables in curve_editor
2087 +++ scroll, zoom & pan now loaded from settings.tcl instead of din_info
2088 *** midimap.tcl sourced in init.tcl for default midi_cc, midi_note_on/off, midi_clock & midi_start
2089 *** tweak of handle sizes in curve editors for easier editing for new user
2090 !fix! load-resonators doesnt fail when resonators file doesnt exist
2091 !fix! default resonator strength is simple linear curve instead of bezier curve for easier initial editing.
2092 !fix! tangents dont mirror by default in drone editor
2093 January 27, 2011:
2094 ++ add resonator with <left shift> + r in strength editor.
2095 -- removed resonator::MAX_RESONATORS - add as many resonators as you like
2096 ++ delete-disabled-resonators Tcl command
2097 ++ new hires clock
2098 ** mark curve segments in curve_editor
2099 ** list_resonators -> ls-resonators command name change
2100 ** editor name change: morse_code -> morse-code
2101 !fix! add drone clears selected drones
2102 !fix! oscilloscope not selected when selecting drones
2103 !fix! configure.ac now checks for OpenGL, Tcl, libircclient & libasound2
2104 January 21, 2011:
2105 !! release: 1.4.1 !!
2106 ++ ultra drone editing - multiple drone creation, moving around the board and delete
2107 ++ infinite volumes - change height of the keyboard to get as many volume levels as you like.
2108 ++ integrated jack/oss into same code base
2109 January 14, 2011:
2110 * infinite volumes - change the height of the infinite keyboard to get as many volume levels as you like
2111 January 13, 2011:
2112 * integrating jack/oss api in same code base
2113 January 10, 2011:
2114 * din-1.4 : first release into the wild
2115 * fast multi bezier curve (ie multi_curve) solver with infinite points and bezier curves
2116 * WIP: new website design @ dinisnoise.org
2117 December 30, 2010:
2118 * bot uses safe interpreter when connected to irc channel
2119 December 29, 2010:
2120 * esc 2 times from din board to quit din -- waits for ESC_WAIT (1.25 seconds between ESC presses).
2121 * fixed oscillator_strength marker display, default globals tuning file spec and default din_info
2122 December 28, 2010:
2123 * set_bpm --> set-bpm and other commands names changed. no underscore, use hypen instead to separate command words in a command name - easy to type.
2124 + added equivalent help files
2125 December 27, 2010:
2126 * fixed key repeat speed bug when MIDI is on
2127 * tweaked the jag font
2128 * WIP: infinite curve points, infinite resonators ---> not adequately tested; @alejo: dont package
2129 December 16, 2010:
2130 * help.tcl, set_text_color to set console text color, faster command lookup from command list
2131 December 15, 2010:
2132 * help for commands is via help.tcl script -- we will use this script to also produce command reference documentation
2133 at dinisnoise.org soon.
2134 December 11, 2010:
2135 * bot:
2136 * disabled exec command from Tcl interpreter when bot connects to irc. exec enabled again when bot disconnects.
2137 * new disconnect subcommand with custom disconnect message. eg., bot disconnect message
2138 * key: command changed to print nearest note name (eg., key note) & value (eg., key value).
2139 * scale: new scale command. list, get, set, add, remove & find are subcommands. eg., scale set major
2140 * tuning: new tuning command. list, set & get are subcommands. eg., tuning set et
2141 * bpm: new bpm command. list, set, get, reset, style (set & get subcommands) are subcommands. eg., bpm set fm 240
2142 * delay: new delay command. set, get are subcommands. list coming soon. delay set {l r} 5000 ;# sets delay time of both channel to 5 seconds.
2143 * taptarget variable to control what component (gl gr fm am or os) gets affected when tap bpm is used. eg., set taptarget {gl gr}
2144 * console: stays in command mode when TAB pressed until ESC or TAB is pressed again. used to leave command mode when ENTER was pressed.
2145 * BUGFIX: delay haywire fix when delay time is 1 second ie 1000 msecs.
2146
2147 November 30, 2010:
2148 * bot input/output is queued and processed in input loop
2149 * |BUG| fix multi line output of commands to IRC. no lines sent.
2150 November 24, 2010:
2151 * tonic limited to 40 to max_frequency possible in given sample rate
2152 * display key and completion of octave shift --> since octave shift is general we call it modulating up/down instead of octave up/down.
2153 October 11, 2010:
2154 @oss:
2155 !!!after 4 years figure out that ive been calculating everything in the audio thread. so no matter how fast a processor we have, calculations cant be performed faster than
2156 the rate at which the audio thread is called. fixed this at least now. this opens the way for the power of multi-core processors & GPUs.!!!
