Debian Codegraph @

deps/curl/tests/sshserver.pl

raw
1 #!/usr/bin/env perl
2 #***************************************************************************
3 # _ _ ____ _
4 # Project ___| | | | _ \| |
5 # / __| | | | |_) | |
6 # | (__| |_| | _ <| |___
7 # \___|\___/|_| \_\_____|
8 #
9 # Copyright (C) 1998 - 2019, Daniel Stenberg, <[email protected]>, et al.
10 #
11 # This software is licensed as described in the file COPYING, which
12 # you should have received as part of this distribution. The terms
13 # are also available at https://curl.haxx.se/docs/copyright.html.
14 #
15 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
16 # copies of the Software, and permit persons to whom the Software is
17 # furnished to do so, under the terms of the COPYING file.
18 #
19 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
20 # KIND, either express or implied.
21 #
22 #***************************************************************************
23
24 # Starts sshd for use in the SCP and SFTP curl test harness tests.
25 # Also creates the ssh configuration files needed for these tests.
26
27 use strict;
28 use warnings;
29 use Cwd;
30 use Cwd 'abs_path';
31
32 #***************************************************************************
33 # Variables and subs imported from sshhelp module
34 #
35 use sshhelp qw(
36 $sshdexe
37 $sshexe
38 $sftpsrvexe
39 $sftpexe
40 $sshkeygenexe
41 $sshdconfig
42 $sshconfig
43 $sftpconfig
44 $knownhosts
45 $sshdlog
46 $sshlog
47 $sftplog
48 $sftpcmds
49 $hstprvkeyf
50 $hstpubkeyf
51 $cliprvkeyf
52 $clipubkeyf
53 display_sshdconfig
54 display_sshconfig
55 display_sftpconfig
56 display_sshdlog
57 display_sshlog
58 display_sftplog
59 dump_array
60 find_sshd
61 find_ssh
62 find_sftpsrv
63 find_sftp
64 find_sshkeygen
65 logmsg
66 sshversioninfo
67 );
68
69 #***************************************************************************
70 # Subs imported from serverhelp module
71 #
72 use serverhelp qw(
73 server_pidfilename
74 server_logfilename
75 );
76
77 use pathhelp;
78
79 #***************************************************************************
80
81 my $verbose = 0; # set to 1 for debugging
82 my $debugprotocol = 0; # set to 1 for protocol debugging
83 my $port = 8999; # our default SCP/SFTP server port
84 my $listenaddr = '127.0.0.1'; # default address on which to listen
85 my $ipvnum = 4; # default IP version of listener address
86 my $idnum = 1; # default ssh daemon instance number
87 my $proto = 'ssh'; # protocol the ssh daemon speaks
88 my $path = getcwd(); # current working directory
89 my $logdir = $path .'/log'; # directory for log files
90 my $username = $ENV{USER}; # default user
91 my $pidfile; # ssh daemon pid file
92 my $identity = 'curl_client_key'; # default identity file
93
94 my $error;
95 my @cfgarr;
96
97
98 #***************************************************************************
99 # Parse command line options
100 #
101 while(@ARGV) {
102 if($ARGV[0] eq '--verbose') {
103 $verbose = 1;
104 }
105 elsif($ARGV[0] eq '--debugprotocol') {
106 $verbose = 1;
107 $debugprotocol = 1;
108 }
109 elsif($ARGV[0] eq '--user') {
110 if($ARGV[1]) {
111 $username = $ARGV[1];
112 shift @ARGV;
113 }
114 }
115 elsif($ARGV[0] eq '--id') {
116 if($ARGV[1]) {
117 if($ARGV[1] =~ /^(\d+)$/) {
118 $idnum = $1 if($1 > 0);
119 shift @ARGV;
120 }
121 }
122 }
123 elsif($ARGV[0] eq '--ipv4') {
124 $ipvnum = 4;
125 $listenaddr = '127.0.0.1' if($listenaddr eq '::1');
126 }
127 elsif($ARGV[0] eq '--ipv6') {
128 $ipvnum = 6;
129 $listenaddr = '::1' if($listenaddr eq '127.0.0.1');
130 }
131 elsif($ARGV[0] eq '--addr') {
132 if($ARGV[1]) {
133 my $tmpstr = $ARGV[1];
134 if($tmpstr =~ /^(\d\d?\d?)\.(\d\d?\d?)\.(\d\d?\d?)\.(\d\d?\d?)$/) {
135 $listenaddr = "$1.$2.$3.$4" if($ipvnum == 4);
136 shift @ARGV;
137 }
138 elsif($ipvnum == 6) {
139 $listenaddr = $tmpstr;
140 $listenaddr =~ s/^\[(.*)\]$/$1/;
141 shift @ARGV;
142 }
143 }
144 }
145 elsif($ARGV[0] eq '--pidfile') {
146 if($ARGV[1]) {
147 $pidfile = "$path/". $ARGV[1];
148 shift @ARGV;
149 }
150 }
151 elsif($ARGV[0] eq '--sshport') {
152 if($ARGV[1]) {
153 if($ARGV[1] =~ /^(\d+)$/) {
154 $port = $1;
155 shift @ARGV;
156 }
157 }
158 }
159 else {
160 print STDERR "\nWarning: sshserver.pl unknown parameter: $ARGV[0]\n";
161 }
162 shift @ARGV;
163 }
164
165
166 #***************************************************************************
167 # Default ssh daemon pid file name
168 #
169 if(!$pidfile) {
170 $pidfile = "$path/". server_pidfilename($proto, $ipvnum, $idnum);
171 }
172
173
174 #***************************************************************************
175 # ssh and sftp server log file names
176 #
177 $sshdlog = server_logfilename($logdir, 'ssh', $ipvnum, $idnum);
178 $sftplog = server_logfilename($logdir, 'sftp', $ipvnum, $idnum);
179
180
181 #***************************************************************************
