| 1 |
# |
| 2 |
# Copyright 2024 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package apps::thales::mistral::vs9::restapi::mode::devices; |
| 22 |
|
| 23 |
use base qw(centreon::plugins::templates::counter); |
| 24 |
|
| 25 |
use strict; |
| 26 |
use warnings; |
| 27 |
use Digest::MD5; |
| 28 |
use DateTime; |
| 29 |
use POSIX; |
| 30 |
use centreon::plugins::misc; |
| 31 |
use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold_ng); |
| 32 |
|
| 33 |
my $unitdiv = { s => 1, w => 604800, d => 86400, h => 3600, m => 60 }; |
| 34 |
my $unitdiv_long = { s => 'seconds', w => 'weeks', d => 'days', h => 'hours', m => 'minutes' }; |
| 35 |
|
| 36 |
sub custom_certificate_status_output { |
| 37 |
my ($self, %options) = @_; |
| 38 |
|
| 39 |
return sprintf( |
| 40 |
'revoked: %s', |
| 41 |
$self->{result_values}->{revoked} |
| 42 |
); |
| 43 |
} |
| 44 |
|
| 45 |
sub custom_certificate_expires_perfdata { |
| 46 |
my ($self, %options) = @_; |
| 47 |
|
| 48 |
$self->{output}->perfdata_add( |
| 49 |
nlabel => $self->{nlabel} . '.' . $unitdiv_long->{ $self->{instance_mode}->{option_results}->{time_certificate_unit} }, |
| 50 |
unit => $self->{instance_mode}->{option_results}->{time_certificate_unit}, |
| 51 |
instances => [ |
| 52 |
$self->{result_values}->{sn}, |
| 53 |
$self->{result_values}->{certSn}, |
| 54 |
$self->{result_values}->{subjectCommonName}, |
| 55 |
$self->{result_values}->{issuerCommonName} |
| 56 |
], |
| 57 |
value => floor($self->{result_values}->{expires_seconds} / $unitdiv->{ $self->{instance_mode}->{option_results}->{time_certificate_unit} }), |
| 58 |
warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), |
| 59 |
critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}), |
| 60 |
min => 0 |
| 61 |
); |
| 62 |
} |
| 63 |
|
| 64 |
sub custom_certificate_expires_threshold { |
| 65 |
my ($self, %options) = @_; |
| 66 |
|
| 67 |
return $self->{perfdata}->threshold_check( |
| 68 |
value => floor($self->{result_values}->{expires_seconds} / $unitdiv->{ $self->{instance_mode}->{option_results}->{time_certificate_unit} }), |
| 69 |
threshold => [ |
| 70 |
{ label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, |
| 71 |
{ label => 'warning-'. $self->{thlabel}, exit_litteral => 'warning' }, |
| 72 |
{ label => 'unknown-'. $self->{thlabel}, exit_litteral => 'unknown' } |
| 73 |
] |
| 74 |
); |
| 75 |
} |
| 76 |
|
| 77 |
sub custom_time_offset_output { |
| 78 |
my ($self, %options) = @_; |
| 79 |
|
| 80 |
return sprintf( |
| 81 |
'time offset %d second(s): %s', |
| 82 |
$self->{result_values}->{offset}, |
| 83 |
$self->{result_values}->{date} |
| 84 |
); |
| 85 |
} |
| 86 |
|
| 87 |
sub custom_uptime_output { |
| 88 |
my ($self, %options) = @_; |
| 89 |
|
| 90 |
return sprintf( |
| 91 |
'uptime: %s', |
| 92 |
centreon::plugins::misc::change_seconds(value => $self->{result_values}->{uptime}, start => 'd') |
| 93 |
); |
| 94 |
} |
| 95 |
|
| 96 |
sub custom_uptime_perfdata { |
| 97 |
my ($self, %options) = @_; |
| 98 |
|
| 99 |
$self->{output}->perfdata_add( |
| 100 |
nlabel => 'system.uptime.' . $unitdiv_long->{ $self->{instance_mode}->{option_results}->{time_uptime_unit} }, |
| 101 |
unit => $self->{instance_mode}->{option_results}->{time_uptime_unit}, |
| 102 |
instances => $self->{result_values}->{sn}, |
| 103 |
