Debian Codegraph @

src/network/hp/procurve/snmp/mode/interfaces.pm

raw
1 #
2 # Copyright 2024 Centreon (http://www.centreon.com/)
3 #
4 # Centreon is a full-fledged industry-strength solution that meets
5 # the needs in IT infrastructure and application monitoring for
6 # service performance.
7 #
8 # Licensed under the Apache License, Version 2.0 (the "License");
9 # you may not use this file except in compliance with the License.
10 # You may obtain a copy of the License at
11 #
12 # http://www.apache.org/licenses/LICENSE-2.0
13 #
14 # Unless required by applicable law or agreed to in writing, software
15 # distributed under the License is distributed on an "AS IS" BASIS,
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 # See the License for the specific language governing permissions and
18 # limitations under the License.
19 #
20
21 package network::hp::procurve::snmp::mode::interfaces;
22
23 use base qw(snmp_standard::mode::interfaces);
24
25 use strict;
26 use warnings;
27 use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold_ng);
28
29 sub custom_poe_status_output {
30 my ($self, %options) = @_;
31
32 return 'poe status: ' . $self->{result_values}->{poestatus};
33 }
34
35 sub set_counters_errors {
36 my ($self, %options) = @_;
37
38 $self->SUPER::set_counters_errors(%options);
39
40 push @{$self->{maps_counters}->{int}},
41 { label => 'poe-status', filter => 'add_poe', type => 2, set => {
42 key_values => [
43 { name => 'poestatus' }, { name => 'opstatus' },
44 { name => 'admstatus' }, { name => 'display' }
45 ],
46 closure_custom_output => $self->can('custom_poe_status_output'),
47 closure_custom_perfdata => sub { return 0; },
48 closure_custom_threshold_check => \&catalog_status_threshold_ng
49 }
50 },
51 { label => 'poe-power-actual', filter => 'add_poe', nlabel => 'interface.poe.power.actual.milliwatt', set => {
52 key_values => [ { name => 'poe_actual_power' }, { name => 'display' } ],
53 output_template => 'poe actual power: %s mW',
54 perfdatas => [
55 { label => 'power_actual', template => '%.2f',
56 unit => 'mW', label_extra_instance => 1, instance_use => 'display' }
57 ]
58 }
59 }
60 ;
61
62 push @{$self->{maps_counters}->{int}},
63 { label => 'input-power', filter => 'add_optical', nlabel => 'interface.input.power.dbm', set => {
64 key_values => [ { name => 'input_power' }, { name => 'display' } ],
65 output_template => 'Input Power : %s dBm',
66 perfdatas => [
67 { template => '%s', unit => 'dBm', label_extra_instance => 1, instance_use => 'display' }
68 ]
69 }
70 },
71 { label => 'bias-current', filter => 'add_optical', nlabel => 'interface.bias.current.milliampere', set => {
72 key_values => [ { name => 'bias_current' }, { name => 'display' } ],
73 output_template => 'Bias Current : %s mA',
74 perfdatas => [
75 { template => '%s', unit => 'mA', label_extra_instance => 1, instance_use => 'display' }
76 ]
77 }
78 },
79 { label => 'output-power', filter => 'add_optical', nlabel => 'interface.output.power.dbm', set => {
80 key_values => [ { name => 'output_power' }, { name => 'display' } ],
81 output_template => 'Output Power : %s dBm',
82 perfdatas => [
83 { template => '%s', unit => 'dBm', label_extra_instance => 1, instance_use => 'display' }
84 ]
85 }
86 },
87 { label => 'voltage', filter => 'add_optical', nlabel => 'interface.voltage.volt', set => {
88 key_values => [ { name => 'voltage' }, { name => 'display' } ],
89 output_template => 'Voltage : %s V',
90 perfdatas => [
91 { template => '%s', unit => 'V', label_extra_instance => 1, instance_use => 'display' }
92 ]
93 }
94 },
95 { label => 'module-temperature', filter => 'add_optical', nlabel => 'interface.module.temperature.celsius', set => {
96 key_values => [ { name => 'module_temperature' }, { name => 'display' } ],
97 output_template => 'Module Temperature : %.2f C',
98 perfdatas => [
99 { template => '%.2f', unit => 'C', label_extra_instance => 1, instance_use => 'display' }
100 ]
101 }
102 }
103 ;
104 }
105
106 sub new {
107 my ($class, %options) = @_;
108 my $self = $class->SUPER::new(package => __PACKAGE__, %options);
109 bless $self, $class;
110
111 $options{options}->add_options(arguments => {
112 'add-poe' => { name => 'add_poe' },
113 'add-optical' => { name => 'add_optical' }
114 });
115
116 return $self;
117 }
118
119 sub skip_interface {
120 my ($self, %options) = @_;
121
122 return ($self->{checking} =~ /cast|errors|traffic|poe|status|volume|optical/ ? 0 : 1);
123 }
124
125 sub check_options {
126 my ($self, %options) = @_;
127 $self->SUPER::check_options(%options);
128
129 $self->{checking} = '';
130 foreach (('add_global', 'add_status', 'add_errors', 'add_traffic', 'add_cast', 'add_speed', 'add_volume', 'add_poe', 'add_optical')) {
131 if (defined($self->{option_results}->{$_})) {
132 $self->{checking} .= $_;
133 }
134 }
135 }
136
137 sub reload_cache_custom {
138 my ($self, %options) = @_;
139