182 # Logging level for ssh server and client
183 #
184 my $loglevel = $debugprotocol?'DEBUG3':'DEBUG2';
185
186
187 #***************************************************************************
188 # Validate username
189 #
190 if(!$username) {
191 $error = 'Will not run ssh server without a user name';
192 }
193 elsif($username eq 'root') {
194 $error = 'Will not run ssh server as root to mitigate security risks';
195 }
196 if($error) {
197 logmsg $error;
198 exit 1;
199 }
200
201
202 #***************************************************************************
203 # Find out ssh daemon canonical file name
204 #
205 my $sshd = find_sshd();
206 if(!$sshd) {
207 logmsg "cannot find $sshdexe";
208 exit 1;
209 }
210
211
212 #***************************************************************************
213 # Find out ssh daemon version info
214 #
215 my ($sshdid, $sshdvernum, $sshdverstr, $sshderror) = sshversioninfo($sshd);
216 if(!$sshdid) {
217 # Not an OpenSSH or SunSSH ssh daemon
218 logmsg $sshderror if($verbose);
219 logmsg 'SCP and SFTP tests require OpenSSH 2.9.9 or later';
220 exit 1;
221 }
222 logmsg "ssh server found $sshd is $sshdverstr" if($verbose);
223
224
225 #***************************************************************************
226 # ssh daemon command line options we might use and version support
227 #
228 # -e: log stderr : OpenSSH 2.9.0 and later
229 # -f: sshd config file : OpenSSH 1.2.1 and later
230 # -D: no daemon forking : OpenSSH 2.5.0 and later
231 # -o: command-line option : OpenSSH 3.1.0 and later
232 # -t: test config file : OpenSSH 2.9.9 and later
233 # -?: sshd version info : OpenSSH 1.2.1 and later
234 #
235 # -e: log stderr : SunSSH 1.0.0 and later
236 # -f: sshd config file : SunSSH 1.0.0 and later
237 # -D: no daemon forking : SunSSH 1.0.0 and later
238 # -o: command-line option : SunSSH 1.0.0 and later
239 # -t: test config file : SunSSH 1.0.0 and later
240 # -?: sshd version info : SunSSH 1.0.0 and later
241
242
243 #***************************************************************************
244 # Verify minimum ssh daemon version
245 #
246 if((($sshdid =~ /OpenSSH/) && ($sshdvernum < 299)) ||
247 (($sshdid =~ /SunSSH/) && ($sshdvernum < 100))) {
248 logmsg 'SCP and SFTP tests require OpenSSH 2.9.9 or later';
249 exit 1;
250 }
251
252
253 #***************************************************************************
254 # Find out sftp server plugin canonical file name
255 #
256 my $sftpsrv = find_sftpsrv();
257 if(!$sftpsrv) {
258 logmsg "cannot find $sftpsrvexe";
259 exit 1;
260 }
261 logmsg "sftp server plugin found $sftpsrv" if($verbose);
262
263
264 #***************************************************************************
265 # Find out sftp client canonical file name
266 #
267 my $sftp = find_sftp();
268 if(!$sftp) {
269 logmsg "cannot find $sftpexe";
270 exit 1;
271 }
272 logmsg "sftp client found $sftp" if($verbose);
273
274
275 #***************************************************************************
276 # Find out ssh keygen canonical file name
277 #
278 my $sshkeygen = find_sshkeygen();
279 if(!$sshkeygen) {
280 logmsg "cannot find $sshkeygenexe";
281 exit 1;
282 }
283 logmsg "ssh keygen found $sshkeygen" if($verbose);
284
285
286 #***************************************************************************
287 # Find out ssh client canonical file name
288 #
289 my $ssh = find_ssh();
290 if(!$ssh) {
291 logmsg "cannot find $sshexe";
292 exit 1;
293 }
294
295
296 #***************************************************************************
297 # Find out ssh client version info
298 #
299 my ($sshid, $sshvernum, $sshverstr, $ssherror) = sshversioninfo($ssh);
300 if(!$sshid) {
301 # Not an OpenSSH or SunSSH ssh client
302 logmsg $ssherror if($verbose);
303 logmsg 'SCP and SFTP tests require OpenSSH 2.9.9 or later';
304 exit 1;
305 }
306 logmsg "ssh client found $ssh is $sshverstr" if($verbose);
307
308
309 #***************************************************************************
310 # ssh client command line options we might use and version support
311 #
312 # -D: dynamic app port forwarding : OpenSSH 2.9.9 and later
313 # -F: ssh config file : OpenSSH 2.9.9 and later
314 # -N: no shell/command : OpenSSH 2.1.0 and later
315 # -p: connection port : OpenSSH 1.2.1 and later
316 # -v: verbose messages : OpenSSH 1.2.1 and later
317 # -vv: increase verbosity : OpenSSH 2.3.0 and later
318 # -V: ssh version info : OpenSSH 1.2.1 and later
319 #
320 # -D: dynamic app port forwarding : SunSSH 1.0.0 and later
321 # -F: ssh config file : SunSSH 1.0.0 and later
322 # -N: no shell/command : SunSSH 1.0.0 and later
323 # -p: connection port : SunSSH 1.0.0 and later
324 # -v: verbose messages : SunSSH 1.0.0 and later
325 # -vv: increase verbosity : SunSSH 1.0.0 and later
326 # -V: ssh version info : SunSSH 1.0.0 and later
