| 1 |
# MIC SCIF/DAPL RDMA proxy server configuration file |
| 2 |
# |
| 3 |
# Entry format is: |
| 4 |
# name value |
| 5 |
|
| 6 |
# log_file: |
| 7 |
# Specifies the location of the MPXYD service output. The log file is used to |
| 8 |
# assist with MPXYD service debugging and troubleshooting. The log_file can |
| 9 |
# be set to 'stdout', 'stderr', or the name of a file. |
| 10 |
# Examples: |
| 11 |
# log_file stdout |
| 12 |
# log_file stderr |
| 13 |
# log_file /var/log/mpxyd.log |
| 14 |
|
| 15 |
log_file /var/log/mpxyd.log |
| 16 |
|
| 17 |
# log_level: |
| 18 |
# Indicates the amount of detailed data written to the log file. Log levels |
| 19 |
# are bit mapped as follow: 0xf for full verbose |
| 20 |
# 0x0 - errors always reported |
| 21 |
# 0x1 - warnings |
| 22 |
# 0x2 - cm operations |
| 23 |
# 0x4 - data operations |
| 24 |
# 0x8 - info |
| 25 |
# 0x10 - perf |
| 26 |
# 0x20 - threads |
| 27 |
# 0x40 - verbose |
| 28 |
|
| 29 |
log_level 0 |
| 30 |
|
| 31 |
# lock_file: |
| 32 |
# Specifies the location of the MPXYD lock file used to ensure that only a |
| 33 |
# single instance of MPXYD is running. |
| 34 |
|
| 35 |
lock_file /var/run/mpxyd.pid |
| 36 |
|
| 37 |
# scif_port_id: |
| 38 |
# SCIF port number that the server listens on. |
| 39 |
# If this value is changed, then a corresponding change is required for |
| 40 |
# client MIC DAPL provider. Default is SCIF_OFED_PORT_8 (i.e. 68) |
| 41 |
|
| 42 |
scif_port_id 68 |
| 43 |
|
| 44 |
# scif_listen_qlen: |
| 45 |
# The queue length for the server side scif_listen() call. It affects how |
| 46 |
# many clients can connect to the server simultaneously. Default is 240. |
| 47 |
|
| 48 |
scif_listen_qlen 240 |
| 49 |
|
| 50 |
# mcm_affinity: |
| 51 |
# Specifies CPU affinity and binding level used for mpxyd threads |
| 52 |
# If 0, normal O/S scheduling is used for all threads. |
| 53 |
# If 1, CPU affinity is set for OP,CM,TX and RX threads, multi core binding. |
| 54 |
# If 2, CPU affinity is set for OP,CM,TX and RX threads, single core binding. |
| 55 |
# |
| 56 |
# Note: mcm_affinity = 2, best performance, op thread continously polls |
| 57 |
# when devices are active/open. |
| 58 |
# |
| 59 |
# The default is 1 |
| 60 |
|
| 61 |
mcm_affinity 1 |
| 62 |
|
| 63 |
# mcm_op_poll: |
| 64 |
# For the OP thread. Use FD wake or use pollong for next OP |
| 65 |
# If 0, FD wake up will be used. |
| 66 |
# If 1, use polling for the next OP. |
| 67 |
# |
| 68 |
# The default is 1 |
| 69 |
|
| 70 |
mcm_op_poll 1 |
| 71 |
|
| 72 |
# mcm_affinity_base_mic: |
| 73 |
# Specifies a hard binding for CPU id base value used for affinity support of |
| 74 |
# mpxyd data proxy threads. Default = 0, which specifies use of |
| 75 |
# dynamic affinity binding based on adapter locality. For specific bindings, |
| 76 |
# set to CPU id value desired. For example, mcm_affinity_base_mic = 8, |
| 77 |
# would bind proxy threads across CPU 8,9,10, and 11 |
| 78 |
# |
| 79 |
# NOTE: if mcm_affinity = 2, mcm_affinity_base_mic specifies single core |
| 80 |
# id for ALL threads across all MIC adapters. If specifying a single core_id it |
| 81 |
# is best to specify a CPU located in the remote socket, away from IB adapter. |
| 82 |
# If mcm_affinity = 2 && mcm_affinity_base_mic = 0, then a single core per MIC adapter |
| 83 |
# is configured based on locality of MIC adapter. See mpxyd.log for resulting bindings. |
| 84 |
# |
| 85 |
# The default is 0 (best performance) |
| 86 |
|
| 87 |
mcm_affinity_base_mic 0 |
| 88 |
|
| 89 |
# mcm_depth: |
| 90 |
# Specifies the number of request queue entries available for CM messages. |
| 91 |
# A larger depth consumes more system resources, 256 * mcm_depth * ib devices |
| 92 |
|
| 93 |
