| 1 |
#!/bin/bash |
| 2 |
|
| 3 |
cvc4=./cvc4 |
| 4 |
bench="$1" |
| 5 |
|
| 6 |
logic=$(expr "$(grep -m1 '^[^;]*set-logic' "$bench")" : ' *(set-logic *\([A-Z_]*\) *) *$') |
| 7 |
|
| 8 |
# use: trywith [params..] |
| 9 |
# to attempt a run. Only thing printed on stdout is "sat" or "unsat", in |
| 10 |
# which case this run script terminates immediately. Otherwise, this |
| 11 |
# function returns normally. |
| 12 |
function trywith { |
| 13 |
limit=$1; shift; |
| 14 |
result="$(ulimit -S -t "$limit";$cvc4 -L smt2.6 --no-incremental --no-checking --no-interactive "$@" $bench)" |
| 15 |
case "$result" in |
| 16 |
sat|unsat) echo "$result"; exit 0;; |
| 17 |
esac |
| 18 |
} |
| 19 |
|
| 20 |
# use: finishwith [params..] |
| 21 |
# to run cvc4 and let it output whatever it will to stdout. |
| 22 |
function finishwith { |
| 23 |
$cvc4 -L smt2.6 --no-incremental --no-checking --no-interactive "$@" $bench |
| 24 |
} |
| 25 |
|
| 26 |
case "$logic" in |
| 27 |
|
| 28 |
QF_LRA) |
| 29 |
trywith 200 --enable-miplib-trick --miplib-trick-subs=4 --use-approx --lemmas-on-replay-failure --replay-early-close-depth=4 --replay-lemma-reject-cut=128 --replay-reject-cut=512 --unconstrained-simp --use-soi |
| 30 |
finishwith --no-restrict-pivots --use-soi --new-prop --unconstrained-simp |
| 31 |
;; |
| 32 |
QF_LIA) |
| 33 |
# same as QF_LRA but add --pb-rewrites |
| 34 |
finishwith --enable-miplib-trick --miplib-trick-subs=4 --use-approx --lemmas-on-replay-failure --replay-early-close-depth=4 --replay-lemma-reject-cut=128 --replay-reject-cut=512 --unconstrained-simp --use-soi --pb-rewrites |
| 35 |
;; |
| 36 |
QF_NIA) |
| 37 |
trywith 300 --nl-ext --nl-ext-tplanes --decision=internal |
| 38 |
trywith 1800 --solve-int-as-bv=2 --bitblast=eager --bv-sat-solver=cryptominisat |
| 39 |
trywith 1800 --solve-int-as-bv=4 --bitblast=eager --bv-sat-solver=cryptominisat |
| 40 |
trywith 1800 --solve-int-as-bv=8 --bitblast=eager --bv-sat-solver=cryptominisat |
| 41 |
trywith 1800 --solve-int-as-bv=16 --bitblast=eager --bv-sat-solver=cryptominisat |
| 42 |
finishwith --solve-int-as-bv=32 --bitblast=eager --bv-sat-solver=cryptominisat |
| 43 |
;; |
| 44 |
QF_NRA) |
| 45 |
trywith 300 --nl-ext --nl-ext-tplanes --decision=justification |
| 46 |
finishwith --nl-ext --nl-ext-tplanes |
| 47 |
;; |
| 48 |
# all logics with UF + quantifiers should either fall under this or special cases below |
| 49 |
ALIA|AUFLIA|AUFLIRA|AUFNIRA|UF|UFIDL|UFLIA|UFLRA|UFNIA|UFDT|UFDTLIA|AUFDTLIA|AUFBVDTLIA) |
| 50 |
# the following is designed for a run time of 2400s (40 min). |
| 51 |
# initial runs 1min |
| 52 |
trywith 20 --simplification=none --full-saturate-quant |
| 53 |
trywith 20 --no-e-matching --full-saturate-quant |
| 54 |
trywith 20 --fs-inst --decision=internal --full-saturate-quant |
| 55 |
# trigger selections 3min |
| 56 |
trywith 30 --relevant-triggers --full-saturate-quant |
| 57 |
trywith 30 --trigger-sel=max --full-saturate-quant |
| 58 |
trywith 30 --multi-trigger-when-single --full-saturate-quant |
| 59 |
trywith 30 --multi-trigger-when-single --multi-trigger-priority --full-saturate-quant |
| 60 |
trywith 30 --multi-trigger-cache --full-saturate-quant |
| 61 |
trywith 30 --no-multi-trigger-linear --full-saturate-quant |
| 62 |
# other 3min |
| 63 |
trywith 30 --pre-skolem-quant --full-saturate-quant |
| 64 |
trywith 30 --inst-when=full --full-saturate-quant |
| 65 |
trywith 30 --no-e-matching --no-quant-cf --full-saturate-quant |
| 66 |
trywith 30 --nl-ext --full-saturate-quant |
| 67 |
trywith 30 --full-saturate-quant --quant-ind |
| 68 |
trywith 60 --decision=internal --simplification=none --no-inst-no-entail --no-quant-cf --full-saturate-quant |