327
328
329 #***************************************************************************
330 # Verify minimum ssh client version
331 #
332 if((($sshid =~ /OpenSSH/) && ($sshvernum < 299)) ||
333 (($sshid =~ /SunSSH/) && ($sshvernum < 100))) {
334 logmsg 'SCP and SFTP tests require OpenSSH 2.9.9 or later';
335 exit 1;
336 }
337
338
339 #***************************************************************************
340 # ssh keygen command line options we actually use and version support
341 #
342 # -C: identity comment : OpenSSH 1.2.1 and later
343 # -f: key filename : OpenSSH 1.2.1 and later
344 # -N: new passphrase : OpenSSH 1.2.1 and later
345 # -q: quiet keygen : OpenSSH 1.2.1 and later
346 # -t: key type : OpenSSH 2.5.0 and later
347 #
348 # -C: identity comment : SunSSH 1.0.0 and later
349 # -f: key filename : SunSSH 1.0.0 and later
350 # -N: new passphrase : SunSSH 1.0.0 and later
351 # -q: quiet keygen : SunSSH 1.0.0 and later
352 # -t: key type : SunSSH 1.0.0 and later
353
354
355 #***************************************************************************
356 # Generate host and client key files for curl's tests
357 #
358 if((! -e $hstprvkeyf) || (! -s $hstprvkeyf) ||
359 (! -e $hstpubkeyf) || (! -s $hstpubkeyf) ||
360 (! -e $cliprvkeyf) || (! -s $cliprvkeyf) ||
361 (! -e $clipubkeyf) || (! -s $clipubkeyf)) {
362 # Make sure all files are gone so ssh-keygen doesn't complain
363 unlink($hstprvkeyf, $hstpubkeyf, $cliprvkeyf, $clipubkeyf);
364 logmsg 'generating host keys...' if($verbose);
365 if(system "\"$sshkeygen\" -q -t rsa -f $hstprvkeyf -C 'curl test server' -N ''") {
366 logmsg 'Could not generate host key';
367 exit 1;
368 }
369 logmsg 'generating client keys...' if($verbose);
370 if(system "\"$sshkeygen\" -q -t rsa -f $cliprvkeyf -C 'curl test client' -N ''") {
371 logmsg 'Could not generate client key';
372 exit 1;
373 }
374 # Make sure that permissions are restricted so openssh doesn't complain
375 system "chmod 600 $hstprvkeyf";
376 system "chmod 600 $cliprvkeyf";
377 }
378
379
380 #***************************************************************************
381 # Convert paths for curl's tests running on Windows with Cygwin/Msys OpenSSH
382 #
383 my $clipubkeyf_config = abs_path("$path/$clipubkeyf");
384 my $hstprvkeyf_config = abs_path("$path/$hstprvkeyf");
385 my $pidfile_config = $pidfile;
386 my $sftpsrv_config = $sftpsrv;
387
388 if ($^O eq 'MSWin32' || $^O eq 'cygwin' || $^O eq 'msys') {
389 # Ensure to use MinGW/Cygwin paths
390 $clipubkeyf_config = pathhelp::build_sys_abs_path($clipubkeyf_config);
391 $hstprvkeyf_config = pathhelp::build_sys_abs_path($hstprvkeyf_config);
392 $pidfile_config = pathhelp::build_sys_abs_path($pidfile_config);
393 $sftpsrv_config = "internal-sftp";
394 }
395 if ($sshdid =~ /OpenSSH-Windows/) {
396 # Ensure to use native Windows paths with OpenSSH for Windows
397 $clipubkeyf_config = pathhelp::sys_native_abs_path($clipubkeyf);
398 $hstprvkeyf_config = pathhelp::sys_native_abs_path($hstprvkeyf);
399 $pidfile_config = pathhelp::sys_native_abs_path($pidfile);
400 $sftpsrv_config = pathhelp::sys_native_abs_path($sftpsrv);
401
402 $sshdconfig = pathhelp::sys_native_abs_path($sshdconfig);
403 $sshconfig = pathhelp::sys_native_abs_path($sshconfig);
404 $sftpconfig = pathhelp::sys_native_abs_path($sftpconfig);
405 }
406
407 #***************************************************************************
408 # ssh daemon configuration file options we might use and version support
409 #
410 # AFSTokenPassing : OpenSSH 1.2.1 and later [1]
411 # AcceptEnv : OpenSSH 3.9.0 and later
412 # AddressFamily : OpenSSH 4.0.0 and later
413 # AllowGroups : OpenSSH 1.2.1 and later
414 # AllowTcpForwarding : OpenSSH 2.3.0 and later
415 # AllowUsers : OpenSSH 1.2.1 and later
416 # AuthorizedKeysFile : OpenSSH 2.9.9 and later
417 # AuthorizedKeysFile2 : OpenSSH 2.9.9 and later
418 # Banner : OpenSSH 2.5.0 and later
419 # ChallengeResponseAuthentication : OpenSSH 2.5.0 and later
420 # Ciphers : OpenSSH 2.1.0 and later [3]
421 # ClientAliveCountMax : OpenSSH 2.9.0 and later
422 # ClientAliveInterval : OpenSSH 2.9.0 and later
423 # Compression : OpenSSH 3.3.0 and later
424 # DenyGroups : OpenSSH 1.2.1 and later
425 # DenyUsers : OpenSSH 1.2.1 and later
426 # ForceCommand : OpenSSH 4.4.0 and later [3]
427 # GatewayPorts : OpenSSH 2.1.0 and later
428 # GSSAPIAuthentication : OpenSSH 3.7.0 and later [1]
429 # GSSAPICleanupCredentials : OpenSSH 3.8.0 and later [1]
430 # GSSAPIKeyExchange : SunSSH 1.0.0 and later [1]
431 # GSSAPIStoreDelegatedCredentials : SunSSH 1.0.0 and later [1]
432 # GSSCleanupCreds : SunSSH 1.0.0 and later [1]
433 # GSSUseSessionCredCache : SunSSH 1.0.0 and later [1]
434 # HostbasedAuthentication : OpenSSH 2.9.0 and later
435 # HostbasedUsesNameFromPacketOnly : OpenSSH 2.9.0 and later
436 # HostKey : OpenSSH 1.2.1 and later
