Debian Codegraph @

debian/patches/02_upstream_documents

raw
1 Add upstream documentation
2 --- /dev/null
3 +++ b/bootdisk.html
4 @@ -0,0 +1,548 @@
5 +<HTML>
6 +<HEAD>
7 +<TITLE>Offline NT pw & reg-editor, bootdisk</TITLE>
8 +</HEAD>
9 +<BODY link="#00687F" vlink="#00687F" alink="#00687F" bgcolor="#C0C0C0">
10 +<H2>Offline NT Password & Registry Editor, Bootdisk / CD</H2>
11 +<hr>
12 +<p>
13 +I've put together a single floppy or CD which contains
14 +things needed to edit the passwords on most systems.
15 +<br>
16 +<p>
17 +The bootdisk should support most of the more usual disk controllers.
18 +You most likely have to select "d" to auto-load the drivers, it should
19 +then detect PCI based hardware. For ISA hardware, you have to load manually.
20 +Both PS/2 and USB keyboard supported.
21 +<p>
22 +Tested on: NT 3.51, NT 4 (all versions and SPs), Windows 2000 (all
23 +versions & SPs), Windows XP (all versions, also SP2),
24 +Windows Server 2003 (all SPs), Vindows Vista 32 and 64 bit.
25 +<p>
26 +<STRONG>DANGER WILL ROBINSON!<br>
27 +If used on users that have EFS encrypted files, and the system is XP
28 +or Vista, all encrypted files for that user will be UNREADABLE!
29 +and cannot be recovered unless you remember the old
30 +password again</strong><small> If you don't know if you have encrypted files
31 +or not, you most likely don't have them. (except maybe on corporate systems)
32 +</small>
33 +<p>
34 +<b>Please see the <A HREF="faq.html">Frequently Asked Questions</A>
35 +and the version history below before emailing questions to me. Thanks!</b>
36 +<p>
37 +Also take a look at <A HREF="http://www.cgsecurity.org/" TARGET="_top">Grenier's DOS port</A>
38 +<p>
39 +<A HREF="http://www.jms1.net/nt-unlock.html" TARGET="_top">
40 +How to fix it</a> if you lost your admin password for your
41 +ActiveDirectory. Thanks to John Simpson.
42 +<p>
43 +Other ways to recover lost password etc at
44 +<a href="http://www.petri.co.il/forgot_administrator_password.htm" target="_top">MCSE World</a>
45 +<p>
46 +<hr>
47 +<H2>How to use?</H2>
48 +<small>Yes, long text. Please read it all and the <A
49 +HREF="faq.html">FAQ</A> before mailing me questions</small>
50 +<p>
51 +If you have the CD, all drivers are included. If you use the floppy,
52 +and you need the SCSI-drivers set, either prepare a floppy with
53 +the scsi-drivers .zip file unzipped (in \scsi), or put a selection
54 +of the drivers you need in the \scsi folder on the main floppy,
55 +there should be enough space for maybe a couple of drivers. In the latter
56 +case you don't need to carry around and swap floppies.
57 +<p>
58 +<H3>Overview</H3>
59 +<OL>
60 + <LI>Disk select, tell which disk contains the Windows system.
61 + Optionally you will have to load drivers.
62 + <LI>PATH select, where on the disk is the system?
63 + <LI>File select, which parts of registry to load, based on what you
64 + want to do.
65 + <LI>Password reset or other registry edit.
66 + <LI>Write back to disk (you will be asked)
67 +</OL>
68 +<B>DON'T PANIC!! - Most questions can usually be answered with the
69 +default answer which is given in [brackets]. Just press enter/return
70 +to accept the default answer.</b>
71 +<p>
72 +
73 +<H3>1. DISK SELECT</H3>
74 +Which disk contains your Windows system?
75 +<p>
76 +<pre>
77 +=========================================================
78 +. Step ONE: Select disk where the Windows installation is
79 +=========================================================
80 +Disks:
81 +Disk /dev/sda: 2147 MB, 2147483648 bytes
82 +NT partitions found:
83 + 1 : /dev/sda1 2043MB Boot
84 +
85 +Please select partition by number or
86 +a = show all partitions, d = automatically load new disk drivers
87 +m = manually load new disk drivers
88 +l = relist NTFS/FAT partitions, q = quit
89 +Select: [1]
90 +</pre>
91 +<UL>
92 +<li>For most machines only one disk and parition is listed, if so,
93 + just go with selection 1 (default)
94 +<li>Otherwise select partition
95 +<li>Note: When booting from USB drive, the USB drive itself may often
96 +show up as number 1 instead of the machines buildt in drives.
97 +<li>If no disks or not all disks are shown, you may need to load disk
98 +drivers, for SCSI-controllers (or some IDE-raid controllers). Select
99 +<b>d</b> to go to the driver select menu for auto-probe (based what's
100 +found on the PCI bus)
101 +<li>If auto-probe won't work, you may have to load something manually,
102 +select <b>m</b> to do that (like the old system)
103 +</Ul>
104 +
105 +<H3>2. HOW TO MANUALLY LOAD DRIVERS</H3>
106 +Try auto-probe (d) first, only do this if you have to manually
107 +try to load some or all drivers.
108 +<pre>
109 +Select: [1] m
110 +==== DISK DRIVER / SCSI DRIVER select ====
111 +You may now insert or swap to the SCSI-drivers floppy
112 +Press enter when done:
113 +Found 1 floppy drives
114 +Found only one floppy, using it..
115 +Selected floppy #0
116 +Mounting it..
117 +Floppy selection done..
118 +SCSI-drivers found on floppy:
119 +
120 +1 BusLogic.o.gz
121 +2 aic7xxx.o.gz
122 +3 sym53c8xx.o.gz
123 +[ ... ]
124 +
125 +SCSI driver selection:
126 + a - autoprobe for the driver (try all)
127 + s - swap driver floppy
128 + q - do not load more drivers
129 + or enter the number of the desired driver
130 +
131 +SCSI driver select: [q]
132 +</pre>
133 +<UL>
134 +<li>Select <b>a</b> for auto-probe, it will try to load all drivers,
135 +and stop when one loads properly. Some drivers may need more driver
136 +modules, so you may have to redo the auto-probe several times.
137 +<li>Or if you know what you want, just enter it's number or name.
138 +</ul>
139 +
140 +<pre>
141 +SCSI driver select: [q] a
142 +[ BusLogic.o.gz ]
143 +Using /tmp/scsi/BusLogic.o
144 +PCI: Found IRQ 11 for device 00:10.0
145 +
146 +[.... lots of driver / card info ...]
147 +
148 +scsi0: *** BusLogic BT-958 Initialized Successfully ***
149 +scsi0 : BusLogic BT-958
150 + Vendor: FooInc Model: MegaDiskFoo Rev: 1.0
151 + Type: Direct-Access ANSI SCSI revision: 02
152 +
153 +[ ... ]
154 +
155 +Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
156 +SCSI device sda: 8388608 512-byte hdwr sectors (4295 MB)
157 +Partition check:
158 + /dev/scsi/host0/bus0/target0/lun0: p1
159 +Driver BusLogic.o.gz loaded and initialized.
160 +
161 +</pre>
162 +<ul>
163 +<li>You may then quit the selection with <b>q</b> or try for more drivers.
164 +<li>When you quit, you will get back to the disk select (see above)
165 +and hopefully see more disks.
166 +</ul>
167 +<p>
168 +
169 +<H3>3. PATH AND FILE SELECT</H3>
170 +Where's the Windows system located?
171 +<p>
172 +On the selected partition/disk, the main files for windows can
173 +theoretically be anywhere. And we must find the registry files
174 +to be able to edit them. There are however some usual places:
175 +<ul>
176 +<li>winnt35/system32/config - Windows NT 3.51
177 +<li>winnt/system32/config - Windows NT 4 and Windows 2000
178 +<li>windows/system32/config - Windows XP/2003 and often Windows 2000
179 +upgraded from Windows 98 or earlier.
180 +</ul>
181 +These usual paths will be checked, and if found, they will
182 +be suggested as the default.
