| 1 |
package Dahdi::Config::Gen::System; |
| 2 |
use strict; |
| 3 |
|
| 4 |
use Dahdi::Config::Gen qw(is_true); |
| 5 |
|
| 6 |
sub new($$$) { |
| 7 |
my $pack = shift || die; |
| 8 |
my $gconfig = shift || die; |
| 9 |
my $genopts = shift || die; |
| 10 |
my $file = $ENV{DAHDI_CONF_FILE} || "/etc/dahdi/system.conf"; |
| 11 |
my $self = { |
| 12 |
FILE => $file, |
| 13 |
GCONFIG => $gconfig, |
| 14 |
GENOPTS => $genopts, |
| 15 |
}; |
| 16 |
bless $self, $pack; |
| 17 |
return $self; |
| 18 |
} |
| 19 |
|
| 20 |
my $bri_te_last_timing = 1; |
| 21 |
|
| 22 |
sub print_echo_can($$) { |
| 23 |
my $gconfig = shift || die; |
| 24 |
my $chans = shift || die; # channel or range of channels. |
| 25 |
my $echo_can = $gconfig->{'echo_can'}; |
| 26 |
return if !defined($echo_can) || $echo_can eq 'none'; |
| 27 |
|
| 28 |
print "echocanceller=$echo_can,$chans\n"; |
| 29 |
} |
| 30 |
|
| 31 |
sub gen_t1_cas($$) { |
| 32 |
my $self = shift || die; |
| 33 |
my $gconfig = shift || die; |
| 34 |
my $parameters = $gconfig->{PARAMETERS} || die; |
| 35 |
my $genconf_file = $parameters->{GENCONF_FILE} || die; |
| 36 |
my $span = shift || die; |
| 37 |
my $num = $span->num() || die; |
| 38 |
my $proto = $span->proto || die; |
| 39 |
die "Generate configuration for '$proto' is not possible. Maybe you meant R2?" |
| 40 |
unless $proto eq 'T1'; |
| 41 |
my $pri_connection_type = $gconfig->{pri_connection_type} || die; |
| 42 |
die "Span #$num is analog" unless $span->is_digital(); |
| 43 |
die "Span #$num is not CAS" unless $span->is_pri && $pri_connection_type eq 'CAS'; |
| 44 |
my $termtype = $span->termtype() || die "$0: Span #$num -- unkown termtype [NT/TE]\n"; |
| 45 |
my $timing; |
| 46 |
my $lbo = 0; |
| 47 |
my $framing = $gconfig->{tdm_framing}; |
| 48 |
if(!defined $framing) { |
| 49 |
$framing = 'esf'; |
| 50 |
} elsif($framing ne 'esf' && $framing ne 'd4') { |
| 51 |
die "T1-CAS valid framing is only 'esf' or 'd4'. Not '$framing'. Check '$genconf_file'\n"; |
| 52 |
} |
| 53 |
my $coding = $span->coding() || die "$0: No coding information for span #$num\n"; |
| 54 |
my $span_crc4 = $span->crc4(); |
| 55 |
$span_crc4 = (defined $span_crc4) ? ",$span_crc4" : ''; |
| 56 |
my $span_yellow = $span->yellow(); |
| 57 |
$span_yellow = (defined $span_yellow) ? ",$span_yellow" : ''; |
| 58 |
$timing = ($termtype eq 'NT') ? 0 : $bri_te_last_timing++; |
| 59 |
printf "span=%d,%d,%d,%s,%s%s%s\n", |
| 60 |
$num, |
| 61 |
$timing, |
| 62 |
$lbo, |
| 63 |
$framing, |
| 64 |
$coding, |
| 65 |
$span_crc4, |
| 66 |
$span_yellow; |
| 67 |
printf "# termtype: %s\n", lc($termtype); |
| 68 |
my $dchan_type; |
| 69 |
my $chan_range; |
| 70 |
if($span->is_pri()) { |
| 71 |
if ($pri_connection_type eq 'PRI') { |
| 72 |
$chan_range = Dahdi::Config::Gen::bchan_range($span); |
| 73 |
printf "bchan=%s\n", $chan_range; |
| 74 |
my $dchan = $span->dchan(); |
| 75 |
printf "dchan=%d\n", $dchan->num(); |
| 76 |
} elsif ($pri_connection_type eq 'R2' ) { |
| 77 |
my $idle_bits = $gconfig->{'r2_idle_bits'}; |
| 78 |
$chan_range = Dahdi::Config::Gen::bchan_range($span); |
| 79 |
printf "cas=%s:$idle_bits\n", $chan_range; |
| 80 |
} elsif ($pri_connection_type eq 'CAS' ) { |
| 81 |
my $type = ($termtype eq 'TE') ? 'FXO' : 'FXS'; |
| 82 |
my $sig = $gconfig->{'dahdi_signalling'}{$type}; |
| 83 |
my $em_signalling = $gconfig->{'em_signalling'}; |
| 84 |
if ($em_signalling ne 'none') { |
| 85 |
$sig = 'e&m'; |
| 86 |
# FIXME: but we don't handle E1 yet |
| 87 |
$sig = 'e&me1' if $proto eq 'E1'; |
| 88 |
} |
| 89 |
