| 1 |
# |
| 2 |
# Copyright 2024 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package network::raisecom::snmp::mode::components::fan; |
| 22 |
|
| 23 |
use strict; |
| 24 |
use warnings; |
| 25 |
|
| 26 |
my %map_fan_state = ( |
| 27 |
1 => 'normal', |
| 28 |
2 => 'abnormal', |
| 29 |
); |
| 30 |
|
| 31 |
my %map_pon_fan_state = ( |
| 32 |
1 => 'normal', |
| 33 |
2 => 'abnormal', |
| 34 |
3 => 'null', |
| 35 |
4 => 'unknown', |
| 36 |
); |
| 37 |
|
| 38 |
my $mapping = { |
| 39 |
raisecomFanSpeedValue => { oid => '.1.3.6.1.4.1.8886.1.1.5.2.2.1.2' }, |
| 40 |
raisecomFanWorkState => { oid => '.1.3.6.1.4.1.8886.1.1.5.2.2.1.3', map => \%map_fan_state }, |
| 41 |
}; |
| 42 |
|
| 43 |
my $mapping_pon = { |
| 44 |
raisecomFanSpeedValue => { oid => '.1.3.6.1.4.1.8886.1.27.5.1.1.4' }, |
| 45 |
raisecomFanWorkState => { oid => '.1.3.6.1.4.1.8886.1.27.5.1.1.3', map => \%map_pon_fan_state }, |
| 46 |
}; |
| 47 |
|
| 48 |
|
| 49 |
my $oid_raisecomFanMonitorStateEntry = '.1.3.6.1.4.1.8886.1.1.5.2.2.1'; |
| 50 |
my $oid_pon_raisecomFanMonitorStateEntry = '.1.3.6.1.4.1.8886.1.27.5.1.1'; |
| 51 |
|
| 52 |
sub load { |
| 53 |
} |
| 54 |
|
| 55 |
sub check_fan { |
| 56 |
my ($self, %options) = @_; |
| 57 |
|
| 58 |
foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$options{entry}})) { |
| 59 |
next if ($oid !~ /^$mapping->{raisecomFanWorkState}->{oid}\.(.*)$/); |
| 60 |
my $instance = $1; |
| 61 |
my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $options{entry}, instance => $instance); |
| 62 |
|
| 63 |
next if ($self->check_filter(section => 'fan', instance => $instance)); |
| 64 |
|
| 65 |
$self->{components}->{fan}->{total}++; |
| 66 |
$self->{output}->output_add( |
| 67 |
long_msg => sprintf( |
| 68 |
"Fan '%s' status is '%s' [instance: %s][speed: %s]", |
| 69 |
$instance, |
| 70 |
$result->{raisecomFanWorkState}, |
| 71 |
$instance, |
| 72 |
$result->{raisecomFanSpeedValue} |
| 73 |
) |
| 74 |
); |
| 75 |
|
| 76 |
my $exit = $self->get_severity(section => 'fan', value => $result->{raisecomFanWorkState}); |
| 77 |
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { |
| 78 |
$self->{output}->output_add( |
| 79 |
severity => $exit, |
| 80 |
short_msg => sprintf( |
| 81 |
"Fan '%s' status is '%s'", |
| 82 |
$instance, |
| 83 |
$result->{raisecomFanWorkState} |
| 84 |
) |
| 85 |
); |
| 86 |
} |
| 87 |
|
| 88 |
my ($exit2, $warn, $crit) = $self->get_severity_numeric(section => 'fan.speed', instance => $instance, value => $result->{raisecomFanSpeedValue}); |
| 89 |
if (!$self->{output}->is_status(value => $exit2, compare => 'ok', litteral => 1)) { |
| 90 |
$self->{output}->output_add( |
| 91 |
severity => $exit2, |
| 92 |
short_msg => sprintf("Fan speed '%s' is %s rpm", $instance, $result->{raisecomFanSpeedValue}) |
| 93 |
); |
| 94 |
} |
| 95 |
|
| 96 |
$self->{output}->perfdata_add( |
| 97 |
unit => 'rpm', |
| 98 |
nlabel => 'hardware.fan.speed.rpm', |
| 99 |
instances => $instance, |