437 # IgnoreRhosts : OpenSSH 1.2.1 and later
438 # IgnoreUserKnownHosts : OpenSSH 1.2.1 and later
439 # KbdInteractiveAuthentication : OpenSSH 2.3.0 and later
440 # KeepAlive : OpenSSH 1.2.1 and later
441 # KerberosAuthentication : OpenSSH 1.2.1 and later [1]
442 # KerberosGetAFSToken : OpenSSH 3.8.0 and later [1]
443 # KerberosOrLocalPasswd : OpenSSH 1.2.1 and later [1]
444 # KerberosTgtPassing : OpenSSH 1.2.1 and later [1]
445 # KerberosTicketCleanup : OpenSSH 1.2.1 and later [1]
446 # KeyRegenerationInterval : OpenSSH 1.2.1 and later
447 # ListenAddress : OpenSSH 1.2.1 and later
448 # LoginGraceTime : OpenSSH 1.2.1 and later
449 # LogLevel : OpenSSH 1.2.1 and later
450 # LookupClientHostnames : SunSSH 1.0.0 and later
451 # MACs : OpenSSH 2.5.0 and later [3]
452 # Match : OpenSSH 4.4.0 and later [3]
453 # MaxAuthTries : OpenSSH 3.9.0 and later
454 # MaxStartups : OpenSSH 2.2.0 and later
455 # PAMAuthenticationViaKbdInt : OpenSSH 2.9.0 and later [2]
456 # PasswordAuthentication : OpenSSH 1.2.1 and later
457 # PermitEmptyPasswords : OpenSSH 1.2.1 and later
458 # PermitOpen : OpenSSH 4.4.0 and later [3]
459 # PermitRootLogin : OpenSSH 1.2.1 and later
460 # PermitTunnel : OpenSSH 4.3.0 and later
461 # PermitUserEnvironment : OpenSSH 3.5.0 and later
462 # PidFile : OpenSSH 2.1.0 and later
463 # Port : OpenSSH 1.2.1 and later
464 # PrintLastLog : OpenSSH 2.9.0 and later
465 # PrintMotd : OpenSSH 1.2.1 and later
466 # Protocol : OpenSSH 2.1.0 and later
467 # PubkeyAuthentication : OpenSSH 2.5.0 and later
468 # RhostsAuthentication : OpenSSH 1.2.1 and later
469 # RhostsRSAAuthentication : OpenSSH 1.2.1 and later
470 # RSAAuthentication : OpenSSH 1.2.1 and later
471 # ServerKeyBits : OpenSSH 1.2.1 and later
472 # SkeyAuthentication : OpenSSH 1.2.1 and later [1]
473 # StrictModes : OpenSSH 1.2.1 and later
474 # Subsystem : OpenSSH 2.2.0 and later
475 # SyslogFacility : OpenSSH 1.2.1 and later
476 # TCPKeepAlive : OpenSSH 3.8.0 and later
477 # UseDNS : OpenSSH 3.7.0 and later
478 # UseLogin : OpenSSH 1.2.1 and later
479 # UsePAM : OpenSSH 3.7.0 and later [1][2]
480 # UsePrivilegeSeparation : OpenSSH 3.2.2 and later
481 # VerifyReverseMapping : OpenSSH 3.1.0 and later
482 # X11DisplayOffset : OpenSSH 1.2.1 and later [3]
483 # X11Forwarding : OpenSSH 1.2.1 and later
484 # X11UseLocalhost : OpenSSH 3.1.0 and later
485 # XAuthLocation : OpenSSH 2.1.1 and later [3]
486 #
487 # [1] Option only available if activated at compile time
488 # [2] Option specific for portable versions
489 # [3] Option not used in our ssh server config file
490
491
492 #***************************************************************************
493 # Initialize sshd config with options actually supported in OpenSSH 2.9.9
494 #
495 logmsg 'generating ssh server config file...' if($verbose);
496 @cfgarr = ();
497 push @cfgarr, '# This is a generated file. Do not edit.';
498 push @cfgarr, "# $sshdverstr sshd configuration file for curl testing";
499 push @cfgarr, '#';
500
501 # AllowUsers and DenyUsers options should use lowercase on Windows
502 # and do not support quotes around values for some unknown reason.
503 if ($sshdid =~ /OpenSSH-Windows/) {
504 my $username_lc = lc $username;
505 push @cfgarr, "DenyUsers !$username_lc";
506 push @cfgarr, "AllowUsers $username_lc";
507 } else {
508 push @cfgarr, "DenyUsers !$username";
509 push @cfgarr, "AllowUsers $username";
510 }
511
512 push @cfgarr, 'DenyGroups';
513 push @cfgarr, 'AllowGroups';
514 push @cfgarr, '#';
515 push @cfgarr, "AuthorizedKeysFile $clipubkeyf_config";
516 push @cfgarr, "AuthorizedKeysFile2 $clipubkeyf_config";
517 push @cfgarr, "HostKey $hstprvkeyf_config";
518 push @cfgarr, "PidFile $pidfile_config";
519 push @cfgarr, '#';
520 push @cfgarr, "Port $port";
521 push @cfgarr, "ListenAddress $listenaddr";
522 push @cfgarr, 'Protocol 2';
523 push @cfgarr, '#';
524 push @cfgarr, 'AllowTcpForwarding yes';
525 push @cfgarr, 'Banner none';
526 push @cfgarr, 'ChallengeResponseAuthentication no';
527 push @cfgarr, 'ClientAliveCountMax 3';
528 push @cfgarr, 'ClientAliveInterval 0';
529 push @cfgarr, 'GatewayPorts no';
530 push @cfgarr, 'HostbasedAuthentication no';
531 push @cfgarr, 'HostbasedUsesNameFromPacketOnly no';
532 push @cfgarr, 'IgnoreRhosts yes';
533 push @cfgarr, 'IgnoreUserKnownHosts yes';
534 push @cfgarr, 'KeyRegenerationInterval 0';
535 push @cfgarr, 'LoginGraceTime 30';
536 push @cfgarr, "LogLevel $loglevel";
537 push @cfgarr, 'MaxStartups 5';
538 push @cfgarr, 'PasswordAuthentication no';
539 push @cfgarr, 'PermitEmptyPasswords no';
540 push @cfgarr, 'PermitRootLogin no';
541 push @cfgarr, 'PrintLastLog no';
542 push @cfgarr, 'PrintMotd no';
543 push @cfgarr, 'PubkeyAuthentication yes';
544 push @cfgarr, 'RhostsRSAAuthentication no';
545 push @cfgarr, 'RSAAuthentication no';
546 push @cfgarr, 'ServerKeyBits 768';
547 push @cfgarr, 'StrictModes no';