183 +<p>
184 +<pre>
185 +Selected 1
186 +Mounting on /dev/ide/host0/bus0/target0/lun0/part1
187 +NTFS volume version 3.1.
188 +Filesystem is: NTFS
189 +
190 +=========================================================
191 +. Step TWO: Select PATH and registry files
192 +=========================================================
193 +What is the path to the registry directory? (relative to windows disk)
194 +[windows/system32/config] :
195 +-r-------- 1 0 0 262144 Jan 12 18:01 SAM
196 +-r-------- 1 0 0 262144 Jan 12 18:01 SECURITY
197 +-r-------- 1 0 0 262144 Jan 12 18:01 default
198 +-r-------- 1 0 0 8912896 Jan 12 18:01 software
199 +-r-------- 1 0 0 2359296 Jan 12 18:01 system
200 +dr-x------ 1 0 0 4096 Sep 8 11:37 systemprofile
201 +-r-------- 1 0 0 262144 Sep 8 11:53 userdiff
202 +
203 +Select which part of registry to load, use predefined choices
204 +or list the files with space as delimiter
205 +1 - Password reset [sam system security]
206 +2 - RecoveryConsole parameters [software]
207 +q - quit - return to previous
208 +[1] :
209 +</pre>
210 +<ul>
211 +<li>If the directory is correct, something like the above will be
212 +listed (it may vary a bit..)
213 +<li>You may then choose some canned answers based on what you want to
214 +do.
215 +<li>Password reset is the default, and most used.
216 +<li>Option 2, RecoveryConsole is for setting 2 parameters that the
217 +Windows 2000 and newer RecoveryConsole (boot from CD, select Recovery
218 +and console mode) uses. One of the parameters allows RecoveryConsole
219 +to be run without it prompting for the admin password. If you do not
220 +know what RecoveryConsole is, don't bother. Or go search the net..
221 +<li>Or if you want to do manual edit of registry, select your hives to
222 +load. Enter all names on one line with space between.
223 +</ul>
224 +<p>
225 +We select 1 to edit passwords..
226 +<p>
227 +<H3>4. PASSWORD RESET</H3>
228 +Everything is set and ready, let's roll!
229 +<p>
230 +
231 +<pre>
232 +=========================================================
233 +. Step THREE: Password or registry edit
234 +=========================================================
235 +chntpw version 0.99.2 040105, (c) Petter N Hagen
236 +
237 +[.. some file info here ..]
238 +
239 +* SAM policy limits:
240 +Failed logins before lockout is: 0
241 +Minimum password length : 0
242 +Password history count : 0
243 +
244 +&lt;&gt;========&lt;&gt; chntpw Main Interactive Menu &lt;&gt;========&lt;&gt;
245 +
246 +Loaded hives: &lt;sam&gt; &lt;system&gt; &lt;security&gt;
247 +
248 + 1 - Edit user data and passwords
249 + 2 - Syskey status & change
250 + 3 - RecoveryConsole settings
251 + - - -
252 + 9 - Registry editor, now with full write support!
253 + q - Quit (you will be asked if there is something to save)
254 +
255 +
256 +What to do? [1] -&gt; 1
257 +
258 +===== chntpw Edit User Info & Passwords ====
259 +
260 +RID: 01f4, Username: &lt;Administrator&gt;
261 +RID: 01f5, Username: &lt;Guest&gt;, *disabled or locked*
262 +RID: 03e8, Username: &lt;HelpAssistant&gt;, *disabled or locked*
263 +RID: 03eb, Username: &lt;pnh&gt;, *disabled or locked*
264 +RID: 03ea, Username: &lt;SUPPORT_388945a0&gt;, *disabled or locked*
265 +
266 +Select: ! - quit, . - list users, 0x&lt;RID&gt; - User with RID (hex)
267 +or simply enter the username to change: [Administrator]
268 +</pre>
269 +<p>
270 +Here you can enter the username you want to reset the password for.
271 +NOTE: It is case-sensitive, write it exact as listed (without the &lt;
272 +and &gt; of course)
273 +<p>
274 +Or if the name uses some characters that cannot be displayed, enter
275 +it's ID number (RID), like this: 0x1f4 would select administrator.
276 +<p>
277 +We select the default, which is administrator.
278 +<p>
279 +<pre>
280 +
281 +RID : 0500 [01f4]
282 +Username: Administrator
283 +fullname:
284 +comment : Built-in account for administering the computer/domain
285 +homedir :
286 +
287 +Account bits: 0x0210 =
288 +[ ] Disabled | [ ] Homedir req. | [ ] Passwd not req. |
289 +[ ] Temp. duplicate | [X] Normal account | [ ] NMS account |
290 +[ ] Domain trust ac | [ ] Wks trust act. | [ ] Srv trust act |
291 +[X] Pwd don't expir | [ ] Auto lockout | [ ] (unknown 0x08) |
292 +[ ] (unknown 0x10) | [ ] (unknown 0x20) | [ ] (unknown 0x40) |
293 +
294 +Failed login count: 0, while max tries is: 0
295 +Total login count: 3
296 +
297 +* = blank the password (This may work better than setting a new password!)
298 +Enter nothing to leave it unchanged
299 +Please enter new password: *
300 +</pre>
301 +<p>
302 +Some information is displayed. Also, if the account is locked, you
303 +will be asked if you wish to unlock it (not shown here)
304 +<p>
305 +<b>We go for the blank password option (*) WHICH IS HIGLY RECOMMENDED
306 +over setting a new one.</b>
307 +<p>
308 +<pre>
309 +Please enter new password: *
310 +Blanking password!
311 +
312 +Do you really wish to change it? (y/n) [n] y
313 +Changed!
314 +
315 +
316 +Select: ! - quit, . - list users, 0x<RID> - User with RID (hex)
317 +or simply enter the username to change: [Administrator] !
318 +</pre>
319 +<p>
320 +! brings us back to the main menu here.
321 +<p>
322 +<pre>
323 +
324 +<>========<> chntpw Main Interactive Menu <>========<>
325 +
326 +Loaded hives: <sam> <system> <security>
327 +
328 + 1 - Edit user data and passwords
329 + 2 - Syskey status & change
330 + 3 - RecoveryConsole settings
331 + - - -
332 + 9 - Registry editor, now with full write support!
333 + q - Quit (you will be asked if there is something to save)
334 +
335 +
336 +What to do? [1] -> q
337 +</pre>
338 +<p>
339 +<H3>5. WRITING OUT THE CHANGES</H3>
340 +Everything has been done, time to commit the changes.
341 +<p>
342 +<pre>
343 +
344 +Hives that have changed:
345 + # Name
346 + 0 <sam> - OK
347 +
348 +=========================================================
349 +. Step FOUR: Writing back changes
350 +=========================================================
351 +About to write file(s) back! Do it? [n] : y
352 +</pre>
353 +<p>
354 +<b>THIS IS YOUR LAST CHANCE! If you answer y here there will be a
355 +write to disk!</b>
356 +<p>
357 +<pre>
358 +Writing sam
359 +
360 +***** EDIT COMPLETE *****
361 +
362 +You can try again if it somehow failed, or you selected wrong
363 +New run? [n] : n
364 +
365 +</pre>
366 +<p>
367 +That was all.
368 +<p>
369 +Please answer n here and then reboot, CTRL-ALT-DEL. Remember to remove
370 +the floppy or CD.
371 +<p>
372 +<p>
373 +
374 +<H2>What can go wrong?</H2>
375 +Lots of things can go wrong, but most faults won't damage your system.
376 +<P>
377 +The most critical moment is when writing back the registry files to
378 +NTFS.
379 +<p>
380 +The most common problem is that the computer was not cleanly shut
381 +down, and my disk won't write correctly back. (it says: read only
382 +filesystem). If so, boot into Windows Safe Mode (F8 before windows
383 +logo appears) and shut down from the login window.
384 +<p>
385 +Also, see the <A HREF="faq.html">FAQ</A> for help with other common problems.
386 +<p>
387 +For linux-knowledged people, you may do things manually if the scripts fail,
388 +you have shells on tty1-tty4 (ALT F1 - ALT F4).
