| 1 |
# |
| 2 |
# Copyright 2024 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package os::windows::wsman::mode::sessions; |
| 22 |
|
| 23 |
use base qw(centreon::plugins::templates::counter); |
| 24 |
|
| 25 |
use strict; |
| 26 |
use warnings; |
| 27 |
use Digest::MD5 qw(md5_hex); |
| 28 |
use XML::Simple; |
| 29 |
|
| 30 |
sub set_counters { |
| 31 |
my ($self, %options) = @_; |
| 32 |
|
| 33 |
$self->{maps_counters_type} = [ |
| 34 |
{ name => 'global', type => 0, cb_prefix_output => 'prefix_global_output', }, |
| 35 |
]; |
| 36 |
|
| 37 |
$self->{maps_counters}->{global} = [ |
| 38 |
{ label => 'sessions-created', nlabel => 'sessions.created.total.count', set => { |
| 39 |
key_values => [ { name => 'sessions_created', diff => 1 } ], |
| 40 |
output_template => 'created: %s', |
| 41 |
perfdatas => [ |
| 42 |
{ label => 'sessions_created', template => '%s', min => 0 } |
| 43 |
] |
| 44 |
} |
| 45 |
}, |
| 46 |
{ label => 'sessions-disconnected', nlabel => 'sessions.disconnected.total.count', set => { |
| 47 |
key_values => [ { name => 'sessions_disconnected', diff => 1 } ], |
| 48 |
output_template => 'disconnected: %s', |
| 49 |
perfdatas => [ |
| 50 |
{ label => 'sessions_disconnected', template => '%s', min => 0 } |
| 51 |
] |
| 52 |
} |
| 53 |
}, |
| 54 |
{ label => 'sessions-reconnected', nlabel => 'sessions.reconnected.total.count', set => { |
| 55 |
key_values => [ { name => 'sessions_reconnected', diff => 1 } ], |
| 56 |
output_template => 'reconnected : %s', |
| 57 |
perfdatas => [ |
| 58 |
{ label => 'sessions_reconnected', template => '%s', min => 0 } |
| 59 |
] |
| 60 |
} |
| 61 |
}, |
| 62 |
{ label => 'sessions-active', nlabel => 'sessions.active.current.count', set => { |
| 63 |
key_values => [ { name => 'sessions_active' } ], |
| 64 |
output_template => 'current active : %s', |
| 65 |
perfdatas => [ |
| 66 |
{ label => 'sessions_active', template => '%s', min => 0 } |
| 67 |
] |
| 68 |
} |
| 69 |
}, |
| 70 |
{ label => 'sessions-disconnected-current', nlabel => 'sessions.disconnected.current.count', set => { |
| 71 |
key_values => [ { name => 'sessions_disconnected_current' } ], |
| 72 |
output_template => 'current disconnected : %s', |
| 73 |
perfdatas => [ |
| 74 |
{ label => 'sessions_disconnected_current', template => '%s', min => 0 } |
| 75 |
] |
| 76 |
} |
| 77 |
} |
| 78 |
]; |
| 79 |
} |
| 80 |
|
| 81 |
sub prefix_global_output { |
| 82 |
my ($self, %options) = @_; |
| 83 |
|
| 84 |
return "Sessions "; |
| 85 |
} |
| 86 |
|
| 87 |
sub new { |
| 88 |
my ($class, %options) = @_; |
| 89 |
my $self = $class->SUPER::new(package => __PACKAGE__, %options, statefile => 1); |
| 90 |
bless $self, $class; |
| 91 |
|
| 92 |
$options{options}->add_options(arguments => { |
| 93 |
'command:s' => { name => 'command', default => 'qwinsta' }, |
| 94 |
'command-path:s' => { name => 'command_path' }, |
| 95 |
'command-options:s' => { name => 'command_options', default => '/COUNTER' }, |
| 96 |
'timeout:s' => { name => 'timeout', default => 30 }, |
| 97 |
'filter-sessionname:s' => { name => 'filter_sessionname' }, |
| 98 |
'config:s' => { name => 'config' }, |
| 99 |
'language:s' => { name => 'language', default => 'en' } |
| 100 |
}); |
| 101 |
|
| 102 |
return $self; |
| 103 |
} |
| 104 |
|
| 105 |
sub read_config { |