548 push @cfgarr, "Subsystem sftp \"$sftpsrv_config\"";
549 push @cfgarr, 'SyslogFacility AUTH';
550 push @cfgarr, 'UseLogin no';
551 push @cfgarr, 'X11Forwarding no';
552 push @cfgarr, '#';
553
554
555 #***************************************************************************
556 # Write out initial sshd configuration file for curl's tests
557 #
558 $error = dump_array($sshdconfig, @cfgarr);
559 if($error) {
560 logmsg $error;
561 exit 1;
562 }
563
564
565 #***************************************************************************
566 # Verifies at run time if sshd supports a given configuration file option
567 #
568 sub sshd_supports_opt {
569 my ($option, $value) = @_;
570 my $err;
571 #
572 if((($sshdid =~ /OpenSSH/) && ($sshdvernum >= 310)) ||
573 ($sshdid =~ /SunSSH/)) {
574 # ssh daemon supports command line options -t -f and -o
575 $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/,
576 qx("$sshd" -t -f $sshdconfig -o "$option=$value" 2>&1);
577 return !$err;
578 }
579 if(($sshdid =~ /OpenSSH/) && ($sshdvernum >= 299)) {
580 # ssh daemon supports command line options -t and -f
581 $err = dump_array($sshdconfig, (@cfgarr, "$option $value"));
582 if($err) {
583 logmsg $err;
584 return 0;
585 }
586 $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/,
587 qx("$sshd" -t -f $sshdconfig 2>&1);
588 unlink $sshdconfig;
589 return !$err;
590 }
591 return 0;
592 }
593
594
595 #***************************************************************************
596 # Kerberos Authentication support may have not been built into sshd
597 #
598 if(sshd_supports_opt('KerberosAuthentication','no')) {
599 push @cfgarr, 'KerberosAuthentication no';
600 }
601 if(sshd_supports_opt('KerberosGetAFSToken','no')) {
602 push @cfgarr, 'KerberosGetAFSToken no';
603 }
604 if(sshd_supports_opt('KerberosOrLocalPasswd','no')) {
605 push @cfgarr, 'KerberosOrLocalPasswd no';
606 }
607 if(sshd_supports_opt('KerberosTgtPassing','no')) {
608 push @cfgarr, 'KerberosTgtPassing no';
609 }
610 if(sshd_supports_opt('KerberosTicketCleanup','yes')) {
611 push @cfgarr, 'KerberosTicketCleanup yes';
612 }
613
614
615 #***************************************************************************
616 # Andrew File System support may have not been built into sshd
617 #
618 if(sshd_supports_opt('AFSTokenPassing','no')) {
619 push @cfgarr, 'AFSTokenPassing no';
620 }
621
622
623 #***************************************************************************
624 # S/Key authentication support may have not been built into sshd
625 #
626 if(sshd_supports_opt('SkeyAuthentication','no')) {
627 push @cfgarr, 'SkeyAuthentication no';
628 }
629
630
631 #***************************************************************************
632 # GSSAPI Authentication support may have not been built into sshd
633 #
634 my $sshd_builtwith_GSSAPI;
635 if(sshd_supports_opt('GSSAPIAuthentication','no')) {
636 push @cfgarr, 'GSSAPIAuthentication no';
637 $sshd_builtwith_GSSAPI = 1;
638 }
639 if(sshd_supports_opt('GSSAPICleanupCredentials','yes')) {
640 push @cfgarr, 'GSSAPICleanupCredentials yes';
641 }
642 if(sshd_supports_opt('GSSAPIKeyExchange','no')) {
643 push @cfgarr, 'GSSAPIKeyExchange no';
644 }
645 if(sshd_supports_opt('GSSAPIStoreDelegatedCredentials','no')) {
646 push @cfgarr, 'GSSAPIStoreDelegatedCredentials no';
647 }
648 if(sshd_supports_opt('GSSCleanupCreds','yes')) {
649 push @cfgarr, 'GSSCleanupCreds yes';
650 }
651 if(sshd_supports_opt('GSSUseSessionCredCache','no')) {
652 push @cfgarr, 'GSSUseSessionCredCache no';
653 }
654 push @cfgarr, '#';
655
656
657 #***************************************************************************
658 # Options that might be supported or not in sshd OpenSSH 2.9.9 and later
659 #
660 if(sshd_supports_opt('AcceptEnv','')) {
661 push @cfgarr, 'AcceptEnv';
662 }
663 if(sshd_supports_opt('AddressFamily','any')) {
664 # Address family must be specified before ListenAddress
665 splice @cfgarr, 14, 0, 'AddressFamily any';
666 }
667 if(sshd_supports_opt('Compression','no')) {
668 push @cfgarr, 'Compression no';
669 }
670 if(sshd_supports_opt('KbdInteractiveAuthentication','no')) {
671 push @cfgarr, 'KbdInteractiveAuthentication no';
672 }
673 if(sshd_supports_opt('KeepAlive','no')) {
674 push @cfgarr, 'KeepAlive no';
675 }
676 if(sshd_supports_opt('LookupClientHostnames','no')) {
677 push @cfgarr, 'LookupClientHostnames no';
678 }
679 if(sshd_supports_opt('MaxAuthTries','10')) {
680 push @cfgarr, 'MaxAuthTries 10';
681 }
682 if(sshd_supports_opt('PAMAuthenticationViaKbdInt','no')) {
683 push @cfgarr, 'PAMAuthenticationViaKbdInt no';
684 }
685 if(sshd_supports_opt('PermitTunnel','no')) {
686 push @cfgarr, 'PermitTunnel no';
687 }
688 if(sshd_supports_opt('PermitUserEnvironment','no')) {
689 push @cfgarr, 'PermitUserEnvironment no';
690 }
691 if(sshd_supports_opt('RhostsAuthentication','no')) {