389 +<hr>
390 +<p>
391 +<H2>Bootdisk history</H2>
392 +<p>
393 +<strong>2007-04-09</strong>
394 +<ul>
395 +<li>Now with Vista support!
396 +<li>Newer drivers, better probe/loader. Should be able to auto-load
397 +all relevant drivers for PCI based disk hardware.
398 +<li>Better manual selection of drivers (if you need to load ISA
399 +drivers for example)
400 +<li>CD only release at this time. If anyone need me to continue floppy
401 +releases, please mail me.
402 +<li>USB drive can be made out of the files on the CD, see readme.txt
403 +on the CD.
404 +</ul>
405 +<p>
406 +<strong>2005-03-03</strong>
407 +<ul>
408 +<li>New CD release (sorry, when yet again rewiring the driver stuff, I did
409 + not have time to make floppy stuff work)
410 +<li>Contains disk driver updates (SATA maybe more working now)?
411 +<li>New driver auto-probe and load. Better now?
412 +<li>NTFS updates, writes should be more safe, I hope, working more often.
413 +<li>No changes to the password routines themselves.
414 +</ul>
415 +<p>
416 +<strong>2005-03-03</strong>
417 +<ul>
418 +<li>Driver update only, with a few fixes to the autoprobe, too.
419 +<li>Some popular drivers like aacraid, megaraid and some SATA-drivers
420 + were problematic or missing, now hopefully here.
421 +<li>Note that most SATA-drivers also need the libata.ko.gz file,
422 +autprobe loads it if needed.
423 +<li>The driver archive are too big to include all drivers on a floppy
424 + so remove some you're sure you don't need. Remember to always
425 + keep pcitable.gz and moddep.gz if you want autoprobe to work.
426 +<li>The CD of course includes all drivers.
427 +<li>The manual try-all-drivers load is buggy, and won't try to load all
428 +drivers, it will stop after each that has not been tried before. But
429 +specifying a single driver directly still works.
430 +<li>No changes to password edit routines
431 +</ul>
432 +<p>
433 +(earlier history removed)<br>
434 +<STRONG>9705xx</STRONG>
435 +<UL>
436 +<LI>First public release.
437 +</UL>
438 +<HR>
439 +<H2>Download</H2>
440 +<p>
441 +<small>Note: Some links may be offsite.</small>
442 +<p>
443 +<UL>
444 +<LI><A HREF="cd070409.zip">cd070409.zip</A> (~3MB) - Bootable CD image.
445 +<small>(md5sum: ffb92d9ffafaa6ed06e9b98fc14f707d )</small>
446 +<p>
447 +Bootable USB drive may be made from the files on the CD. See readme.txt on the CD.
448 +<p>
449 +<small>Last floppy release (it is old). WARNING: WILL CORRUPT WINDOWS VISTA!
450 +<LI><A HREF="bd050303.zip">bd050303.zip</A> (~1.1MB) - Bootdisk image,
451 +date 050303 <small>(md5sum: 4c85bc15286e69f9fd347e07711636eb)</small>
452 +<LI><A HREF="sc050303.zip">sc050303.zip</A> (~1.4MB) - SCSI-drivers
453 +(050303) (only use newest drivers with newest bootdisk, this one works
454 +with bd050303) <small>(md5sum: 745a1889b6580bc8f1bfb565e73666d3)</small>
455 +</UL>
456 +</small>
457 +<p>
458 +Previous versions may sometimes be found <A HREF="http://ntpass.blaa.net/">here</a> (also my site)
459 +<p>
460 +<p>
461 +<B>NOTE THAT THE BOOTDISK CONTAINS CRYPTHOGRAPHIC CODE, and that it may be
462 +ILLEGAL to RE-EXPORT it from your country.</B>
463 +<p>
464 +
465 +<H3>How to make the CD</H3>
466 +<p>
467 +Unzipped, there should be an ISO image file (cd??????.iso). This can
468 +be burned to CD using whatever burner program you like, most support
469 +writing ISO-images. Often double-clikcing on it in explorer will pop
470 +up the program offering to write the image to CD. Once written the CD
471 +should only contain some files like "initrd.gz", "vmlinuz" and some
472 +others. If it contains the image file "cd??????.iso" you didn't burn
473 +the image but instead added the file to a CD. I cannot help with this,
474 +please consult you CD-software manual or friends.
475 +<p>
476 +The CD will boot with most BIOSes, see your manual on how to set it
477 +to boot from CD. Some will auto-boot when a CD is in the drive,
478 +some others will show a boot-menu when you press ESC or F10/F12 when
479 +it probes the disks, some may need to have the boot order adjusted
480 +in setup.
481 +<p>
482 +
483 +<H3>How to make the floppy</H3>
484 +<p>
485 +The unzipped image (bdxxxxxx.bin) is a block-to-block representation
486 +of the actual floppy, and the file cannot simply be copied to
487 +the floppy. Special tools must be used to write it block by block.
488 +<p>
489 +<ul>
490 +<li>Unzip the bd zip file to a folder of your choice.
491 +<li>There should be 3 files: bdxxxxxx.bin (the floppy image) and
492 + rawrite2.exe (the image writing program), and <b>install.bat</b>
493 + which uses rawrite2 to write the .bin file to floppy.
494 +<li>Insert a floppy in drive A: <b>NOTE: It will lose all previous data!</b>
495 +<li>Run (doubleclick) <b>install.bat</b> and follow the on-screen
496 +instructions.
497 +<li>Thanks to Christopher Geoghegan for the install.bat file (some of
498 +it ripped from memtest86 however)
499 +</ul>
500 +<p>Or from unix:<p>
501 +<CODE>dd if=bd??????.bin of=/dev/fd0 bs=18k</CODE>
502 +<p>
503 +<H3>How to make and use the drivers floppy</H3>
504 +<p>
505 +<b>NOTE: Not all files will fit on a floppy, so leave out what you
506 +think you do not need!</b>
507 +<ul>
508 +<li>Format (or delete all contents) on a floppy
509 +<li>Unzip the drivers you think you may need to it
510 +<li>Files with names ending in <code>.ko.gz</code> should end up in a
511 +directory called <code>scsi</code>
512 +<li>Be sure to also include the files <code>moddep.gz</code> and
513 +<code>pcitable.gz</code>, they are the dependency list, and pci
514 +mappings.
515 +<li>To use, at the disk select menu, select 'd' to auto-load, and you
516 +will be asked to swap to the drivers floppy when needed.
517 +</ul>
518 +<p>
519 +<HR>
520 +<p>
521 +<H1>Bootdisk credits and license</H1>
522 +<p>
523 +Most of the stuff on the bootdisk is either GPL, BSD or similar
524 +license, you can basically do whatever you want with all of it,
525 +the sourcecode and licenses can be found at their sites, I did not change/patch
526 +anything.
527 +<p>
528 +The "chntpw" program (password changer, registry editor) is licensed
529 +under GNU GPL v2. <A HREF="GPL.txt">COPYING.txt</A>
530 +<p>
531 +Stuff I used, big thanks:
532 +<UL>
533 +<li><a href="http://kernel.org" target="_top">Linux kernel</a>
534 +<li><a href="http://linux-ntfs.sourceforge.net/index.html"
535 +target="_top">NTFS for linux project</a>
536 +<li><a href="http://www.busybox.net" target="_top">BusyBox</a> - Lots of commands
537 +in one binary :)
538 +<li><a href="http://www.uclibc.org" target="_top">uClibc</a> - A
539 +reduced size / embedded libc.
540 +<li>Some bootdisk ideas and layout from <a
541 +href="http://www.zelow.no/floppyfw/" target="_top">floppyfw</a>
542 +thanks to ThomasEZ for that (and his great firewall..)
