| 1 |
# |
| 2 |
# Copyright 2024 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package centreon::common::aruba::snmp::mode::apstatus; |
| 22 |
|
| 23 |
use base qw(centreon::plugins::templates::counter); |
| 24 |
|
| 25 |
use strict; |
| 26 |
use warnings; |
| 27 |
use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold); |
| 28 |
|
| 29 |
sub custom_status_output { |
| 30 |
my ($self, %options) = @_; |
| 31 |
|
| 32 |
my $msg = sprintf("Status is '%s' [Ip: %s][Group: %s][Location: %s]", |
| 33 |
$self->{result_values}->{status}, |
| 34 |
$self->{result_values}->{ip}, |
| 35 |
$self->{result_values}->{group}, |
| 36 |
$self->{result_values}->{location} |
| 37 |
); |
| 38 |
return $msg; |
| 39 |
} |
| 40 |
|
| 41 |
sub custom_status_calc { |
| 42 |
my ($self, %options) = @_; |
| 43 |
|
| 44 |
$self->{result_values}->{name} = $options{new_datas}->{$self->{instance} . '_wlanAPName'}; |
| 45 |
$self->{result_values}->{status} = $options{new_datas}->{$self->{instance} . '_wlanAPStatus'}; |
| 46 |
$self->{result_values}->{ip} = $options{new_datas}->{$self->{instance} . '_wlanAPIpAddress'}; |
| 47 |
$self->{result_values}->{group} = $options{new_datas}->{$self->{instance} . '_wlanAPGroupName'}; |
| 48 |
$self->{result_values}->{location} = $options{new_datas}->{$self->{instance} . '_wlanAPLocation'}; |
| 49 |
return 0; |
| 50 |
} |
| 51 |
|
| 52 |
sub set_counters { |
| 53 |
my ($self, %options) = @_; |
| 54 |
|
| 55 |
$self->{maps_counters_type} = [ |
| 56 |
{ name => 'global', type => 0, cb_init => 'skip_global' }, |
| 57 |
{ name => 'ap', type => 1, cb_prefix_output => 'prefix_output', |
| 58 |
message_multiple => 'All AP status are ok' }, |
| 59 |
]; |
| 60 |
|
| 61 |
$self->{maps_counters}->{global} = [ |
| 62 |
{ label => 'connected-current', nlabel => 'accesspoints.connected.current.count', set => { |
| 63 |
key_values => [ { name => 'connected' } ], |
| 64 |
output_template => 'Total connected AP: %d', |
| 65 |
perfdatas => [ |
| 66 |
{ value => 'connected', template => '%d', min => 0 }, |
| 67 |
], |
| 68 |
} |
| 69 |
}, |
| 70 |
]; |
| 71 |
|
| 72 |
$self->{maps_counters}->{ap} = [ |
| 73 |
{ label => 'status', threshold => 0, set => { |
| 74 |
key_values => [ { name => 'wlanAPName' }, { name => 'wlanAPIpAddress' }, { name => 'wlanAPGroupName' }, |
| 75 |
{ name => 'wlanAPLocation' }, { name => 'wlanAPStatus' } ], |
| 76 |
closure_custom_calc => $self->can('custom_status_calc'), |
| 77 |
closure_custom_output => $self->can('custom_status_output'), |
| 78 |
closure_custom_perfdata => sub { return 0; }, |
| 79 |
closure_custom_threshold_check => \&catalog_status_threshold, |
| 80 |
} |
| 81 |
}, |
| 82 |
{ label => 'uptime', nlabel => 'accesspoint.uptime.seconds', set => { |
| 83 |
key_values => [ { name => 'wlanAPUpTime' }, { name => 'wlanAPName' } ], |
| 84 |
output_template => 'Uptime: %ss', |
| 85 |
perfdatas => [ |
| 86 |
{ value => 'wlanAPUpTime', template => '%s', |
| 87 |
unit => 's', label_extra_instance => 1, instance_use => 'wlanAPName' }, |
| 88 |
], |
| 89 |
} |
| 90 |
}, |
| 91 |
{ label => 'controller-bootstrap', nlabel => 'accesspoint.controller.bootstrap.count', set => { |
| 92 |
key_values => [ { name => 'wlanAPNumBootstraps' }, { name => 'wlanAPName' } ], |
| 93 |
output_template => 'Controller Bootstrap Count: %d', |
| 94 |