692 push @cfgarr, 'RhostsAuthentication no';
693 }
694 if(sshd_supports_opt('TCPKeepAlive','no')) {
695 push @cfgarr, 'TCPKeepAlive no';
696 }
697 if(sshd_supports_opt('UseDNS','no')) {
698 push @cfgarr, 'UseDNS no';
699 }
700 if(sshd_supports_opt('UsePAM','no')) {
701 push @cfgarr, 'UsePAM no';
702 }
703
704 if($sshdid =~ /OpenSSH/) {
705 # http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6492415
706 if(sshd_supports_opt('UsePrivilegeSeparation','no')) {
707 push @cfgarr, 'UsePrivilegeSeparation no';
708 }
709 }
710
711 if(sshd_supports_opt('VerifyReverseMapping','no')) {
712 push @cfgarr, 'VerifyReverseMapping no';
713 }
714 if(sshd_supports_opt('X11UseLocalhost','yes')) {
715 push @cfgarr, 'X11UseLocalhost yes';
716 }
717 push @cfgarr, '#';
718
719
720 #***************************************************************************
721 # Write out resulting sshd configuration file for curl's tests
722 #
723 $error = dump_array($sshdconfig, @cfgarr);
724 if($error) {
725 logmsg $error;
726 exit 1;
727 }
728
729
730 #***************************************************************************
731 # Verify that sshd actually supports our generated configuration file
732 #
733 if(system "\"$sshd\" -t -f $sshdconfig > $sshdlog 2>&1") {
734 logmsg "sshd configuration file $sshdconfig failed verification";
735 display_sshdlog();
736 display_sshdconfig();
737 exit 1;
738 }
739
740
741 #***************************************************************************
742 # Generate ssh client host key database file for curl's tests
743 #
744 if((! -e $knownhosts) || (! -s $knownhosts)) {
745 logmsg 'generating ssh client known hosts file...' if($verbose);
746 unlink($knownhosts);
747 if(open(RSAKEYFILE, "<$hstpubkeyf")) {
748 my @rsahostkey = do { local $/ = ' '; <RSAKEYFILE> };
749 if(close(RSAKEYFILE)) {
750 if(open(KNOWNHOSTS, ">$knownhosts")) {
751 print KNOWNHOSTS "$listenaddr ssh-rsa $rsahostkey[1]\n";
752 if(!close(KNOWNHOSTS)) {
753 $error = "Error: cannot close file $knownhosts";
754 }
755 }
756 else {
757 $error = "Error: cannot write file $knownhosts";
758 }
759 }
760 else {
761 $error = "Error: cannot close file $hstpubkeyf";
762 }
763 }
764 else {
765 $error = "Error: cannot read file $hstpubkeyf";
766 }
767 if($error) {
768 logmsg $error;
769 exit 1;
770 }
771 }
772
773
774 #***************************************************************************
775 # Convert paths for curl's tests running on Windows using Cygwin OpenSSH
776 #
777 my $identity_config = abs_path("$path/$identity");
778 my $knownhosts_config = abs_path("$path/$knownhosts");
779
780 if ($^O eq 'MSWin32' || $^O eq 'cygwin' || $^O eq 'msys') {
781 # Ensure to use MinGW/Cygwin paths
782 $identity_config = pathhelp::build_sys_abs_path($identity_config);
783 $knownhosts_config = pathhelp::build_sys_abs_path($knownhosts_config);
784 }
785 if ($sshdid =~ /OpenSSH-Windows/) {
786 # Ensure to use native Windows paths with OpenSSH for Windows
787 $identity_config = pathhelp::sys_native_abs_path($identity);
788 $knownhosts_config = pathhelp::sys_native_abs_path($knownhosts);
789 }
790
791 #***************************************************************************
792 # ssh client configuration file options we might use and version support
793 #
794 # AddressFamily : OpenSSH 3.7.0 and later
795 # BatchMode : OpenSSH 1.2.1 and later
796 # BindAddress : OpenSSH 2.9.9 and later
797 # ChallengeResponseAuthentication : OpenSSH 2.5.0 and later
798 # CheckHostIP : OpenSSH 1.2.1 and later
799 # Cipher : OpenSSH 1.2.1 and later [3]
800 # Ciphers : OpenSSH 2.1.0 and later [3]
801 # ClearAllForwardings : OpenSSH 2.9.9 and later
802 # Compression : OpenSSH 1.2.1 and later
803 # CompressionLevel : OpenSSH 1.2.1 and later [3]
804 # ConnectionAttempts : OpenSSH 1.2.1 and later
805 # ConnectTimeout : OpenSSH 3.7.0 and later
806 # ControlMaster : OpenSSH 3.9.0 and later
807 # ControlPath : OpenSSH 3.9.0 and later
808 # DisableBanner : SunSSH 1.2.0 and later
809 # DynamicForward : OpenSSH 2.9.0 and later
810 # EnableSSHKeysign : OpenSSH 3.6.0 and later
811 # EscapeChar : OpenSSH 1.2.1 and later [3]
812 # ExitOnForwardFailure : OpenSSH 4.4.0 and later
813 # ForwardAgent : OpenSSH 1.2.1 and later
814 # ForwardX11 : OpenSSH 1.2.1 and later
815 # ForwardX11Trusted : OpenSSH 3.8.0 and later
816 # GatewayPorts : OpenSSH 1.2.1 and later
817 # GlobalKnownHostsFile : OpenSSH 1.2.1 and later
818 # GSSAPIAuthentication : OpenSSH 3.7.0 and later [1]
819 # GSSAPIDelegateCredentials : OpenSSH 3.7.0 and later [1]
820 # HashKnownHosts : OpenSSH 4.0.0 and later
821 # Host : OpenSSH 1.2.1 and later
822 # HostbasedAuthentication : OpenSSH 2.9.0 and later
823 # HostKeyAlgorithms : OpenSSH 2.9.0 and later [3]
824 # HostKeyAlias : OpenSSH 2.5.0 and later [3]
825 # HostName : OpenSSH 1.2.1 and later
826 # IdentitiesOnly : OpenSSH 3.9.0 and later
