Debian Codegraph @

tools/boot/kali-last-snapshot/boot-x86

raw
1 # This script gets sourced from boot-i386 and boot-amd64.
2 #
3 # Do install stuff for x86, including making bootable CDs
4 # Works with debian-installer
5 #
6 # $1 is the CD number
7 # $2 is the temporary CD build dir
8
9 . $BASEDIR/tools/boot/$DI_CODENAME/common.sh
10 . $BASEDIR/tools/boot/$DI_CODENAME/x86-desktop.sh
11
12 set -e
13 #set -x
14
15 # Workaround for #823881:
16 export MTOOLS_SKIP_CHECK=1
17
18 # Have we been told to use just one boot method? If none listed,
19 # assume all are desired. Order also matters. Possible values are
20 # "BIOS", "EFI" and "BIOS EFI". We'll also accept "EFI BIOS" for
21 # completeness, but we will switch the order.
22 if [ "$BOOT_METHODS"x = ""x ] \
23 || [ "$BOOT_METHODS"x = "BIOS EFI"x ] \
24 || [ "$BOOT_METHODS"x = "EFI BIOS"x ] ; then
25 BOOT_BIOS=1
26 BOOT_EFI=2
27 elif [ "$BOOT_METHODS"x = "BIOS"x ] ; then
28 BOOT_BIOS=1
29 BOOT_EFI=0
30 elif [ "$BOOT_METHODS"x = "EFI"x ] ; then
31 BOOT_EFI=1
32 BOOT_BIOS=0
33 else
34 echo "ERROR: Unrecognized boot method choice $BOOT_METHODS"
35 exit 1
36 fi
37
38 # amd64 builds will also include 32-bit UEFI files by default, to
39 # allow for booting on weird machines with 64-bit CPUs but 32-bit
40 # firmware like Baytrail or some models of Apple iMac. Set
41 # DISABLE_UEFI_32=1 in your config to disable this.
42
43 N=$1
44 CDDIR=$2
45 BOOTDIR=
46 if [ "$DI_WWW_HOME" = "default" ]; then
47 # Tempting as it might be to merge these two definitions using $ARCH,
48 # do *not* do that - these defs are parsed out by other scripts that
49 # won't cope with that
50 if [ "$ARCH" = amd64 ]; then
51 DI_WWW_HOME="https://d-i.debian.org/daily-images/amd64/daily"
52 else
53 DI_WWW_HOME="https://d-i.debian.org/daily-images/i386/daily"
54 fi
55 try_di_image_cache
56 else
57 DI_WWW_HOME=$(echo $DI_WWW_HOME | sed "s,%ARCH%,$ARCH,")
58 fi
59 DI_WWW_HOME_i386=$(echo $DI_WWW_HOME | sed 's/amd64/i386/g')
60 DI_WWW_HOME_amd64=$(echo $DI_WWW_HOME | sed 's/i386/amd64/g')
61
62 case "$MKISOFS" in
63 *xorriso*)
64 XORRISO_VER=$(xorriso_version)
65 ;;
66 *)
67 echo "ERROR: debian-cd now depends on xorriso for making x86 bootable CDs."
68 exit 1;
69 ;;
70 esac
71
72 cd $CDDIR/..
73
74 # This script is called with $1 (now $N) as the CD to make bootable.
75 # Exit if this is not a boot disk
76 if [ $N != 1 ] ; then exit 0; fi
77
78 INSTALLDIR_amd64="install.amd"
79 INSTALLDIR_i386="install.386"
80
81 if [ "$ARCH" = amd64 ]; then
82 INSTALLDIR="$INSTALLDIR_amd64"
83 else
84 INSTALLDIR="$INSTALLDIR_i386"
85 fi
86
87 if [ $ARCH = amd64 ]; then
88 BOOT_IMAGES="cdrom/initrd.gz cdrom/vmlinuz cdrom/cd_info_amd64 "
89 if [ "$DISABLE_UEFI_32"x = "1"x ]; then
90 echo " NOT retrieving i386 EFI files"
91 else
92 echo " Retrieving i386 EFI files also on amd64 build"
93 BOOT_IMAGES="$BOOT_IMAGES cdrom/cd_info_i386"
94 fi
95 else
96 BOOT_IMAGES="cdrom/initrd.gz cdrom/vmlinuz cdrom/cd_info_i386"
97 fi
98
99 # Download boot images.