mcm_depth 500 |
| 94 |
|
| 95 |
# mcm_rw_signal_rate: |
| 96 |
# mcm_rr_signal_rate: |
| 97 |
# mcm_rr_max_pending: |
| 98 |
# Specifies the number of RDMA write/read segments posted before signaling for completions. |
| 99 |
# Larger the value reduces interrupts but could increase reserve times on buffer resources. |
| 100 |
# Default = 1 for signaling, 40 for RDMA READ's outstanding |
| 101 |
|
| 102 |
mcm_rw_signal_rate 1 |
| 103 |
mcm_rr_signal_rate 1 |
| 104 |
mcm_rr_max_pending 40 |
| 105 |
|
| 106 |
# max_message_mb: |
| 107 |
# Specifies the maximum message size. The default is 16 (MB). |
| 108 |
|
| 109 |
max_message_mb 16 |
| 110 |
|
| 111 |
# buffer_pool_shared: |
| 112 |
# Specifies if the pre-allocated and pinned buffer is shared between |
| 113 |
# connections from the same client, or is private to each connection. |
| 114 |
|
| 115 |
buffer_pool_shared 1 |
| 116 |
|
| 117 |
# buffer_pool_mb: |
| 118 |
# Specifies the amount of memory pre-allocated and pinned for SCIF to uDAPL |
| 119 |
# RDMA proxy services. Per client or per connection depending on the setting |
| 120 |
# of "buffer_pool_shared". Recommend to increase the size if shared. |
| 121 |
|
| 122 |
buffer_pool_mb 32 |
| 123 |
|
| 124 |
# buffer_segment_size: |
| 125 |
# Specifies the segment size of large DMA transfers. Default is 128KB. |
| 126 |
# The size must be a multiple of 4096. |
| 127 |
|
| 128 |
buffer_segment_size 131072 |
| 129 |
|
| 130 |
# buffer_alignment: |
| 131 |
# Specifies the alignment of the RDMA buffer. Default is 64 bytes. |
| 132 |
|
| 133 |
buffer_alignment 64 |
| 134 |
|
| 135 |
# buffer_inline_threshold: |
| 136 |
# Specifies the max IO size for scif_recv inline before switch |
| 137 |
# to scif_readfrom DMA. Default is 256 bytes. |
| 138 |
|
| 139 |
buffer_inline_threshold 256 |
| 140 |
|
| 141 |
# proxy_tx_depth: |
| 142 |
# Specifies the work request queue depth for the outbound proxy service |
| 143 |
# Default is 1024 work requests. |
| 144 |
|
| 145 |
proxy_tx_depth 512 |
| 146 |
|
| 147 |
# proxy_rx_depth: |
| 148 |
# Specifies the work request queue depth for the outbound proxy service |
| 149 |
# Default is 1024 work requests. |
| 150 |
|
| 151 |
proxy_rx_depth 512 |
| 152 |
|
| 153 |
# CM connect request timeout ms: |
| 154 |
# Specifies the amout of time a request waits for reply before retry. |
| 155 |
# Default is 2000 ms |
| 156 |
|
| 157 |
mcm_req_timeout_ms 4000 |
| 158 |
|
| 159 |
# CM connect reply timeout ms: |
| 160 |
# Specifies the amout of time a reply waits for RTU before retry. |
| 161 |
# Default is 1000 ms |
| 162 |
|
| 163 |
mcm_rep_timeout_ms 2000 |
| 164 |
|
| 165 |
# CM retry count |
| 166 |
# Specifies the amount of retries for CM messages expecting replies. |
| 167 |
# Default is 10. |
| 168 |
|
| 169 |
mcm_retry_count 10 |
| 170 |
|
| 171 |
# mcm_perf_profile: |
| 172 |
# 1 or 0, specifies if performance profiling is enabled/disabled for RDMA operations |
| 173 |
# Default is 0, disabled |
| 174 |
# |
| 175 |
|
| 176 |
mcm_perf_profile 0 |
| 177 |
|
| 178 |
# mcm_eager_completion: |
| 179 |
# complete and signal write request after scif_readfrom has moved all data, otherwise wait for IB completions. |
| 180 |
# Default is enabled. |
| 181 |
|
| 182 |
mcm_eager_completion 1 |
| 183 |
|
| 184 |
# mcm_counters |
| 185 |
# log and print device CM, DTO, and event counters. Output any non-zero results at device close. |
| 186 |
# Default is disabled. |
| 187 |
|
| 188 |
mcm_counters 0 |
| 189 |
|
| 190 |
# mcm_proxy_in |
| 191 |
# Override for proxy-in services. If disabled, mpxyd will fallback to previous version of proxy-out only. |
| 192 |
# Default is enabled. |
| 193 |
|
| 194 |
mcm_proxy_in 1 |
| 195 |
|
| 196 |
|
| 197 |
|