| 1 |
Version 1.4.8 |
| 2 |
~~~~~~~~~~~~~ |
| 3 |
Released: 2025-06-23 |
| 4 |
|
| 5 |
New Features: |
| 6 |
- Add AppStream metainfo XML with hardware provide info (Petter Reinholdtsen) |
| 7 |
- Add support for -Dsystemd_root_prefix to make local building easier (Richard Hughes) |
| 8 |
- Install sysusers.d config file if configured user is not root (Luca Boccassi) |
| 9 |
|
| 10 |
Bugfixes: |
| 11 |
- Add the source attribute for each man page (Xi Ruoyao) |
| 12 |
- Drop component type from AppStream metadata XML to avoid parsing error (Petter Reinholdtsen) |
| 13 |
- Fix a critical warning when running the self tests (Richard Hughes) |
| 14 |
- Fix USB scanners not working with RestrictAddressFamilies (Ferdinand Bachmann) |
| 15 |
- Fix writing to the database with ProtectSystem=strict (Richard Hughes) |
| 16 |
- Properly set the status to CD_SESSION_STATUS_RUNNING (Laurent Bigonville) |
| 17 |
- Use g_ascii_strtod instead of atof() (Laurent Bigonville) |
| 18 |
- Use sqlite3_errmsg() to avoid getting a mutable error message (psykose, Richard Hughes) |
| 19 |
|
| 20 |
Version 1.4.7 |
| 21 |
~~~~~~~~~~~~~ |
| 22 |
Released: 2024-01-22 |
| 23 |
|
| 24 |
Bugfixes: |
| 25 |
- Add various hardenings to the systemd service (Johannes Segitz) |
| 26 |
- Always close the ICC profile when loading fails (Jonas Ådahl) |
| 27 |
- Avoid destructing LCMS plugin twice with lcms 2.14 (Sam James) |
| 28 |
- Do not make state files executable in tmpfiles.d/colord.conf (Roshan Shariff) |
| 29 |
- Fix a double free spotted by Coverity (Richard Hughes) |
| 30 |
- Fix an error check when parsing the DTP94 data (Richard Hughes) |
| 31 |
- Fix a -Wincompatible-pointer-types warning (Richard Hughes) |
| 32 |
- Fix potential crash when reading from broken Huey hardware (Richard Hughes) |
| 33 |
- Set FILE_OFFSET_BITS explicitly (Sam James) |
| 34 |
- Use a 64-bit time_t (Sam James) |
| 35 |
- Use thread context for Gamut Alarm codes (Martin Owens) |
| 36 |
|
| 37 |
Version 1.4.6 |
| 38 |
~~~~~~~~~~~~~ |
| 39 |
Released: 2022-02-16 |
| 40 |
|
| 41 |
Bugfixes: |
| 42 |
- Add missing copyright notices (Aaron Plattner) |
| 43 |
- Add Spyder X entry (Misha Gusarov) |
| 44 |
- Document where to send patches (Misha Gusarov) |
| 45 |
- Don't use exact floating point comparisons (Christopher James Halse Rogers) |
| 46 |
- Drop option for removed reverse engineering tools (Mingcong Bai) |
| 47 |
- Drop references to hughski.com (Paul Wise) |
| 48 |
- Fix a small memory leak in sqlite3_exec() (Zero0one1) |
| 49 |
- Fix typo in device-removed signal documentation (Jeremy Cline) |
| 50 |
- Make introspection optional in meson (David Michael) |
| 51 |
|
| 52 |
Version 1.4.5 |
| 53 |
~~~~~~~~~~~~~ |
| 54 |
Released: 2020-11-02 |
| 55 |
|
| 56 |
New Features: |
| 57 |
- Add cd_icc_create_default_full (Aaron Plattner) |
| 58 |
- Add cd_icc_utils_get_adaptation_matrix (Aaron Plattner) |
| 59 |
- Add cd_mat33_is_finite (Aaron Plattner) |
| 60 |
- Add support for datacolor SpyderX (Richard Brown) |
| 61 |
|
| 62 |
Bugfixes: |
| 63 |
- Check for errors from more sqlite calls (Ross Burton) |
| 64 |
- Fix cd_icc_load_data() annotation for the data array (Elmar Hoffmann) |
| 65 |
- Fix cd-sensor-dummy (Christopher James Halse Rogers) |
| 66 |
- Fix more annotation for data arrays (Elmar Hoffmann) |
| 67 |
- Fix owner and permissions on existing state files (Will Thompson) |
| 68 |
- Fix segfault due to dereferencing NULL pointer (Simon Munton) |
| 69 |
- Make the build reproductible (Laurent Bigonville) |
| 70 |
- Refactor opening of mapping database and try again if fails (Ross Burton) |
| 71 |
|
| 72 |
Version 1.4.4 |
| 73 |
~~~~~~~~~~~~~ |
| 74 |
Released: 2019-03-08 |
| 75 |
|
| 76 |
New Features: |
| 77 |
- Actually install the installed tests (Richard Hughes) |
| 78 |
- Allow building without the daemon (Richard Hughes) |
| 79 |
|
| 80 |
Bugfixes: |
| 81 |
- Consistently search for spotread in $PATH (Christopher James Halse Rogers) |
| 82 |
- Don't hard-require spotread to build argyll sensor (Christopher James Halse Rogers) |
| 83 |
- Fix linker argument checks (Ting-Wei Lan) |
| 84 |
- Include C header in Colorhug-1.0.gir (Tomasz Miąsko) |
| 85 |
- Pass -DCD_COMPILATION to gir compiler (maxice8) |
| 86 |
- Port manpages to xsltproc and DocBook 5 (Jan Tojnar) |
| 87 |
|
| 88 |
Version 1.4.3 |
| 89 |
~~~~~~~~~~~~~ |
| 90 |
Released: 2018-04-18 |
| 91 |
|
| 92 |
Bugfixes: |
| 93 |
- Make cd_color_get_blackbody_rgb_full safer (Jan Alexander Steffens) |
| 94 |
- Update style of Meson build options (Soapux) |
| 95 |
- Update warning about running daemon as root (Soapux) |
| 96 |
|
| 97 |
Version 1.4.2 |
| 98 |
~~~~~~~~~~~~~ |
| 99 |
Released: 2018-03-12 |
| 100 |
|
| 101 |
New Features: |
| 102 |
- Add cd_icc_set_created (Christopher James Halse Rogers) |
| 103 |
- Add --enable-timestamps option for CREATED header (Jérémy Bobbio) |
| 104 |
|
| 105 |
Bugfixes: |
| 106 |
- Avoid buffer overflow when reading profile_id (Richard Hughes) |
| 107 |
- Fix the detection of duplicate EDIDs (Richard Hughes) |
| 108 |
- Make udev hwdb optional by using pnp.ids as fallback (Ting-Wei Lan) |
| 109 |
- Raise _XOPEN_SOURCE to 700 to enable C99 on FreeBSD (Ting-Wei Lan) |
| 110 |
- Refactor build directory selection (Jan Tojnar) |
| 111 |
- Set cd-create-profile date to SOURCE_DATE_EPOCH (Christopher James Halse Rogers) |
| 112 |
|
| 113 |
Version 1.4.1 |
| 114 |
~~~~~~~~~~~~~ |
| 115 |
Released: 2017-08-21 |
| 116 |
|
| 117 |
Bugfixes: |
| 118 |
- Add back the meson -Denable-systemd=false configure argument (Richard Hughes) |
| 119 |
- Add the fallback rules for older PolicyKit versions (Richard Hughes) |
| 120 |
- Define PATH_MAX if not available (Emmanuele Bassi) |
| 121 |
- Enable C99 support in meson.build (Philip Withnall) |
| 122 |
- Include all the files in the GIR target (Richard Hughes) |
| 123 |
- Include the correct file when using Colord-1.0.gir (Richard Hughes) |
| 124 |
- Use appropriate feature macro for realpath() (Emmanuele Bassi, Philip Withnall) |
| 125 |
- Use gio-2.0 when generating the VAPI (Ernestas Kulik) |
| 126 |
|
| 127 |
Version 1.4.0 |
| 128 |
~~~~~~~~~~~~~ |
| 129 |
Released: 2017-08-09 |
| 130 |
|
| 131 |
New Features: |
| 132 |
- Port to the Meson build system (Richard Hughes) |
| 133 |
- Enable Travis CI for Fedora 25 and Debian Stretch (Richard Hughes) |
| 134 |
- Make PolicyKit, gusb and udev a hard requirement (Richard Hughes) |
| 135 |
|
| 136 |
Bugfixes: |
| 137 |
- Add some experimental tools for the HueyCOLOR sensor as found in the P70 (Richard Hughes) |
| 138 |
- Conditionally build documentation and man pages (Emmanuele Bassi) |
| 139 |
- Correctly build the ICC transfer curve for Rec709 (Richard Hughes) |
| 140 |
- Do not build the examples as part of the regular build (Richard Hughes) |
| 141 |
- Do not spin the Huey LEDs when the sensor is embedded (Richard Hughes) |
| 142 |
- Do not use /tmp to create profiles (Richard Hughes) |
| 143 |
- Fix the version numbers in cd-version.h to reflect reality (Ben Iofel, Emmanuele Bassi) |
| 144 |
- Get the Huey status before trying to unlock (Richard Hughes) |
| 145 |
- Use a different Huey unlock code on the W700 laptop (Richard Hughes) |
| 146 |
|
| 147 |
Version 1.3.5 |
| 148 |
~~~~~~~~~~~~~ |
| 149 |
Released: 2017-02-27 |
| 150 |
|
| 151 |
New Features: |
| 152 |
- Add cd_color_get_blackbody_rgb_full() (Richard Hughes) |
| 153 |
- Add cd_spectrum_multiply_scalar() (Richard Hughes) |
| 154 |
|
| 155 |
Bugfixes: |
| 156 |
- Check the parsed context arguments in the session helper (Richard Hughes) |
| 157 |
|
| 158 |
Version 1.3.4 |
| 159 |
~~~~~~~~~~~~~ |
| 160 |
Released: 2016-11-21 |
| 161 |
|
| 162 |
New Features: |
| 163 |
- colord: Add cd_color_rgb_from_wavelength() (Richard Hughes) |
| 164 |
- colord: Add cd_spectrum_resample_to_size() (Richard Hughes) |
| 165 |
- colorhug: Add commands for getting the device calibration spectra (Richard Hughes) |
| 166 |
- colorhug: Increase the size of the EP0 transfer (Richard Hughes) |
| 167 |
- colorhug: Support enabling the illuminants on the ColorHug+ (Richard Hughes) |
| 168 |
|
| 169 |
Bugfixes: |
| 170 |
- Fix a possible NULL dereference when talking to Spark devices (Richard Hughes) |
| 171 |
- Fix compile with -Wformat-signedness (Richard Hughes) |
| 172 |
- Fix possible division by zero if parsing /proc/cpuinfo fails (Richard Hughes) |
| 173 |
- Install the libcolordcompat.so in the main -libs package (Richard Hughes) |
| 174 |
|
| 175 |
Version 1.3.3 |
| 176 |
~~~~~~~~~~~~~ |
| 177 |
Released: 2016-07-27 |
| 178 |
|
| 179 |
Bugfixes: |
| 180 |
- Check polkit version before defining g_autoptr macros (Emmanuele Bassi) |
| 181 |
- Fix an assert failure when connecting to sensors (Richard Hughes) |
| 182 |
- Fix gtk-doc build when srcdir != builddir (Ting-Wei Lan) |
| 183 |
- Increase timeout to 60s for argyll spotread sampling (Kjell Irgens) |
| 184 |
- Use the USB path to match the ArgyllCMS port (Richard Hughes) |
| 185 |
|
| 186 |
Version 1.3.2 |
| 187 |
~~~~~~~~~~~~~ |
| 188 |
Released: 2016-03-21 |
| 189 |
|
| 190 |
New Features: |
| 191 |
- Make building the daemon optional (Richard Hughes) |
| 192 |
- Make the session helper optional (Richard Hughes) |
| 193 |
- libcolorhug: Add initial support for the v2 protocol used by ColorHug+ (Richard Hughes) |
| 194 |
|
| 195 |
Bugfixes: |
| 196 |
- libcolord: Fix a hard-to-reproduce bug when cancelling async operations (Richard Hughes) |
| 197 |
- libcolorhug: Fix a crash when submitting lots of commands at the same time (Richard Hughes) |
| 198 |
- Replace '/' with '-' on the basename to fix calibration crash (Canek Peláez Valdés) |
| 199 |
|
| 200 |
Version 1.3.1 |
| 201 |
~~~~~~~~~~~~~ |
| 202 |
Released: 2015-11-27 |
| 203 |
|
| 204 |
New Features: |
| 205 |
- Add a sensor error for missing dark calibration (Richard Hughes) |
| 206 |
- Add g_autoptr() defines for cd_color* (Richard Hughes) |
| 207 |
- Add get-spectral-reading command to colormgr (Richard Hughes) |
| 208 |
- Add the GetSpectrum() sensor D-Bus method (Richard Hughes) |
| 209 |
- Allow returning spectral readings from the Spark sensor (Richard Hughes) |
| 210 |
- libcolord: Add an error enum for missing irradiance calibration (Richard Hughes) |
| 211 |
- libcolord: Add a spectral sensor capability (Richard Hughes) |
| 212 |
- libcolord: Add cd_sensor_get_spectrum() (Richard Hughes) |
| 213 |
- libcolord: Add cd_spectrum_get_value_max() (Richard Hughes) |
| 214 |
- libcolord: Add cd_spectrum_limit_min() (Richard Hughes) |
| 215 |
- libcolord: Add cd_spectrum_planckian_new_full() (Richard Hughes) |
| 216 |
- libcolord: Add cd_spectrum_resample() (Richard Hughes) |