value => floor($self->{result_values}->{uptime} / $unitdiv->{ $self->{instance_mode}->{option_results}->{time_uptime_unit} }), |
| 104 |
warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), |
| 105 |
critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}), |
| 106 |
min => 0 |
| 107 |
); |
| 108 |
} |
| 109 |
|
| 110 |
sub custom_uptime_threshold { |
| 111 |
my ($self, %options) = @_; |
| 112 |
|
| 113 |
return $self->{perfdata}->threshold_check( |
| 114 |
value => floor($self->{result_values}->{uptime} / $unitdiv->{ $self->{instance_mode}->{option_results}->{time_uptime_unit} }), |
| 115 |
threshold => [ |
| 116 |
{ label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, |
| 117 |
{ label => 'warning-'. $self->{thlabel}, exit_litteral => 'warning' }, |
| 118 |
{ label => 'unknown-'. $self->{thlabel}, exit_litteral => 'unknown' } |
| 119 |
] |
| 120 |
); |
| 121 |
} |
| 122 |
|
| 123 |
sub custom_mistral_version_output { |
| 124 |
my ($self, %options) = @_; |
| 125 |
|
| 126 |
return sprintf( |
| 127 |
'firmware version: %s (current) %s (other), configurationId: %s', |
| 128 |
$self->{result_values}->{firmwareCurrentVersion}, |
| 129 |
$self->{result_values}->{firmwareOtherVersion}, |
| 130 |
$self->{result_values}->{configurationId} |
| 131 |
); |
| 132 |
} |
| 133 |
|
| 134 |
sub custom_system_version_output { |
| 135 |
my ($self, %options) = @_; |
| 136 |
|
| 137 |
return sprintf( |
| 138 |
'system os: %s %s', |
| 139 |
$self->{result_values}->{osName}, |
| 140 |
$self->{result_values}->{osRelease} |
| 141 |
); |
| 142 |
} |
| 143 |
|
| 144 |
sub custom_traffic_perfdata { |
| 145 |
my ($self, %options) = @_; |
| 146 |
|
| 147 |
my ($warning, $critical); |
| 148 |
if ($self->{instance_mode}->{option_results}->{traffic_unit} eq 'percent_delta' && defined($self->{result_values}->{speed})) { |
| 149 |
$warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}, total => $self->{result_values}->{speed}, cast_int => 1); |
| 150 |
$critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}, total => $self->{result_values}->{speed}, cast_int => 1); |
| 151 |
} elsif ($self->{instance_mode}->{option_results}->{traffic_unit} =~ /bps|counter/) { |
| 152 |
$warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}); |
| 153 |
$critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}); |
| 154 |
} |
| 155 |
|
| 156 |
if ($self->{instance_mode}->{option_results}->{traffic_unit} eq 'counter') { |
| 157 |
my $nlabel = $self->{nlabel}; |
| 158 |
$nlabel =~ s/bitspersecond/bits/; |
| 159 |
$self->{output}->perfdata_add( |
| 160 |
nlabel => $nlabel, |
| 161 |
unit => 'b', |
| 162 |
instances => [$self->{result_values}->{sn}, $self->{result_values}->{name}], |
| 163 |
value => $self->{result_values}->{traffic_counter}, |
| 164 |
warning => $warning, |
| 165 |
critical => $critical, |
| 166 |
min => 0 |
| 167 |
); |
| 168 |
} else { |
| 169 |
$self->{output}->perfdata_add( |
| 170 |
nlabel => $self->{nlabel}, |
| 171 |
instances => [$self->{result_values}->{sn}, $self->{result_values}->{name}], |
| 172 |
value => sprintf('%.2f', $self->{result_values}->{traffic_per_seconds}), |
| 173 |
warning => $warning, |
| 174 |
critical => $critical, |
| 175 |
min => 0, max => $self->{result_values}->{speed} |
| 176 |
); |
| 177 |
} |
| 178 |
} |
| 179 |
|
| 180 |
sub custom_traffic_threshold { |
| 181 |
my ($self, %options) = @_; |
| 182 |
|
| 183 |
my $exit = 'ok'; |