100 for image in $BOOT_IMAGES; do
101 if [ ! -e "$image" ]; then
102 dir=$(dirname $image)
103 mkdir -p $dir
104 case $image in
105 *cd_info_*)
106 THIS_ARCH=${image##cdrom/cd_info_}
107 image_in=cdrom/debian-cd_info.tar.gz
108 ;;
109 *)
110 THIS_ARCH=$ARCH
111 image_in=$image
112 ;;
113 esac
114
115 if [ -n "$LOCAL" -a -f "${LOCALDEBS:-$MIRROR}/dists/$DI_DIST/local/installer-$THIS_ARCH/current/images/$image_in" ]; then
116 cp "${LOCALDEBS:-$MIRROR}/dists/$DI_DIST/local/installer-$THIS_ARCH/current/images/$image_in" "$image"
117 elif [ ! "$DI_WWW_HOME" ];then
118 if [ ! "$DI_DIR" ];then
119 DI_DIR="$MIRROR/dists/$DI_DIST/main/installer-%ARCH%/current/images"
120 fi
121 DI_DIR_i386=$(echo $DI_DIR | sed 's/%ARCH%/i386/g')
122 DI_DIR_amd64=$(echo $DI_DIR | sed 's/%ARCH%/amd64/g')
123 THIS_DI_DIR=DI_DIR_${THIS_ARCH}
124 cp "${!THIS_DI_DIR}/$image_in" "$image"
125 else
126 THIS_DI_WWW_HOME="DI_WWW_HOME_${THIS_ARCH}"
127 $WGET "${!THIS_DI_WWW_HOME}/$image_in" -O "$image"
128 fi
129 fi
130 done
131
132 # Reset this to a sane value
133 if [ "$DI_DIR" = "$MIRROR/dists/$DI_DIST/main/installer-%ARCH%/current/images" ]; then
134 DI_DIR="$MIRROR/dists/$DI_DIST/main/installer-$ARCH/current/images"
135 fi
136
137 # Images that are not really required or may be unavailable.
138 for image in $DISK_IMAGES $EXTRA_DISK_IMAGES; do
139 if [ ! -e "$image" ]; then
140 dir=$(dirname $image)
141 mkdir -p $dir
142 if [ -n "$LOCAL" -a -f "${LOCALDEBS:-$MIRROR}/dists/$DI_DIST/local/installer-$ARCH/current/images/$image" ]; then
143 cp "${LOCALDEBS:-$MIRROR}/dists/$DI_DIST/local/installer-$ARCH/current/images/$image" "$image"
144 elif [ ! "$DI_WWW_HOME" ];then
145 if [ ! "$DI_DIR" ];then
146 DI_DIR="$MIRROR/dists/$DI_DIST/main/installer-$ARCH/current/images"
147 fi
148 cp "$DI_DIR/$image" "$image" || true
149 else
150 $WGET "$DI_WWW_HOME/$image" -O "$image" || rm -f "$image"
151 fi
152 fi
153 done
154
155 # Only disk one gets the extra files installed
156 if [ "$N" = "1" ]; then
157 # populate the install directory as well
158 for disk in $DISK_IMAGES $EXTRA_DISK_IMAGES; do
159 if [ -e "$disk" ]; then
160 dir=$(dirname $disk)
161 mkdir -p $CDDIR/$INSTALLDIR/$dir
162 cp -lf $disk $CDDIR/$INSTALLDIR/$dir
163 fi
164 done
165 fi
166
167 case "$DESKTOP" in
168 $UNSPEC_DESKTOP_DEFAULT)
169 # default from tasksel
170 DESKTOP=
171 ;;
172 all)
173 # default from tasksel
174 DESKTOP=
175 ;;
176 light)
177 DESKTOP=xfce
178 ;;
179 esac
180 # desktop boot parameter gets set separately through DESKTOP variable
181 KERNEL_PARAMS="$(echo "$KERNEL_PARAMS" | sed -r "s/desktop=[^ ]* ?//")"
182
183 mkdir -p $CDDIR/$INSTALLDIR
184 cp -lf cdrom/vmlinuz $CDDIR/$INSTALLDIR/
185 cp -lf cdrom/initrd.gz $CDDIR/$INSTALLDIR/
186
187 # In case of a multi-arch CD the script will be called two times. The
188 # first time the isolinux dir gets set up for single arch; if it is
189 # called a second time the isolinux dir already exists and we know it
190 # will be multi-arch. We then throw away the first version and just
191 # configure things from scratch for multi-arch.