827 # IdentityFile : OpenSSH 1.2.1 and later
828 # IgnoreIfUnknown : SunSSH 1.2.0 and later
829 # KeepAlive : OpenSSH 1.2.1 and later
830 # KbdInteractiveAuthentication : OpenSSH 2.3.0 and later
831 # KbdInteractiveDevices : OpenSSH 2.3.0 and later [3]
832 # LocalCommand : OpenSSH 4.3.0 and later [3]
833 # LocalForward : OpenSSH 1.2.1 and later [3]
834 # LogLevel : OpenSSH 1.2.1 and later
835 # MACs : OpenSSH 2.5.0 and later [3]
836 # NoHostAuthenticationForLocalhost : OpenSSH 3.0.0 and later
837 # NumberOfPasswordPrompts : OpenSSH 1.2.1 and later
838 # PasswordAuthentication : OpenSSH 1.2.1 and later
839 # PermitLocalCommand : OpenSSH 4.3.0 and later
840 # Port : OpenSSH 1.2.1 and later
841 # PreferredAuthentications : OpenSSH 2.5.2 and later
842 # Protocol : OpenSSH 2.1.0 and later
843 # ProxyCommand : OpenSSH 1.2.1 and later [3]
844 # PubkeyAuthentication : OpenSSH 2.5.0 and later
845 # RekeyLimit : OpenSSH 3.7.0 and later
846 # RemoteForward : OpenSSH 1.2.1 and later [3]
847 # RhostsRSAAuthentication : OpenSSH 1.2.1 and later
848 # RSAAuthentication : OpenSSH 1.2.1 and later
849 # SendEnv : OpenSSH 3.9.0 and later
850 # ServerAliveCountMax : OpenSSH 3.8.0 and later
851 # ServerAliveInterval : OpenSSH 3.8.0 and later
852 # SmartcardDevice : OpenSSH 2.9.9 and later [1][3]
853 # StrictHostKeyChecking : OpenSSH 1.2.1 and later
854 # TCPKeepAlive : OpenSSH 3.8.0 and later
855 # Tunnel : OpenSSH 4.3.0 and later
856 # TunnelDevice : OpenSSH 4.3.0 and later [3]
857 # UsePAM : OpenSSH 3.7.0 and later [1][2][3]
858 # UsePrivilegedPort : OpenSSH 1.2.1 and later
859 # User : OpenSSH 1.2.1 and later
860 # UserKnownHostsFile : OpenSSH 1.2.1 and later
861 # VerifyHostKeyDNS : OpenSSH 3.8.0 and later
862 # XAuthLocation : OpenSSH 2.1.1 and later [3]
863 #
864 # [1] Option only available if activated at compile time
865 # [2] Option specific for portable versions
866 # [3] Option not used in our ssh client config file
867
868
869 #***************************************************************************
870 # Initialize ssh config with options actually supported in OpenSSH 2.9.9
871 #
872 logmsg 'generating ssh client config file...' if($verbose);
873 @cfgarr = ();
874 push @cfgarr, '# This is a generated file. Do not edit.';
875 push @cfgarr, "# $sshverstr ssh client configuration file for curl testing";
876 push @cfgarr, '#';
877 push @cfgarr, 'Host *';
878 push @cfgarr, '#';
879 push @cfgarr, "Port $port";
880 push @cfgarr, "HostName $listenaddr";
881 push @cfgarr, "User $username";
882 push @cfgarr, 'Protocol 2';
883 push @cfgarr, '#';
884
885 # BindAddress option is not supported by OpenSSH for Windows
886 if (!($sshdid =~ /OpenSSH-Windows/)) {
887 push @cfgarr, "BindAddress $listenaddr";
888 }
889
890 push @cfgarr, '#';
891 push @cfgarr, "IdentityFile $identity_config";
892 push @cfgarr, "UserKnownHostsFile $knownhosts_config";
893 push @cfgarr, '#';
894 push @cfgarr, 'BatchMode yes';
895 push @cfgarr, 'ChallengeResponseAuthentication no';
896 push @cfgarr, 'CheckHostIP no';
897 push @cfgarr, 'ClearAllForwardings no';
898 push @cfgarr, 'Compression no';
899 push @cfgarr, 'ConnectionAttempts 3';
900 push @cfgarr, 'ForwardAgent no';
901 push @cfgarr, 'ForwardX11 no';
902 push @cfgarr, 'GatewayPorts no';
903 push @cfgarr, 'GlobalKnownHostsFile /dev/null';
904 push @cfgarr, 'HostbasedAuthentication no';
905 push @cfgarr, 'KbdInteractiveAuthentication no';
906 push @cfgarr, "LogLevel $loglevel";
907 push @cfgarr, 'NumberOfPasswordPrompts 0';
908 push @cfgarr, 'PasswordAuthentication no';
909 push @cfgarr, 'PreferredAuthentications publickey';
910 push @cfgarr, 'PubkeyAuthentication yes';
911
912 # RSA authentication options are not supported by OpenSSH for Windows
913 if (!($sshdid =~ /OpenSSH-Windows/)) {
914 push @cfgarr, 'RhostsRSAAuthentication no';
915 push @cfgarr, 'RSAAuthentication no';
916 }
917
918 # Disabled StrictHostKeyChecking since it makes the tests fail on my
919 # OpenSSH_6.0p1 on Debian Linux / Daniel
920 push @cfgarr, 'StrictHostKeyChecking no';
921 push @cfgarr, 'UsePrivilegedPort no';
922 push @cfgarr, '#';
923
924
925 #***************************************************************************
926 # Options supported in ssh client newer than OpenSSH 2.9.9
927 #
928
929 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) {
930 push @cfgarr, 'AddressFamily any';
931 }
932
933 if((($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) ||
934 (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
935 push @cfgarr, 'ConnectTimeout 30';
936 }
937
938 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) {
939 push @cfgarr, 'ControlMaster no';
940 }
941
942 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 420)) {
943 push @cfgarr, 'ControlPath none';
944 }
945
946 if(($sshid =~ /SunSSH/) && ($sshvernum >= 120)) {
947 push @cfgarr, 'DisableBanner yes';