perfdatas => [ |
| 95 |
{ value => 'wlanAPNumBootstraps', template => '%d', |
| 96 |
label_extra_instance => 1, instance_use => 'wlanAPName' }, |
| 97 |
], |
| 98 |
} |
| 99 |
}, |
| 100 |
{ label => 'reboot', nlabel => 'accesspoint.reboot.count', set => { |
| 101 |
key_values => [ { name => 'wlanAPNumReboots' }, { name => 'wlanAPName' } ], |
| 102 |
output_template => 'Reboot Count: %d', |
| 103 |
perfdatas => [ |
| 104 |
{ value => 'wlanAPNumReboots', template => '%d', |
| 105 |
label_extra_instance => 1, instance_use => 'wlanAPName' }, |
| 106 |
], |
| 107 |
} |
| 108 |
}, |
| 109 |
]; |
| 110 |
} |
| 111 |
|
| 112 |
sub skip_global { |
| 113 |
my ($self, %options) = @_; |
| 114 |
|
| 115 |
scalar(keys %{$self->{ap}}) > 1 ? return(0) : return(1); |
| 116 |
} |
| 117 |
|
| 118 |
sub prefix_output { |
| 119 |
my ($self, %options) = @_; |
| 120 |
|
| 121 |
return "AP '" . $options{instance_value}->{wlanAPName} . "' "; |
| 122 |
} |
| 123 |
|
| 124 |
sub new { |
| 125 |
my ($class, %options) = @_; |
| 126 |
my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1); |
| 127 |
bless $self, $class; |
| 128 |
|
| 129 |
$options{options}->add_options(arguments => { |
| 130 |
'filter-ip:s' => { name => 'filter_ip' }, |
| 131 |
'filter-name:s' => { name => 'filter_name' }, |
| 132 |
'filter-group:s' => { name => 'filter_group' }, |
| 133 |
'warning-status:s' => { name => 'warning_status' }, |
| 134 |
'critical-status:s' => { name => 'critical_status', default => '%{status} !~ /up/i' }, |
| 135 |
}); |
| 136 |
|
| 137 |
return $self; |
| 138 |
} |
| 139 |
|
| 140 |
sub check_options { |
| 141 |
my ($self, %options) = @_; |
| 142 |
$self->SUPER::check_options(%options); |
| 143 |
|
| 144 |
$self->change_macros(macros => ['warning_status', 'critical_status']); |
| 145 |
} |
| 146 |
|
| 147 |
my $map_status = { 1 => 'up', 2 => 'down' }; |
| 148 |
|
| 149 |
my $oid_wlsxWlanAPTable = '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1'; |
| 150 |
|
| 151 |
my $mapping_info = { |
| 152 |
wlanAPIpAddress => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.2' }, |
| 153 |
wlanAPName => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.3' }, |
| 154 |
wlanAPGroupName => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4' }, |
| 155 |
}; |
| 156 |
my $mapping_stat = { |
| 157 |
wlanAPUpTime => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.12' }, |
| 158 |
wlanAPLocation => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.14' }, |
| 159 |
wlanAPStatus => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.19', map => $map_status }, |
| 160 |
wlanAPNumBootstraps => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.20' }, |
| 161 |
wlanAPNumReboots => { oid => '.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.21' }, |
| 162 |
}; |
| 163 |
|
| 164 |
sub manage_selection { |
| 165 |
my ($self, %options) = @_; |
| 166 |
|
| 167 |
$self->{global}->{connected} = 0; |
| 168 |
$self->{ap} = {}; |
| 169 |
|
| 170 |
my $snmp_info = $options{snmp}->get_table( |
| 171 |
oid => $oid_wlsxWlanAPTable, |
| 172 |
start => $mapping_info->{wlanAPIpAddress}->{oid}, |
| 173 |
end => $mapping_info->{wlanAPGroupName}->{oid}, |
| 174 |
nothing_quit => 1 |
| 175 |
); |
| 176 |
|
| 177 |
foreach my $oid (keys %{$snmp_info}) { |
| 178 |
next if ($oid !~ /^$mapping_info->{wlanAPIpAddress}->{oid}\.(.*)/); |