192
193 MULTIARCH=
194 if [ -e boot$N/isolinux/isolinux.cfg ]; then
195 MULTIARCH=1
196 rm -r boot$N/isolinux
197 fi
198
199 mkdir -p boot$N/isolinux
200 # Isolinux setup including config and help files comes from d-i.
201 cat cdrom/cd_info_$ARCH | (cd boot$N/isolinux/; tar zx)
202 mv boot$N/isolinux/grub boot$N/isolinux/grub-$ARCH
203 if [ $ARCH = amd64 ] && [ "$DISABLE_UEFI_32"x != "1"x ]; then
204 # Also extract i386 grub files, for Bay Trail etc.
205 echo " Extracting i386 EFI files also on amd64 build"
206 cat cdrom/cd_info_i386 | (cd boot$N/isolinux/; tar zx ./grub)
207 mv boot$N/isolinux/grub boot$N/isolinux/grub-i386
208 fi
209
210 # Common mkisofs options when creating CDs
211 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-J -joliet-long"
212 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-cache-inodes"
213
214 # BIOS-boot specific stuff. Even when we're *not* doing BIOS boot, we
215 # still create all the isolinux config files as they're parsed and
216 # used later. We just don't grab all the syslinux files, then make
217 # sure that we *don't* set up BIOS boot on the xorriso command line.
218 if [ "$BOOT_BIOS" = 1 ] ; then
219 echo " Adding BIOS boot code for $ARCH on CD$N"
220 mkdir -p $CDDIR/../syslinux
221 SYSLINUXDEB=$(find_pkg_file syslinux)
222 if [ -z "$SYSLINUXDEB" ]; then
223 echo "ERROR: syslinux package is required" >&2
224 exit 1
225 fi
226 (dpkg --fsys-tarfile "$MIRROR/$SYSLINUXDEB" | \
227 tar xf - -C $CDDIR/../syslinux ./usr/lib)
228
229 if [ -n "$ARCHIVE_EXTRACTED_SOURCES" ]; then
230 echo $SYSLINUXDEB >> $CDDIR/../$N.pkgs_extracted
231 find_pkg_file syslinux source >> $CDDIR/../$N.pkgs_extracted
232 fi
233
234 ISOLINUXDEB=$(find_pkg_file isolinux)
235 if [ -z "$ISOLINUXDEB" ]; then
236 echo "ERROR: isolinux package is required" >&2
237 exit 1
238 fi
239 (dpkg --fsys-tarfile "$MIRROR/$ISOLINUXDEB" | \
240 tar xf - -C $CDDIR/../syslinux ./usr/lib)
241
242 if [ -n "$ARCHIVE_EXTRACTED_SOURCES" ]; then
243 echo $ISOLINUXDEB >> $CDDIR/../$N.pkgs_extracted
244 find_pkg_file isolinux source >> $CDDIR/../$N.pkgs_extracted
245 fi
246 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-isohybrid-mbr syslinux/usr/lib/ISOLINUX/isohdpfx.bin"
247
248 cp -f $CDDIR/../syslinux/usr/lib/ISOLINUX/isolinux.bin boot$N/isolinux/
249 cp -f $CDDIR/../syslinux/usr/lib/syslinux/modules/bios/vesamenu.c32 boot$N/isolinux/
250 cp -f $CDDIR/../syslinux/usr/lib/syslinux/modules/bios/ldlinux.c32 boot$N/isolinux/
251 cp -f $CDDIR/../syslinux/usr/lib/syslinux/modules/bios/libcom32.c32 boot$N/isolinux/
252 cp -f $CDDIR/../syslinux/usr/lib/syslinux/modules/bios/libutil.c32 boot$N/isolinux/
253
254 if [ ! -z "$MULTIARCH" ]; then
255 # Mandatory for 64bits capability detection
256 if [ -f $CDDIR/../syslinux/usr/lib/syslinux/modules/bios/ifcpu64.c32 ] ; then
257 cp -f $CDDIR/../syslinux/usr/lib/syslinux/modules/bios/ifcpu64.c32 boot$N/isolinux/
258 else
259 cp -f $CDDIR/../syslinux/usr/lib/syslinux/ifcpu64.c32 boot$N/isolinux/
260 fi
261 fi
262
263 # If we don't have grub stuff from d-i, tell xorriso to add a
264 # partition offset for the isohybrid code
265 if [ ! -d boot$N/isolinux/grub-$ARCH ] || [ $BOOT_EFI = 0 ] ; then
266 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-partition_offset 16"
267 fi
268
269 # Add the normal options to make an ElTorito bootable CD/DVD using isolinux
270 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-b isolinux/isolinux.bin"
271 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-c isolinux/boot.cat"
272 bls=4 # Specify 4 for BIOS boot, don't calculate it
273 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-boot-load-size $bls"
274 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-boot-info-table"
275 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-no-emul-boot"
276
277 # We explicitly put the boot bits in boot$N (as opposed to CD$N)
278 # and list it first on the eventual mkisofs command line. That
279 # means they'll be placed nearer the front of the eventual image;
280 # some older BIOSes apparently have a limitation on what they'll
281 # boot here.
