| 1 |
/*==================================================================== |
| 2 |
* Project: Board Support Package (BSP) |
| 3 |
* Developed using: |
| 4 |
* Function: register description for Freescale MPC5200 |
| 5 |
* |
| 6 |
* Copyright HighTec EDV-Systeme GmbH 1982-2006 |
| 7 |
*====================================================================*/ |
| 8 |
|
| 9 |
#ifndef __MPC5200_H__ |
| 10 |
#define __MPC5200_H__ |
| 11 |
|
| 12 |
|
| 13 |
/* general register definition macro */ |
| 14 |
#define __REG32(x) ((volatile unsigned int *)(x)) |
| 15 |
#define __REG16(x) ((volatile unsigned short *)(x)) |
| 16 |
#define __REG8(x) ((volatile unsigned char *)(x)) |
| 17 |
|
| 18 |
/* Reset value is 0x80000000; pcm030.cfg maps MBAR to this new address */ |
| 19 |
#define MBAR_BASE 0xF0000000 |
| 20 |
|
| 21 |
/* Internal Register Memory Map */ |
| 22 |
#define MM_BASE (MBAR_BASE + 0x0000) /* Memory Map Registers */ |
| 23 |
#define SDRAM_BASE (MBAR_BASE + 0x0100) /* SDRAM Memory Controller Registers */ |
| 24 |
#define CDM_BASE (MBAR_BASE + 0x0200) /* Clock Distribution Module Registers */ |
| 25 |
#define CSC_BASE (MBAR_BASE + 0x0300) /* Chip Select Controller Registers */ |
| 26 |
#define ICTL_BASE (MBAR_BASE + 0x0500) /* Interrupt Controller Registers */ |
| 27 |
#define GPT_BASE (MBAR_BASE + 0x0600) /* General Purpose Timer Registers */ |
| 28 |
#define SLT_BASE (MBAR_BASE + 0x0700) /* Slice Time Registers */ |
| 29 |
#define RTC_BASE (MBAR_BASE + 0x0800) /* Real-Time Clock Registers */ |
| 30 |
#define CAN_BASE (MBAR_BASE + 0x0900) /* MSCAN Registers */ |
| 31 |
#define GPS_BASE (MBAR_BASE + 0x0B00) /* GPIO Standard Registers */ |
| 32 |
#define GPW_BASE (MBAR_BASE + 0x0C00) /* GPIO Wakeup Registers */ |
| 33 |
#define PCI_BASE (MBAR_BASE + 0x0D00) /* PCI XLB Registers */ |
| 34 |
#define SPI_BASE (MBAR_BASE + 0x0F00) /* Serial Peripheral Interface Registers */ |
| 35 |
#define USB_BASE (MBAR_BASE + 0x1000) /* Universal Serial Bus Registers */ |
| 36 |
#define BDMA_BASE (MBAR_BASE + 0x1200) /* BestComm DMA Registers */ |
| 37 |
#define BDLC_BASE (MBAR_BASE + 0x1300) /* J1850 (BDLC) Registers */ |
| 38 |
#define XLARB_BASE (MBAR_BASE + 0x1F00) /* XL BUS ARBITRATION Registers */ |
| 39 |
#define PSC1_BASE (MBAR_BASE + 0x2000) /* Programmable Serial Controller 1 Registers */ |
| 40 |
#define PSC2_BASE (MBAR_BASE + 0x2200) /* Programmable Serial Controller 2 Registers */ |
| 41 |
#define PSC3_BASE (MBAR_BASE + 0x2400) /* Programmable Serial Controller 3 Registers */ |
| 42 |
#define PSC4_BASE (MBAR_BASE + 0x2600) /* Programmable Serial Controller 4 Registers */ |
| 43 |
#define PSC5_BASE (MBAR_BASE + 0x2800) /* Programmable Serial Controller 5 Registers */ |
| 44 |
#define PSC6_BASE (MBAR_BASE + 0x2C00) /* Programmable Serial Controller 6 Registers */ |
| 45 |
#define ETH_BASE (MBAR_BASE + 0x3000) /* Ethernet Registers */ |
| 46 |
#define BPCI_BASE (MBAR_BASE + 0x3800) /* BestComm DMA PCI Registers */ |
| 47 |