| 106 |
my ($self, %options) = @_; |
| 107 |
|
| 108 |
my $content_file = <<'END_FILE'; |
| 109 |
<?xml version="1.0" encoding="UTF-8"?> |
| 110 |
<root> |
| 111 |
<qwinsta language="en"> |
| 112 |
<created>Total sessions created</created> |
| 113 |
<disconnected>Total sessions disconnected</disconnected> |
| 114 |
<reconnected>Total sessions reconnected</reconnected> |
| 115 |
<activestate>Active</activestate> |
| 116 |
<disconnectedstate>Disc</disconnectedstate> |
| 117 |
<header_sessionname>SESSIONNAME</header_sessionname> |
| 118 |
<header_state>STATE</header_state> |
| 119 |
</qwinsta> |
| 120 |
<qwinsta language="fr"> |
| 121 |
<created>Nombre total de sessions c.*?s</created> |
| 122 |
<disconnected>Nombre total de sessions d.*?connect.*?es</disconnected> |
| 123 |
<reconnected>Nombre total de sessions reconnect.*?es</reconnected> |
| 124 |
<activestate>Actif</activestate> |
| 125 |
<disconnectedstate>D.*?co</disconnectedstate> |
| 126 |
<header_sessionname>SESSION</header_sessionname> |
| 127 |
<header_state>^.*?TAT</header_state> |
| 128 |
</qwinsta> |
| 129 |
<qwinsta language="it"> |
| 130 |
<created>Totale sessioni create</created> |
| 131 |
<disconnected>Totale sessioni disconnesse</disconnected> |
| 132 |
<reconnected>Totale sessioni riconnesse</reconnected> |
| 133 |
<activestate>Attivo</activestate> |
| 134 |
<disconnectedstate>Disc</disconnectedstate> |
| 135 |
<header_sessionname>NOMESESSIONE</header_sessionname> |
| 136 |
<header_state>STATO</header_state> |
| 137 |
</qwinsta> |
| 138 |
<qwinsta language="de"> |
| 139 |
<created>Erstellte Sitzungen gesamt</created> |
| 140 |
<disconnected>Getrennte Sitzungen gesamt</disconnected> |
| 141 |
<reconnected>Erneut verbundene Sitzungen gesamt</reconnected> |
| 142 |
<activestate>Aktiv</activestate> |
| 143 |
<disconnectedstate>Getr\.</disconnectedstate> |
| 144 |
<header_sessionname>SITZUNGSNAME</header_sessionname> |
| 145 |
<header_state>STATUS</header_state> |
| 146 |
</qwinsta> |
| 147 |
</root> |
| 148 |
END_FILE |
| 149 |
|
| 150 |
if (defined($self->{option_results}->{config}) && $self->{option_results}->{config} ne '') { |
| 151 |
$content_file = do { |
| 152 |
local $/ = undef; |
| 153 |
if (!open my $fh, "<", $self->{option_results}->{config}) { |
| 154 |
$self->{output}->add_option_msg(short_msg => "Could not open file $self->{option_results}->{config} : $!"); |
| 155 |
$self->{output}->option_exit(); |
| 156 |
} |
| 157 |
<$fh>; |
| 158 |
}; |
| 159 |
} |
| 160 |
|
| 161 |
my $content; |
| 162 |
eval { |
| 163 |
$content = XMLin($content_file, ForceArray => ['qwinsta'], KeyAttr => ['language']); |
| 164 |
}; |
| 165 |
if ($@) { |
| 166 |
$self->{output}->add_option_msg(short_msg => "Cannot decode xml response: $@"); |
| 167 |
$self->{output}->option_exit(); |
| 168 |
} |
| 169 |
|
| 170 |
if (!defined($content->{qwinsta}->{$self->{option_results}->{language}})) { |
| 171 |
$self->{output}->add_option_msg(short_msg => "Cannot find language '$self->{option_results}->{language}' in config file"); |
| 172 |
$self->{output}->option_exit(); |
| 173 |
} |
| 174 |
|
| 175 |
return $content->{qwinsta}->{$self->{option_results}->{language}}; |
| 176 |
} |
| 177 |
|
| 178 |
sub read_qwinsta { |
| 179 |
my ($self, %options) = @_; |
| 180 |
|
| 181 |