948 }
949
950 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 360)) {
951 push @cfgarr, 'EnableSSHKeysign no';
952 }
953
954 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 440)) {
955 push @cfgarr, 'ExitOnForwardFailure yes';
956 }
957
958 if((($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) ||
959 (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
960 push @cfgarr, 'ForwardX11Trusted no';
961 }
962
963 if(($sshd_builtwith_GSSAPI) && ($sshdid eq $sshid) &&
964 ($sshdvernum == $sshvernum)) {
965 push @cfgarr, 'GSSAPIAuthentication no';
966 push @cfgarr, 'GSSAPIDelegateCredentials no';
967 if($sshid =~ /SunSSH/) {
968 push @cfgarr, 'GSSAPIKeyExchange no';
969 }
970 }
971
972 if((($sshid =~ /OpenSSH/) && ($sshvernum >= 400)) ||
973 (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
974 push @cfgarr, 'HashKnownHosts no';
975 }
976
977 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) {
978 push @cfgarr, 'IdentitiesOnly yes';
979 }
980
981 if(($sshid =~ /SunSSH/) && ($sshvernum >= 120)) {
982 push @cfgarr, 'IgnoreIfUnknown no';
983 }
984
985 if((($sshid =~ /OpenSSH/) && ($sshvernum < 380)) ||
986 ($sshid =~ /SunSSH/)) {
987 push @cfgarr, 'KeepAlive no';
988 }
989
990 if((($sshid =~ /OpenSSH/) && ($sshvernum >= 300)) ||
991 ($sshid =~ /SunSSH/)) {
992 push @cfgarr, 'NoHostAuthenticationForLocalhost no';
993 }
994
995 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 430)) {
996 push @cfgarr, 'PermitLocalCommand no';
997 }
998
999 if((($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) ||
1000 (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
1001 push @cfgarr, 'RekeyLimit 1G';
1002 }
1003
1004 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) {
1005 push @cfgarr, 'SendEnv';
1006 }
1007
1008 if((($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) ||
1009 (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
1010 push @cfgarr, 'ServerAliveCountMax 3';
1011 push @cfgarr, 'ServerAliveInterval 0';
1012 }
1013
1014 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) {
1015 push @cfgarr, 'TCPKeepAlive no';
1016 }
1017
1018 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 430)) {
1019 push @cfgarr, 'Tunnel no';
1020 }
1021
1022 if(($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) {
1023 push @cfgarr, 'VerifyHostKeyDNS no';
1024 }
1025
1026 push @cfgarr, '#';
1027
1028
1029 #***************************************************************************
1030 # Write out resulting ssh client configuration file for curl's tests
1031 #
1032 $error = dump_array($sshconfig, @cfgarr);
1033 if($error) {
1034 logmsg $error;
1035 exit 1;
1036 }
1037
1038
1039 #***************************************************************************
1040 # Initialize client sftp config with options actually supported.
1041 #
1042 logmsg 'generating sftp client config file...' if($verbose);
1043 splice @cfgarr, 1, 1, "# $sshverstr sftp client configuration file for curl testing";
1044 #
1045 for(my $i = scalar(@cfgarr) - 1; $i > 0; $i--) {
1046 if($cfgarr[$i] =~ /^DynamicForward/) {
1047 splice @cfgarr, $i, 1;
1048 next;
1049 }
1050 if($cfgarr[$i] =~ /^ClearAllForwardings/) {
1051 splice @cfgarr, $i, 1, "ClearAllForwardings yes";
1052 next;
1053 }
1054 }
1055
1056
1057 #***************************************************************************
1058 # Write out resulting sftp client configuration file for curl's tests
1059 #
1060 $error = dump_array($sftpconfig, @cfgarr);
1061 if($error) {
1062 logmsg $error;
1063 exit 1;
1064 }
1065 @cfgarr = ();
1066
1067
1068 #***************************************************************************
1069 # Generate client sftp commands batch file for sftp server verification
1070 #
1071 logmsg 'generating sftp client commands file...' if($verbose);
1072 push @cfgarr, 'pwd';
1073 push @cfgarr, 'quit';
1074 $error = dump_array($sftpcmds, @cfgarr);
1075 if($error) {
1076 logmsg $error;
1077 exit 1;
1078 }
1079 @cfgarr = ();
1080
1081
1082 #***************************************************************************
1083 # Start the ssh server daemon without forking it
1084 #
1085 logmsg "SCP/SFTP server listening on port $port" if($verbose);
1086 my $rc = system "\"$sshd\" -e -D -f $sshdconfig > $sshdlog 2>&1";
1087 if($rc == -1) {
1088 logmsg "\"$sshd\" failed with: $!";
1089 }
1090 elsif($rc & 127) {
1091 logmsg sprintf("\"$sshd\" died with signal %d, and %s coredump",
1092 ($rc & 127), ($rc & 128)?'a':'no');
1093 }
1094 elsif($verbose && ($rc >> 8)) {
1095 logmsg sprintf("\"$sshd\" exited with %d", $rc >> 8);
1096 }
1097
1098
1099 #***************************************************************************
1100 # Clean up once the server has stopped
1101 #
1102 unlink($hstprvkeyf, $hstpubkeyf, $cliprvkeyf, $clipubkeyf, $knownhosts);
1103 unlink($sshdconfig, $sshconfig, $sftpconfig);
1104
1105
1106 exit 0;