| 69 |
# finite model find 2min |
| 70 |
trywith 20 --finite-model-find --mbqi=none |
| 71 |
trywith 20 --finite-model-find |
| 72 |
trywith 20 --finite-model-find --uf-ss=no-minimal |
| 73 |
trywith 60 --finite-model-find --fmf-inst-engine |
| 74 |
# long runs 20min |
| 75 |
trywith 200 --decision=internal --full-saturate-quant |
| 76 |
trywith 200 --term-db-mode=relevant --full-saturate-quant |
| 77 |
trywith 200 --fs-inst --full-saturate-quant |
| 78 |
trywith 600 --finite-model-find --decision=internal |
| 79 |
# finite model find 1min |
| 80 |
trywith 30 --finite-model-find --fmf-bound-int |
| 81 |
trywith 30 --finite-model-find --sort-inference |
| 82 |
# finish 10min |
| 83 |
finishwith --full-saturate-quant |
| 84 |
;; |
| 85 |
UFBV) |
| 86 |
# most problems in UFBV are essentially BV |
| 87 |
trywith 300 --full-saturate-quant |
| 88 |
trywith 300 --full-saturate-quant --no-cbqi |
| 89 |
trywith 300 --full-saturate-quant --cbqi --decision=internal |
| 90 |
finishwith --finite-model-find |
| 91 |
;; |
| 92 |
BV) |
| 93 |
trywith 300 --full-saturate-quant |
| 94 |
trywith 300 --full-saturate-quant --no-cbqi |
| 95 |
finishwith --full-saturate-quant --cbqi --decision=internal |
| 96 |
;; |
| 97 |
LIA|LRA) |
| 98 |
trywith 30 --full-saturate-quant |
| 99 |
trywith 300 --full-saturate-quant --cbqi-midpoint |
| 100 |
trywith 300 --full-saturate-quant --cbqi-nested-qe |
| 101 |
finishwith --full-saturate-quant --cbqi --cbqi-nested-qe --decision=internal |
| 102 |
;; |
| 103 |
NIA|NRA) |
| 104 |
trywith 30 --full-saturate-quant |
| 105 |
trywith 300 --full-saturate-quant --nl-ext |
| 106 |
trywith 300 --full-saturate-quant --cbqi-nested-qe |
| 107 |
finishwith --full-saturate-quant --cbqi --cbqi-nested-qe --decision=internal |
| 108 |
;; |
| 109 |
QF_AUFBV) |
| 110 |
trywith 600 |
| 111 |
finishwith --decision=justification-stoponly |
| 112 |
;; |
| 113 |
QF_ABV) |
| 114 |
trywith 50 --ite-simp --simp-with-care --repeat-simp --arrays-weak-equiv |
| 115 |
trywith 500 --arrays-weak-equiv |
| 116 |
finishwith --ite-simp --simp-with-care --repeat-simp --arrays-weak-equiv |
| 117 |
;; |
| 118 |
QF_UFBV) |
| 119 |
finishwith --bitblast=eager --bv-sat-solver=cryptominisat |
| 120 |
;; |
| 121 |
QF_BV) |
| 122 |
exec ./pcvc4 -L smt2.6 --no-incremental --no-checking --no-interactive --thread-stack=1024 \ |
| 123 |
--threads 2 \ |
| 124 |
--thread0 '--unconstrained-simp --bv-div-zero-const --bv-intro-pow2 --bitblast=eager --bv-sat-solver=cryptominisat --bitblast-aig --no-bv-abstraction' \ |
| 125 |
--thread1 '--unconstrained-simp --bv-div-zero-const --bv-intro-pow2 --bv-eq-slicer=auto --no-bv-abstraction' \ |
| 126 |
--no-wait-to-join \ |
| 127 |
"$bench" |
| 128 |
#trywith 10 --bv-eq-slicer=auto --decision=justification |
| 129 |
#trywith 60 --decision=justification |
| 130 |
#trywith 600 --decision=internal --bitblast-eager |
| 131 |
#finishwith --decision=justification --decision-use-weight --decision-weight-internal=usr1 |
| 132 |
;; |
| 133 |
QF_AUFLIA) |
| 134 |
finishwith --no-arrays-eager-index --arrays-eager-lemmas --decision=justification |
| 135 |
;; |
| 136 |
QF_AX) |
| 137 |
finishwith --no-arrays-eager-index --arrays-eager-lemmas --decision=internal |
| 138 |
;; |
| 139 |
QF_AUFNIA) |
| 140 |
finishwith --decision=justification --no-arrays-eager-index --arrays-eager-lemmas |
| 141 |
;; |
| 142 |
QF_ALIA) |
| 143 |
trywith 70 --decision=justification --arrays-weak-equiv |
| 144 |
finishwith --decision=justification-stoponly --no-arrays-eager-index --arrays-eager-lemmas |
| 145 |
;; |
| 146 |
*) |
| 147 |
# just run the default |
| 148 |
finishwith |
| 149 |
;; |
| 150 |
|
| 151 |
esac |
| 152 |
|