$self->{output}->output_add(long_msg => $options{stdout}, debug => 1); |
| 182 |
if ($options{stdout} !~ /^(.*?)$options{config}->{created}/si) { |
| 183 |
$self->{output}->add_option_msg(short_msg => "Cannot find information in command output"); |
| 184 |
$self->{output}->option_exit(); |
| 185 |
} |
| 186 |
my $sessions = $1; |
| 187 |
|
| 188 |
my @lines = split /\n/, $sessions; |
| 189 |
my $header = shift @lines; |
| 190 |
|
| 191 |
my @position_wrap = (); |
| 192 |
while ($header =~ /(\s+(\S+))/g) { |
| 193 |
push @position_wrap, { begin => $-[1], word_begin => $-[2], end => $+[1], label => $2 }; |
| 194 |
} |
| 195 |
my $session_data = []; |
| 196 |
foreach my $line (@lines) { |
| 197 |
$line =~ s/^>/ /; |
| 198 |
my $data = {}; |
| 199 |
for (my $pos = 0; $pos <= $#position_wrap; $pos++) { |
| 200 |
my $area; |
| 201 |
|
| 202 |
if (length($line) < $position_wrap[$pos]->{begin}) { |
| 203 |
$area = ''; |
| 204 |
} else { |
| 205 |
if ($pos + 1 <= $#position_wrap) { |
| 206 |
$area = substr($line, $position_wrap[$pos]->{begin}, ($position_wrap[$pos]->{end} - $position_wrap[$pos]->{begin}) + ($position_wrap[$pos + 1]->{word_begin} - $position_wrap[$pos]->{end})); |
| 207 |
} else { |
| 208 |
$area = substr($line, $position_wrap[$pos]->{begin}); |
| 209 |
} |
| 210 |
} |
| 211 |
|
| 212 |
$data->{$position_wrap[$pos]->{label}} = '-'; |
| 213 |
while ($area =~ /([^\s]+)/g) { |
| 214 |
if (($-[1] >= $position_wrap[$pos]->{word_begin} - $position_wrap[$pos]->{begin} && $-[1] <= $position_wrap[$pos]->{end} - $position_wrap[$pos]->{begin}) |
| 215 |
|| |
| 216 |
($+[1] >= $position_wrap[$pos]->{word_begin} - $position_wrap[$pos]->{begin} && $+[1] <= $position_wrap[$pos]->{end} - $position_wrap[$pos]->{begin})) { |
| 217 |
$data->{$position_wrap[$pos]->{label}} = $1; |
| 218 |
last; |
| 219 |
} |
| 220 |
} |
| 221 |
} |
| 222 |
push @$session_data, $data; |
| 223 |
} |
| 224 |
|
| 225 |
return $session_data; |
| 226 |
} |
| 227 |
|
| 228 |
sub read_qwinsta_counters { |
| 229 |
my ($self, %options) = @_; |
| 230 |
|
| 231 |
my $counters = {}; |
| 232 |
$counters->{sessions_created} = $1 |
| 233 |
if ($options{stdout} =~ /$options{config}->{created}.*?(\d+)/si); |
| 234 |
$counters->{sessions_disconnected} = $1 |
| 235 |
if ($options{stdout} =~ /$options{config}->{disconnected}.*?(\d+)/si); |
| 236 |
$counters->{sessions_reconnected} = $1 |
| 237 |
if ($options{stdout} =~ /$options{config}->{reconnected}.*?(\d+)/si); |
| 238 |
|
| 239 |
return $counters; |
| 240 |
} |
| 241 |
|
| 242 |
sub manage_selection { |
| 243 |
my ($self, %options) = @_; |
| 244 |
$self->{wsman} = $options{wsman}; |
| 245 |
|
| 246 |
my $qwinsta_cmd; |
| 247 |
my $config = $self->read_config(); |
| 248 |
if (!defined($self->{option_results}->{command_path}) || $self->{option_results}->{command_path} eq '') { |
| 249 |
$qwinsta_cmd = $self->{option_results}->{command} . ' ' . $self->{option_results}->{command_options}; |
| 250 |
} else { |
| 251 |
$qwinsta_cmd = $self->{option_results}->{command_path} . $self->{option_results}->{command} . $self->{option_results}->{command_options}; |
| 252 |
} |
| 253 |
$self->{result} = $self->{wsman}->execute_winshell_commands(commands => [ { label => 'qwinsta', value => $qwinsta_cmd } ]); |
| 254 |
|
| 255 |