| 217 |
- libcolord: Add cd_spectrum_set_wavelength_cal() (Richard Hughes) |
| 218 |
- libcolord: Add cd_spectrum_subtract() (Richard Hughes) |
| 219 |
- libcolord: Add cd_spectrum_to_string() (Richard Hughes) |
| 220 |
|
| 221 |
Bugfixes: |
| 222 |
- Add a systemd user service corresponding to the D-Bus session service (Simon McVittie) |
| 223 |
- Add a tmpfiles.d snippet to fix stateless systems (Tobias Hunger) |
| 224 |
- data: Build Rec709 correctly (Richard Hughes) |
| 225 |
- Ignore the ColorHug+ in DFU mode (Richard Hughes) |
| 226 |
- Install the tmpfiles.d snippet in the right place (Richard Hughes) |
| 227 |
- Reset the sensor back to idle after each action (Richard Hughes) |
| 228 |
- libcolord: Fix a tiny memory leak in cd_icc_get_tag_data() (Richard Hughes) |
| 229 |
- libcolord: Fix saving non-normalized spectra (Richard Hughes) |
| 230 |
- libcolord: Make cd_spectrum_free() NULL-safe (Richard Hughes) |
| 231 |
- libcolord: Return an error when we fail to estimate the gamma value (Richard Hughes) |
| 232 |
|
| 233 |
Version 1.2.12 |
| 234 |
~~~~~~~~~~~~~~ |
| 235 |
Released: 2015-08-19 |
| 236 |
|
| 237 |
New Features: |
| 238 |
- Add a new private library libospark for future use (Richard Hughes) |
| 239 |
|
| 240 |
Bugfixes: |
| 241 |
- Allow creating devices with the same device ID from different users (Richard Hughes) |
| 242 |
- Check for, and prefer, libsystemd over libsystemd-login (Christopher James Halse Rogers) |
| 243 |
- ColorHug: Add ch_device_queue_read_firmware() (Richard Hughes) |
| 244 |
- ColorHug: When converting HEX to BIN pad out the entire size (Richard Hughes) |
| 245 |
|
| 246 |
Version 1.2.11 |
| 247 |
~~~~~~~~~~~~~~ |
| 248 |
Released: 2015-06-08 |
| 249 |
|
| 250 |
New Features: |
| 251 |
- Add defines and artwork for the Spyder5 device (Richard Hughes) |
| 252 |
- Add defines for the OceanOptics Spark sensor (Richard Hughes) |
| 253 |
- libcolorhug: Add ch_device_close (Benjamin Tissoires) |
| 254 |
- libcolorhug: Handle low-level commands when in Sensor HID mode (Richard Hughes) |
| 255 |
|
| 256 |
Bugfixes: |
| 257 |
- libcolord: Fix leak in cd_context_lcms_free (Roman Lebedev) |
| 258 |
- libcolord: Fix leak previously in cd_client_connect_cb (Roman Lebedev) |
| 259 |
- Only return devices created by the calling user when doing GetDevices (Richard Hughes) |
| 260 |
|
| 261 |
Version 1.2.10 |
| 262 |
~~~~~~~~~~~~~~ |
| 263 |
Released: 2015-04-08 |
| 264 |
|
| 265 |
New Features: |
| 266 |
- colorhug: Add GUIDs for each device (Richard Hughes) |
| 267 |
|
| 268 |
Bugfixes: |
| 269 |
- Add a vendor quirk for Google (Richard Hughes) |
| 270 |
- Fix session-helper failing to find argyll tool (Tim Waugh) |
| 271 |
|
| 272 |
Version 1.2.9 |
| 273 |
~~~~~~~~~~~~~ |
| 274 |
Released: 2015-02-20 |
| 275 |
|
| 276 |
New Features: |
| 277 |
- colorhug: Add support for the ColorHug ALS device (Richard Hughes) |
| 278 |
- colorhug: Return the exact address on verification failure (Richard Hughes) |
| 279 |
|
| 280 |
Bugfixes: |
| 281 |
- Fix cd-test-private linking (Christopher James Halse Rogers) |
| 282 |
- Fix reporting of logind errors (Christopher James Halse Rogers) |
| 283 |
|
| 284 |
Version 1.2.8 |
| 285 |
~~~~~~~~~~~~~ |
| 286 |
Released: 2015-01-15 |
| 287 |
|
| 288 |
Notes: |
| 289 |
- The required libgusb library version has been bumped to 0.2.2 |
| 290 |
|
| 291 |
Bugfixes: |
| 292 |
- Check for dbus when enabling sane (Niels Ole Salscheider) |
| 293 |
- Do not use the deprecated GUsbDeviceList (Richard Hughes) |
| 294 |
- Fix build without gobject-introspection (Niels Ole Salscheider) |
| 295 |
- Fix possible critical warning when using g_dbus_watch_name() (Richard Hughes) |
| 296 |
|
| 297 |
Version 1.2.7 |
| 298 |
~~~~~~~~~~~~~ |
| 299 |
Released: 2014-12-02 |
| 300 |
|
| 301 |
Bugfixes: |
| 302 |
- Don't build the daemon when compiling for MinGW (Richard Hughes) |
| 303 |
- Use wine to run the client build tools when compiling under MinGW (Richard Hughes) |
| 304 |
|
| 305 |
Version 1.2.6 |
| 306 |
~~~~~~~~~~~~~ |
| 307 |
Released: 2014-11-24 |
| 308 |
|
| 309 |
New Features: |
| 310 |
- Allowing compile using mingw (Richard Hughes) |
| 311 |
- Make the ArgyllCMS sensor driver optional (Richard Hughes) |
| 312 |
- libcolord: Add cd_it8_get_xyz_for_rgb() (Richard Hughes) |
| 313 |
- libcolord: Add cd_it8_utils_calculate_gamma() (Richard Hughes) |
| 314 |
- libcolord: Add cd_spectrum_get_resolution() (Richard Hughes) |
| 315 |
- libcolord: Add cd_spectrum_get_value_raw() (Richard Hughes) |
| 316 |
- libcolord: Add cd_spectrum_normalize_max() (Richard Hughes) |
| 317 |
- libcolord: Add cd_spectrum_set_value() (Richard Hughes) |
| 318 |
|
| 319 |
Bugfixes: |
| 320 |
- libcolord: Allow a SPECTRAL_START_NM value of zero (Richard Hughes) |
| 321 |
- libcolord: Always replace CCSS spectral data of the same ID (Richard Hughes) |
| 322 |
- libcolord: Deep copy the spectral data when using cd_spectrum_dup() (Richard Hughes) |
| 323 |
- libcolord: Fix using cd_it8_add_spectrum() where the spectra have no ID values (Richard Hughes) |
| 324 |
- libcolord: Never allow duplicate CCSS IDs for small wavelength ranges (Richard Hughes) |
| 325 |
- libcolord: Only set SPECTRAL_NORM when the normalisation is enabled (Richard Hughes) |
| 326 |
- libcolord: Return correct values when no LUMINANCE_XYZ_CDM2 is specified (Richard Hughes) |
| 327 |
- libcolord: Use double precision for SPECTRAL_START_NM and SPECTRAL_END_NM (Richard Hughes) |
| 328 |
- libcolord: When using cd_it8_add_spectrum() replace any with the same ID (Richard Hughes) |
| 329 |
|
| 330 |
Version 1.2.5 |
| 331 |
~~~~~~~~~~~~~ |
| 332 |
Released: 2014-11-10 |
| 333 |
|
| 334 |
New Features: |
| 335 |
- Add a branding-less ColorHug2 figure (Pascal de Bruijn) |
| 336 |
- Add the calculate-ccmx subcommand to cd-it8 (Richard Hughes) |
| 337 |
- Install the now-useful cd-it8 helper (Richard Hughes) |
| 338 |
|
| 339 |
Bugfixes: |
| 340 |
- Drop nb.po, its superfluous with nb_NO.po around (Torstein Husebø) |
| 341 |
- Fix a crash in the session helper while calibrating (Richard Hughes) |
| 342 |
- Remove the private cd-find-broken tool (Richard Hughes) |
| 343 |
|
| 344 |
Version 1.2.4 |
| 345 |
~~~~~~~~~~~~~ |
| 346 |
Released: 2014-10-12 |
| 347 |
|
| 348 |
New Features: |
| 349 |
- libcolord: Add cd_mat33_init() helper function (Richard Hughes) |
| 350 |
- libcolorhug: Retry the command if the response is incomplete (Richard Hughes) |
| 351 |
|
| 352 |
Bugfixes: |
| 353 |
- Don't enable PIE support when --without-pic is specified (Richard Hughes) |
| 354 |
- libcolord: Build with PIE enabled (Richard Hughes) |
| 355 |
|
| 356 |
Version 1.2.3 |
| 357 |
~~~~~~~~~~~~~ |
| 358 |
Released: 2014-09-12 |
| 359 |
|
| 360 |
New Features: |
| 361 |
- colorhug: Add ch_device_check_firmware() (Richard Hughes) |
| 362 |
- colorhug: Add ch_device_mode_from_firmware() (Richard Hughes) |
| 363 |
- colorhug: Use a different PID for the ColorHug2 bootloader (Richard Hughes) |
| 364 |
|
| 365 |
Bugfixes: |
| 366 |
- Fix the device path to allow uid or username to be omitted (Iain Lane) |
| 367 |
- There is no seat if running in a chroot (Iain Lane) |
| 368 |
|
| 369 |
Version 1.2.2 |
| 370 |
~~~~~~~~~~~~~ |
| 371 |
Released: 2014-08-18 |
| 372 |
|
| 373 |
New Features: |
| 374 |
- Add a helper to calculate the ΔE of two colors (Richard Hughes) |
| 375 |
- Bump the lcms2 dep to 2.6 (Richard Hughes) |
| 376 |
- Use the ColorHug sensor driver for the ColorHug2 hardware (Richard Hughes) |
| 377 |
|
| 378 |
Bugfixes: |
| 379 |
- Actually parse the EDID for better duplicate detection (Richard Hughes) |
| 380 |
- Actually write a file when using cd_icc_save_default() (Richard Hughes) |
| 381 |
- Do not try to return a CdIcc instance for virtual profiles (Richard Hughes) |
| 382 |
- Use __attribute__(cleanup) to simplify memory cleanup (Richard Hughes) |
| 383 |
|
| 384 |
Version 1.2.1 |
| 385 |
~~~~~~~~~~~~~ |
| 386 |
Released: 2014-05-23 |
| 387 |
|
| 388 |
New Features: |
| 389 |
- Allow users to rename session and system ICC profiles (Richard Hughes) |
| 390 |
|
| 391 |
Bugfixes: |
| 392 |
- Fix building the CMF spectra on OpenBSD/sparc64 (Richard Hughes) |
| 393 |
- Fix the style of two colorimeter figures (Pascal de Bruijn) |
| 394 |
- Make colord polkit policy usable on servers (Stef Walter) |
| 395 |
- Trim out the CUPS-supplied prefix for the printer serial number (Richard Hughes) |
| 396 |
|
| 397 |
Version 1.2.0 |
| 398 |
~~~~~~~~~~~~~ |
| 399 |
Released: 2014-04-05 |
| 400 |
|
| 401 |
New Features: |
| 402 |
- Generate the CMFs from source data (Richard Hughes) |
| 403 |
- Install several standard illuminants (Richard Hughes) |
| 404 |
- Install the CRI Test Color Samples (Richard Hughes) |
| 405 |
- Make colormgr script friendly by allowing filtering (Richard Hughes) |
| 406 |
- Use the new cmsContext functionality in LCMS 2.6 (Richard Hughes) |
| 407 |
- colord: Add a RGB32 pixel format for GdkPixbuf (Richard Hughes) |
| 408 |
- colord: Add a utility function to calculate an XYZ value from a CMF (Richard Hughes) |
| 409 |
- colord: Add a whitepoint value to cd_color_xyz_to_uvw() (Richard Hughes) |
| 410 |
- colord: Add CdColorUVW and some useful functionality (Richard Hughes) |
| 411 |
- colord: Add cd_color_xyz_to_cct() (Richard Hughes) |
| 412 |
- colord: Add cd_icc_get_context() to get the internal cmsContext used by lcms2 (Richard Hughes) |
| 413 |
- colord: Add cd_it8_utils_calculate_cri_from_cmf() to generate a CRI (Richard Hughes) |
| 414 |
- colord: Add cd_spectrum_multiply() to multiply two spectra (Richard Hughes) |
| 415 |
- colord: Add cd_spectrum_planckian_new() (Richard Hughes) |
| 416 |
- colord: Add functionality to read and write raw tag data (Richard Hughes) |
| 417 |
- colord: Support CCSS data files (Richard Hughes) |
| 418 |
- colord: Support SPECTRAL_NORM in it8 files (Richard Hughes) |
| 419 |
- colorhug: Support setting and getting the DAC value (Richard Hughes) |
| 420 |
|
| 421 |
Bugfixes: |
| 422 |
- Correctly convert all of the image when using CdTransform (Richard Hughes) |
| 423 |
- EDID strings can be up to 13 bytes (Florian Höch) |
| 424 |
- Fix the blue primary check so ProPhotoRGB is not marked as invalid (Richard Hughes) |
| 425 |
- Fix the tag 'size' when viewing a profile in cd-iccdump with newer lcms versions (Richard Hughes) |
| 426 |
- Only include libudev in Requires.private on Linux (Richard Hughes) |
| 427 |
- Use the correct sensor-kind values for GretagMacbeth sensors (Richard Hughes) |
| 428 |
- colord: Do not invalidate the CdTransform if the CdIcc object does not change (Richard Hughes) |
| 429 |
