| 1 |
# |
| 2 |
# Copyright 2018 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package network::ucopia::wlc::snmp::mode::system; |
| 22 |
|
| 23 |
use base qw(centreon::plugins::templates::counter); |
| 24 |
|
| 25 |
use strict; |
| 26 |
use warnings; |
| 27 |
use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc); |
| 28 |
|
| 29 |
sub custom_service_status_output { |
| 30 |
my ($self, %options) = @_; |
| 31 |
|
| 32 |
my $msg = sprintf("status is %s", |
| 33 |
$self->{result_values}->{status}, |
| 34 |
); |
| 35 |
return $msg; |
| 36 |
} |
| 37 |
|
| 38 |
sub custom_ha_status_output { |
| 39 |
my ($self, %options) = @_; |
| 40 |
|
| 41 |
my $msg = sprintf("high-availablity status is %s", |
| 42 |
$self->{result_values}->{ha_status}, |
| 43 |
); |
| 44 |
return $msg; |
| 45 |
} |
| 46 |
|
| 47 |
sub custom_users_output { |
| 48 |
my ($self, %options) = @_; |
| 49 |
|
| 50 |
my $msg = sprintf("%d connected users (Available licence: %s)", |
| 51 |
$self->{result_values}->{connected_users}, |
| 52 |
$self->{result_values}->{max_users} ne '' ? $self->{result_values}->{max_users} : '-' |
| 53 |
); |
| 54 |
return $msg; |
| 55 |
} |
| 56 |
|
| 57 |
sub set_counters { |
| 58 |
my ($self, %options) = @_; |
| 59 |
|
| 60 |
$self->{maps_counters_type} = [ |
| 61 |
{ name => 'global', type => 0, message_separator => ' - ', skipped_code => { -10 => 1 } }, |
| 62 |
{ name => 'service', type => 1, cb_prefix_output => 'prefix_service_output', message_multiple => 'All services are ok', skipped_code => { -10 => 1 } } |
| 63 |
]; |
| 64 |
|
| 65 |
$self->{maps_counters}->{global} = [ |
| 66 |
{ label => 'users-connected', nlabel => 'system.users.connected.count', set => { |
| 67 |
key_values => [ { name => 'connected_users' }, { name => 'max_users' } ], |
| 68 |
closure_custom_output => $self->can('custom_users_output'), |
| 69 |
perfdatas => [ |
| 70 |
{ value => 'connected_users', template => '%s', min => 0, max => 'max_users' }, |
| 71 |
], |
| 72 |
} |
| 73 |
}, |
| 74 |
{ label => 'users-connected-prct', nlabel => 'system.users.connected.percentage', display_ok => 0, set => { |
| 75 |
key_values => [ { name => 'connected_users_prct' } ], |
| 76 |
output_template => 'users connected: %.2f %%', |
| 77 |
perfdatas => [ |
| 78 |
{ value => 'connected_users_prct', template => '%.2f', unit => '%', min => 0, max => 100 }, |
| 79 |
], |
| 80 |
} |
| 81 |
}, |
| 82 |
{ label => 'ha-status', threshold => 0, set => { |
| 83 |
key_values => [ { name => 'ha_status' } ], |
| 84 |
closure_custom_calc => \&catalog_status_calc, |
| 85 |
closure_custom_output => $self->can('custom_ha_status_output'), |
| 86 |
closure_custom_perfdata => sub { return 0; }, |
| 87 |
closure_custom_threshold_check => \&catalog_status_threshold, |
| 88 |
} |
| 89 |
}, |
| 90 |
{ label => 'disk-temperature', nlabel => 'system.disk.temperature.celsius', display_ok => 0, set => { |
| 91 |
key_values => [ { name => 'disk_temperature', no_value => 0 } ], |
| 92 |
output_template => 'disk temperature: %s C', |
| 93 |
perfdatas => [ |
| 94 |
{ value => 'disk_temperature', template => '%s', unit => 'C' }, |
| 95 |
], |
| 96 |
} |
| 97 |
}, |
| 98 |
{ label => 'cpu-temperature', nlabel => 'system.cpu.temperature.celsius', display_ok => 0, set => { |
| 99 |
key_values => [ { name => 'cpu_temperature', no_value => 0 } ], |
| 100 |
output_template => 'cpu temperature: %s C', |
| 101 |
perfdatas => [ |
| 102 |