543 +</UL>
544 +<p>
545 +<HR>
546 +<p>
547 +<img src="/cgi-bin/wc?u=pnordahl_2;w=9">
548 +<p>
549 +<a href="editor.html"><img border="0" src="images/back.gif" width="98" height="20"></a><hr>
550 +<ADDRESS>070410, [email protected]</ADDRESS>
551 +</BODY>
552 +</HTML>
553 --- /dev/null
554 +++ b/faq.gif.uu
555 @@ -0,0 +1,125 @@
556 +begin 644 faq.gif
557 +M1TE&.#EAS`%!`-4``)B8F*#=ZGIZ>PG-ZD;!VJBHJ`O9]*O@[`6\W"FZUEC%
558 +MVQFWU0O5\0G+YV#(WC6]UPNTU5V6H`?"X0K0[8S6Y05@<!NBOP6,I'?.X145
559 +M%5145)79Z(&OMRRRST.ZU`2UU5>SPB5YB`:_WH#3Y#4U-<#`P`?%XVFSP`>A
560 +MO`S<]P(O-SV,FC>VSP5^D1FNRP>OS$JVR6)G:6O,X"2RS4&AL23`V12TU'S0
561 +MX@1#3AV'G`6YV0FVT`_`W`2WUPC(Y@```"'Y!```````+`````#,`4$```;_
562 +MP))P2!3&2)FD<LEL.I_0J'1*K5JOV*QVR^UZO^"P>!PFQ8KH-+&@R5PL\+A\
563 +M3J_;[_B\?L_O^_^`@8*#A(6&AXB)BH@7&1H%:I%"`!H5%BXSF1V;G)V>GZ"A
564 +MHJ.DI::GJ*FJJZRMKJ^PL;*SM+6MF3,N%A4:`))I`"0AF!TLQA[(R<K+S,W.
565 +MS]#1TM/4U=;7V-G:V]S=WM_@X>+:QBP=N2$DOK]#`B0Y,\4>!`0*]O?X^?K[
566 +M_/W^_P`#"AQ(L*#!@P@3*ES(L*'#AQ`5TO-@;D8.$@+8E0B60UX]!S)D8!A)
567 +MLJ3)DRA3JES)LJ7+ES!CRIQ)LZ;-FSASZMS)LV?-_Y`.%!"@V.'BND@<BWT4
568 +M.6($A:=0HTJ=2K6JU:M8LVK=RK6KUZ]@PXH=2[:LV;-HTX9MBD%&4`+FC")]
569 +MIU0!4PH;-@38R[>OW[^``PL>3+BPX<.($RM>S+BQX\>0(TN>3+ERX[P41K05
570 +M&E>=&@TAZLJX@9?O@=.H4ZM>S;JUZ]>P8\N>3;NV[=NX<^O>S;NW[]_`@^?F
571 +MNX'"#1F<.X30D"9&A1DL/-C%4#J`\.O8LVO?SKV[]^_@P]?>6WPSQ1D5SA`1
572 +MD,%"!^D.,#C5:UV\_?OX\^O?S[]_;_*981"4!QU8D,%1!;P#G72CX47?7OY%
573 +M*.&$%%9H885]87:<`N==!/])"<ZY\!X!()&6EV4HIJCBBBRVZ.*+,,8HXV7%
574 +M'>?`4!VXD-Y&[<4#WVA..9C7D$06:>212":IY)),-NGDDU!&*>645%9IY958
575 +M9JGEEEQN^=0(-G)XCH$`A+B@`B4VI=::;+;IYIMPQBGGG'36.59389ZGXQ$7
576 +M8!(=FB+=T-2@A!9JZ*&()JKHHHPVZNBCD$8JZ:245FKII9AFJNFFG'9*Z`UM
577 +M#<A"+A<@@0(Q\P#JTZJLMNKJJ[#&*NNLM-:ZDUM"$9@+"DF<.D,"#]0#:$C$
578 +M%FOLL<@FJ^RRS#;K[+/01BOMM-16:^VUV&:K[;;<=NNML4$)]4`"N_:*";#T
579 +MV./_P+KLMNONN_#&*^^\]-9K[[WXYJOOOOSVZ^^_``<L\,`$%VRPN_;0,VZY
580 +M&:!@@PL)H"ML1!17;/'%&&>L\<8<=^RQ0PI'[((-O#9L@PV_/A`L/2RW[/++
581 +M,,<L\\PTUVSSS3CGK//.//?L\\]`!RWTT$07;;3,*I-[<LDH0&##`A&KO/+1
582 +M5%=M]=589ZWUUEQW[77-4D>\@`T0,.WTTU%+K?;:;+?M]MMPQRWWW'37;??=
583 +M>.>M]]Y\]^WWWX`'+OC@<8M]<MF]0N#T`E!'[/CCD$<N^>245V[YY9AGKOGF
584 +MG'?N^>>@AR[ZZ*27;OKIJ%O..-F(-_S"V8PW#CH,)]1N__OM)T20^NZ\<P["
585 +M"2#0`'GM$71PN@>X)\]"[\PG0/L)PEN>/.X@-"\Z"\1;K[WJJY/]@MF*GQS[
586 +M^.27;_X)!0"@_OKL_V#^^_#'+__\]-=OO_P<%.`<^>F_<[_\("A`^MA'0`"L
587 +MX'\(3"#]T`<`%<2/!0(L(`%C,`,%6M!^,$B?^R[(P0[>[W"*8]KKPG>R$IKP
588 +MA"@\(0@`((`8:."%,'SA#U)(PQK:\(8XS*$.=WA##@`@`Q4X80$$\(,+\-"&
589 +M"TB?"V,(PQ@(@#T6.*(4IXC#%6I`!3;,GP"8V,0GDB"(5`RC#B%(1#&:\8Q2
590 +M5!P$OM>K#WQ`C7",HQSGJ,85QO_@!RK(HQ[U2,<^^O&/@`RD(`=)2,7Y$(AQ
591 +M'&(1"]E',N)QCWK$@1,1R<A*6I*.5E2!'].7`4CNT8E7O*0H`^G(49KRE(5T
592 +M(]/<R,I39A*5L(RE+/OHPQB$()%$O``J.Z#(/D:`/168I3#C&,!0]E&1NIPC
593 +M#2BAR6&.DI?N<*8T*\E*5;:QFMC,IC:UF<EMNC%_`@RG.--'@VIF<)SC!$`Y
594 +M6PE.=(H3`"%P8P=*P`9OY@^>K)Q!.]U9@`B\@)7TY&<X_?E-%@I`??'\`#(_
595 +MP`)ZQF";,Z"G!OZI36C^P)X_K``K(2A0?'Y@GO7$)@3N*8`04!1]`DV?!:K)
596 +MT8Y>T9O_"LWE-KOY@0!Z5)OT%,`%6'G.CJZ3E0'L:$*A^<20VC2A-4VI2@&J
597 +MU'Y2U(U!Y>=-84K5;*ZRJEBM)DVWZ<,G>O6K3]1`"]P(08."]:O.825)S_I5
598 +M(,I3D1AUZP>2.$2V?A4'K*RK79\8`[Q^H*M/E.M"/\#"#(PUF^C[@5\K"E>N
599 +M9E2>.;7K2S_:V(T*,`,_T*@;&;C7L.[THY'=ZV2W.=ALTG2KV1QL63O;0LTF
600 +MU:QGE2M1GWC1FC(3JNECK08^J]>]]A6HN;6K7+.:5:;UX+@]^`!RE\O<YCK7
601 +MCBI`KG*3BUP?:N`'V,WN#S(`2AP<-W_7U:YV-4#;X\Z`D^+-_ZX9@'E<BSHW
602 +MN8>LP'$SR)[T8I>\N3SN$$E@WQ_@]P??I41VY=L#9!X7!"WT+G61J\$+O+<'
603 +M[GUO?+_+AOYB-[H05N2";8I'%"RW?_WE[A85#-X0@Q+#TV6N@8^;XAYD\L#,
604 +M?/"*2]S?_S(X&!;.;'N'B%GLPOB*^L6Q?46L`07OM\;E#3)_+4S@!SMYN2TV
605 +MK@YZH(,J'W?*4V8NEJE<Y2Y?>84MI`$(QDSF%028!#BX@)K7?($5;#&Z.O`A
606 +MFMG,9C<3D<H6I3.;?PG$'1.QRU:N;D9_K`(]J]D"M+U`E159`4/;^0=3EG.:
607 +M+^#A`N>RRC9@X0]>P%P(MF'+7*9RAO^WN`(RF]JF0*RRI`V]YBI;=,HCU9^.