- colord: Do not use G_GNUC_WARN_UNUSED_RESULT when uninhibiting (Richard Hughes) |
| 430 |
- colord: Fix a potential crash when destroying a CdIt8 object (Richard Hughes) |
| 431 |
- colord: Fix the GObject introspection for cd_device_get_profiles() (Richard Hughes) |
| 432 |
- colord: Improve the error handling in CdIt8 (Richard Hughes) |
| 433 |
- colord: Load the profile defaults when using cd_icc_create_default() (Richard Hughes) |
| 434 |
- colorhug: Handle failure to initialise GUsb in self-tests (Christopher James Halse Rogers) |
| 435 |
- colorhug: Rename 'ColorHug Spectro' to 'ColorHug+' for trademark reasons (Richard Hughes) |
| 436 |
|
| 437 |
Version 1.1.5 |
| 438 |
~~~~~~~~~~~~~ |
| 439 |
Released: 2013-12-11 |
| 440 |
|
| 441 |
New Features: |
| 442 |
- Change the --enable-gudev parameter into --enable-udev (Richard Hughes) |
| 443 |
- Fall back to parsing pnp.ids if udev is not available (Richard Hughes) |
| 444 |
|
| 445 |
Bugfixes: |
| 446 |
- Don't crash with zero-sized ICC file (Marti Raudsepp) |
| 447 |
- Never add USB hubs as scanner devices even if tagged (Richard Hughes) |
| 448 |
- Never create color managed webcam devices (Richard Hughes) |
| 449 |
- libcolord: Check that the vendor and model are valid UTF-8 (Richard Hughes) |
| 450 |
- libcolord: Do not write invalid data when the resaving a profile (Richard Hughes) |
| 451 |
- libcolord: Don't create legacy locations (Matthias Clasen) |
| 452 |
- libcolord: Ensure the parsed EDID strings are valid UTF-8 (Richard Hughes) |
| 453 |
- libcolord: Ensure the version is set when creating from the EDID (Richard Hughes) |
| 454 |
- libcolord: Fix crash when using cd_color_get_blackbody_rgb() (Richard Hughes) |
| 455 |
- libcolord: No critical warning if udev_hwdb_new() fails (Richard Hughes) |
| 456 |
- session-helper: Do not crash when moving the sensor position (Richard Hughes) |
| 457 |
|
| 458 |
Version 1.1.4 |
| 459 |
~~~~~~~~~~~~~ |
| 460 |
Released: 2013-11-19 |
| 461 |
|
| 462 |
Bugfixes: |
| 463 |
- Only syslog() profile additions when they're added via DBus (Colin Walters) |
| 464 |
- Reset the LCMS log handlers to default after use (Richard Hughes) |
| 465 |
- Use the threadsafe versions of the LCMS functions (Richard Hughes) |
| 466 |
|
| 467 |
Version 1.1.3 |
| 468 |
~~~~~~~~~~~~~ |
| 469 |
Released: 2013-10-30 |
| 470 |
|
| 471 |
Note: |
| 472 |
- This release contains a patch that fixes a very mild security bug: |
| 473 |
If you send keep sending hundreds of megabytes of random text data to the |
| 474 |
SetProperty() method you can eventually cause the daemon to use a lot of |
| 475 |
memory and then crash with an out-of-memory condition. |
| 476 |
- As the daemon is typically running as a restricted user and the daemon is |
| 477 |
respawned by any client the system will automatically recover. |
| 478 |
- This issue was found by Matus Marhefka using the dfuzzer tool. |
| 479 |
|
| 480 |
Bugfixes: |
| 481 |
- Never print incomplete 'colormgr dump' output (Richard Hughes) |
| 482 |
- Restrict the length of key and values when setting metadata (Richard Hughes) |
| 483 |
|
| 484 |
Version 1.1.2 |
| 485 |
~~~~~~~~~~~~~ |
| 486 |
Released: 2013-09-13 |
| 487 |
|
| 488 |
New Features: |
| 489 |
- Add a 'dump' colormgr command to aid debugging (Richard Hughes) |
| 490 |
- libcolord: Add ability to create a CdIcc object from an EDID blob (Richard Hughes) |
| 491 |
- libcolord: Add cd_icc_create_default() to use the default sRGB profile (Richard Hughes) |
| 492 |
- libcolord: Export cd_icc_utils_get_coverage() for comparing two profiles (Richard Hughes) |
| 493 |
- Set 'GAMUT_coverage(srgb)' when generating standard space profiles (Richard Hughes) |
| 494 |
|
| 495 |
Bugfixes: |
| 496 |
- Allow profiles to be added or removed when the device is not enabled (Richard Hughes) |
| 497 |
- Always return soft-add calibration profiles before soft-add EDID profiles (Richard Hughes) |
| 498 |
- Do not add fake metadata to avoid creating an empty dictionary (Richard Hughes) |
| 499 |
- Do not mix up device paths and device IDs in the documentation (Conley Moorhous) |
| 500 |
- Fix an error when building the print profiles (Richard Hughes) |
| 501 |
- Fix creation of the dummy sensor device (Richard Hughes) |
| 502 |
- Fix the AdobeRGB and WideGamutRGB gamma values (Richard Hughes) |
| 503 |
- Fix transposed bits for EDID red y (Florian Höch) |
| 504 |
- Fix up various vendor quirks (Florian Höch) |
| 505 |
- Fix warning when any test profile has an EDID source and no ICC file (Richard Hughes) |
| 506 |
- libcolord: Always calculate the fallback checksum when using CdIccStore (Richard Hughes) |
| 507 |
- libcolord: Do not assert on finalize if connecting to the profile failed (Richard Hughes) |
| 508 |
- Migrate from usb_id and usb_db to udev builtins usb_id and hwdb (Dmitrijs Ledkovs) |
| 509 |
- Show a warning for incorrect or extra command line arguments (Richard Hughes) |
| 510 |
- Use %ghost in the example spec file to avoid removing databases on upgrades (Richard Hughes) |
| 511 |
- Use the exact D50 whitepoint values (Richard Hughes) |
| 512 |
|
| 513 |
Version 1.1.1 |
| 514 |
~~~~~~~~~~~~~ |
| 515 |
Released: 2013-07-30 |
| 516 |
|
| 517 |
Notes: |
| 518 |
- This release bumps the soname of libcolord as long deprecated methods have |
| 519 |
finally been removed. Any programs that link against libcolord will have to |
| 520 |
be recompiled against this new version. |
| 521 |
- This unstable branch is full of new features and experimental code, and |
| 522 |
therefore this release should probably be restricted to non-stable distros. |
| 523 |
- The colord.conf file has been removed and features are now autodetected at |
| 524 |
runtime where possible or specified in configure. |
| 525 |
|
| 526 |
New Features: |
| 527 |
- Add a shim libcolordcompat library with some helpers for ArgyllCMS (Richard Hughes) |
| 528 |
- Add SystemVendor and SystemModel string properties to the main interface (Richard Hughes) |
| 529 |
- Add the sub-command import-profile to colormgr (Richard Hughes) |
| 530 |
- libcolord: Add cd_icc_save_data() so that we can set _ICC_PROFILE (Richard Hughes) |
| 531 |
- libcolord: Add cd_icc_save_default() to save a profile to the default location (Richard Hughes) |
| 532 |
- libcolord: Add functionality to set and get the profile characterization data (Richard Hughes) |
| 533 |
- libcolord: Add methods to create a profile using CdClient with a CdIcc object (Richard Hughes) |
| 534 |
- List the required parameters in the 'colormgr --help' output (Richard Hughes) |
| 535 |
- Remove the AlwaysUseXrandrName config option and auto-detect it at runtime (Richard Hughes) |
| 536 |
- Show the viewing conditions when dumping the ICC profile (Richard Hughes) |
| 537 |
|
| 538 |
Bugfixes: |
| 539 |
- Add a quirk for ThinkPads so that we show 'ThinkPad T510' rather than '4384BR2' (Richard Hughes) |
| 540 |
- Add CdIccStore to monitor directories of ICC profiles (Richard Hughes) |
| 541 |
- Add optional installed tests (Richard Hughes) |
| 542 |
- Allow colormgr to take an object path or an ID as input (Richard Hughes) |
| 543 |
- Allow the user to specify a non-qualified path when using FindProfileByFilename (Richard Hughes) |
| 544 |
- Allow using the key 'Filename' when using FindProfileByProperty (Richard Hughes) |
| 545 |
- Bump the lcms2 dep to 2.4 (Richard Hughes) |
| 546 |
- Correct a few translatable command descriptions for colormgr (Richard Hughes) |
| 547 |
- Do not always overwrite files when using cd-fix-profile (Richard Hughes) |
| 548 |
- Do not unconditionally enable BPC on the color transform (Richard Hughes) |
| 549 |
- Fix ‘created’ time for non-UTC timezones again (Christopher James Halse Rogers) |
| 550 |
- Fix GObject introspection when getting lists and metadata (Richard Hughes) |
| 551 |
- libcolord: Always return the error if any sync method failed (Richard Hughes) |
| 552 |
- libcolord: Set an instance GError when lcms does the error callback (Richard Hughes) |
| 553 |
- libcolord: Work around a bug in cmsSaveProfileToMem() (Richard Hughes) |
| 554 |
- Remove deprecated API and bump the soname (Richard Hughes) |
| 555 |
- Remove the ICC volume searching functionality as it is not effective (Richard Hughes) |
| 556 |
- Remove the now-unused /etc/colord.conf (Richard Hughes) |
| 557 |
- Remove the StandardSpaces configure option (Richard Hughes) |
| 558 |
- Remove the UseSANE config option (Richard Hughes) |
| 559 |
- session-helper: Record the gamma table in the error message (Richard Hughes) |
| 560 |
- Update the colormgr man page to reflect reality (Richard Hughes) |
| 561 |
- Use an autogenerated device-id in the daemon self-test code (Richard Hughes) |
| 562 |
- Use the GLib functions for converting USC4<->UTF-8 (Richard Hughes) |
| 563 |
|
| 564 |
Version 1.0.0 |
| 565 |
~~~~~~~~~~~~~ |
| 566 |
Released: 2013-05-13 |
| 567 |
|
| 568 |
New Features: |
| 569 |
- Add a config option for monitors with identical EDID values (Richard Hughes) |
| 570 |
- Add API to control the use of BPC in CdTransform (Richard Hughes) |
| 571 |
- Add a simple BGRA32 pixel format (Richard Hughes) |
| 572 |
- Add a simple CMYK32 pixel format (Richard Hughes) |
| 573 |
- Add a simple colord.conf manpage (Richard Hughes) |
| 574 |
- Allow a different input and output format in CdTransform (Richard Hughes) |
| 575 |
- Show all the translations when dumping an ICC profile (Richard Hughes) |
| 576 |
|
| 577 |
Bugfixes: |
| 578 |
- Add some missing G_BEGIN_DECLS/G_END_DECLS in header files (Richard Hughes) |
| 579 |
- Always return an error if cd_main_device_add() failed (Richard Hughes) |
| 580 |
- Build all installed binaries with PIE (Richard Hughes) |
| 581 |
- Build the colord binary with full RELRO (Richard Hughes) |
| 582 |
- Do not show a warning when using 'colormgr device-get-profile-for-qualifier' (Richard Hughes) |
| 583 |
- Ensure the parent directories exist when calling cd_icc_save_file (Richard Hughes) |
| 584 |
- Fix crash in cd-iccdump by working around an lcms2 bug (Richard Hughes) |
| 585 |
- Fix using the ColorHug color sensor on ARM hardware (Richard Hughes) |
| 586 |
- Fix using the Huey color sensor on ARM hardware (Richard Hughes) |
| 587 |
- Set the STANDARD_space metadata for the print profiles (Richard Hughes) |
| 588 |
- Use G_GNUC_WARN_UNUSED_RESULT in public and private headers (Richard Hughes) |
| 589 |
- Use the same pixel format names as Cairo and the same in-memory value as lcms2 (Richard Hughes) |
| 590 |
|
| 591 |
Version 0.1.34 |
| 592 |
~~~~~~~~~~~~~~ |
| 593 |
Released: 2013-05-01 |
| 594 |
|
| 595 |
New Features: |
| 596 |
- Add a ICC transform object for simple RGB conversions (Richard Hughes) |