140 $options{datas}->{poe_ports} = {};
141 my $oid_hpicfPoePethPsePortOperStatus = '.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9';
142 my $snmp_result = $self->{snmp}->get_table(oid => $oid_hpicfPoePethPsePortOperStatus);
143 foreach (keys %$snmp_result) {
144 next if (! /^$oid_hpicfPoePethPsePortOperStatus\.(\d+)\.(\d+)$/);
145 $options{datas}->{poe_ports}->{$2} = $1 . '.' . $2;
146 }
147
148 $options{datas}->{optical_ports} = {};
149 my $oid_hpicfXcvrPortDesc = '.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.2';
150 $snmp_result = $self->{snmp}->get_table(oid => $oid_hpicfXcvrPortDesc);
151 foreach (keys %$snmp_result) {
152 next if (! /^$oid_hpicfXcvrPortDesc\.(\d+)$/);
153 $options{datas}->{optical_ports}->{$1} = $snmp_result->{$_};
154 }
155 }
156
157 my $mapping_optical = {
158 module_temperature => { oid => '.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.11' }, # hpicfXcvrTemp (/1000)
159 voltage => { oid => '.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.12' }, # hpicfXcvrVoltage
160 bias_current => { oid => '.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.13' }, # hpicfXcvrBias (microamp / 1000)
161 output_power => { oid => '.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.14' }, # hpicfXcvrTxPower (/1000)
162 input_power => { oid => '.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.15' } # hpicfXcvrRxPower (/1000)
163 };
164
165 my $oid_poe_status = '.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9'; # hpicfPoePethPsePortOperStatus
166 my $oid_poe_actual_power = '.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8'; # hpicfPoePethPsePortActualPower
167
168 my $map_poe_status = { 1 => 'deny', 2 => 'off', 3 => 'on' };
169
170 sub custom_load {
171 my ($self, %options) = @_;
172
173 if (defined($self->{option_results}->{add_poe})) {
174 my $ports = $self->{statefile_cache}->get(name => 'poe_ports');
175 my $instances = [];
176 foreach (@{$self->{array_interface_selected}}) {
177 push @$instances, $ports->{$_} if (defined($ports->{$_}));
178 }
179
180 if (scalar(@$instances) > 0) {
181 $self->{snmp}->load(
182 oids => [ $oid_poe_status, $oid_poe_actual_power ],
183 instances => $instances,
184 instance_regexp => '^(.*)$'
185 );
186 }
187 }
188
189 return if (!defined($self->{option_results}->{add_optical}));
190
191 my $optical_ports = $self->{statefile_cache}->get(name => 'optical_ports');
192 $self->{snmp}->load(
193 oids => [ map($_->{oid}, values(%$mapping_optical)) ],
194 instances => [keys %$optical_ports]
195 );
196 }
197
198 sub custom_add_result {
199 my ($self, %options) = @_;
200
201 if (defined($self->{option_results}->{add_poe})) {
202 my $ports = $self->{statefile_cache}->get(name => 'poe_ports');
203
204 if (defined($ports->{ $options{instance} })) {
205 my $index = $ports->{ $options{instance} };
206 if (defined($self->{results}->{$oid_poe_actual_power . '.' . $index})) {
207 $self->{int}->{ $options{instance} }->{poe_actual_power} = $self->{results}->{$oid_poe_actual_power . '.' . $index};
208 }
209
210 if (defined($self->{results}->{$oid_poe_status . '.' . $index})) {
211 $self->{int}->{ $options{instance} }->{poestatus} = $map_poe_status->{ $self->{results}->{$oid_poe_status . '.' . $index} };
212 }
213 }
214 }
215
216 return if (!defined($self->{option_results}->{add_optical}));
217
218 my $optical_ports = $self->{statefile_cache}->get(name => 'optical_ports');
219 return if (!defined($optical_ports->{ $options{instance} }));
220
221 my $result = $self->{snmp}->map_instance(mapping => $mapping_optical, results => $self->{results}, instance => $options{instance});
222
223 $self->{int}->{ $options{instance} }->{input_power} = undef;
224 if (defined($result->{input_power}) && $result->{input_power} != 0 && $result->{input_power} != -99999999) {
225 $self->{int}->{ $options{instance} }->{input_power} = $result->{input_power} / 1000;
226 }
227
228 $self->{int}->{$options{instance}}->{bias_current} = undef;
229 if (defined($result->{bias_current}) && $result->{bias_current} != 0) {
230 $self->{int}->{$options{instance}}->{bias_current} = $result->{bias_current} / 1000;
231 }
232
233 $self->{int}->{$options{instance}}->{output_power} = undef;
234 if (defined($result->{output_power}) && $result->{output_power} != 0 && $result->{output_power} != -99999999) {
235 $self->{int}->{$options{instance}}->{output_power} = $result->{output_power} / 1000;
236 }
237
238 $self->{int}->{$options{instance}}->{module_temperature} = undef;
239 if (defined($result->{module_temperature}) && $result->{module_temperature} != 0) {
240 $self->{int}->{$options{instance}}->{module_temperature} = $result->{module_temperature} / 1000;
241 }
242
243 $self->{int}->{$options{instance}}->{voltage} = undef;
244 if (defined($result->{voltage}) && $result->{voltage} != 0) {
245 $self->{int}->{$options{instance}}->{voltage} = $result->{voltage} / 10000;
246 }
247 }
248
249 1;