608 +MKZQ?(C;:T6\^\Z3U[&8@6SG+6#8PEK/L8F96.9/`OO*49QR,7=/YT5QF-*LI
609 +M/>4\J_G8,=:!M'$-9$MG%M=_7K2MI^WA0`-:U,1&+JB]/.62O0#0\(ZWO.<-
610 +MYH,6$-)QSJB\D9WO5,N[`YIVM2+GW>\*"#S<\HXOMJ](<&2*NXC_#GC!X>WP
611 +M*O^2!"V`=V(-3O#92E!]P%2UO@E^<$B7=;N*CG?%X\UOA>_;V`V_],L9K@-^
612 +MR[OB+H\WP!&^\HX/'-#\[CG082YT5TM<VS(GN=*7#N\7).$%"-!!U*L\=018
613 +MG>I1MWK6IR[_]2Z#>8E,_('5XWMU0-.`ORJ0NIP-?G6N.S+JKZ9ZE\>>4;@/
614 +MG.MS5S@"H%OULB,`F5$'_-9++G(@9OWA%]`ZP&.@@K8GD8@HT'K7JPY-L#/1
615 +MB<",^MJQ?GBL0U,#-%`D#MX-[\"S)_&`GGK+1RYWJ_.[\U,'?.NECNR]&QOV
616 +MB%=[,-B.=QV\W?1NF+S<`6W1K=N>YBOW>]`O7?627YW'J.=\WV%O?*E/?_B3
617 +M=WH&H*[U[GO_^^#OOAT?Z4FZ&_[[+E!SY!%0RU*?>LSH(Z+5BQ]^LB.`_N"W
618 +M_]?%_/X`YM+J@N=]]&=_6A>`"*!IZX<`&90!.!!^BJ=(GI1'DI1Y_^Q7)N[W
619 +M?C!@`_.G5_S5`@[X=RUT@:=F78U7@>?W?9GT@08H?LSD>BT8?H+7?OWW.XI4
620 +M@"$X@S```1LH?RQX10#X?^"7@B!81."'?T,4`R)H:BR@@Q_8A.&G?=SGA%*H
621 +M=4)8?W7GA(#U<>J3!%:7`#5HA>?W>_EWA?7V<>ES7>NW@EWXA03X@T1(A>Y0
622 +M`5KG0S_@@1\HAM_'9W*(`"=@4%HH`!:``%X85BH0A3#H57^H6.:WARCX@H?X
623 +MAHWH@\=7@N`7@WZHA5QH=6:EA3&P`X+XA53X@FKH@I(XBH,H=IJ(B!_7B5/8
624 +MBE`H`K`8B[(XB[18B["82;8(B_&5B[+85?]<%$.8U0*P>(JYN(LB0(RV:(Q?
625 +M]XLOQ%\5$(O(5(O(:(S0F$NRN``LI`*PF$1WQ(O#J$C%F%&PZ`*6QT1\I8V#
626 +MV%H[X(U'R(PR]`,HH(OB6(NXF(O12(_,=(OY:(OWZ(ON&(RQ2`/NB'E?=(S@
627 +M*(OU>(^TF)#62(O(*`("R8P$^8S>6)&S^(H6F9'Z>$6\2(T=&0R=%($J@`/"
628 +M^(U$%(Y`9)(_@)(4.7XBF4<4"8L**8O3.(_56$2SR`&0)P(9E%D5^9"T2(TH
629 +M@`,B^5\&N468UP&\R&,O.9+Q*(\IB8\<:8\-N9#[6(^UV(\@^9(D.8L70)01
630 +M>&)'N9((N8\S69;_4WF6*BF+7RF28JF1%@F%$C"7=%F7$B`"=8F7=KF7$I!)
631 +M>:F7=QE??+F7@CF8=GF*>7F7<UF8B+F7>%F8?FF8=HE,?/D`BA28&369N627
632 +M+$`)%2`!&O0"@PF8Q'B7>HF7(E"8DBD!,Z!I$F"9MH9?-,`#C@F:FTF7@*F8
633 +MBJF:NMF7S"29E,F7N.B;5V28P<F;O5F;N5F7RU2<C4F7?BD"E)F;>!F=P7F8
634 +ME[F:<]F<*C"7RYF8N+F:<JF=Y%F7D3F8R(F>NU>>STF8F?F:V<F7D/F;Y7F=
635 +M=0F;/["8ZUF7]CF7+$0"-9`@W:F=^&F8Z5F9EUF@I>)5"\"7_6F@^[F7_^?I
636 +MH+<IH?0YH9I91/KY1>6IG7Y9H.9)GP\ZEY$YHB#JH?39H=H)A28PERW:HA)@
637 +M`B]*ES(*HRY*HS%*G"I@HS):E_$UHS:*H[44`L#B-AW``RT*FR3@`FXCF":@
638 +MI$S:-DX*9AHP`V^3``M0H\C$HS&*GRTZI&+3HL'YHB:`8#&0/W4(HSU:HSD*
639 +MGT04HS7:HQ+@I#4`-_25GR#Z`A,H`#1`IC(Z1!JP`D7:-C,`HT/:`6W3AU>T
640 +MIFPJIJ0VJ&JCJ`-*I5;:-ELZIV42&F]SI#E:IV\CJ4^Z7TQ:J#H:HX`JJ(G*
641 +M3']ZFXWJI2WJJ6XCJ3<ZJRXJISDJIS,:HRP:I_^\VJN^ZJN9]*LR^J/"6J-]
642 +M^$0`(%`Q@`(R6@-F)5#`U*S/RD^V)J,PX(?0&@):FDN^ZJK'>E`EM:I%U*L\
643 +M8%!WU`/%6J.NZJO$&E52=5VA2D1QR@M/%`%96J.;*%`D8*S8ZDZJ*JQZE:S^
644 +MVDG6VJ_N=$?,:@+?*K`'F[`FL$\#BP,FX*Q>E2`R&JPF$+!21;`9RZV]NJX0
645 +MBTX_)+'I6K*\NJL^8`(IJ[(RZ@,KVZLOVZL8&[,U^J,I2[[email protected]@K&P&8
646 +MUUE`U+,_RU9W!&DRR@,MQ%I`M*U%A+.NJK->M;0=.ZXLR[(Z2402N[):RZL^
647 +ML*Z]VJZP=5;750'Q^@/_O(H"Z\6G-4H#0VM79BNC4*M;.]JR-.NSK-6!1YNT
648 +MHH5'-1JWG=6TPQJV8,5?%R"C=DM;%_NOA[M7>#NUA?NQBE2S@OM5A/NK.$NW
649 +M+9NY*ZM].^"RGONYH!NZHNNY-'!AH^NR*X!=%7"ZH&[email protected]=%^"Y/(`#.39)
650 +MJ^NRL_NZ*H`"G^L"*O"ZF>6YX16[H3L#2^:YKJNZ+CN\HNL!90*/K/NYQHM=
651 +MIYNZP>L#I?NZMSN]/Q"Z//"[V(4#/."R%0"\W>NY.=!C.:8"K)N[V05*XG6[
652 +M+NN[KXL#.O"YR9MCQ.L#UFMAAB6[M)M=+IN][.L#[IMC\LN\Q7N\J/NZ_QN]
653 +M_Q`<NCN0!)T;P19\P1B<P1BLAQK<P1[LP1E$`@7\P21<PB9\PC[`P2B\PBS<
654 +MPBZ,P1.<`3O0`#1<PS9\PSB<PSJ\PSS<PS[\PPT07T`\Q$1<Q$-,ARU@Q$J\
655 +MQ$S<Q$8LQ$X<Q5(\Q51<Q34<PSLP`#2LQ5K<PUW<Q0T`QC@\`&*\PV7LPU\<
656 +MQCG,Q3?<Q5#<QC4,QF1\QFILPW0<QVM\QV9LQPT0H-V(QV1<QX(\R'",QSP\
657 +MQW<<R(3,QV/\Q5RLQX=<QG(<`9A5`6-\R5LLR&+,QHN<QD2<R)N\QF'LR5NL
658 +MR(N\QXR,RI"<R5^,Q8C\RK`<R[(\R[1<R[9\R[$<7_^XO,N\W,NXG%@XX,O"
659 +M/,S$7,S"3#(H\`+&O,S,W,S._,R(',,H`,W47,UD3,F99<W:7,L:-,W;_,W@
660 +M',[B/,[D/,R\XAP3D,[JO,[LW,[N_,[P',_R/,_T/`'(O`/UG,_ZO,_T_`!$
661 +ME`'\'-`"/=`$7=`&?=`(G=`*K=#I\4,OL-`0'=$2/='YS`,H@`+X3-$:O=$<
662 +MW=$>_=$"[72^@,X@7=(F?=(HG=(JO=(LO=([0D\D<`$,P``3,-,S7=,U?=,Z
663 +M;=,\S=,YO=,^_=,WG<XTK=/JW-,V3=0^C=1)W=-"+=1+W=1,K=12C=-%_=-8
664 +M/=1,C=16O=5%O=,Y3=4T#=7_21W68>W57TW6:*W4.-W54=W64-W56:W6:3W5
665 +M1.W68)W76QW7:#W61LW59IW5?MW73>W6AKW78OW55\W50(W7.5TJ'U("[+$#
666 +MA%W9EGW9F)W9FKW9G-W9GOW9H!W:HCW:I%W:IGW:G#W!&4$$SH':KOW:L!W;
667 +MLCW;M%W;MGW;N/W2:X!QFFT`/.W;#`#</2W<A`W<QFW9Q)W9R3W;R]W;FWW<
668 +MO[W5PNW;S8W;2%W=P^W<P5W<UCW3RXW=W2W=FMT")!#91!`,%V``ZKW>[-W>
669 +M[OW>\!W?\CW?]%W?]GW?^)W?^KW?_-W?_OW?`![@`C[@!%[@\UTJ1X$&/X0"
670 +M!M[@_P[^X!`>X1(^X11>X19^X?K-*PF>!NS!X!C^X2`>XB(^XB1>XB8^X+RR
671 +MVK_0X2FPWBVNWB^>`C(.XS,.XP8PXS&>XS*^XRU>XSQ^XS2^XR[NXSU^XT)>
672 +MXT9NY#_.XS\.Y$(>Y$FNY#H>Y5*NY$[.Y#@.Y%*>Y5C.Y%M^Y"^^Y3;^Y$U.
673 +MXU"NXST>X^RMYF6>YDC^YDV^Y%KNXF.>Y&&^YCA>Y%;NYGF.YGMNYG8^YU4^
674 +MY'+.YED>Y'WNYEJ^Y&&>YS9NY7/>Z"FN$4+@#A?0Y9B>Z9J^Z9S>Z9[^Z:`>