2157 ***tcl interp back in main thread***
2158 ---removed command scheduling in console as tcl interp is back in main thread ---
2159 ***viewport struct changed, creates default or restores last viewport on constructor ***
2160 ***audio_out::write changed to accept audio buffer to read for writing from main thread ***
2161 ++++++
2162 concept of a bunch of audio buffers in main thread that is filled continously one after another.
2163 give a written buffer when audio thread wants one. important to keep a good number of audio buffers but not too many
2164 so that main thread is not writing the same buffer the audio thread wants to read. if all buffers are written
2165 but none read so far, main thread will stop writing anymore and wait for audio thread to read some.
2166 ++++
2167 ***better commenting and messages on shell console***
2168 September 29, 2010:
2169 @@@ sort of back in the groove again.
2170 @@@ wip though as trying to have 1 Tcl interpreter in audio thread for accessing samples later
2171 [!!!] FIXED resizing window
2172 [!!!] FIXED abrupt level change when moving from editors back to board
2173 [+++] can continue to play with the mouse when in command mode. tracks cursor in editors.
2174 September 12, 2010:
2175 +++ get_scope/set_scope, get_drone/set_drone and scoper.tcl, droner.tcl
2176 August 05, 2010:
2177 [***/+++]: midi command fleshed out with list, open, close options.
2178 [+++]: midiopenall, midicloseall tcl cmds available for one-shot open/close of midi input devices
2179 [+++]: midimapper.tcl - displays midi output on console. to invoke issue command: scr midimapper
2180 August 03, 2010:
2181 [mod] param value messages on the console
2182 [bug] segfault on load_scale of bhoopali - couldnt recreate!
2183 July 31, 2010:
2184 *** back to working on font again
2185 ***changed set_font_size to change cell size, char spacing & headroom
2186 ***get_font_size simply prints 4 numbers
2187 ***created help files of set_font_size & get_font_size
2188 ***changed save_settings.tcl to include font size params so we dont save them in the font file itself. this is good.
2189 July 30, 2010:
2190 !+++! tap bpm, set taptarget {gl gr fm am os}. change taptarget to change whose bpm is affected.
2191 eg, set taptarget {fm am os} only sets fm, am & octave shift bpm to tapbpm.
2192 July 28, 2010:
2193 *** worked on timing of keypress (keypressedd(..) in input.h)
2194 July 27, 2010:
2195 !fix! western notation display didnt update correctly when key was set to a numeric value.
2196 !fix! no overwriting of console command line
2197 +++ wrap around of console command history
2198 +++ notation saved into settings.tcl
2199 +++ ~/.din/init.tcl for custom Tcl scripts to be loaded at startup.
2200 +++ set_kb_layout/kbl <layout> command. kbl us sets to us layout. kbl uk sets uk layout.
2201 July 23, 2010:
2202 !!!check b4 din workshop at usurp gallery, london
2203 *** will try to make a live cd with this version
2204 +++ new sound patterns added (one, one-lr, two, two-1, three, many)
2205 July 19, 2010:
2206 !!!+++ experimental MIDI support using modified RtMidi library
2207 !!!source ~/.din/midi.tcl after install; turn on gaters and move any sliders u have to change the gater bpm
2208 !!!set min 0; set max 240; set which g ;# set which fm will change fm bpm.
2209 July 18, 2010:
2210 * Happy birthday to self! jag turns 35. a hub. a dad. not a millionaire. Only want to do what I do now at 40 - maybe also want to be more famous and print money.
2211 *** phrasor optimisation, draw a red marker to id phrase start during a recording so its easy to finish at that point,
2212 *** phrasor playback starts at beginning of last recorded phrase
2213 !!! bug fix in phrasor when pausing doesnt leave mouse at the right note, these bugs introed because we move from absolute to relative mouse calculation
2214 !!! bug fix no jump of mouse when phrasor is playing and u leave board to the editors and come back.
2215 !!! test required.
2216 July 15, 2010:
2217 * changed name of waveform from noname to wave in file data/one - the one resonator file
2218 * removed key get from key command its available as getv key
2219 July 14, 2010:
2220 +++set_curve_editor, get_curve_editor to place different curve editors on different screens.
2221 July 11, 2010:
2222 +++!!! din-1.1.2 - jack, oss (branch) support updated.
2223 +++ delay feedback, volume curves, only time is value
2224 *** fixed undo/redo/copy/paste bug on multi_curve
2225 *** fixed morse code trailing spacings and morse code is now on copy curve to paste
2226 +++ save_settings.tcl to save settings into ~/.din/settings.tcl which is loaded on next din start
2227
2228 June 03, 2010:
2229 * din-1.1 RC.
2230 * cleaned up documentation
2231 * sa command is gone. tonic/key is substitute.