| 597 |
- Add an example for using CdIcc in applications (Richard Hughes) |
| 598 |
- Add an internal program to scan a directory of ICC profiles for warnings (Richard Hughes) |
| 599 |
- Add a warning for RGB profiles with unlikely whitepoint values (Richard Hughes) |
| 600 |
- Add a webservice URI example that can upload a profile to the Internet (Richard Hughes) |
| 601 |
- Add device metadata OutputEdidMd5 so we can build a UCMM shim layer (Richard Hughes) |
| 602 |
- Add functionality to return the response of the CdIcc profile object (Richard Hughes) |
| 603 |
- Add getting and setting the VCGT table in CdIcc (Richard Hughes) |
| 604 |
- Add new systemd macros to the example spec file (Václav Pavlín) |
| 605 |
- Add Qt DBus annotations (Daniel Nicoletti) |
| 606 |
|
| 607 |
Bugfixes: |
| 608 |
- Allow clients to call org.freedesktop.DBus.Peer (Richard Hughes) |
| 609 |
- Correct a lot more company names when creating devices (Richard Hughes) |
| 610 |
- Do not automatically add EDID profiles with warnings to devices (Richard Hughes) |
| 611 |
- Fix building RGB working space profiles when using OpenBSD/sparc64 (Stefan Sperling) |
| 612 |
- Fix standard-space property name into a compilable name (Daniel Nicoletti) |
| 613 |
- Increase the delay between patches in the session-helper (Richard Hughes) |
| 614 |
- Install the bash completion support into /usr (Richard Hughes) |
| 615 |
|
| 616 |
Version 0.1.33 |
| 617 |
~~~~~~~~~~~~~~ |
| 618 |
Released: 2013-04-16 |
| 619 |
|
| 620 |
Notes: |
| 621 |
- This release is is designed for stable distros. There are quite a few nice |
| 622 |
bugfixes and also quite a few new translations for all the generated profiles. |
| 623 |
|
| 624 |
New Features: |
| 625 |
- Add some profile descriptions for the CMYK profiles (Richard Hughes) |
| 626 |
- Add the FOGRA45L and FOGRA47L CMYK profiles (Richard Hughes) |
| 627 |
- Include the eciRGBv1 gamma 1.8 profile (Richard Hughes) |
| 628 |
- libcolord: Add cd_it8_set_enable_created (Richard Hughes) |
| 629 |
- libcolord: Add helpers for int and double values from the DOM (Richard Hughes) |
| 630 |
|
| 631 |
Bugfixes: |
| 632 |
- Add ifdef for cmsGetToneCurveEstimatedTableEntries (Richard Hughes) |
| 633 |
- Build the print profiles from XML descriptions (Richard Hughes) |
| 634 |
- Check the generated CCMX matrix for invalid data (Richard Hughes) |
| 635 |
- Do not print a warning if the DBus property does not exist (Richard Hughes) |
| 636 |
- Ensure mbstowcs() has an LC_CTYPE of 'en_US.UTF-8' (Richard Hughes) |
| 637 |
- libcolord: Always write C-locale floating point values in IT8 files (Richard Hughes) |
| 638 |
- libcolord: Initialize the value of the CCMX matrix (Richard Hughes) |
| 639 |
- libcolord: Return the correct result from cd_mat33_matrix_multiply (Richard Hughes) |
| 640 |
- Never promote localized v2 ICC profiles to v4 (Richard Hughes) |
| 641 |
- Rename ISOnewspaper26 to IFRA26S_2004_newsprint (Richard Hughes) |
| 642 |
|
| 643 |
Version 0.1.32 |
| 644 |
~~~~~~~~~~~~~~ |
| 645 |
Released: 2013-03-28 |
| 646 |
|
| 647 |
Notes: |
| 648 |
- This release is really for the translators. Now that the ICC profiles have |
| 649 |
translatable generic names and also short descriptions we can get to work |
| 650 |
creating some really great profiles. |
| 651 |
- Most commits for this release were for the translated profile feature, so |
| 652 |
feel free to skip this and wait for 0.1.33 if you're waiting for juicy new |
| 653 |
features or specific bugfixes. |
| 654 |
|
| 655 |
New Features: |
| 656 |
- Add a new tool 'cd-iccdump' that can dump V4 and V2 profiles (Richard Hughes) |
| 657 |
- Add translated descriptions to the ICC profiles (Richard Hughes) |
| 658 |
- libcolord: Add an object which is a named colord (Richard Hughes) |
| 659 |
- libcolord: Add an object to factor out the profile load and save (Richard Hughes) |
| 660 |
- libcolord: Add a really simple XML DOM extractor (Richard Hughes) |
| 661 |
- libcolord: Add some helpers for dealing with CdColorLab objects (Richard Hughes) |
| 662 |
- Translate some of the profile source XML file descriptions and licences (Richard Hughes) |
| 663 |
- Use an XML source format for the generated profiles (Richard Hughes) |
| 664 |
|
| 665 |
Bugfixes: |
| 666 |
- libcolord: Correctly copy CdColorYxy->Y when used as a property (Richard Hughes) |
| 667 |
- lib: Fix the licence boilerplate in the sensor libs (Richard Hughes) |
| 668 |
- Set the default profile locale to be en_US, not EN_us (Richard Hughes) |
| 669 |
- Use gtkdocize --copy in autogen.sh (Christopher James Halse Rogers) |
| 670 |
|
| 671 |
Version 0.1.31 |
| 672 |
~~~~~~~~~~~~~~ |
| 673 |
Released: 2013-03-18 |
| 674 |
|
| 675 |
New Features: |
| 676 |
- Add more sensor capabilities to support the latest ArgyllCMS release (Richard Hughes) |
| 677 |
- Calculate the display calibration based on the Lab and target display gamma (Richard Hughes) |
| 678 |
- Emulate a perfect sRGB screen when returning XYZ values from the dummy sensor (Richard Hughes) |
| 679 |
- Interpolate the gamma data to the VCGT size using Akima (Richard Hughes) |
| 680 |
- libcolord: Add Akima and Linear 2D interpolation classes (Richard Hughes) |
| 681 |
- libcolord: Switch CdColor to using the GSlice allocator (Richard Hughes) |
| 682 |
- libcolorhug: Add commands to get the ADC Vref+ and Vref- (Richard Hughes) |
| 683 |
- libcolorhug: Add extensions to the take_reading_x() commands to set the sensor type (Richard Hughes) |
| 684 |
- libcolorhug: Add the ability to get and set the CCD calibration values (Richard Hughes) |
| 685 |
- libcolorhug: Add the ability to get a spectral reading from the device (Richard Hughes) |
| 686 |
- Run the self test programs in 'make check' under valgrind (Richard Hughes) |
| 687 |
|
| 688 |
Bugfixes: |
| 689 |
- Add a warning if compiling with --with-daemon-user=root (Richard Hughes) |
| 690 |
- Add some more display vendor names to the display fixup table (Richard Hughes) |
| 691 |
- Deprecate both the cd_profile_set_$foo_sync() functions (Richard Hughes) |
| 692 |
- Do not show a critical warning if an unmatched sensor is connected (Richard Hughes) |
| 693 |
- Fix build on OpenBSD (Antoine Jacoutot) |
| 694 |
- Fix compile with --disable-gusb (Richard Hughes) |
| 695 |
- Fix the argyll sensor driver when using the ColorMunki Smile (Richard Hughes) |
| 696 |
- Fix the gamut warning to check primaries wider than CIERGB and ProPhoto (Richard Hughes) |
| 697 |
- Fix unusual crash in cd_main_get_cmdline_for_pid (Christopher James Halse Rogers) |
| 698 |
- Guess the option type when using 'colormgr sensor-set-options' (Richard Hughes) |
| 699 |
- libcolord: ArgyllCMS uses 'YES' for IT8 options (Richard Hughes) |
| 700 |
- libcolord: Fix two small memory leaks when getting details about a sensor (Richard Hughes) |
| 701 |
- Move the private sensor libraries out of the pure lib space (Dominique Leuenberger) |
| 702 |
- Rename the colormgr 'profile-set-$foo' commands to 'profile-set-property' (Richard Hughes) |
| 703 |
- Return an error if the client tries to change the profile filename after creation (Richard Hughes) |
| 704 |
- Set the target gamma when using the session-helper (Richard Hughes) |
| 705 |
- Setup the devices for another embedded Huey colorimeter and the original Spyder (Richard Hughes) |
| 706 |
|
| 707 |
Version 0.1.30 |
| 708 |
~~~~~~~~~~~~~~ |
| 709 |
Released: 2013-02-17 |
| 710 |
|
| 711 |
New Features: |
| 712 |
- Load the instrospection to the colord binary as a GResource (Richard Hughes) |
| 713 |
- Save the common ICC profiles as GResources in the colord binary to reduce I/O (Richard Hughes) |
| 714 |
- Support setting the blue LED in the ColorHug Spectro (Richard Hughes) |
| 715 |
|
| 716 |
Bugfixes: |
| 717 |
- Append -private to the driver libraries as they have no headers installed (Richard Hughes) |
| 718 |
- cd_sensor_get_caps() returns a bitfield, so make it explicitly 64 bits wide (Richard Hughes) |
| 719 |
- Do not expect a system proxy when checking if the daemon exists (Richard Hughes) |
| 720 |
- Do not remove the database files when upgrading the package (Richard Hughes) |
| 721 |
- Do not show duplicate profiles when icc-profiles-openicc is installed (Richard Hughes) |
| 722 |
- Fix Colord-1.0.gir build with --no-add-needed (Christopher James Halse Rogers) |
| 723 |
- Fix linking of ch-self-test (Martin Pitt) |
| 724 |
- Fix symbol-prefix passed to g-ir-scanner (Evan Nemerson) |
| 725 |
- Fix up the model name for the ColorMunki (Richard Hughes) |
| 726 |
- Skip more self tests if the daemon could not be started (Richard Hughes) |
| 727 |
|
| 728 |
Version 0.1.29 |
| 729 |
~~~~~~~~~~~~~~ |
| 730 |
Released: 2013-02-04 |
| 731 |
|
| 732 |
New Features: |
| 733 |
- Add an interface for plugins to decline to load (Christopher James Halse Rogers) |
| 734 |
- Add a --verbose and --version argument to colormgr (Richard Hughes) |
| 735 |
- Add DTP94 native sensor support (Richard Hughes) |
| 736 |
- Add the 'Plasma' sensor capability (Richard Hughes) |
| 737 |
- Allow profiles to have a 'score' which affects the standard space (Richard Hughes) |
| 738 |
- Detect profiles from adobe.com and color.org and add metadata (Richard Hughes) |
| 739 |
- Install libdtp94 for access to the DTP94 colorimeter (Richard Hughes) |
| 740 |
- Install libhuey for access to the Huey colorimeter (Richard Hughes) |
| 741 |
- Install libmunki for access to the ColorMunki Photo hardware (Richard Hughes) |
| 742 |
- Move libcolorhug from colorhug-client for access to the ColorHug colorimeter (Richard Hughes) |
| 743 |
- Reintroduce SANE support (Christopher James Halse Rogers) |
| 744 |
- session-helper: Return extra data from the calibration in the Finished signal (Richard Hughes) |
| 745 |
- session-helper: Return the correct sensor images when calibrating (Richard Hughes) |
| 746 |
|
| 747 |
Bugfixes: |
| 748 |
- Allow the user to specify the device type when using 'colormgr create-device' (Richard Hughes) |
| 749 |
- Change the Adobe RGB description to be 'Compatible with Adobe RGB (1998)' (Richard Hughes) |
| 750 |
- Do not auto-add profiles due to device-id metadata if they have been manually removed (Richard Hughes) |
| 751 |
- Do not include the size of the NULL byte when writing data from CCMX files (Richard Hughes) |
| 752 |
- Do not log a critical warning if the daemon is replaced at runtime (Richard Hughes) |
| 753 |
- Do not make the libsystemd-login dep automatic (Richard Hughes) |
| 754 |
- Do not return an error if a user manually adds a profile that has already been automatically added (Richard Hughes) |
