| 1 |
Long: ftp-port |
| 2 |
Arg: <address> |
| 3 |
Help: Use PORT instead of PASV |
| 4 |
Short: P |
| 5 |
Protocols: FTP |
| 6 |
See-also: ftp-pasv disable-eprt |
| 7 |
--- |
| 8 |
Reverses the default initiator/listener roles when connecting with FTP. This |
| 9 |
option makes curl use active mode. curl then tells the server to connect back |
| 10 |
to the client's specified address and port, while passive mode asks the server |
| 11 |
to setup an IP address and port for it to connect to. <address> should be one |
| 12 |
of: |
| 13 |
.RS |
| 14 |
.IP interface |
| 15 |
e.g. "eth0" to specify which interface's IP address you want to use (Unix only) |
| 16 |
.IP "IP address" |
| 17 |
e.g. "192.168.10.1" to specify the exact IP address |
| 18 |
.IP "host name" |
| 19 |
e.g. "my.host.domain" to specify the machine |
| 20 |
.IP "-" |
| 21 |
make curl pick the same IP address that is already used for the control |
| 22 |
connection |
| 23 |
.RE |
| 24 |
|
| 25 |
If this option is used several times, the last one will be used. Disable the |
| 26 |
use of PORT with --ftp-pasv. Disable the attempt to use the EPRT command |
| 27 |
instead of PORT by using --disable-eprt. EPRT is really PORT++. |
| 28 |
|
| 29 |
Since 7.19.5, you can append \&":[start]-[end]\&" to the right of the address, |
| 30 |
to tell curl what TCP port range to use. That means you specify a port range, |
| 31 |
from a lower to a higher number. A single number works as well, but do note |
| 32 |
that it increases the risk of failure since the port may not be available. |