2232 May 31, 2010:
2233 +++ Tcl interpreter is the din command line.
2234 +++ Oscilloscope fully moveable and resizeable.
2235 +++ message announcing current curve editor
2236 *** fixed note marking in strength editor
2237 !!! Oscilloscope drawing optimised with single call to glDrawArrays instead of glBegin() ..glVertex3f..glEnd ()
2238 May 18, 2010:
2239 *** Tcl/Tk integration getting mature
2240 !+++! experimental linebreaking and wordwrap added to console - disabled by default
2241 +++ new variable sa so can do gv sa
2242 --- removing tcl command - no longer required as Tcl/Tk interpeter is the din command line
2243
2244 May 15, 2010:
2245
2246 !+++! experimental tcl/tk integration.
2247 +++ new tcl command - syntax tcl <tcl_command>
2248 * this will let us script din with tcl and also make custom uis using tk.
2249 +++ sa.tcl. to bring up ui, do tcl source ~/.din/sa.tcl
2250
2251 *** mouse capture replay doesnt warp the mouse, draws a cross indicating playback position.
2252
2253 May 13, 2010:
2254 +++ morse code -> bezier curve -> waveform/am/fm/gaters/octave_shift
2255 *** editable beizer curve based patterns for dot, dash, inner spacing, letter spacing and word spacing.
2256
2257 May 5, 2010:
2258 +++!!!*** jack is now trunk
2259 +++!!!*** oss is a branch https://din.googlecode.com/svn/branches/oss
2260 *** oss is faster than jack but allows no collaboration.
2261 +++ oscilloscope is back on jack
2262 *** major renames of many files in din/data
2263 *** optimised keyboard handling in curve_editor.cc/h, din.cc/h
2264 *** new gater patterns, new octave shift patterns, tastier defaults
2265 April 27, 2010:
2266 !!! experimental jack support
2267 +++ autoconnect to system:playback_1 and system:playback_2 ports to start playing audio
2268 April 26, 2010:
2269 *** optimised keyboard handling
2270 April 25, 2010:
2271 +++drones can be created to any tone. can be snapped to a note.
2272 +++gaters on/off command
2273 +++snap_drones var to setv/getv commands
2274 sv snap_drones 0 or 1
2275 gv snap_drones
2276 +++reenabled the drone editor
2277 April 23, 2010:
2278 rc 1.0.6
2279 ++sa/key display on pressing ;
2280 --drones are synced only on startup
2281 **pfx changed to p in bot command
2282 April 22, 2010:
2283 prepping for version 1.0.6
2284 +++bot::setset()
2285 +++tests if bot is running when outputing mesg with it
2286 ***gate->g, gate-l->gl, gate-r->gr, all->a in set_bpm, get_bpm, set_style, get_style commands
2287 April 18, 2010:
2288 prepping for version 1.0.6.
2289 +octave shift with controllable bpm and progress curve.
2290 +octave shift editor (press 7)
2291 +octave_shift.lib - library of octave shift progress curves.
2292 *libircclient expected at /usr/lib/ and /usr/include/libircclient - need to change this to use pkg-config.
2293 April 15, 2010:
2294 * check b4 openlab opennight #4
2295 * reworked solver so that custom min and max handlers can be used to get looping (in waveform) but ping-pong (in gaters, fm, am)
2296 * inlined these functions but if they were not inlined then maybe slightly slower (nanoseconds? microseconds? testing needed)
2297 * default is ping-pong on gaters, fm, am
2298 April 12, 2010:
2299 ---removed multi_curve copy constructor and operator=, color and name restored after default copy.
2300 ***chrono uses <ctime> ie CLOCKS_PER_SEC and clock() for timing instead of sample based timing. can therefore use it for non-audio timing.
2301 ***mouse command changed for relative mouse movement instead of absolute positioning. making it selectable is a better goal.
2302 !!!removed otransmit code in osc.cc and osc(..) removes timers as timer struct removed from chrono.h/cc. no problem for osc recieve.
2303 ***using SDLK keycodes in curve library handling in curve_editor.
2304 !!!fixed bug in osc due to stringstream/tokenizer mixup.
2305 April 5, 2010:
2306 +++get_font_size command
2307 +++xsize and ysize are cell width and cell height for font can be set independently
2308 ***updated set_font_size command to handle xsize and ysize
2309 xxxhopefully fixed the font save bug - was writing a null character b4.
2310 ***updated cell_size code to prevent squash/stretch of font when varying its xsize and ysize***
2311 April 3, 2010:
2312 +++tokenizer.cc/.h - ditching stringstream
2313 !!!font size bug still persists - do not use set_font_size command!!!
2314 +++ircu.patch - patch for ircu irc server ircd undernet to allow messages to flood the channel
2315 so that din can send and receive data freely without any limits.