675 +MZJ(^ZJ1>ZJ9^ZJB>ZJJ^ZJS>ZJB^H)0^!,&0Q*Y>Z[9^ZW6XGNNZONN\WNN^
676 +M_NN8W@#DO>&43@DR7,2F;,B9?,J#O,I6S.Q>?,A1S,F8+,IF[.QQ+,<_G.S2
677 +M/LK53LK3WNV?3,78CL;AONRI#,>KC.T3W`NQWAQD$._R/N_T7N_V'@7FF^_Z
678 +3ON_\WN\Y=N\`C^\.S%WL$`0`.P``
679 +`
680 +end
681 --- /dev/null
682 +++ b/faq.html
683 @@ -0,0 +1,343 @@
684 +<HTML>
685 +<HEAD>
686 +<TITLE>Offline NT pw & reg-editor, FAQ</TITLE>
687 +</HEAD>
688 +<BODY link="#00687F" vlink="#00687F" alink="#00687F" bgcolor="#C0C0C0">
689 +<H2 align="center"><img border="0" src="images/faq.gif" width="460" height="65"></H2>
690 +<hr>
691 +
692 +Last update: 080526
693 +
694 +<p>
695 +<h3>
696 +The changes does not take effect.<br>
697 +I get some errors like "read-only filesystem" and such.
698 +</h3>
699 +<ul>
700 +<li>The current version does not like to write to the NTFS filesystem if
701 +windows was not shut down cleanly.
702 +<li>Shut down windows from the login page, or from the start menu.
703 +<li>If there is no way to shutdown from the login-page, try this:
704 +<ol>
705 + <li>Boot windows into Safe Mode (press a lot on F8 before the
706 + windows logo screen appears)
707 + <li>The login screen in safe mode should usually have a shutdown
708 + option, so shut it down!
709 + <li>You may have to do this TWICE! quite often..
710 +</ol>
711 +</ul>
712 +<p>
713 +<h3>
714 +Why can't I access my encrypted (EFS) files after resetting the password?
715 +</h3>
716 +<ul>
717 +<li>Because in XP and possibly later service packs in win2k the
718 +password itself is used to encrypt the keys needed for EFS.
719 +<li>Sorry, there is no way to recover the files once the
720 +password has been reset.
721 +</ul>
722 +<p>
723 +<h3>
724 +The .bin-file inside the .zip won't fit on a floppy.
725 +</h3>
726 +<ul>
727 +<li>You didn't read the bottom of the <A HREF="bootdisk.html">bootdisk
728 +download page</A>
729 +<li>Click on the <b>install.bat</b> after extracting the .zip file,
730 +and follow the on screen prompts.
731 +</ul>
732 +
733 +<p>
734 +
735 +<h3>
736 +The keyboard does not work! I can't answer the questions!!
737 +</h3>
738 +<ul>
739 +<li>If you have a USB keyboard either your USB controller or your
740 +keyboard is not supported with the rather generic drivers I use.
741 +Nothing I can do at the moment, sorry! Try a PS/2 keyboard if possible.
742 +<li>If the keyboard is PS/2 and won't work, I do not have a
743 +solution. Sorry.
744 +</ul>
745 +<p>
746 +
747 +<h3>
748 +When loading the floppy it stops with "boot failed."
749 +</h3>
750 +<ul>
751 +<li>Bad floppy. Or bad bootloader (some versions are known to give up
752 +easy)
753 +<li>Use another floppy or a new version of the ldlinux.sys file (go
754 +allthewebbing for it for instance. grab one from a linux distros
755 +bootdisks. I did.)
756 +<li>Or get the CD image from the <A HREF="bootdisk.html">download</A> page.
757 +</ul>
758 +
759 +<p>
760 +<h3>
761 + I have the CD in my CD drive, but it starts on the haddrive.
762 +</h3>
763 +<ul>
764 +<li>Check your BIOS manual on how to boot from CD, or if the CD-ROM is
765 +on a SCSI-card, check the cards manual.
766 +<li>For those of you without manuals: Try hitting ESC or F10 or F12
767 +for bootmenu right after the RAM-count.
768 +<li>Or enter BIOS setup and change the boot order. Either you can
769 +figure that one out from the menus, or you really need the manual.
770 +<li>I don't remember when BIOS-folks started implementing the CD boot
771 +(El Torito) standard, but it was around 1995? Older computers won't CD boot.
772 +<li>But BIOS-programmers never actually READ the bloody standard, so
773 +you may have a buggy one that only boots some CDs.
774 +<li>If it boots (first banner page), the same problems as for the
775 +floppy may show, please read on..
776 +</ul>
777 +
778 +<p>
779 +<h3>
780 +The floppy stuff crashes with "VFS: Unable to mount root.." and panic etc.
781 +</h3>
782 +<ul>
783 +<li>The are several ways of getting the size of the memory out of the
784 +BIOS at boot.
785 +<li>It probably selected the wrong one, and 16MB is a bit too little.
786 +<li>Strangely, this most often happens on big brand machines, like
787 +Compaq and DELL.
788 +<li>At boot, hold down LEFT SHIFT key until "Boot: " prompt appears.
789 +<li>Then enter:
790 + <ul>
791 + <li><code>boot mem=128M</code>
792 + </ul>
793 +<li>but substitute with how much memory you have (or a bit less to be safe)
794 +<li>If this doesn't help, there is probably not support for your
795 +motherboard, CPU or BIOS.