die "unknown default dahdi signalling for chan $num type $type" unless defined $sig; |
| 90 |
$chan_range = Dahdi::Config::Gen::chan_range($span->chans()); |
| 91 |
printf "%s=%s\n", $sig, $chan_range; |
| 92 |
} |
| 93 |
} else { |
| 94 |
die "Digital span $num is not PRI"; |
| 95 |
} |
| 96 |
print_echo_can($gconfig, $chan_range); |
| 97 |
} |
| 98 |
|
| 99 |
sub gen_digital($$$) { |
| 100 |
my $self = shift || die; |
| 101 |
my $gconfig = shift || die; |
| 102 |
my $span = shift || die; |
| 103 |
my $num = $span->num() || die; |
| 104 |
die "Span #$num is analog" unless $span->is_digital(); |
| 105 |
my $termtype = $span->termtype() || die "$0: Span #$num -- unkown termtype [NT/TE]\n"; |
| 106 |
my $timing; |
| 107 |
my $lbo = 0; |
| 108 |
my $framing = $span->framing() || die "$0: No framing information for span #$num\n"; |
| 109 |
my $coding = $span->coding() || die "$0: No coding information for span #$num\n"; |
| 110 |
my $span_crc4 = $span->crc4(); |
| 111 |
$span_crc4 = (defined $span_crc4) ? ",$span_crc4" : ''; |
| 112 |
my $span_yellow = $span->yellow(); |
| 113 |
$span_yellow = (defined $span_yellow) ? ",$span_yellow" : ''; |
| 114 |
my $span_termination = $span->termination(); |
| 115 |
$span_termination = (defined $span_termination) ? ",$span_termination" : ''; |
| 116 |
my $span_softntte = $span->softntte(); |
| 117 |
$span_softntte = (defined $span_softntte) ? ",$span_softntte" : ''; |
| 118 |
# "MFC/R2 does not normally use CRC4" |
| 119 |
# FIXME: a finer way to override: |
| 120 |
if ($gconfig->{'pri_connection_type'} eq 'R2') { |
| 121 |
$span_crc4 = ''; |
| 122 |
$framing = 'cas'; |
| 123 |
} |
| 124 |
$timing = ($termtype eq 'NT') ? 0 : $bri_te_last_timing++; |
| 125 |
printf "span=%d,%d,%d,%s,%s%s%s%s%s\n", |
| 126 |
$num, |
| 127 |
$timing, |
| 128 |
$lbo, |
| 129 |
$framing, |
| 130 |
$coding, |
| 131 |
$span_crc4, |
| 132 |
$span_yellow, |
| 133 |
$span_termination, |
| 134 |
$span_softntte; |
| 135 |
printf "# termtype: %s\n", lc($termtype); |
| 136 |
my $dchan_type; |
| 137 |
if ($span->is_bri()) { |
| 138 |
my $use_bristuff = 0; |
| 139 |
my $cfg_hardhdlc = $gconfig->{'bri_hardhdlc'}; |
| 140 |
my $xpd = Dahdi::Xpp::xpd_of_span($span); |
| 141 |
if(!defined($cfg_hardhdlc) || $cfg_hardhdlc =~ /AUTO/i) { |
| 142 |
# Autodetect |
| 143 |
if(defined($xpd)) { |
| 144 |
# Bristuff? |
| 145 |
if(defined($xpd->dchan_hardhdlc) && !is_true($xpd->dchan_hardhdlc)) { |
| 146 |
$use_bristuff = 1; |
| 147 |
} |
| 148 |
} |
| 149 |
} elsif(!is_true($cfg_hardhdlc)) { |
| 150 |
$use_bristuff = 1; |
| 151 |
} |
| 152 |
if($use_bristuff) { |
| 153 |
$dchan_type = 'dchan'; |
| 154 |
} else { |
| 155 |
$dchan_type = 'hardhdlc'; |
| 156 |
} |
| 157 |
printf "bchan=%s\n", Dahdi::Config::Gen::bchan_range($span); |
| 158 |
my $dchan = $span->dchan(); |
| 159 |
printf "$dchan_type=%d\n", $dchan->num(); |
| 160 |
} elsif($span->is_pri()) { |
| 161 |
if ($gconfig->{'pri_connection_type'} eq 'PRI') { |
| 162 |
printf "bchan=%s\n", Dahdi::Config::Gen::bchan_range($span); |
| 163 |
my $dchan = $span->dchan(); |
| 164 |
printf "dchan=%d\n", $dchan->num(); |
| 165 |
} elsif ($gconfig->{'pri_connection_type'} eq 'R2' ) { |
| 166 |
my $idle_bits = $gconfig->{'r2_idle_bits'}; |
| 167 |
printf "cas=%s:$idle_bits\n", Dahdi::Config::Gen::bchan_range($span); |
| 168 |
printf "dchan=%d\n", $span->dchan()->num(); |
| 169 |
} |
| 170 |
} else { |
| 171 |
die "Digital span $num is not BRI, nor PRI?"; |
| 172 |
} |
| 173 |
print_echo_can($gconfig, Dahdi::Config::Gen::bchan_range($span)); |
| 174 |
} |