282 add_mkisofs_opt $CDDIR/../$N.mkisofs_dirs "boot$N"
283 else
284 echo " No BIOS boot code for $ARCH on CD$N"
285 fi
286
287 di_syslinux_ver="$(di_syslinux_version)"
288 case "$di_syslinux_ver" in
289 2.0)
290 : ;;
291 1.*)
292 echo "Error: syslinux config versions before 2.0 are not supported"
293 exit 1 ;;
294 *)
295 echo "Error: unrecognized syslinux config version '$di_syslinux_ver'"
296 exit 1 ;;
297 esac
298
299 if [ -e boot$N/isolinux/f3.txt.withgtk ]; then
300 extra_image gtk/vmlinuz "../vmlinuz"
301 extra_image gtk/initrd.gz "../initrd.gz"
302 mv boot$N/isolinux/f3.txt.withgtk boot$N/isolinux/f3.txt
303 mv boot$N/isolinux/f4.txt.withgtk boot$N/isolinux/f4.txt
304 if [ -e boot$N/isolinux/isolinux.cfg.withgtk ]; then
305 mv boot$N/isolinux/isolinux.cfg.withgtk boot$N/isolinux/isolinux.cfg
306 fi
307 if [ -e $CDDIR/tools/loadlin.exe ]; then
308 echo "\\tools\\loadlin.exe \\$INSTALLDIR\\vmlinuz initrd=initrd.gz vga=788" | todos > $CDDIR/$INSTALLDIR/gtk/install.bat
309 fi
310 fi
311 rm -f boot$N/isolinux/isolinux.cfg.with*
312
313 if variant_enabled "xen" ; then
314 extra_image xen/vmlinuz "../vmlinuz ../gtk/vmlinuz"
315 extra_image xen/initrd.gz "../initrd.gz ../gtk/initrd.gz"
316 extra_image xen/debian.cfg || extra_image xen/xm-debian.cfg
317 fi
318
319 if [ -z "$MULTIARCH" ]; then
320 # Set up isolinux dir for only the current arch
321 grep -lr '%install%' boot$N/isolinux/* | xargs -r sed -i "s|%install%|$INSTALLDIR|g"
322
323 # Remove the x86*.cfg files to avoid them being loaded on a disc
324 # that does not have both amd64 and i386 dirs.