my $datas = $self->read_qwinsta(stdout => $self->{result}->{qwinsta}->{stdout}, config => $config); |
| 256 |
my $counters = $self->read_qwinsta_counters(stdout => $self->{result}->{qwinsta}->{stdout}, config => $config); |
| 257 |
|
| 258 |
my ($active, $disconnected) = (0, 0); |
| 259 |
foreach my $session (@$datas) { |
| 260 |
if (defined($self->{option_results}->{filter_sessionname}) && $self->{option_results}->{filter_sessionname} ne '' && |
| 261 |
$session->{$config->{header_sessionname}} !~ /$self->{option_results}->{filter_sessionname}/) { |
| 262 |
$self->{output}->output_add(long_msg => "skipping '" . $session->{$config->{header_sessionname}} . "': no matching filter.", debug => 1); |
| 263 |
next; |
| 264 |
} |
| 265 |
|
| 266 |
my ($matching_active, $matching_discon) = (0, 0); |
| 267 |
foreach my $label (keys %$session) { |
| 268 |
$matching_active = 1 if ($label =~ /$config->{header_state}/ && |
| 269 |
$session->{$label} =~ /$config->{activestate}/); |
| 270 |
$matching_discon = 1 if ($label =~ /$config->{header_state}/ && |
| 271 |
$session->{$label} =~ /$config->{disconnectedstate}/); |
| 272 |
} |
| 273 |
|
| 274 |
if ($matching_active == 1 || $matching_discon == 1) { |
| 275 |
$active++ if ($matching_active == 1); |
| 276 |
$disconnected++ if ($matching_discon == 1); |
| 277 |
my $output = ''; |
| 278 |
$output .= " [$_ => $session->{$_}]" for (sort keys %$session); |
| 279 |
$self->{output}->output_add(long_msg => $output); |
| 280 |
} |
| 281 |
} |
| 282 |
|
| 283 |
$self->{global} = { %$counters, sessions_active => $active, sessions_disconnected_current => $disconnected }; |
| 284 |
|
| 285 |
$self->{cache_name} = 'windows_' . $self->{mode} . '_' . |
| 286 |
(defined($self->{option_results}->{filter_counters}) ? md5_hex($self->{option_results}->{filter_counters}) : md5_hex('all')) . '_' . |
| 287 |
(defined($self->{option_results}->{filter_name}) ? md5_hex($self->{option_results}->{filter_name}) : md5_hex('all')); |
| 288 |
} |
| 289 |
|
| 290 |
1; |
| 291 |
|
| 292 |
__END__ |
| 293 |
|
| 294 |
=head1 MODE |
| 295 |
|
| 296 |
Check sessions. |
| 297 |
|
| 298 |
=over 8 |
| 299 |
|
| 300 |
=item B<--config> |
| 301 |
|
| 302 |
The command can be localized by using a configuration file. |
| 303 |
This parameter can be used to specify an alternative location for the configuration file. |
| 304 |
|
| 305 |
=item B<--language> |
| 306 |
|
| 307 |
Set the language used in config file (default: 'en'). |
| 308 |
|
| 309 |
=item B<--command> |
| 310 |
|
| 311 |
Command to get information (default: 'qwinsta'). |
| 312 |
Can be changed if you have output in a file. |
| 313 |
|
| 314 |
=item B<--command-path> |
| 315 |
|
| 316 |
Command path (default: none). |
| 317 |
|
| 318 |
=item B<--command-options> |
| 319 |
|
| 320 |
Command options (default: '/COUNTER'). |
| 321 |
|
| 322 |
=item B<--timeout> |
| 323 |
|
| 324 |
Timeout in seconds for the command (default: 30). |
| 325 |
|
| 326 |
=item B<--filter-sessionname> |
| 327 |
|
| 328 |
Filter session name (can be a regexp). |
| 329 |
|
| 330 |
=item B<--warning-*> B<--critical-*> |
| 331 |
|
| 332 |
Thresholds. |
| 333 |
Can be: 'sessions-created', 'sessions-disconnected', |
| 334 |
'sessions-reconnected', 'sessions-active', 'sessions-disconnected-current'. |
| 335 |
|
| 336 |
=back |
| 337 |
|
| 338 |
=cut |