250
251 __END__
252
253 =head1 MODE
254
255 Check interfaces.
256
257 =over 8
258
259 =item B<--add-global>
260
261 Check global port statistics (by default if no --add-* option is set).
262
263 =item B<--add-status>
264
265 Check interface status.
266
267 =item B<--add-duplex-status>
268
269 Check duplex status (with --warning-status and --critical-status).
270
271 =item B<--add-traffic>
272
273 Check interface traffic.
274
275 =item B<--add-errors>
276
277 Check interface errors.
278
279 =item B<--add-cast>
280
281 Check interface cast.
282
283 =item B<--add-speed>
284
285 Check interface speed.
286
287 =item B<--add-volume>
288
289 Check interface data volume between two checks (not supposed to be graphed, useful for BI reporting).
290
291 =item B<--add-poe>
292
293 Check power over thernet.
294
295 =item B<--add-optical>
296
297 Check interface optical metrics.
298
299 =item B<--check-metrics>
300
301 If the expression is true, metrics are checked (default: '%{opstatus} eq "up"').
302
303 =item B<--warning-status>
304
305 Define the conditions to match for the status to be WARNING.
306 You can use the following variables: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display}
307
308 =item B<--critical-status>
309
310 Define the conditions to match for the status to be CRITICAL (default: '%{admstatus} eq "up" and %{opstatus} ne "up"').
311 You can use the following variables: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display}
312
313 =item B<--warning-poe-status>
314
315 Set warning threshold for poe status.
316 You can use the following variables: %{admstatus}, %{opstatus}, %{poestatus}, %{display}
317
318 =item B<--critical-poe-status>
319
320 Define the conditions to match for the status to be CRITICAL.
321 You can use the following variables: %{admstatus}, %{opstatus}, %{poestatus}, %{display}
322
323 =item B<--warning-*> B<--critical-*>
324
325 Thresholds.
326 Can be: 'total-port', 'total-admin-up', 'total-admin-down', 'total-oper-up', 'total-oper-down',
327 'in-traffic', 'out-traffic', 'in-error', 'in-discard', 'out-error', 'out-discard',
328 'in-ucast', 'in-bcast', 'in-mcast', 'out-ucast', 'out-bcast', 'out-mcast',
329 'speed' (b/s).
330
331 And also: 'input-power' (dBm), 'bias-current' (mA), 'output-power' (dBm), 'voltage' (mV), 'module-temperature' (C), 'poe-power-actual'.
332
333 =item B<--units-traffic>
334
335 Units of thresholds for the traffic (default: 'percent_delta') ('percent_delta', 'bps', 'counter').
336
337 =item B<--units-errors>
338
339 Units of thresholds for errors/discards (default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'deltaps', 'counter').
340
341 =item B<--units-cast>
342
343 Units of thresholds for communication types (default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'deltaps', 'counter').
344
345 =item B<--nagvis-perfdata>
346
347 Display traffic perfdata to be compatible with nagvis widget.
348
349 =item B<--interface>
350
351 Set the interface (number expected) example: 1,2,... (empty means 'check all interfaces').
352
353 =item B<--name>
354
355 Allows you to define the interface (in option --interface) by name instead of OID index. The name matching mode supports regular expressions.
356
357 =item B<--speed>
358
359 Set interface speed for incoming/outgoing traffic (in Mb).
360
361 =item B<--speed-in>
362
363 Set interface speed for incoming traffic (in Mb).
364
365 =item B<--speed-out>
366
367 Set interface speed for outgoing traffic (in Mb).
368
369 =item B<--force-counters32>
370
371 Force to use 32 bits counters (even in snmp v2c and v3). Should be used when 64 bits counters are buggy.
372
373 =item B<--reload-cache-time>
374
375 Time in minutes before reloading cache file (default: 180).
376
377 =item B<--oid-filter>
378
379 Define the OID to be used to filter interfaces (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr).
380
381 =item B<--oid-display>
382
383 Define the OID that will be used to name the interfaces (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr).
384
385 =item B<--oid-extra-display>
386
387 Add an OID to display.
388
389 =item B<--display-transform-src> B<--display-transform-dst>
390
391 Modify the interface name displayed by using a regular expression.
392
393 Example: adding --display-transform-src='eth' --display-transform-dst='ens' will replace all occurrences of 'eth' with 'ens'
394
395 =item B<--show-cache>
396
397 Display cache interface data.
398
399 =back
400
401 =cut