| 755 |
- Don't emit a warning if the profile warnings or owner changes (Richard Hughes) |
| 756 |
- Ensure profiles with MAPPING_device_id get auto-added to devices (Richard Hughes) |
| 757 |
- Fix timezone problem in colord_client_random_func test (Christopher James Halse Rogers) |
| 758 |
- Include cd-buffer.c in libcolordprivate for future use (Richard Hughes) |
| 759 |
- Make libcolord/device_async test pass everywhere (Christopher James Halse Rogers) |
| 760 |
- Return an error if a client tries to create a device of an unknown type (Richard Hughes) |
| 761 |
- Set the additional 'OwnerCmdline' metadata on each device (Richard Hughes) |
| 762 |
- Show all the possible capabilities on one line when doing 'colormgr get-sensors' (Richard Hughes) |
| 763 |
- Specify the sensor caps in the code for native sensors (Richard Hughes) |
| 764 |
- Split the libcolord.so into libcolordprivate.so so it can be used without a GObject dep (Richard Hughes) |
| 765 |
- Write the CdIt8 'CREATED' date string in all files (Richard Hughes) |
| 766 |
|
| 767 |
Version 0.1.28 |
| 768 |
~~~~~~~~~~~~~~ |
| 769 |
Released: 2013-01-16 |
| 770 |
|
| 771 |
New Features: |
| 772 |
- Add some default GSetting schema values for the calibration helper (Richard Hughes) |
| 773 |
- Add a Sensor.Metadata property (Richard Hughes) |
| 774 |
- Add the sensor images as metadata on the D-Bus interface (Richard Hughes) |
| 775 |
|
| 776 |
Bugfixes: |
| 777 |
- Quit the session helper if the device or sensor was not found (Richard Hughes) |
| 778 |
- Never build more than one print profile at a time (Richard Hughes) |
| 779 |
- Don't use the deprecated INCLUDES in Makefile.am (Richard Hughes) |
| 780 |
|
| 781 |
Version 0.1.27 |
| 782 |
~~~~~~~~~~~~~~ |
| 783 |
Released: 2013-01-08 |
| 784 |
|
| 785 |
New Features: |
| 786 |
- Add ColorMunki Smile defines and calibration attach image (Richard Hughes) |
| 787 |
- Add Spyder4 calibration attach image (Richard Hughes) |
| 788 |
- Add the ability to generate Rec. 709 gamma curves (Richard Hughes) |
| 789 |
- Export a Device.Embedded property that is set for fixed hardware (Richard Hughes) |
| 790 |
- Import shared-color-profiles into colord (Richard Hughes) |
| 791 |
- Install a header with all the session helper defines (Richard Hughes) |
| 792 |
- Support L* gamma encoding in cd-create-profile (Richard Hughes) |
| 793 |
- Write the profile quality into to the .icc file as metadata (Richard Hughes) |
| 794 |
|
| 795 |
Bugfixes: |
| 796 |
- Allow passing no value as properties to CreateDevice (Richard Hughes) |
| 797 |
- Do not return zero profiles when the device is being calibrated or disabled (Richard Hughes) |
| 798 |
- Ensure the color types are methods in GObject Introspection rather than functions (Richard Hughes) |
| 799 |
- Fix build when srcdir != builddir (Colin Walters) |
| 800 |
- Fix floating point number parsing in non C locale environments (Richard Hughes) |
| 801 |
- Remove 'Monitor' suffix from display devices model string (Richard Hughes) |
| 802 |
|
| 803 |
Version 0.1.26 |
| 804 |
~~~~~~~~~~~~~~ |
| 805 |
Released: 2012-12-19 |
| 806 |
|
| 807 |
New Features: |
| 808 |
- Add 4 more defined sensor types (Richard Hughes) |
| 809 |
- Add a create-temperature subcommand to colormgr to test VCGT generation (Richard Hughes) |
| 810 |
- Add a 'SensorId' property to the sensor interface (Richard Hughes) |
| 811 |
- Add a session helper that can be used to calibrate the screen (Richard Hughes) |
| 812 |
- Add cd_it8_save_to_data() to save the data to some allocated memory (Richard Hughes) |
| 813 |
- Add FindSensorById() to the main interface (Richard Hughes) |
| 814 |
- Add some defines for the Spyder4 display colorimeter (John (J5) Palmieri) |
| 815 |
- Add some device figures from gnome-color-manager used in KDE and GNOME (Richard Hughes) |
| 816 |
- Add some example calibration ti1 files from gnome-color-manager (Richard Hughes) |
| 817 |
- Add support for reading and writing .cal files to CdIt8 (Richard Hughes) |
| 818 |
- Add the ability to 'disable' a device so that color management can be turned off (Richard Hughes) |
| 819 |
- Export cd_color_rgb_interpolate() as it's useful to applications (Richard Hughes) |
| 820 |
- Recognise the internal sensor on W700 laptops and set a property for the calibration tools (Richard Hughes) |
| 821 |
- Use spotread when there is no native sensor driver (Richard Hughes) |
| 822 |
|
| 823 |
Bugfixes: |
| 824 |
- Add some missing entries in cd_sensor_kind_from_string (John (J5) Palmieri) |
| 825 |
- Create ICCv2 profiles when using cd-create-profile (Richard Hughes) |
| 826 |
- Do 3 reads in quick succession for colormgr get-sensor-reading (Richard Hughes) |
| 827 |
- Fix a crash when saving a ti3 file where white is not the last sample (Richard Hughes) |
| 828 |
- Fix a critical warning when writing using cd_it8_add_data() with no XYZ value (Richard Hughes) |
| 829 |
- If ti1 values are > 1.0 then assume they are normalized (Richard Hughes) |
| 830 |
- Return class specific error codes if authentication fails (Richard Hughes) |
| 831 |
- Scale the ti3 RGB values to 100 when writing with NORMALIZED_TO_Y_100 (Richard Hughes) |
| 832 |
- Set DEVICE_CLASS when saving a cal IT8 file (Richard Hughes) |
| 833 |
- Support doing sensor user actions when using 'colormgr get-sensor-reading' (Richard Hughes) |
| 834 |
- Update the device scope if it changes at runtime (Richard Hughes) |
| 835 |
- Use enumerated error values in the client library (Richard Hughes) |
| 836 |
|
| 837 |
Version 0.1.25 |
| 838 |
~~~~~~~~~~~~~~ |
| 839 |
Released: 2012-11-16 |
| 840 |
|
| 841 |
New Features: |
| 842 |
- Add a create-standard-space sub-command to cd-create-profile (Richard Hughes) |
| 843 |
- Add a FAQ entry describing application support of color management (Richard Hughes) |
| 844 |
- Add a 'make coverity' helper to scan the project for errors (Richard Hughes) |
| 845 |
- Add a profile metadata key of 'License' (Richard Hughes) |
| 846 |
- Add a profile warning if any of the primaries are outside of ROMM RGB (Richard Hughes) |
| 847 |
- Add a set-version command to the cd-fix-profile command line tool (Richard Hughes) |
| 848 |
- Add a warning if the profile calibration data is non-monotonic (Richard Hughes) |
| 849 |
- Add a warning if the profile copyright is missing (Richard Hughes) |
| 850 |
- Add a warning if the profile description is missing (Richard Hughes) |
| 851 |
- Add a warning if the profile gray axis is invalid (Richard Hughes) |
| 852 |
- Add a warning if the profile primaries are invalid (Richard Hughes) |
| 853 |
- Add a warning if the profile primaries do not add to D50 (Richard Hughes) |
| 854 |
- Add a warning if the profile RGB 255,255,255 does not return D50 (Richard Hughes) |
| 855 |
- Add a warning if the profile would produce a scum-dot (Richard Hughes) |
| 856 |
- Add a 'Warnings' property to the DBus interface for each profile (Richard Hughes) |
| 857 |
- Add OutputPriority device metadata key to the specification (Richard Hughes) |
| 858 |
- Move the named color examples to shared-color-profiles (Richard Hughes) |
| 859 |
- Print if the profile is system-wide when doing 'colormgr get-profiles' (Richard Hughes) |
| 860 |
- Show the primaries when dumping the profile using cd-fix-profile (Richard Hughes) |
| 861 |
- Use syslog to be able to debug what the daemon is doing without restarting it (Richard Hughes) |
| 862 |
|
| 863 |
Bugfixes: |
| 864 |
- Check the return value of mbstowcs before using the buffer (Richard Hughes) |
| 865 |
- Convert cd-create-profile to using sub-commands to make it more modular (Richard Hughes) |
| 866 |
- Create linear vcgt tables when using create-x11-gamma to match the xserver behaviour (Richard Hughes) |
| 867 |
- Create version 2.2 ICC files when creating named color profiles (Richard Hughes) |
| 868 |
- Do not ever manually set a ICC profile version when creating profiles (Richard Hughes) |
| 869 |
- Do not try to connect to colord in cd-fix-profile until actually needed (Richard Hughes) |
| 870 |
- Don't optimize the profile check transforms to speed up daemon startup (Richard Hughes) |
| 871 |
- Don't set the StandardSpaces override, the generated profiles have the correct metadata now (Richard Hughes) |
| 872 |
- Fix a crash in the example code if the device has a non-standard qualifier format (Richard Hughes) |
| 873 |
- Fix GetStandardSpace so it can actually work (Richard Hughes) |
| 874 |
- huey: Ensure we return an error if we ran out of retries (Richard Hughes) |
| 875 |
- If the copyright string is not set when creating a profile use a good default (Richard Hughes) |
| 876 |
- Improve the formatting of 'get-profiles' and 'get-devices' (Richard Hughes) |
| 877 |
- libcolord: Fix up a warning if GetStandardSpace fails to find a profile (Richard Hughes) |
| 878 |
- Return an error if the client does not set a profile or device id (Richard Hughes) |
| 879 |
- Return an error if the client uses an unsupported scope value (Richard Hughes) |
| 880 |
- Set a default copyright string when creating profiles without using --copyright (Richard Hughes) |
| 881 |
|
| 882 |
Version 0.1.24 |
| 883 |
~~~~~~~~~~~~~~ |
| 884 |
Released: 2012-10-26 |
| 885 |
|
| 886 |
New Features: |
| 887 |
- Add a extract-vcgt subcommand to cd-fix-profile (Richard Hughes) |
| 888 |
- Add a general plugin interface for adding and removing devices (Richard Hughes) |
| 889 |
- Add defines for the 'ColorHug Spectro' hardware (Richard Hughes) |
| 890 |
- Add a 'seat' property to each device (Richard Hughes) |
| 891 |
- Add FindProfileByProperty() to the main interface (Richard Hughes) |
| 892 |
- Allow the user to specify a custom udev rules directory (Richard Hughes) |
| 893 |
|
| 894 |
Bugfixes: |
| 895 |
- Append usernames to dbus object paths before sanitising the object path (Christopher James Halse Rogers) |
| 896 |
- colorhug: Add support for firmware >= 1.2.0 by accepting a full HID buffer (Richard Hughes) |
| 897 |
- colorhug: Update the private files to the latest libcolorhug code (Richard Hughes) |
| 898 |
- Fix a critical warning when user tries to dump a non-icc file (Richard Hughes) |
| 899 |
- Fix automatic dep on libusb (Pacho Ramos) |
| 900 |
- Fix automatic dep on vala (Pacho Ramos) |
| 901 |
- Fix a warning in the daemon if a device property is NULL at setup (Richard Hughes) |
| 902 |
- Initialise global connection variable earlier (Christopher James Halse Rogers) |
| 903 |
- More paranoia in construction of object paths (Christopher James Halse Rogers) |
| 904 |
- Never use Werror by default in configure (Richard Hughes) |
| 905 |