#define ATA_BASE (MBAR_BASE + 0x3A00) /* Advanced Technology Attachment Registers */ |
| 48 |
#define BLPC_BASE (MBAR_BASE + 0x3C00) /* BestComm DMA LocalPlus Registers */ |
| 49 |
#define IIC_BASE (MBAR_BASE + 0x3D00) /* Inter-Integrated Circuit Registers */ |
| 50 |
|
| 51 |
#define SRAM_BASE (MBAR_BASE + 0x8000) /* On-chip Static RAM Memory Locations */ |
| 52 |
#define SRAM_SIZE 0x4000 /* On-chip Static RAM Memory size */ |
| 53 |
|
| 54 |
|
| 55 |
/* Clock Distribution Module Register */ |
| 56 |
#define CDM_JTAGID __REG32(CDM_BASE + 0x0000) /* JTAG ID Number Register (RO) */ |
| 57 |
#define CDM_PORCFG __REG32(CDM_BASE + 0x0004) /* Power On Reset Configuration Register */ |
| 58 |
#define CDM_CFG __REG32(CDM_BASE + 0x000C) /* Configuration Register */ |
| 59 |
#define CDM_48_FDC __REG32(CDM_BASE + 0x0010) /* 48MHz Fractional Divider Configuration Register */ |
| 60 |
#define CDM_CER __REG32(CDM_BASE + 0x0014) /* Clock Enable Register */ |
| 61 |
#define CDM_SRESET __REG32(CDM_BASE + 0x0020) /* Soft Reset Register */ |
| 62 |
|
| 63 |
|
| 64 |
/* Interrupt Controller Register (see mpc52xx_irq.h) */ |
| 65 |
|
| 66 |
|
| 67 |
|
| 68 |
/* Slice Timers */ |
| 69 |
#define SLT0_TCR __REG32(SLT_BASE + 0x0000) /* Timer 0 Terminal Count Register */ |
| 70 |
#define SLT0_CR __REG32(SLT_BASE + 0x0004) /* Timer 0 Control Register */ |
| 71 |
#define SLT0_CVR __REG32(SLT_BASE + 0x0008) /* Timer 0 Count Value Register (RO) */ |
| 72 |
#define SLT0_TSR __REG32(SLT_BASE + 0x000C) /* Timer 0 Timer Status Register */ |
| 73 |
#define SLT1_TCR __REG32(SLT_BASE + 0x0010) /* Timer 1 Terminal Count Register */ |
| 74 |
#define SLT1_CR __REG32(SLT_BASE + 0x0014) /* Timer 1 Control Register */ |
| 75 |
#define SLT1_CVR __REG32(SLT_BASE + 0x0018) /* Timer 1 Count Value Register (RO) */ |
| 76 |
#define SLT1_TSR __REG32(SLT_BASE + 0x001C) /* Timer 1 Timer Status Register */ |
| 77 |
|
| 78 |
/* bits in Control Register */ |
| 79 |
#define SLT_CR_TE (1u << (31-7)) /* Timer Enable */ |
| 80 |
#define SLT_CR_IE (1u << (31-6)) /* Interrupt Enable */ |
| 81 |
#define SLT_CR_RW (1u << (31-5)) /* Run_Wait (1=Run,0=Wait) */ |
| 82 |
|
| 83 |
/* bits in Timer Status Register (only SLT1) */ |
| 84 |
#define SLT1_TSR_ST (1u << (31-7)) /* Status Timer: 1 = Terminal Count reached; write to clear interrupt */ |
| 85 |
|
| 86 |
|
| 87 |
/* GPIO Standard Registers */ |
| 88 |
#define GPIO_GPS_PCR __REG32(GPS_BASE + 0x00) /* Port Configuration Register */ |
| 89 |
|
| 90 |
/* GPIO Wakeup Registers */ |
| 91 |
#define GPIO_WKUP_ER __REG8(GPW_BASE + 0x00) /* GPIO WakeUp Enable Register */ |
| 92 |
#define GPIO_WKUP_ODE __REG8(GPW_BASE + 0x04) /* GPIO WakeUp Open Drain Emulation Register */ |
| 93 |
#define GPIO_WKUP_DDR __REG8(GPW_BASE + 0x08) /* GPIO WakeUp Data Direction Register */ |
| 94 |
#define GPIO_WKUP_DVOR __REG8(GPW_BASE + 0x0C) /* GPIO WakeUp Data Value Out Register */ |
| 95 |
|
| 96 |
|
| 97 |
|
| 98 |
#endif /* __MPC5200_H__ */ |