{ value => 'cpu_temperature', template => '%s', unit => 'C' }, |
| 103 |
], |
| 104 |
} |
| 105 |
}, |
| 106 |
]; |
| 107 |
|
| 108 |
$self->{maps_counters}->{service} = [ |
| 109 |
{ label => 'service-status', threshold => 0, set => { |
| 110 |
key_values => [ { name => 'status' }, { name => 'display' } ], |
| 111 |
closure_custom_calc => \&catalog_status_calc, |
| 112 |
closure_custom_output => $self->can('custom_service_status_output'), |
| 113 |
closure_custom_perfdata => sub { return 0; }, |
| 114 |
closure_custom_threshold_check => \&catalog_status_threshold, |
| 115 |
} |
| 116 |
}, |
| 117 |
]; |
| 118 |
} |
| 119 |
|
| 120 |
sub prefix_service_output { |
| 121 |
my ($self, %options) = @_; |
| 122 |
|
| 123 |
return "Service '" . $options{instance_value}->{display} . "' "; |
| 124 |
} |
| 125 |
|
| 126 |
sub new { |
| 127 |
my ($class, %options) = @_; |
| 128 |
my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1); |
| 129 |
bless $self, $class; |
| 130 |
|
| 131 |
$options{options}->add_options(arguments => { |
| 132 |
'warning-service-status:s' => { name => 'warning_service_status', default => '' }, |
| 133 |
'critical-service-status:s' => { name => 'critical_service_status', default => '%{status} eq "stopped"' }, |
| 134 |
'warning-ha-status:s' => { name => 'warning_ha_status', default => '' }, |
| 135 |
'critical-ha-status:s' => { name => 'critical_ha_status', default => '%{ha_status} eq "fault"' }, |
| 136 |
}); |
| 137 |
|
| 138 |
return $self; |
| 139 |
} |
| 140 |
|
| 141 |
sub check_options { |
| 142 |
my ($self, %options) = @_; |
| 143 |
$self->SUPER::check_options(%options); |
| 144 |
|
| 145 |
$self->change_macros(macros => [ |
| 146 |
'warning_service_status', 'critical_service_status', |
| 147 |
'warning_ha_status', 'critical_ha_status', |
| 148 |
]); |
| 149 |
} |
| 150 |
|
| 151 |
my $map_sc_status = { 1 => 'running', 2 => 'stopped', 3 => 'disabled' }; |
| 152 |
my $map_ha_status = { 0 => 'standalone', 1 => 'master', 2 => 'active', 3 => 'passive', 4 => 'fault' }; |
| 153 |
|
| 154 |
my $mapping = { |
| 155 |
totalConnectedUsers => { oid => '.1.3.6.1.4.1.31218.3.1' }, |
| 156 |
cpuTemperature => { oid => '.1.3.6.1.4.1.31218.3.3' }, |
| 157 |
diskTemperature => { oid => '.1.3.6.1.4.1.31218.3.4' }, |
| 158 |
licenseUsers => { oid => '.1.3.6.1.4.1.31218.3.5' }, |
| 159 |
highAvailabilityStatus => { oid => '.1.3.6.1.4.1.31218.3.7', map => $map_ha_status }, |
| 160 |
}; |
| 161 |
|
| 162 |
my $mapping2 = { |
| 163 |
webServer => { oid => '.1.3.6.1.4.1.31218.4.1', map => $map_sc_status }, |
| 164 |
sqlServer => { oid => '.1.3.6.1.4.1.31218.4.2', map => $map_sc_status }, |
| 165 |
urlSniffer => { oid => '.1.3.6.1.4.1.31218.4.3', map => $map_sc_status }, |
| 166 |
portal => { oid => '.1.3.6.1.4.1.31218.4.4', map => $map_sc_status }, |
| 167 |
webProxy => { oid => '.1.3.6.1.4.1.31218.4.5', map => $map_sc_status }, |
| 168 |
autodisconnect => { oid => '.1.3.6.1.4.1.31218.4.6', map => $map_sc_status }, |
| 169 |
printingServer => { oid => '.1.3.6.1.4.1.31218.4.7', map => $map_sc_status }, |
| 170 |
dhcpServer => { oid => '.1.3.6.1.4.1.31218.4.8', map => $map_sc_status }, |
| 171 |
dnsServer => { oid => '.1.3.6.1.4.1.31218.4.9', map => $map_sc_status }, |
| 172 |
staticIpManager => { oid => '.1.3.6.1.4.1.31218.4.10', map => $map_sc_status }, |
| 173 |
highAvailability => { oid => '.1.3.6.1.4.1.31218.4.11', map => $map_sc_status }, |
| 174 |