2316 march 31, 2010:
2317 +++varun: happy birthday.
2318 ***+++ irc bot cleaned up, with doc
2319 ***fixed (assuming strongly) kerning and font size bug
2320 ---all .hlp files from data
2321 march 25, 2010:
2322 +++ added doc directory. will move all help files here in the future.
2323 but its not ready yet. so we use help files in data.
2324 +++ added mouse <x> <y> command, untested but no harm if not used.
2325 +++ octave shift shortcuts changed to z and x due to keymap issue on non english keyboards. need to check this.
2326 march 23, 2010:
2327 $$$ work in progress: 1.0.5.1
2328 *** enhanced sa command to apply octave modifiers to values not just note names. mouse warp toggle added too.
2329 +++ added octave shift short cut [].
2330 +++ brought am, fm, gate-l, gate-r parameters as keyboard shortcuts
2331 +++ FIXED BUG: creating a drone outside the ranges didnt create the drone on the correct note.
2332 *** using keycodes instead of characters ie SDLK_SLASH instead of / character to check slash so
2333 that it works on all keyboards.
2334 --- replaced din_help.txt with din.hlp.
2335 march 20, 2010:
2336 $$$ release 1.0.4.1.
2337 *** if no audio, din continues to work. can edit resonators and drones.
2338 *** better selection of drones.
2339 +++ aout command to control OSS audio parameters. can also edit ~/.din/audio_prefs.
2340 march 16, 2010:
2341 !!!+++ ditched portaudio and moved to oss. portaudio was using oss anyway. with direct oss can set many audio buffer parameters.+++!!!
2342 !!!testing required on this oss port!!!
2343 march 12, 2010:
2344 ** made basic install of din easy such that its a gateway to explore more complex features of din.
2345 +++ allow din board height to be changed allowing finer or coarser volume control.
2346 march 08, 2010:
2347 + sine wave -> bezier curve: export sine wave generated with the sine_mixer as a bezier waveform. 100 vertices with folded tangents generated. a ui/command to reduce/control number of generated points desired.
2348 + bezier curve -> sine wave: import fft levels of a bezier waveform into sine levels and alter the drawn sine wave. only partially correct as it doesnt import phase information from the fft. works when phase is 0.
2349 + clear/erase harmonic by pressing 'c' over sine levels.
2350 ! use resonator names from file instead of resetting to default name/numbering.
2351 + current curve editor var in uis_t to keep track of the current curve editor so we can run curve commands on the console.
2352 + curve_name command to set the curve name. possible due to previous feature.
2353 * worked on resonators in file: resonators, one
2354 december 18, 2009:
2355 ** bug fixed: pan and zoom with shift+a/d and shift+q/e
2356 november 20, 2009:
2357 assigned curve names, save and load curve names when curves are loaded. default name is noname.
2358 fixed bug: can change resolution of curves in modulation and gater editors.
2359 november 13, 2009:
2360 mouse position saved and restored on din board
2361 TODO: but must be done for all ui screens and must also restore window position
2362 november 11, 2009:
2363 console rollup state saved/restored
2364 removed numeric notation of ranges as it doesnt work for keys other than C. will revisit later.
2365 november 9, 2009:
2366 removed set_bg command - no range color filling, just plain looking ui. its the sound we are after.
2367 notation support: indian (S r etc), western (C C# etc) and numeric (1 2b etc)
2368 optimised solver.h/cc again to return last result when y cannot be solved for given x.
2369 FIXED BUG: In console, if you clear text (press backspace), and rollup console - crash
2370 fixed colors used for drawing ranges, phrasor position and drone makers
2371 november 4, 2009:
2372 *** cleaned up the trunk
2373 !!! optimised the configure.ac and Makefile.am
2374 +++ BUGS
2375 october 15, 2009:
2376 ***marked position of phrasor when paused
2377 october 14, 2009:
2378 +++get_kern command to get character kerning in the font.
2379 +++added {}`| characters to the font
2380 october 10, 2009:
2381 !!!!++++multicore support added
2382 +++xset m 0 0 to reset mouse to zero acceleration and threshold when
2383 din, and restore upon exit.
2384 october 9, 2009:
2385 !!! fixed ranga backdrop drawing bug
2386 +++ added support for audio out via alsa dmix so that you could play
2387 an audio clip in the background and play din over it.
2388 *** preparing for release of din. version 1.
2389 may 7, 2009:
2390 +++fft.cc, fft.h - separated fft engine from curve editor
2391 ***worked on the resonators
2392 may 6, 2009:
2393 +++ added ability to move the mouse in curve editors with the keyboard
2394 +++ vary the pan and zoom speeds