796 +</ul>
797 +
798 +<p>
799 +<h3>
800 +It cannot find any NT disks or paritions.
801 +</h3>
802 +<ul>
803 +<li>Some controllers require more than one driver. Usually the
804 +auto-load should take care of dependencies, but it does not hurt to
805 +try auto-load (d) again.
806 +<li>It's either caused by unsupported controller or filesystem driver problems.
807 +<li>See next questions..
808 +<li>Please don't ask about inclusion of new drivers. I'm often short
809 +on time, get lot's of mail, and it's difficult to put in things I
810 +cannot test.
811 +<li>If you really insist on asking for new drivers, you must at least
812 +provide me with correct info on controller card or chip brandname,
813 +type, model etc, and a link to website(s) with drivers for linux.
814 +If there also are docs for using it on linux, I need that, too.
815 +However, as I get a lot of mail, I cannot guarantee an answer or that
816 +your needed driver will be included.
817 +<li>There are however several other things to try:
818 + <ul>
819 + <li>Try to build <A HREF="http://www.cgsecurity.org/" TARGET="_top">Grenier's DOS floppies</A>
820 + <li>Move harddisk to another machine as secondary, then try
821 + <A HREF="http://www.cgsecurity.org/" TARGET="_top">Grenier's chntpw.exe</A>
822 + <li>Install new NT/2k/XP in another dir than \winnt etc, then login
823 + with new install to access the old ones sam file. Either rename it
824 + (will leave admin with blank pass) or use chntpw.exe on it.
825 + </ul>
826 + <li>You could boot a live linux CD
827 + (like <A href="http://www.ubuntu.com/" TARGET="_top">Ubuntu</A> or others), it
828 + will allow access to the windows disk. Then run the "chntpw.static"
829 + program included in the source zip file on the source <a href="editor.html">download page</a>
830 +<li>Or why not look at
831 +<a href="http://www.petri.co.il/forgot_administrator_password.htm"
832 +target="_top">The password recovery page at MCSE World</a>
833 +</ul>
834 +
835 +<p>
836 +<h3>
837 +How to load a 3rd party driver
838 +</h3>
839 +<ul>
840 +<li>There is a menu selection for it. Put file(s) drivers*.zip
841 + on a floppy or on a USB stick (may be a different one from the one
842 + you boot from). The zips should contain *.ko files. The files will be automatically unzipped and ready
843 + for auto-load or manual menu selection.
844 +<li>I do not know how easy or difficult it will be to actually get the
845 + drivers to load into my kernel. There may be versions incompatibilities.
846 +</ul>
847 +<p>
848 +
849 +<h3>
850 +It hangs when mounting the windows disk
851 +</h3>
852 +<ul>
853 +<li>Hangs when it says something like "NTFS volume version 3.xx"
854 +<li>If there is disk activity, just wait. Took more than 10 minutes in
855 + one of my tests once.
856 +<li>If there is no disc activity, what a few minutes, then reset and
857 + try again.
858 +<li>If it still hangs, try to boot windows into safe mode first, then
859 + shut down etc. See other faq entries about that.
860 +</ul>
861 +<p>
862 +
863 +<h3>
864 +It seems to change the password, but NT won't agree.
865 +</h3>
866 +<ul>
867 +<li>The NTFS code wasn't that great after all (probably didn't write
868 +things properly)
869 +<li>My code wasn't that great after all. (it didn't change or changed
870 +in the wrong place. The V struct is still marked "here be dragons..")
871 +<li>Try blanking the password instead (menu selection 1), this
872 +may straighten things out. In fact, reports indicate: BLANKING RECOMMENDED!
873 +<li>If it still won't work, see the previous solution.
874 +<li>Blanking will probably be the only option in newer releases.
875 +</ul>
876 +<p>
877 +
878 +<p>
879 +<h3>
880 +I'm told that the account is locked, even if I know it is not.
881 +</h3>
882 +<ul>
883 +<li>Ok, then the code to identify lockout is not good enough. Sorry
884 +for that.
885 +<li>Happens sometimes when there are failed logins on a user, even if
886 +it is not in fact locked out.
887 +<li>Just ignore it, you may still clear the password if you wish.
888 +</ul>
889 +<p>
890 +
891 +<p>
892 +<h3>
893 +I'm not told that the account is locked out, even Windows says it
894 +is. How can I reset it?
895 +</h3>
896 +<ul>
897 +<li>Oops, probably more to the lockout stuff than I know about.
898 +<li>You can try resetting it (selection 4 from the user menu), but it
899 +may not help.
900 +<li>May have something to do with Security / Group policies, which
901 +editing of is not supported yet.
902 +<li>Unless you'd like to play with the registry editor yourself and
903 +figure it out. I cannot give lessons in registry edit.
904 +</ul>
905 +
906 +<p>
907 +<h3>
908 +The user promotion (putting user into admin group) did not work: I
909 +cannot log in!
910 +</h3>
911 +<ul>
912 +<li>Some users (like Guest often) are prevented from login by
913 +"Security policies". Does it say something like that when trying?
914 +<li>Sorry, but my program cannot change policy settings. (yet?)
915 +<li>It does not even know how to check them.
916 +<li>Sorry, nothing to do..
917 +</ul>
918 +
919 +<p>
920 +<h3>
921 +The user promotion (putting user into admin group) worked, but I
922 +cannot put user back into other groups in windows!
923 +</h3>
924 +<ul>
925 +<li>This is known to happen sometimes.
926 +<li>Try the local user part of "computer management" in
927 +"administrative tools", it is more detailed than the stupid control
928 +panel applet.
929 +<li>But that may not work, either.
930 +<li>Sorry, have no other known workarond. I told you it was experimental!
931 +</ul>
932 +
933 +<p>
934 +<p>
935 +<h3>
936 +I tried it on Win2k/2003/2008 PDC (Active Directory), and it didn't change the password.
937 +</h3>
938 +<ul>
939 +<li>ActiveDirectory (AD) is a completely different database.
940 +<li>There is no support for directly changing passwords in AD.
941 +<li>To clear things up: The Active Directory SERVER itself is not
942 +directly supported, but workstations (w2kprof) and servers (w2k server) that is
943 +just MEMBERS of the domain can have their LOCAL passwords changed by
944 +the utility.
945 +<li>But..
946 +<li>John Simpson has made <a href="http://www.jms1.net/nt-unlock.html"
947 +target="_top">
948 +instructions</a> on how to reset that pesky lost administrator password in AD.
949 +<li>Many thanks goes to John for this!
950 +<li>And I may as well in a future relase make a frontend for the
951 +screensaver trick he uses, so it will be even easier.
952 +</ul>
953 +<p>
954 +<p>
955 +<h3>
956 +What is the 'Can't access tty...' error message when I quit the
957 +floppy/cd procedure?
958 +</h3>
959 +<ul>
960 +<li>It's from the shell, and has nothing whatsoever to do with the
961 +password edit.
962 +<li>My scripts don't allocate the terminal correctly.
963 +<li>Only thing it means is that ctrl-c to break etc won't work on
964 +console 1. Should work on console 2-4 (ALT-F2 and so on)
965 +<li>Please don't ask about this in mail AGAIN!
966 +</ul>
967 +<p>
968 +<h3>
969 +My language uses characters in the usernames that are not readable
970 +with the floppy, and i cannot enter/search for them, thus not edit.
971 +</h3>
972 +<ul>
973 +<li>There is no support for the full unicode character set. Perhaps
974 +never will.
975 +<li>Select user with the RID (user ID) instead.
976 +<li>At the username prompt, enter the RID in hex, just as it is listed
977 +in the user listing. 0xfa0 for instance.
978 +</ul>
979 +<p>
980 +
981 +<p>
982 +<h3>
983 +What about support? and I just paid $$ for it on eBay!
984 +</h3>
985 +<ul>
986 +<li>Yes, some people sell it on eBay.
987 +<li>Most of them didn't bother to ask me, but I haven't cared too much
988 +about it, at least not yet.