ldapDirectory => { oid => '.1.3.6.1.4.1.31218.4.12', map => $map_sc_status }, |
| 175 |
ldapReplicationManager => { oid => '.1.3.6.1.4.1.31218.4.13', map => $map_sc_status }, |
| 176 |
timeServer => { oid => '.1.3.6.1.4.1.31218.4.14', map => $map_sc_status }, |
| 177 |
radiusServer => { oid => '.1.3.6.1.4.1.31218.4.15', map => $map_sc_status }, |
| 178 |
samba => { oid => '.1.3.6.1.4.1.31218.4.16', map => $map_sc_status }, |
| 179 |
ssh => { oid => '.1.3.6.1.4.1.31218.4.17', map => $map_sc_status }, |
| 180 |
syslog => { oid => '.1.3.6.1.4.1.31218.4.18', map => $map_sc_status }, |
| 181 |
usersLog => { oid => '.1.3.6.1.4.1.31218.4.19', map => $map_sc_status }, |
| 182 |
pmsClient => { oid => '.1.3.6.1.4.1.31218.4.20', map => $map_sc_status }, |
| 183 |
}; |
| 184 |
|
| 185 |
sub manage_selection { |
| 186 |
my ($self, %options) = @_; |
| 187 |
|
| 188 |
my $snmp_result = $options{snmp}->get_leef( |
| 189 |
oids => [ map($_->{oid} . '.0', values(%$mapping)), map($_->{oid} . '.0', values(%$mapping2)) ], nothing_quit => 1 |
| 190 |
); |
| 191 |
|
| 192 |
my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0'); |
| 193 |
$self->{global} = { |
| 194 |
ha_status => $result->{highAvailabilityStatus}, |
| 195 |
disk_temperature => $result->{diskTemperature}, |
| 196 |
cpu_temperature => $result->{cpuTemperature}, |
| 197 |
connected_users => $result->{totalConnectedUsers}, |
| 198 |
max_users => defined($result->{licenseUsers}) ? $result->{licenseUsers} : '', |
| 199 |
connected_users_prct => defined($result->{licenseUsers}) && $result->{licenseUsers} != 0 ? $result->{totalConnectedUsers} * 100 / $result->{licenseUsers} : undef |
| 200 |
}; |
| 201 |
|
| 202 |
$result = $options{snmp}->map_instance(mapping => $mapping2, results => $snmp_result, instance => '0'); |
| 203 |
$self->{service} = {}; |
| 204 |
foreach (keys %$result) { |
| 205 |
$self->{service}->{$_} = { display => $_, status => $result->{$_} }; |
| 206 |
} |
| 207 |
} |
| 208 |
|
| 209 |
1; |
| 210 |
|
| 211 |
__END__ |
| 212 |
|
| 213 |
=head1 MODE |
| 214 |
|
| 215 |
Check system. |
| 216 |
|
| 217 |
=over 8 |
| 218 |
|
| 219 |
=item B<--filter-counters> |
| 220 |
|
| 221 |
Only display some counters (regexp can be used). |
| 222 |
Example: --filter-counters='service-status' |
| 223 |
|
| 224 |
=item B<--warning-service-status> |
| 225 |
|
| 226 |
Define the conditions to match for the status to be WARNING (default: ''). |
| 227 |
You can use the following variables: %{status}, %{display} |
| 228 |
|
| 229 |
=item B<--critical-service-status> |
| 230 |
|
| 231 |
Define the conditions to match for the status to be CRITICAL (default: '%{status} eq "stopped"'). |
| 232 |
You can use the following variables: %{status}, %{display} |
| 233 |
|
| 234 |
=item B<--warning-ha-status> |
| 235 |
|
| 236 |
Define the conditions to match for the status to be WARNING (default: ''). |
| 237 |
You can use the following variables: %{ha_status} |
| 238 |
|
| 239 |
=item B<--critical-ha-status> |
| 240 |
|
| 241 |
Define the conditions to match for the status to be CRITICAL (default: '%{ha_status} eq "fault"'). |
| 242 |
You can use the following variables: %{ha_status} |
| 243 |
|
| 244 |
=item B<--warning-*> B<--critical-*> |
| 245 |
|
| 246 |
Thresholds. |
| 247 |
Can be: 'users-connected', 'users-connected-prct', |
| 248 |
'disk-temperature', 'cpu-temperature'. |
| 249 |
|
| 250 |
=back |
| 251 |
|
| 252 |
=cut |