| 179 |
my $instance = $1; |
| 180 |
|
| 181 |
my $result = $options{snmp}->map_instance( |
| 182 |
mapping => $mapping_info, |
| 183 |
results => $snmp_info, |
| 184 |
instance => $instance |
| 185 |
); |
| 186 |
|
| 187 |
if (defined($self->{option_results}->{filter_ip}) && $self->{option_results}->{filter_ip} ne '' && |
| 188 |
$result->{wlanAPIpAddress} !~ /$self->{option_results}->{filter_ip}/) { |
| 189 |
$self->{output}->output_add(long_msg => "skipping '" . $result->{wlanAPIpAddress} . "': no matching filter ip.", debug => 1); |
| 190 |
next; |
| 191 |
} |
| 192 |
if (defined($self->{option_results}->{filter_name}) && $self->{option_results}->{filter_name} ne '' && |
| 193 |
$result->{wlanAPName} !~ /$self->{option_results}->{filter_name}/) { |
| 194 |
$self->{output}->output_add(long_msg => "skipping '" . $result->{wlanAPName} . "': no matching filter name.", debug => 1); |
| 195 |
next; |
| 196 |
} |
| 197 |
if (defined($self->{option_results}->{filter_group}) && $self->{option_results}->{filter_group} ne '' && |
| 198 |
$result->{wlanAPGroupName} !~ /$self->{option_results}->{filter_group}/) { |
| 199 |
$self->{output}->output_add(long_msg => "skipping '" . $result->{wlanAPGroupName} . "': no matching filter group.", debug => 1); |
| 200 |
next; |
| 201 |
} |
| 202 |
|
| 203 |
$self->{ap}->{$instance} = { %{$result} }; |
| 204 |
} |
| 205 |
|
| 206 |
if (scalar(keys %{$self->{ap}}) <= 0) { |
| 207 |
$self->{output}->add_option_msg(short_msg => "No AP found."); |
| 208 |
$self->{output}->option_exit(); |
| 209 |
} |
| 210 |
|
| 211 |
$options{snmp}->load( |
| 212 |
oids => [ |
| 213 |
$mapping_stat->{wlanAPUpTime}->{oid}, |
| 214 |
$mapping_stat->{wlanAPLocation}->{oid}, |
| 215 |
$mapping_stat->{wlanAPStatus}->{oid}, |
| 216 |
$mapping_stat->{wlanAPNumBootstraps}->{oid}, |
| 217 |
$mapping_stat->{wlanAPNumReboots}->{oid}, |
| 218 |
], |
| 219 |
instances => [ keys %{$self->{ap}} ], |
| 220 |
instance_regexp => '^(.*)$' |
| 221 |
); |
| 222 |
|
| 223 |
my $snmp_result = $options{snmp}->get_leef(nothing_quit => 1); |
| 224 |
|
| 225 |
foreach my $oid (keys %{$snmp_result}) { |
| 226 |
next if ($oid !~ /^$mapping_stat->{wlanAPUpTime}->{oid}\.(.*)/); |
| 227 |
my $instance = $1; |
| 228 |
|
| 229 |
my $result = $options{snmp}->map_instance( |
| 230 |
mapping => $mapping_stat, |
| 231 |
results => $snmp_result, |
| 232 |
instance => $instance |
| 233 |
); |
| 234 |
|
| 235 |
$self->{ap}->{$instance} = { %{$self->{ap}->{$instance}}, %{$result}, wlanAPUpTime => $result->{wlanAPUpTime} / 100 }; |
| 236 |
$self->{global}->{connected}++; |
| 237 |
} |
| 238 |
} |
| 239 |
|
| 240 |
1; |
| 241 |
|
| 242 |
__END__ |
| 243 |
|
| 244 |
=head1 MODE |
| 245 |
|
| 246 |
Check AP status (WLSX-WLAN-MIB). |
| 247 |
|
| 248 |
=over 8 |
| 249 |
|
| 250 |
=item B<--warning-*> B<--critical-*> |
| 251 |
|
| 252 |
Thresholds. |
| 253 |
Can be: 'connected-current' (global), 'uptime', |
| 254 |
'controller-bootstrap', 'reboot', 'status' (per AP). |
| 255 |
|
| 256 |
'status' can use special variables like: %{name}, |
| 257 |
%{status}, %{ip}, %{group}, %{location} (default: '') |
| 258 |
|
| 259 |
=item B<--filter-*> |
| 260 |
|
| 261 |
Filter by 'ip', 'name', 'group' (regexp can be used). |
| 262 |
|
| 263 |
=back |
| 264 |
|
| 265 |
=cut |