- Remove libsane support and rely only on udev for scanner device information (Richard Hughes) |
| 906 |
- Set FILE_checksum on discovered system profiles (Richard Hughes) |
| 907 |
- Set the seat for devices created in the session and from udev (Richard Hughes) |
| 908 |
|
| 909 |
Version 0.1.23 |
| 910 |
~~~~~~~~~~~~~~ |
| 911 |
Released: 2012-08-29 |
| 912 |
|
| 913 |
New Features: |
| 914 |
- Get udevrulesdir from pkg-config (Benedikt Morbach) |
| 915 |
|
| 916 |
Bugfixes: |
| 917 |
- Assorted documentation fixes (Evan Nemerson) |
| 918 |
- Do not try to add duplicate sysfs devices (Richard Hughes) |
| 919 |
|
| 920 |
Version 0.1.22 |
| 921 |
~~~~~~~~~~~~~~ |
| 922 |
Released: 2012-06-27 |
| 923 |
|
| 924 |
New Features: |
| 925 |
- Add a Vala version of cd-gtk-demo (Evan Nemerson) |
| 926 |
- Split out colord-gtk to a new sub-project to prevent a dep loop (Richard Hughes) |
| 927 |
|
| 928 |
Bugfixes: |
| 929 |
- Add many generic introspection type arguments (Evan Nemerson) |
| 930 |
- Check any files in /usr/share/color/icc have the content type application/vnd.iccprofile (Richard Hughes) |
| 931 |
- Do not try to create the same object paths if two sensors of the same type are plugged in (Richard Hughes) |
| 932 |
- Fix the udev rules entry for the i1Display3 (Wolfgang Goetz) |
| 933 |
|
| 934 |
Version 0.1.21 |
| 935 |
~~~~~~~~~~~~~~ |
| 936 |
Released: 2012-05-22 |
| 937 |
|
| 938 |
Bugfixes: |
| 939 |
- Do not add sensors that are ignored or have no caps (Richard Hughes) |
| 940 |
- Do not install any parts of colord-sane if --disable-sane is specified (Christoph Brill) |
| 941 |
- Do not use 'WantedBy=graphical.target' in the shipped systemd file (Benedikt Morbach) |
| 942 |
- Fix autotools when configuring without systemd (Benedikt Morbach) |
| 943 |
- Fix InstallSystemWide() by not writing a private file (Richard Hughes) |
| 944 |
- Fix srcdir != builddir with introspection enabled (Colin Walters) |
| 945 |
- Fix the description in the systemd service file (Benedikt Morbach) |
| 946 |
- Isolate gtk dependency to cd-convert (Yanko Kaneti) |
| 947 |
- Save the CCMX and ITx files to be compatible with argyllcms (Richard Hughes) |
| 948 |
- The ColorHug has a new VID and PID (Richard Hughes) |
| 949 |
|
| 950 |
Version 0.1.20 |
| 951 |
~~~~~~~~~~~~~~ |
| 952 |
Released: 2012-05-09 |
| 953 |
|
| 954 |
New Features: |
| 955 |
- Add a bash completion file for colormgr (Richard Hughes) |
| 956 |
- Add a BUSY state value for sensor devices (Richard Hughes) |
| 957 |
- Add a GObject Introspection example (Richard Hughes) |
| 958 |
- Add a sensor-set-options command to the colormgr tool (Richard Hughes) |
| 959 |
- Add async and sync methods in libcolord to support sensor options (Richard Hughes) |
| 960 |
- Add CdIt8 as a helper for reading and writing ti1, ti3 and ccmx files (Richard Hughes) |
| 961 |
- Add cd_it8_utils_calculate_ccmx() to libcolorhug (Richard Hughes) |
| 962 |
- Add CdSampleWindow to libcolord-gtk (Richard Hughes) |
| 963 |
- Add CdWindow which allows us to get the color profile for a GtkWidget (Richard Hughes) |
| 964 |
- Add functionality to colord-convert to sample ti1 -> ti3 files (Richard Hughes) |
| 965 |
- Add gio-2.0 to the requires line of colord.pc for GFile (Richard Hughes) |
| 966 |
- Add the concept of 'options' on each color sensor device (Richard Hughes) |
| 967 |
- colorhug: Allow saving the remote hash as a sensor option (Richard Hughes) |
| 968 |
- Print any sensor options when doing 'colormgr get-sensors' (Richard Hughes) |
| 969 |
|
| 970 |
Bugfixes: |
| 971 |
- colorhug: Save the EEPROM after setting sensor options (Richard Hughes) |
| 972 |
- Enable gtk-doc in the default distro build (Richard Hughes) |
| 973 |
- Fix build failure when colord is not installed system-wide (Craig Keogh) |
| 974 |
|
| 975 |
Version 0.1.19 |
| 976 |
~~~~~~~~~~~~~~ |
| 977 |
Released: 2012-04-17 |
| 978 |
|
| 979 |
New Features: |
| 980 |
- Add a user suffix to the object path of user-created devices and profiles (Richard Hughes) |
| 981 |
|
| 982 |
Bugfixes: |
| 983 |
- Add User key to colord-sane's DBus service file (Christopher James Halse Rogers) |
| 984 |
- Do not enable PrivateNetwork=yes as it breaks hotplugging devices (Richard Hughes) |
| 985 |
- Ensure colord-sane can create devices and profiles (Christopher James Halse Rogers) |
| 986 |
- Fix usage of CD_OBJECT_SCOPE_* enums (John Sheu) |
| 987 |
- Honor aclocal flags (Craig Keogh) |
| 988 |
- Remove the 'Default,' profile title prefix if legacy profiles are installed (Richard Hughes) |
| 989 |
|
| 990 |
Version 0.1.18 |
| 991 |
~~~~~~~~~~~~~~ |
| 992 |
Released: 2012-03-15 |
| 993 |
|
| 994 |
New Features: |
| 995 |
- Add a Manager.CreateProfileWithFd() method for QtDBus (Richard Hughes) |
| 996 |
- Add the GAMUT_coverage metadata key to the spec (Richard Hughes) |
| 997 |
- Add the GAMUT_volume metadata key to the spec (Richard Hughes) |
| 998 |
- Depend on lcms2 >= 2.2 (Richard Hughes) |
| 999 |
- Make cd-fix-profile add the GAMUT keys to the ICC file (Richard Hughes) |
| 1000 |
- Split out the SANE support into it's own process (Richard Hughes) |
| 1001 |
|
| 1002 |
Bugfixes: |
| 1003 |
- Do not delete 'disk' or 'normal' devices when the session exits (Richard Hughes) |
| 1004 |
- Ensure we return NULL for missing device properties (Richard Hughes) |
| 1005 |
- Fix a small leak when creating devices and profiles in clients (Richard Hughes) |
| 1006 |
- Fix cd-fix-profile to add and remove metadata entries (Richard Hughes) |
| 1007 |
- Install per-machine profiles in /var/lib/colord/icc (Richard Hughes) |
| 1008 |
- Show what DBus names have inhibited each device (Richard Hughes) |
| 1009 |
- When doing 'get-devices' show the profile ID and filename (Richard Hughes) |
| 1010 |
|
| 1011 |
Version 0.1.17 |
| 1012 |
~~~~~~~~~~~~~~ |
| 1013 |
Released: 2012-02-22 |
| 1014 |
|
| 1015 |
New Features: |
| 1016 |
- Add an LED sample type (Richard Hughes) |
| 1017 |
- Add a metadata key to store the calibration brightness (Richard Hughes) |
| 1018 |
- Show the profile title when using colormgr get-profiles (Richard Hughes) |
| 1019 |
|
| 1020 |
Bugfixes: |
| 1021 |
- Add PrivateNetwork and PrivateTmp to the systemd service file (Richard Hughes) |
| 1022 |
- Don't leak a GVariantIter when setting the device metadata (Richard Hughes) |
| 1023 |
- Fix a critical warning if a client tries to get the profile metadata (Matthias Clasen) |
| 1024 |
- Fix InstallSystemWide() when running as the colord user (Richard Hughes) |
| 1025 |
- Increase the colorhug sample timeout to 5 seconds (Richard Hughes) |
| 1026 |
- Make underscores into spaces for the profile title (Richard Hughes) |
| 1027 |
- Return from cd_profile_has_access() with TRUE for virtual profiles (Richard Hughes) |
| 1028 |
|
| 1029 |
Version 0.1.16 |
| 1030 |
~~~~~~~~~~~~~~ |
| 1031 |
Released: 2012-01-17 |
| 1032 |
|
| 1033 |
New Features: |
| 1034 |
- Add a device-inhibit command to the colormgr client (Richard Hughes) |
| 1035 |
- Add org.freedesktop.policykit.owner annotations to .policy file (Vincent Untz) |
| 1036 |
- Add profile metadata MAPPING_device_id for automatic profile mapping (Richard Hughes) |
| 1037 |
- Add some profile metadata keys discussed with Florian Höch (Richard Hughes) |
| 1038 |
- Install a systemd service file if systemd is used (Benedikt Morbach) |
| 1039 |
- Support 2nd generation Huey hardware (Richard Hughes) |
| 1040 |
- Use GUsb for the Huey sensor (Richard Hughes) |
| 1041 |
|
| 1042 |
Bugfixes: |
| 1043 |
- Fix a Wformat error when printing a gsize (Richard Hughes) |
| 1044 |
- If /usr/share/color appears at runtime, don't rescan the parent dir (Richard Hughes) |
| 1045 |
- Set the colorimeter sensor group so the dameon can access the sensor (Richard Hughes) |
| 1046 |
- Split the spyder hardware into different types (Richard Hughes) |
| 1047 |
|
| 1048 |
Version 0.1.15 |
| 1049 |
~~~~~~~~~~~~~~ |
| 1050 |
Released: 2011-11-26 |
| 1051 |
|
| 1052 |
Notes: |
| 1053 |
- This release fixes an important security bug: CVE-2011-4349. |
| 1054 |
- It is recommended all users update to this version, or backport |
| 1055 |
these patches: |
| 1056 |
* http://gitorious.org/colord/master/commit/1fadd90afcb4bbc47513466ee9bb1e4a8632ac3b |
| 1057 |
* http://gitorious.org/colord/master/commit/36549e0ed255e7dfa7852d08a75dd5f00cbd270e |
| 1058 |
|
| 1059 |
New Features: |
| 1060 |
- Add a native driver for the Hughski ColorHug hardware (Richard Hughes) |
| 1061 |
- Export cd-math as three projects are now using it (Richard Hughes) |
| 1062 |
|
| 1063 |
Bugfixes: |
| 1064 |
- Documentation fixes and improvements (Laurent Martelli) |
| 1065 |
- Do not crash the daemon if adding the device to the db failed (Richard Hughes) |
| 1066 |
- Do not match any sensor device with a kernel driver (Richard Hughes) |
| 1067 |
- Don't be obscure when the user passes a device-id to colormgr (Richard Hughes) |
| 1068 |
- Fix a memory leak when getting properties from a device (Richard Hughes) |
| 1069 |
- Fix colormgr device-get-default-profile (Richard Hughes) |
| 1070 |
- Fix some connection bugs in colormgr (Florian Höch, Richard Hughes) |
| 1071 |
- Fix some potential SQL injections (Ludwig Nussel, Vincent Untz) |
| 1072 |
- Make gusb optional (Ludwig Nussel) |
| 1073 |
- Only use the udev USB helper if the PID and VID have matches (Richard Hughes) |
| 1074 |
- Output the Huey calibration matrices when dumping the sensor (Richard Hughes) |
| 1075 |
|
| 1076 |
Version 0.1.14 |
| 1077 |
~~~~~~~~~~~~~~ |
| 1078 |
Released: 2011-11-01 |
| 1079 |
|
| 1080 |
Translations: |
| 1081 |
New Features: |
| 1082 |
- Add defines for the i1 Display 3 (Richard Hughes) |
| 1083 |
- Add two more DATA_source values to the specification (Richard Hughes) |
| 1084 |
- Align the output from colormgr get-devices and get-profiles (Richard Hughes) |
| 1085 |
- Allow cd-fix-profile to append and edit new metadata (Richard Hughes) |
| 1086 |
|
| 1087 |
Bugfixes: |
| 1088 |
- Ensure non-native device are added with no driver module (Richard Hughes) |
| 1089 |
- Split the sensor and device udev code (Richard Hughes) |
| 1090 |
|
| 1091 |
Version 0.1.13 |
| 1092 |
~~~~~~~~~~~~~~ |
| 1093 |
Released: 2011-10-03 |
| 1094 |
|
| 1095 |
New Features: |
| 1096 |
- Add an 'Owner' property on device and profile objects (Richard Hughes) |
| 1097 |
- Add cd_profile_has_access() to filter profiles from other user accounts (Richard Hughes) |
| 1098 |
- Add the crayon named color palette (Richard Hughes) |
| 1099 |
- Add --xorg-gamma to cd-create-profile to create custom gamma ramps (Richard Hughes) |
| 1100 |
|
| 1101 |
Bugfixes: |
| 1102 |
