| 1 |
# |
| 2 |
# this is an example config for the stonith module apcmastersnmp |
| 3 |
# |
| 4 |
# 1. what does the fields on the line mean ? |
| 5 |
# |
| 6 |
# all parameters must be given on a single line. blank lines and lines |
| 7 |
# starting with '#' are ignored. only the first not ignored line will |
| 8 |
# be processed. all subsequent lines will be ignored. the different |
| 9 |
# fields must be seperated by white-spaces (blanks and/or tabs). |
| 10 |
# |
| 11 |
# the first field is the either the hostname or the ip address. the |
| 12 |
# hostname must be resolvable. the second fields specifies the snmp port |
| 13 |
# the masterswitch is listening. for snmp the default is 161. the last |
| 14 |
# field contains the so called 'community' string. this must be the same |
| 15 |
# as the one in the masterswitch configuration. |
| 16 |
# |
| 17 |
# |
| 18 |
# 2. how must the masterswitch be configured ? |
| 19 |
# |
| 20 |
# as said above, the community string must be set to the same value entered |
| 21 |
# in this config. the different outlets must be named after the connected |
| 22 |
# hosts. that means, the outlet names must be the same as the node names |
| 23 |
# in /etc/ha.d/ha.cf. the reset values should be set to reasonable values. |
| 24 |
# |
| 25 |
# the module DON'T configure the module in any way! |
| 26 |
# |
| 27 |
# |
| 28 |
# 3. how does the module work ? |
| 29 |
# |
| 30 |
# in case of a stonith the module receives the nodename of the host, which |
| 31 |
# should be reset. the module looks up this nodename in the list of outlet |
| 32 |
# names. that's why the names must be identical (see 2.). if it finds the |
| 33 |
# name, it'll reset the appropriate outlet using the configured values |
| 34 |
# (eg. delay, duration). then the module waits for the outlet to coming |
| 35 |
# up. if it comes up, a successful stonith will be reported back. otherwise |
| 36 |
# the stonith failed and a failure code will be returned. |
| 37 |
# |
| 38 |
|
| 39 |
192.168.1.110 161 private |