325 find boot$N/isolinux/ -name "x86*.cfg" -delete
326 else
327 # Use the syslinux.cfg with architecture detection
328 mv boot$N/isolinux/x86syslinux.cfg boot$N/isolinux/isolinux.cfg
329
330 # Set up isolinux dir for multi-arch
331 grep -lr '%install[-x86]*%' boot$N/isolinux/* | \
332 xargs -r sed -i -e "s|%install%|$INSTALLDIR_amd64|g" \
333 -e "s|%install-x86%|$INSTALLDIR_i386|g"
334
335 for file in boot$N/isolinux/f3.txt* boot$N/isolinux/f4.txt*; do
336 sed -i "4 s/^$/(note: amd64 is default; prepend 'x86-' to use an i386 kernel instead)/" $file
337 done
338
339 if [ -e CD$N/win32-loader.ini ]; then
340 # Modify win32-loader.ini to also cover the "other" arch
341 if [ "$ARCH" = amd64 ]; then
342 sed -i -e "/^arch=/d
343 /^amd64\//p; s/^amd64/i386/; s/=$INSTALLDIR_amd64/=$INSTALLDIR_i386/g" \
344 CD$N/win32-loader.ini
345 else
346 sed -i -e "/^arch=/d
347 /^i386\//p; s/^i386/amd64/; s/=$INSTALLDIR_i386/=$INSTALLDIR_amd64/g" \
348 CD$N/win32-loader.ini
349 fi
350 fi
351
352 if [ "$BOOT_BIOS" = 1 ] ; then
353 # Add another ifcpu64.c32 launch to let the 'enter' in help menus work correctly
354 sed -i "/^include menu.cfg/ a\include instsel.cfg" \
355 boot$N/isolinux/prompt.cfg
356 cat >boot$N/isolinux/instsel.cfg <<EOF
357 default install-select
358 label install-select
359 kernel ifcpu64.c32
360 append installgui -- x86-installgui
361 EOF
362 fi
363 fi
364
365 if [ "$SPLASHPNG" ] ; then
366 cp $SPLASHPNG boot$N/isolinux/splash.png
367 fi
368
369 # used by Debian Edu
370 if [ "$LOGOPNG" ] ; then
371 # Add custom logo to the initrd.gz file, replacing old image
372 GTKINITRD=$CDDIR/$INSTALLDIR/gtk/initrd
373 GTKINITRDGZ=$GTKINITRD.gz
374 echo "info: Adding $LOGOPNG to $GTKINITRD"
375 INITRDDIR=$TDIR/initrd-$$
376 # Repack initrd with new image
377 mkdir -p $INITRDDIR
378 (
379 cd $INITRDDIR
380 # There may be multiple hardlinks to the initrd.gz, so
381 # explicitly break the links here
382 zcat $GTKINITRDGZ > $GTKINITRD
383 rm -f $GTKINITRDGZ
384 mkdir -p $INITRDDIR/usr/share/graphics
385 cp $LOGOPNG $INITRDDIR/usr/share/graphics/logo_debian.png
386 echo usr/share/graphics/logo_debian.png | \
387 cpio -oA -H newc -F $GTKINITRD
388 pigz -9nm $GTKINITRD
389 )
390 rm -rf $INITRDDIR
391 fi
392
393 # Include sound firmware in initrd so they can be loaded before espeakup starts
394 if [ -e "boot$N/isolinux/spk.cfg" ]; then
395 install_firmwares_initrd "$CDDIR/$INSTALLDIR/initrd" "firmware-sof-signed"
396 elif [ -e "boot$N/isolinux/spkgtk.cfg" ]; then
397 install_firmwares_initrd "$CDDIR/$INSTALLDIR/gtk/initrd" "firmware-sof-signed"
398 fi
399
400 sed -i "s|built on|built $BUILD_DATE; d-i|" boot$N/isolinux/f1.txt
401
402 if [ -n "$KERNEL_PARAMS" ]; then
403 # Substitute custom kernel params into the isolinux config file(s)
404 for file in boot$N/isolinux/*.cfg; do
405 case "$(basename $file)" in
406 instsel.cfg)
407 continue ;;
408 esac
409 sed -i "/^[[:space:]]\+append .*---/ s|append|append $KERNEL_PARAMS|" \
410 $file
411 done
412 fi
413
414 set_default_desktop
415 rm -rf cdrom
416
417 if [ -d boot$N/isolinux/grub-$ARCH ] && [ $BOOT_EFI -ne 0 ] ; then
418
419 # Move GRUB files to the right places
420 mkdir -p $CDDIR/EFI/boot
421 mkdir -p $CDDIR/boot/grub
422
423 for grub_arch in amd64 i386; do
424 SB=0
425 dir=boot$N/isolinux/grub-${grub_arch}
426
427 if [ ! -f $dir/efi.img ]; then
428 continue
429 fi
430
431 echo " Adding EFI boot code for $grub_arch on CD$N"
432
433 mcopy -n -s -i $dir/efi.img '::efi/*' $CDDIR/EFI
434
435 # Save space. if we have both files, that means we have shim
436 # *and* grub and we're doing secure boot. Don't copy all the
437 # grub modules into place in that case, as we're never going
438 # to use them anyway.