- Add a note in the naming specification about the username suffix (Richard Hughes) |
| 1103 |
- colormgr only needs one argument for find-device (Richard Hughes) |
| 1104 |
- Ensure remote DBus errors are registered at startup (Richard Hughes) |
| 1105 |
- Ensure uid 0 can always create devices and profiles (Richard Hughes) |
| 1106 |
- Fix an error in configure if there is no sane .pc file (Richard Hughes) |
| 1107 |
- Fix the --disable-polkit build (Richard Hughes) |
| 1108 |
- Fix up the docs; cd_device_get_modified() returns microseconds (Richard Hughes) |
| 1109 |
- Reduce the CPU load of clients when assigning profiles from the session (Richard Hughes) |
| 1110 |
- Return an error if a client tries to create a duplicate device (Richard Hughes) |
| 1111 |
- Return an error when trying to register a duplicate profile (Richard Hughes) |
| 1112 |
|
| 1113 |
Version 0.1.12 |
| 1114 |
~~~~~~~~~~~~~~ |
| 1115 |
Released: 2011-08-30 |
| 1116 |
|
| 1117 |
New Features: |
| 1118 |
- Add a configure argument --enable-volume-search (Richard Hughes) |
| 1119 |
- Add a configure argument of --enable-fd-fallback (Richard Hughes) |
| 1120 |
- Add cd_client_import_profile() to be able to easily import a GFile (Richard Hughes) |
| 1121 |
- Allow the daemon to run with a different user (Richard Hughes) |
| 1122 |
|
| 1123 |
Bugfixes: |
| 1124 |
- Add daemon user to acl of sensor devices (Christopher James Halse Rogers) |
| 1125 |
- Add lcms2 to Requires.private (Richard Hughes) |
| 1126 |
- Check if a file is really an ICC profile before importing it (Richard Hughes) |
| 1127 |
- Detect libusb_strerror in configure rather than relying on the version (Richard Hughes) |
| 1128 |
- Do not fail make check if there is no available local colord process to use (Richard Hughes) |
| 1129 |
- Ensure the profiles are sorted by their timestamp during login (Richard Hughes) |
| 1130 |
- Ensure the volume-sourced profiles are not marked as systemwide profiles (Richard Hughes) |
| 1131 |
- Exit with an error when trying to connect to a device that does not exist (Richard Hughes) |
| 1132 |
- Remove duplicate call to complete in libcolord (Alban Browaeys) |
| 1133 |
- Try harder to use the ICC profile checksum (Richard Hughes) |
| 1134 |
|
| 1135 |
Version 0.1.11 |
| 1136 |
~~~~~~~~~~~~~~ |
| 1137 |
Released: 2011-08-01 |
| 1138 |
|
| 1139 |
Translations: |
| 1140 |
- Updated Russian translation (Alexandre Prokoudine) |
| 1141 |
|
| 1142 |
New Features: |
| 1143 |
- Enable GObject introspection generation on libcolord (Richard Hughes) |
| 1144 |
- Generate a Vala API binding from the GObject Introspection GIR (Richard Hughes) |
| 1145 |
- Move the project home to freedesktop.org (Richard Hughes) |
| 1146 |
- Ship generated man pages in tarballs (Vincent Untz) |
| 1147 |
|
| 1148 |
Bugfixes: |
| 1149 |
- Add all of the required GObject Introspection annotations required (Richard Hughes) |
| 1150 |
- Allow FindDeviceByProperty() to match on model, vendor and serial number (Richard Hughes) |
| 1151 |
- Don't crash the example program if there is no default profile assigned (Richard Hughes) |
| 1152 |
- Fix the bugzilla and mailing list links on the webpage. Fixes #39129 (Richard Hughes) |
| 1153 |
- Fix the licence headers in colord.h and cd-color.h (Richard Hughes) |
| 1154 |
- Fix up some translatable strings (Richard Hughes) |
| 1155 |
- Honor ACLOCAL_FLAGS when running autoreconf (Owen W. Taylor) |
| 1156 |
- Use the const formatter when unwrapping GVariants to reduce memory allocation (Richard Hughes) |
| 1157 |
|
| 1158 |
Version 0.1.10 |
| 1159 |
~~~~~~~~~~~~~~ |
| 1160 |
Released: 2011-07-06 |
| 1161 |
|
| 1162 |
New Features: |
| 1163 |
- Add a find-profile-by-filename command to the colormgr client tool (Richard Hughes) |
| 1164 |
- Add the object scope to the DBus interface as a property (Richard Hughes) |
| 1165 |
- Write a document detailing the colord security attack surface (Richard Hughes) |
| 1166 |
|
| 1167 |
Bugfixes: |
| 1168 |
- Actually store the device ID in the mapping database (Richard Hughes) |
| 1169 |
- Fix include statements to search from current libcolord folder (Kenny Stuart) |
| 1170 |
- Fix mbstowcs usage (Colin Walters) |
| 1171 |
- Fix the build for old versions of lcms2 (Stef Walter) |
| 1172 |
- Fix up the location of the libcolord header files (Richard Hughes) |
| 1173 |
- Remove the DBus annotations in the introspection (Richard Hughes) |
| 1174 |
|
| 1175 |
Version 0.1.9 |
| 1176 |
~~~~~~~~~~~~~ |
| 1177 |
Released: 2011-06-13 |
| 1178 |
|
| 1179 |
New Features: |
| 1180 |
- Add a 'Format' property to the device interface (Richard Hughes) |
| 1181 |
- Add a new method Client:FindDeviceByProperty for when only a property is known (Richard Hughes) |
| 1182 |
- Add methods to get the connected state of each object (Richard Hughes) |
| 1183 |
- Define the DATA_source profile metadata item (Richard Hughes) |
| 1184 |
- Define three metadata keys for the framework creator to set (Richard Hughes) |
| 1185 |
- Define two keys to allow the profile to contain the mapping parameters (Richard Hughes) |
| 1186 |
|
| 1187 |
Bugfixes: |
| 1188 |
- Allow GUDEV to be disabled at compile time (Richard Hughes) |
| 1189 |
- Autodetect SANE in configure (Richard Hughes) |
| 1190 |
- Fix 3 small memory leaks (Richard Hughes) |
| 1191 |
- Fix a bug that caused a critical warning in client code (Richard Hughes) |
| 1192 |
- Only warn if we fail to get the PolicyKit authority (Richard Hughes) |
| 1193 |
- Save any additional disk device metadata in the property database (Richard Hughes) |
| 1194 |
- Use upstream gettext instead the glib one (Javier Jardón) |
| 1195 |
- Write the new metadata entries in the utility programs (Richard Hughes) |
| 1196 |
|
| 1197 |
Version 0.1.8 |
| 1198 |
~~~~~~~~~~~~~ |
| 1199 |
Released: 2011-06-02 |
| 1200 |
|
| 1201 |
Translations: |
| 1202 |
- Add Japanese translation (Ryo Fujita) |
| 1203 |
|
| 1204 |
New Features: |
| 1205 |
- Add a 'Created' property to the Profile interface (Richard Hughes) |
| 1206 |
- Add an basic ColorMunki native sensor driver (Richard Hughes) |
| 1207 |
- Add an explicit 'webcam' device kind (Richard Hughes) |
| 1208 |
- Add a timestamp when making profiles default (Richard Hughes) |
| 1209 |
- Add support for reading and writing ICC profile metadata (Richard Hughes) |
| 1210 |
- Allow the client to pass file descriptors out of band to CreateProfile (Richard Hughes) |
| 1211 |
- Manually remove the date from profiles to make them look nicer in the GUI (Richard Hughes) |
| 1212 |
- Prettify the device vendor and model names (Richard Hughes) |
| 1213 |
- Split out the sensors into runtime-loadable shared objects (Richard Hughes) |
| 1214 |
- libcolord: Add a cd_device_kind_to_profile_kind() utility function (Richard Hughes) |
| 1215 |
- libcolord: Add preprocessor defines for the device and profile property and metadata names (Richard Hughes) |
| 1216 |
- libcolord: Add some simple helpers to check objects for equality (Richard Hughes) |
| 1217 |
- libcolord: Add the helper function cd_profile_get_age() (Richard Hughes) |
| 1218 |
- libcolord: Provide some GIO async variants for the methods in CdClient (Richard Hughes) |
| 1219 |
|
| 1220 |
Bugfixes: |
| 1221 |
- Allow setting the 'Colorspace' property on profile objects (Richard Hughes) |
| 1222 |
- Bump glib requirement to 2.28 in configure.ac (Adrien Bustany) |
| 1223 |
- Do not return a 4-double triple for Sensor.GetSample() (Richard Hughes) |
| 1224 |
- Do not try to register a second identical instance of a device on the bus (Richard Hughes) |
| 1225 |
- Ensure empty strings are specially parsed as NULL (Richard Hughes) |
| 1226 |
- Ensure GPhoto2 devices get added to the device list (Richard Hughes) |
| 1227 |
- Fix the gtk-doc build (Richard Hughes) |
| 1228 |
- If the user tries to register a second identical profile don't return an error (Richard Hughes) |
| 1229 |
- Simplify vendor cleanup code (Bastien Nocera) |
| 1230 |
- Use the FILE_checksum metadata for profiles created without internal checksums (Richard Hughes) |
| 1231 |
- When creating a device with an existing virtual device promote it to a physical device (Richard Hughes) |
| 1232 |
|
| 1233 |
Version 0.1.7 |
| 1234 |
~~~~~~~~~~~~~ |
| 1235 |
Released: 2011-05-06 |
| 1236 |
|
| 1237 |
New Features: |
| 1238 |
- Add sensor-lock to just lock the color sensor and listen for events |
| 1239 |
|
| 1240 |
Bugfixes: |
| 1241 |
- Create /var/lib/colord at buildtime not runtime for SELinux |
| 1242 |
- Ensure profiles with embedded profile checksums are parsed correctly |
| 1243 |
- Move the colorimeter rules to be run before 70-acl.rules |
| 1244 |
- Stop watching the client when the sensor is finalized |
| 1245 |
- Ensure the source is destroyed when we unref CdUsb to prevent a crash |
| 1246 |
- Only enable the volume mount tracking when searching volumes |
| 1247 |
|
| 1248 |
Version 0.1.6 |
| 1249 |
~~~~~~~~~~~~~ |
| 1250 |
Released: 2011-04-24 |
| 1251 |
|
| 1252 |
Notes: |
| 1253 |
- Sensor devices are now being managed by colord to make calibration a |
| 1254 |
nicer experience in the desktop. At the moment only taking spot |
| 1255 |
colors is supported, and only the huey driver is available. |
| 1256 |
- Applications can now request profiles for standard color spaces such |
| 1257 |
as sRGB, AdobeRGB and ProPhotoRGB. |
| 1258 |
- Lots of system performance improvements, but be sure to use g-c-m |
| 1259 |
from git for the fastest session startup. |
| 1260 |
|
| 1261 |
New Features: |
| 1262 |
- Add 3 tools for reverse engineering the huey colorimeter |
| 1263 |
- Add a DBus interface designed so normal users can use color sensors |
| 1264 |
- Add a dummy sensor object that is enabled if 'CreateDummySensor' is set |
| 1265 |
- Add an async version of CdClient:Connect() |
| 1266 |
- Add a --verbose command line option to print the debugging in color |
| 1267 |
- Add CdColor to libcolord so we have some reusable GTypes to use |
| 1268 |
- Add cd-create-profile, which provides a way to build a NCP |
| 1269 |
- Add GetStandardSpace to the DBus API |
| 1270 |
- Add support for sensor devices in libcolord |
| 1271 |
- Add get-sensors and get-sensor-reading commands to the colormgr tool |
| 1272 |
- Add the native Huey sensor driver which is taken from gnome-color-manager |
| 1273 |
- Add two options to colord: --timed-exit and --immediate-exit |
| 1274 |
- Import the sensor udev rules file from gnome-color-manager |
| 1275 |
- Move gcm-fix-profile from GNOME Color Manager as cd-fix-profile |
| 1276 |
- Update the architecture plan to include sensor devices |
| 1277 |
|
| 1278 |
Bugfixes: |
| 1279 |