| 100 |
value => $result->{raisecomFanSpeedValue}, |
| 101 |
warning => $warn, |
| 102 |
critical => $crit, |
| 103 |
min => 0 |
| 104 |
); |
| 105 |
} |
| 106 |
|
| 107 |
} |
| 108 |
|
| 109 |
sub check_pon_fan { |
| 110 |
my ($self, %options) = @_; |
| 111 |
|
| 112 |
foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$options{entry}})) { |
| 113 |
next if ($oid !~ /^$mapping_pon->{raisecomFanWorkState}->{oid}\.(.*)$/); |
| 114 |
my $fan = $1; |
| 115 |
my $result = $self->{snmp}->map_instance(mapping => $mapping_pon, results => $options{entry}, instance => $fan); |
| 116 |
|
| 117 |
next if ($self->check_filter(section => 'fan', instance => $fan)); |
| 118 |
|
| 119 |
$self->{components}->{fan}->{total}++; |
| 120 |
$self->{output}->output_add( |
| 121 |
long_msg => sprintf( |
| 122 |
"Fan '%s' status is '%s' [instance: %s][speed: %s]", |
| 123 |
$fan, |
| 124 |
$result->{raisecomFanWorkState}, |
| 125 |
$fan, |
| 126 |
$result->{raisecomFanSpeedValue} |
| 127 |
) |
| 128 |
); |
| 129 |
my $exit = $self->get_severity(section => 'fan', value => $result->{raisecomFanWorkState}); |
| 130 |
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { |
| 131 |
$self->{output}->output_add( |
| 132 |
severity => $exit, |
| 133 |
short_msg => sprintf( |
| 134 |
"Fan '%s' status is '%s'", |
| 135 |
$fan, |
| 136 |
$result->{raisecomFanWorkState} |
| 137 |
) |
| 138 |
); |
| 139 |
} |
| 140 |
|
| 141 |
my ($exit2, $warn, $crit) = $self->get_severity_numeric(section => 'fan.speed', instance => $fan, value => $result->{raisecomFanSpeedValue}); |
| 142 |
if (!$self->{output}->is_status(value => $exit2, compare => 'ok', litteral => 1)) { |
| 143 |
$self->{output}->output_add( |
| 144 |
severity => $exit2, |
| 145 |
short_msg => sprintf( |
| 146 |
"Fan speed '%s' is %s rpm", |
| 147 |
$fan, |
| 148 |
$result->{raisecomFanSpeedValue} |
| 149 |
) |
| 150 |
); |
| 151 |
} |
| 152 |
|
| 153 |
$self->{output}->perfdata_add( |
| 154 |
unit => 'rpm', |
| 155 |
nlabel => 'hardware.fan.speed.rpm', |
| 156 |
instances => $fan, |
| 157 |
value => $result->{raisecomFanSpeedValue}, |
| 158 |
warning => $warn, |
| 159 |
critical => $crit, |
| 160 |
min => 0 |
| 161 |
); |
| 162 |
} |
| 163 |
} |
| 164 |
|
| 165 |
sub check { |
| 166 |
my ($self) = @_; |
| 167 |
|
| 168 |
$self->{output}->output_add(long_msg => "Checking fans"); |
| 169 |
$self->{components}->{fan} = {name => 'fan', total => 0, skip => 0}; |
| 170 |
|
| 171 |
return if ($self->check_filter(section => 'fan')); |
| 172 |
|
| 173 |
my $snmp_result = $self->{snmp}->get_table(oid => $oid_raisecomFanMonitorStateEntry); |
| 174 |
if (scalar(keys %{$snmp_result}) <= 0) { |
| 175 |
my $snmp_result_pon = $self->{snmp}->get_table(oid => $oid_pon_raisecomFanMonitorStateEntry); |
| 176 |
|
| 177 |
check_pon_fan($self, entry => $snmp_result_pon) |
| 178 |
} else { |
| 179 |
check_fan($self, entry => $snmp_result); |
| 180 |
} |
| 181 |
} |
| 182 |
|
| 183 |
1; |