989 +<li>If the price is reasonably low (for media, shipping etc), they offer some kind of help and
990 +support if customers need it, that's good, and no problem for me.
991 +<li>Please do not blaim me if eBay sellers can't deliver or it doesn't
992 +work, or you feel ripped off. Leave feedback on eBay instead.
993 +<li><b>I DO NOT ENDORSE ANY SPECIFIC SELLER ON eBAY!</b>
994 +<li>I give my tool away for free here, because I do not have the time
995 +for real support.
996 +<li>Usually I go through my mail 1 or 2 times a week, and I usually
997 +end up replying about 40-50% of it.
998 +<li>What I answer depends on my mood that day, what the problems
999 +are, and how they are presented.
1000 +<li>Mails with questions for which an answer can be found here in the
1001 +FAQ or on the other webpages will not be answered.
1002 +<li>Questions for drivers will almost never be answered. They take too
1003 +much time to figure out. Sorry.
1004 +<li>And.. I understand English, Norwegian, Swedish and Danish.
1005 +<li>My answers are either in English or Norwegian. (as appropriate :-)
1006 +<li><b>Thank you all for a lot of positive feedback or small tips for
1007 +improvement, I appreciate it :-) </b> even if I often don't reply to you. :-(
1008 +</ul>
1009 +
1010 +<p>
1011 +<h3>
1012 +Can I donate money?
1013 +</h3>
1014 +<ul>
1015 +<li>Not a the moment, I have closed the donations. There are several
1016 +reasons I will not talk about.
1017 +<li>But a big thank you to all that have donated, especially to some I
1018 +guess I have missed a personal reply to!
1019 +</ul>
1020 +<p>
1021 +<hr>
1022 +<p>
1023 +<a href="main.html"><img border="0" src="images/back.gif" width="98" height="20"></a><hr>
1024 +<ADDRESS>091201, [email protected]</ADDRESS>
1025 +</BODY>
1026 +</HTML>
1027 --- /dev/null
1028 +++ b/syskey.txt
1029 @@ -0,0 +1,124 @@
1030 +The Offline NT Password Editor
1031 +
1032 +(c) 1997-2002 Petter Nordahl-Hagen
1033 +
1034 +Update: 08 dec 2002
1035 +
1036 +What happens when syskey is installed, and how to get rid of it
1037 +---------------------------------------------------------------
1038 +
1039 +Background:
1040 +-----------
1041 +
1042 +Syskey was added to NT with Service Pack 3 as a way to prevent easy
1043 +access to the actual password hashes in the SAM (Security Accounts Manager)
1044 +The original methods of making and storing the hashes makes it
1045 +rather easy to bruteforce or dictionary-attack it to find the plaintext
1046 +passwords. (mostly caused by a somewhat flawed implementation & use
1047 +of the cryptoalgorithms involved, but that's discussed elsewhere)
1048 +Enabling syskey is optional, the administrator must run syskey.exe and
1049 +answer some dialog-boxes to turn it on. On Windows 2000 it's not optional
1050 +anymore, it's enabled by default at installation time.
1051 +
1052 +When syskey is active, the hashes are encrypted/obfuscated yet
1053 +another time before being stored in the SAM registry.
1054 +However, they're stored in the old form in memory after boot
1055 +(pwdump2 demonstrates this),
1056 +since the old form is needed for NTLM authentication on the network etc.
1057 +
1058 +The key that obfuscates the hashes, or rather it looks like something
1059 +that decrypts the key, can be stored on floppy, generated from a
1060 +passphrase to be entered at boot, or stored (obfuscated again) in
1061 +the registry.
1062 +
1063 +There's no official supported method to switch off syskey
1064 +once activated, except restoring the registry from a rescuefloppy
1065 +made before activation of syskey.
1066 +
1067 +So.. what's this got to do with my utility?
1068 +-------------------------------------------
1069 +
1070 +My utility doesn't try to crack passwords, it puts new hashes into
1071 +the SAM, thus changing a users password. And it does this offline.
1072 +Syskey was a showstopper for this.
1073 +As far as I can see, there's 2 ways to solve this:
1074 +
1075 +1) Find the key in registry, get user to enter it, or get hold of floppy
1076 + then use the syskey on the new password too. However, it's not documented
1077 + and I haven't found any reverse engineering of it anyplace.
1078 +
1079 +2) Try to turn it off. This has one drawback, and one good side:
1080 + Bad: all passwords must be reset, since the old hashes will be invalid.
1081 + VeryBAD: SWITHCHING OFF IN WINDOWS 2000 AND XP NOT PERFECT,
1082 + WILL CAUSE TROUBLE, but you can access the computer
1083 + afterwards. Domain relationships & syskey may be
1084 + impossible to change after this, requiring a reinstall
1085 + (or possibly only an upgrade)
1086 + Good: There's no need for the key (which may be lost).
1087 +
1088 +3) (NEW 2000-04-01, no, not a joke) Insert old styles password-hashes
1089 + into the SAM, will be converted to syskey-hashes on next boot.
1090 + This is how syskey is enabled on NT4, the hashes won't be touched
1091 + until the first reboot after turning on syskey.
1092 +
1093 +I've found out how to do #2 and #3.
1094 +
1095 +What happens when syskey is turned on, and how to turn it off again:
1096 +--------------------------------------------------------------------
1097 +
1098 +- 1 -
1099 +Serveral new keys are added to HKLM\System\CurrentControlSet\Control\Lsa,
1100 +it seems that most of the keys/values is used for the obfuscation of the key
1101 +they change when syskey is updated.
1102 +However the value named 'SecureBoot' holds the mode of syskey:
1103 + 1 - Key in registry
1104 + 2 - Enter passphrase
1105 + 3 - Key on floppy
1106 +
1107 +But removing this key (or setting it to 0) isn't enough to disable
1108 +syskey. There's more..
1109 +
1110 +- 2 -
1111 +HKLM\SAM\Domains\Account\F is a binary structure usually containing the computer
1112 +SID and some other stuff related to that.
1113 +When syskey is installed it's expanded (about twice the size), with something
1114 +I guess is the key heavily encrypted + some flags and other values.
1115 +One of these other flag/values also contains the same mode as SecureBoot above.
1116 +
1117 +So.. resetting this mode flag and SecureBoot to 0 is all that's needed
1118 +to switch off syskey in NT4 (up to SP6 at time of writing). Changing only one of them
1119 +results in a warning about inconsistencies between the SAM and system settings
1120 +on completed boot, and syskey is re-invoked.
1121 +
1122 +- 3 -
1123 +On Windows 2000 there's yet another place info about syskey is stored:
1124 +
1125 +HKLM\security\Policy\PolSecretEncryptionKey\<default>
1126 +which also is a binary structure, but also there the mode is stored.
1127 +Reset this to 0, and syskey is gone on win2k.
1128 +(if there's a mismatch between the three, it silently resets them
1129 + to the most likely value on boot)
1130 +
1131 +- 4 -
1132 +Then there's the password hashes.
1133 +The usual (old) hashlength is 16 bytes, but all hashes are expanded to 20 bytes
1134 +with syskey, the first 4 bytes looks like some kind of counter. (maybe
1135 +history-counter?).
1136 +Strangely, they're not updated at once when syskey is turned on,
1137 +update of the hashes happens during next reboot after syskey has been turned on.
1138 +And when the key is later updated, the hashes are also updated?
1139 +NO!! Strangely it SEEMS like the password hashes REMAINS THE SAME!
1140 +(however, the binaries in the 3 keys noted above changes..)
1141 +I'll try to dig more into this. Help wanted :)
1142 +
1143 +When syskey has been switched off, all passwords must be reset.
1144 +My utility will write and adjust hash-lengths of the users (usually
1145 +administrator) that you reset the password for.
1146 +NT itself will fix the rest of the hashes when you set new passwords
1147 +from NT.
1148 +
1149 +And yes, it's possible to re-enable syskey after turning it off.
1150 +(not on win2k, yet!)
1151 +
1152 +So, anybody reverse engineered the whole syskeystuff?
1153 +(yes, I know something's on it's way..)