- Do not emit a critical warning if ID_MODEL doesn't exist for a device |
| 1280 |
- Remove any .icc suffix automatically from the encoded profile title |
| 1281 |
- Return an error if the user tries to create a persistent profile |
| 1282 |
- The DTP92 cannot profile LCDs, according to Graeme |
| 1283 |
- Use cmsOpenProfileFromFile() rather than getting the complete profile content |
| 1284 |
- Use the embedded profile-id if it is available, else fallback to the file MD5 |
| 1285 |
- Use the FILE_checksum metadata if it is available to speed up session startup |
| 1286 |
|
| 1287 |
Version 0.1.5 |
| 1288 |
~~~~~~~~~~~~~ |
| 1289 |
Released: 2011-03-31 |
| 1290 |
|
| 1291 |
New Features: |
| 1292 |
- Add a 'Metadata' property to the device object |
| 1293 |
- Draft a specification document for device and profile IDs |
| 1294 |
- Draft specification document explaining the metadata keys we're using |
| 1295 |
- Remove colorgui as gnome-color-manager and kolord will be sufficient |
| 1296 |
|
| 1297 |
Bugfixes: |
| 1298 |
- Add AC_PROG_LIBTOOL to configure.ac to prevent a warning in jhbuild |
| 1299 |
- Correct the spelling of colorimetric in the public API |
| 1300 |
- Enable the sane support by default, Simple Scan needs this |
| 1301 |
- Make any properties not understood by colord to be saved as metadata keys |
| 1302 |
- Mark some more strings as translatable in colormgr |
| 1303 |
|
| 1304 |
Version 0.1.4 |
| 1305 |
~~~~~~~~~~~~~ |
| 1306 |
Released: 2011-03-09 |
| 1307 |
|
| 1308 |
Translations: |
| 1309 |
- Added Russian translation (Alexandre Prokoudine) |
| 1310 |
|
| 1311 |
New Features: |
| 1312 |
- Add Device.GetProfileRelation() so we can get the profile to device relationship type (Richard Hughes) |
| 1313 |
- Add Profile.Format so CUPS can tell us the qualifier format (Richard Hughes) |
| 1314 |
- Do not coldplug SANE devices unless UseSANE=true (Richard Hughes) |
| 1315 |
- Do not search external volumes unless SearchVolumes=true (Richard Hughes) |
| 1316 |
|
| 1317 |
Bugfixes: |
| 1318 |
- Clear the cached profiles and devices if the daemon is restarted (Richard Hughes) |
| 1319 |
- Only add local SANE devices to colord (Richard Hughes) |
| 1320 |
- Remove the 'Other CMS frameworks' from the website sources (Richard Hughes) |
| 1321 |
- Replace underscores with spaces when getting the model and vendor from SANE (Richard Hughes) |
| 1322 |
- Set a generic RGB profile qualifier if there is nothing already set (Richard Hughes) |
| 1323 |
- Use plain text enumerated values in CreateDevice and CreateProfile (Richard Hughes) |
| 1324 |
|
| 1325 |
Version 0.1.3 |
| 1326 |
~~~~~~~~~~~~~ |
| 1327 |
Released: 2011-02-28 |
| 1328 |
|
| 1329 |
New Features: |
| 1330 |
- Add a architecture diagram how colord is going to work with printing (Richard Hughes) |
| 1331 |
- Add a 'relation' parameter to Device.AddProfile() (Richard Hughes) |
| 1332 |
- Add cd-dbus-use-qualifier as an example of how to use a qualifier using DBus (Richard Hughes) |
| 1333 |
- Add FindProfileByFilename() to the main DBus interface (Richard Hughes) |
| 1334 |
- Add gtk-doc support to libcolord (Richard Hughes) |
| 1335 |
- Add the EDID_md5 metadata from profiles created by GCM with lcms (Richard Hughes) |
| 1336 |
|
| 1337 |
Bugfixes: |
| 1338 |
- Do not emit PropertyChanged on a profile when not yet added (Richard Hughes) |
| 1339 |
- Do not return dummy data if an ICC file has no metadata (Richard Hughes) |
| 1340 |
- Ensure profile IDs with slashes are escaped (Richard Hughes) |
| 1341 |
- Ensure the Device.Profiles property returns no results when profiling (Richard Hughes) |
| 1342 |
- Logically, GetProfileForQualifier(*) matches anything (Richard Hughes) |
| 1343 |
- Modify GetProfileForQualifiers() so we can send multiple requests (Richard Hughes) |
| 1344 |
- Never call DeviceChanged before DeviceAdded when adding properties (Richard Hughes) |
| 1345 |
- Only add 'hard' devices to the mapping database (Richard Hughes) |
| 1346 |
- Return the 'hard' profiles before the 'soft' profiles (Richard Hughes) |
| 1347 |
- Send a Device::Changed signal when a device is being calibrated (Richard Hughes) |
| 1348 |
- Use a custom qualifier matcher, as g_regex_match_simple() is expensive (Richard Hughes) |
| 1349 |
|
| 1350 |
Version 0.1.2 |
| 1351 |
~~~~~~~~~~~~~ |
| 1352 |
Released: 2011-02-07 |
| 1353 |
|
| 1354 |
New Features: |
| 1355 |
- Add a 'Colorspace' property to all profile devices (Richard Hughes) |
| 1356 |
- Add a dictionary of properties to the CreateX() methods (Richard Hughes) |
| 1357 |
- Add a 'HasVcgt' property to all profile devices (Richard Hughes) |
| 1358 |
- Add a 'IsSystemWide' property to the profile interface (Richard Hughes) |
| 1359 |
- Add a 'Metadata' property to the profile object for the DICT ICC tag (Richard Hughes) |
| 1360 |
- Add a 'Mode' property to each device (Richard Hughes) |
| 1361 |
- Add an example to show how to use colord without using libcolord (Richard Hughes) |
| 1362 |
- Add async helpers to get the device and profile arrays (Richard Hughes) |
| 1363 |
- Add CdClient ::profile-added and ::profile-removed signals (Richard Hughes) |
| 1364 |
- Add cd_device_remove_profile_sync() (Richard Hughes) |
| 1365 |
- Add the website to revision control (Richard Hughes) |
| 1366 |
- Refactor out colormgr into a useful command line tool (Richard Hughes) |
| 1367 |
- Remove the 'Commit' API -- with properties we don't need this (Richard Hughes) |
| 1368 |
- When a device or profile changes, emit a signal on the base interface (Richard Hughes) |
| 1369 |
|
| 1370 |
Bugfixes: |
| 1371 |
- If available, use the profile file checksum in the DBus object (Richard Hughes) |
| 1372 |
- Replace underscores with spaces for the UDev model and vendor properties (Richard Hughes) |
| 1373 |
- Set the colorspace on V4L devices (Richard Hughes) |
| 1374 |
|
| 1375 |
Version 0.1.1 |
| 1376 |
~~~~~~~~~~~~~ |
| 1377 |
Released: 2011-01-26 |
| 1378 |
|
| 1379 |
Notes: |
| 1380 |
- A small break in the DBus API this release: Commit() has been added. |
| 1381 |
- Many new properties are available on the interfaces. |
| 1382 |
- SANE and v4linux UDEV devices are now added as colord devices. |
| 1383 |
- The persistent storage code has been written so device and profiles |
| 1384 |
get auto-assigned when they appear. |
| 1385 |
- Be sure to rebuild the 'icc' branches of CUPS and gnome-color-manager |
| 1386 |
if you're trying out the new functionality. |
| 1387 |
|
| 1388 |
New Features: |
| 1389 |
- Add a commit method to the device and profile objects (Richard Hughes) |
| 1390 |
- Add a database for storing the device to profile mappings (Richard Hughes) |
| 1391 |
- Add a /etc/colord.conf file for future usage (Richard Hughes) |
| 1392 |
- Add a GetProfilesByKind() DBus method (Richard Hughes) |
| 1393 |
- Add a method to set a profile system-wide for all users (Richard Hughes) |
| 1394 |
- Add a modification time to the remote Device object (Richard Hughes) |
| 1395 |
- Add and remove UDEV devices as colord devices (Richard Hughes) |
| 1396 |
- Add a simple architecture plan of colord (Richard Hughes) |
| 1397 |
- Add cd_device_get_default_profile() client side method (Richard Hughes) |
| 1398 |
- Add devices and profiles prefixes to the DBus paths (Richard Hughes) |
| 1399 |
- Add methods to the daemon to allow device profiling (Richard Hughes) |
| 1400 |
- Add SANE devices as color managed devices (Richard Hughes) |
| 1401 |
- Add three more device properties: Serial, Vendor and Colorspace (Richard Hughes) |
| 1402 |
- Calculate the checksum of the parsed ICC file (Richard Hughes) |
| 1403 |
- Save 'disk' scope devices to a system-wide database (Richard Hughes) |
| 1404 |
- Track per-system profile stores (Richard Hughes) |
| 1405 |
|
| 1406 |
Bugfixes: |
| 1407 |
- Actually emit the CdClient::DeviceAdded signal (Richard Hughes) |
| 1408 |
- Actually emit the CdClient::DeviceRemoved signal (Richard Hughes) |
| 1409 |
- Don't print a blank line in colormgr if there is no qualifier (Richard Hughes) |
| 1410 |
- Make DeleteDevice take an ID, not an object (Richard Hughes) |
| 1411 |
- Make PolicyKit support optional to fix the build on Windows (Richard Hughes) |
| 1412 |
- Profiles do not have a created property, so don't try to display one (Richard Hughes) |
| 1413 |
|
| 1414 |
Version 0.1.0 |
| 1415 |
~~~~~~~~~~~~~ |
| 1416 |
Released: 2011-01-13 |
| 1417 |
|
| 1418 |
Notes: |
| 1419 |
- Colord is a simple system activated daemon that maps devices to color |
| 1420 |
profiles. |
| 1421 |
- It is used by gnome-color-manager for CUPS integration and is also |
| 1422 |
used when there are no users logged in. |
| 1423 |
- The only real user at the moment is CUPS, but GNOME Color Manager |
| 1424 |
will start depending on colord when it is included in most mainstream |
| 1425 |
distributions. |
| 1426 |
- The DBus interface is not set in stone, and the libcolord library |
| 1427 |
will have new API added to it as required. If colord needs to break |
| 1428 |
public API at this stage for a specific use case, it will. |
| 1429 |
- The persistent storage code is not written yet, but that will come |
| 1430 |
with the next colord version. |
| 1431 |
|
| 1432 |
New Features: |
| 1433 |
- Add a 'Kind' attribute to the device objects (Richard Hughes) |
| 1434 |
- Add a libcolord shared library that can be used in the client tools (Richard Hughes) |
| 1435 |
- Add an example spec file (Richard Hughes) |
| 1436 |
- Add a simple colormgr man page (Richard Hughes) |
| 1437 |
- Add a simple GTK test GUI for testing the DBus interfaces (Richard Hughes) |
| 1438 |
- Add a simple script to create a test device (Richard Hughes) |
| 1439 |
- Add basic DBus interface (Richard Hughes) |
| 1440 |
- Add code for the DeleteDevice method (Richard Hughes) |
| 1441 |
- Add DeleteProfile() on the main interface (Richard Hughes) |
| 1442 |
- Add GetProfileForQualifier() code (Richard Hughes) |
| 1443 |
- Add MakeProfileDefault() implementation to CdDevice (Richard Hughes) |
| 1444 |
- Add qualifiers to profiles (Richard Hughes) |
| 1445 |
- Allow clients to set properties on the objects using SetProperty (Richard Hughes) |
| 1446 |
- Expose the device created time (Richard Hughes) |
| 1447 |
- Fixed typo in ColorManager API description (Tim Waugh) |
| 1448 |
- Open the profile using lcms2 after we set the profile filename (Richard Hughes) |
| 1449 |
- Provide a method to assign an ICC profile to a profile object (Richard Hughes) |
| 1450 |
- Provide methods for mapping the device ID to the object path (Richard Hughes) |
| 1451 |
- Use seporate PolicyKit authorisations for each action type (Richard Hughes) |