| 175 |
|
| 176 |
sub gen_signalling($$) { |
| 177 |
my $gconfig = shift || die; |
| 178 |
my $chan = shift || die; |
| 179 |
my $type = $chan->type; |
| 180 |
my $num = $chan->num; |
| 181 |
|
| 182 |
die "channel $num type $type is not an analog channel\n" if $chan->span->is_digital(); |
| 183 |
if($type eq 'EMPTY') { |
| 184 |
printf "# channel %d, %s, no module.\n", $num, $chan->fqn; |
| 185 |
return; |
| 186 |
} |
| 187 |
my $signalling = $gconfig->{'dahdi_signalling'}; |
| 188 |
my $sig = $signalling->{$type} || die "unknown default dahdi signalling for chan $num type $type"; |
| 189 |
if ($type eq 'IN') { |
| 190 |
printf "# astbanktype: input\n"; |
| 191 |
} elsif ($type eq 'OUT') { |
| 192 |
printf "# astbanktype: output\n"; |
| 193 |
} |
| 194 |
printf "$sig=$num\n"; |
| 195 |
print_echo_can($gconfig, $num); |
| 196 |
} |
| 197 |
|
| 198 |
sub generate($$$) { |
| 199 |
my $self = shift || die; |
| 200 |
my $file = $self->{FILE}; |
| 201 |
my $gconfig = $self->{GCONFIG}; |
| 202 |
my $genopts = $self->{GENOPTS}; |
| 203 |
my @spans = @_; |
| 204 |
warn "Empty configuration -- no spans\n" unless @spans; |
| 205 |
rename "$file", "$file.bak" |
| 206 |
or $! == 2 # ENOENT (No dependency on Errno.pm) |
| 207 |
or die "Failed to backup old config: $!\n"; |
| 208 |
#$gconfig->dump; |
| 209 |
print "Generating $file\n" if $genopts->{verbose}; |
| 210 |
open(F, ">$file") || die "$0: Failed to open $file: $!\n"; |
| 211 |
my $old = select F; |
| 212 |
printf "# Autogenerated by $0 on %s\n", scalar(localtime); |
| 213 |
print "# If you edit this file and execute $0 again,\n"; |
| 214 |
print "# your manual changes will be LOST.\n"; |
| 215 |
print <<"HEAD"; |
| 216 |
# Dahdi Configuration File |
| 217 |
# |
| 218 |
# This file is parsed by the Dahdi Configurator, dahdi_cfg |
| 219 |
# |
| 220 |
HEAD |
| 221 |
foreach my $span (@spans) { |
| 222 |
printf "# Span %d: %s %s\n", $span->num, $span->name, $span->description; |
| 223 |
if($span->is_digital) { |
| 224 |
if($span->is_pri) { |
| 225 |
if($gconfig->{'pri_connection_type'} eq 'CAS') { |
| 226 |
$self->gen_t1_cas($gconfig, $span); |
| 227 |
} else { |
| 228 |
$self->gen_digital($gconfig, $span); |
| 229 |
} |
| 230 |
} elsif($span->is_bri) { |
| 231 |
$self->gen_digital($gconfig, $span); |
| 232 |
} |
| 233 |
} else { |
| 234 |
foreach my $chan ($span->chans()) { |
| 235 |
if(1 || !defined $chan->type) { |
| 236 |
my $type = $chan->probe_type; |
| 237 |
my $num = $chan->num; |
| 238 |
die "Failed probing type for channel $num" |
| 239 |
unless defined $type; |
| 240 |
$chan->type($type); |
| 241 |
} |
| 242 |
gen_signalling($gconfig, $chan); |
| 243 |
} |
| 244 |
} |
| 245 |
print "\n"; |
| 246 |
} |
| 247 |
print <<"TAIL"; |
| 248 |
# Global data |
| 249 |
|
| 250 |
loadzone = $gconfig->{'loadzone'} |
| 251 |
defaultzone = $gconfig->{'defaultzone'} |
| 252 |
TAIL |
| 253 |
close F; |
| 254 |
select $old; |
| 255 |
} |
| 256 |
|
| 257 |
1; |
| 258 |
|
| 259 |
__END__ |
| 260 |
|
| 261 |
=head1 NAME |
| 262 |
|
| 263 |
dahdi - Generate configuration for dahdi drivers. |
| 264 |
|
| 265 |
=head1 SYNOPSIS |
| 266 |
|
| 267 |
use Dahdi::Config::Gen::Dahdi; |
| 268 |
|
| 269 |
my $cfg = new Dahdi::Config::Gen::Dahdi(\%global_config, \%genopts); |
| 270 |
$cfg->generate(@span_list); |
| 271 |
|
| 272 |
=head1 DESCRIPTION |
| 273 |
|
| 274 |
Generate the F</etc/dahdi/system.conf>. |
| 275 |
This is the configuration for dahdi_cfg(1). |
| 276 |
|
| 277 |
Its location may be overriden via the environment variable F<DAHDI_CONF_FILE>. |