439 case $grub_arch in
440 amd64)
441 if [ -f $CDDIR/EFI/boot/bootx64.efi ] \
442 && [ -f $CDDIR/EFI/boot/grubx64.efi ]; then
443 SB=1
444 fi;;
445 i386)
446 if [ -f $CDDIR/EFI/boot/bootia32.efi ] \
447 && [ -f $CDDIR/EFI/boot/grubia32.efi ]; then
448 SB=1
449 fi;;
450 esac
451
452 cp -a $dir/*-efi $dir/*.cfg $CDDIR/boot/grub
453 if ls $dir/*.pf2 >/dev/null 2>&1; then
454 cp -a $dir/*.pf2 $CDDIR/boot/grub
455 fi
456 if [ -e $dir/fonts/ ]; then
457 cp -a $dir/fonts/ $CDDIR/boot/grub
458 fi
459 if [ $SB = 1 ]; then
460 echo " Removing non-SB grub files and config for $grub_arch"
461 rm -f $CDDIR/boot/grub/*-efi/*.mod $CDDIR/boot/grub/*-efi/*.lst
462 # Let's not have errors from trying to insmod modules that
463 # aren't there...
464 sed -i '/^insmod/d' $CDDIR/boot/grub/*-efi/*.cfg
465 fi
466
467 done
468
469 rm -rf boot$N/isolinux/grub*
470
471 # If we're only doing EFI, copy the splash file from the BIOS boot dir
472 if [ $BOOT_EFI = 1 ] ; then
473 mkdir -p $CDDIR/isolinux
474 cp boot$N/isolinux/splash.png $CDDIR/isolinux
475 fi
476
477 # Create grub menu entries to match the isolinux ones
478 sed -i '/^menuentry/Q' $CDDIR/boot/grub/grub.cfg;
479 $BASEDIR/tools/boot/$DI_CODENAME/parse_isolinux \
480 boot$N/isolinux $CDDIR $BASEDIR/data/$DI_CODENAME/grub-theme.in "$DISKINFO_DISTRO" "$DEBIAN_KERNEL" "$DEBVERSION" \
481 >> $CDDIR/boot/grub/grub.cfg
482 cp $BASEDIR/data/$DI_CODENAME/hl*png $CDDIR/boot/grub/theme
483 NUM_ENTRIES=$(grep menuentry $CDDIR/boot/grub/grub.cfg | wc -l)
484 echo " CD$N/boot/grub/grub.cfg has $NUM_ENTRIES boot entries defined"
485
486 change_grub_cfg_uuid $CDDIR
487
488 # Stuff the EFI boot files into a FAT filesystem, making it as
489 # small as possible. We end up re-packing like this in case we're
490 # making a multi-arch image
491
492 # First, work out how many blocks we need
493 blocks=$(calculate_efi_image_size $CDDIR)
494
495 # Now make a new image to contain the files
496 rm -f $CDDIR/boot/grub/efi*.img
497 mkfs.msdos --invariant -v -i deb00001 -C "$CDDIR/boot/grub/efi.img" $blocks >/dev/null
498
499 # And copy them into place
500 mmd -i "$CDDIR/boot/grub/efi.img" ::efi
501 mcopy -o -s -i "$CDDIR/boot/grub/efi.img" $CDDIR/EFI/* \
502 "::efi"
503
504 if [ $BOOT_EFI = 2 ] ; then
505 # We're being added alongside (after) a BIOS boot record. Tell
506 # xorriso to create a (secondary) ElTorito boot record for the
507 # EFI bootloader. Otherwise, xorriso will create it as the
508 # primary.
509 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-eltorito-alt-boot"
510 fi
511
512 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-e boot/grub/efi.img -no-emul-boot"
513 add_mkisofs_opt $CDDIR/../$N.mkisofs_opts "-isohybrid-gpt-basdat -isohybrid-apm-hfsplus"
514 else
515 echo " No EFI boot code for $ARCH on CD$N"
516 fi
517
518 # th,th, thats all
519