| 184 |
if ($self->{instance_mode}->{option_results}->{traffic_unit} eq 'percent_delta' && defined($self->{result_values}->{speed})) { |
| 185 |
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_prct}, threshold => [ { label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, { label => 'warning-' . $self->{thlabel}, exit_litteral => 'warning' } ]); |
| 186 |
} elsif ($self->{instance_mode}->{option_results}->{traffic_unit} eq 'bps') { |
| 187 |
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_per_seconds}, threshold => [ { label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, { label => 'warning-' . $self->{thlabel}, exit_litteral => 'warning' } ]); |
| 188 |
} elsif ($self->{instance_mode}->{option_results}->{traffic_unit} eq 'counter') { |
| 189 |
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_counter}, threshold => [ { label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, { label => 'warning-' . $self->{thlabel}, exit_litteral => 'warning' } ]); |
| 190 |
} |
| 191 |
return $exit; |
| 192 |
} |
| 193 |
|
| 194 |
sub custom_traffic_output { |
| 195 |
my ($self, %options) = @_; |
| 196 |
|
| 197 |
my ($traffic_value, $traffic_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{traffic_per_seconds}, network => 1); |
| 198 |
return sprintf( |
| 199 |
'traffic %s: %s/s (%s)', |
| 200 |
$self->{result_values}->{label}, $traffic_value . $traffic_unit, |
| 201 |
defined($self->{result_values}->{traffic_prct}) ? sprintf('%.2f%%', $self->{result_values}->{traffic_prct}) : '-' |
| 202 |
); |
| 203 |
} |
| 204 |
|
| 205 |
sub custom_traffic_calc { |
| 206 |
my ($self, %options) = @_; |
| 207 |
|
| 208 |
$self->{result_values}->{traffic_per_seconds} = ($options{new_datas}->{ $self->{instance} . '_' . $options{extra_options}->{label_ref} } - $options{old_datas}->{ $self->{instance} . '_' . $options{extra_options}->{label_ref} }) / $options{delta_time}; |
| 209 |
$self->{result_values}->{traffic_counter} = $options{new_datas}->{ $self->{instance} . '_' . $options{extra_options}->{label_ref} }; |
| 210 |
|
| 211 |
$self->{result_values}->{traffic_per_seconds} = sprintf('%d', $self->{result_values}->{traffic_per_seconds}); |
| 212 |
|
| 213 |
if (defined($options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}}) && |
| 214 |
$options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}} ne '' && |
| 215 |
$options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}} > 0) { |
| 216 |
$self->{result_values}->{traffic_prct} = $self->{result_values}->{traffic_per_seconds} * 100 / $options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}}; |
| 217 |
$self->{result_values}->{speed} = $options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}}; |
| 218 |
} |
| 219 |
|
| 220 |
$self->{result_values}->{label} = $options{extra_options}->{label_ref}; |
| 221 |
$self->{result_values}->{sn} = $options{new_datas}->{$self->{instance} . '_sn'}; |
| 222 |
$self->{result_values}->{name} = $options{new_datas}->{$self->{instance} . '_name'}; |
| 223 |
return 0; |
| 224 |
} |
| 225 |
|
| 226 |
sub custom_connection_perfdata { |
| 227 |
my ($self, %options) = @_; |
| 228 |
|
| 229 |
$self->{output}->perfdata_add( |
| 230 |
nlabel => $self->{nlabel} . '.' . $unitdiv_long->{ $self->{instance_mode}->{option_results}->{time_connection_unit} }, |
| 231 |
unit => $self->{instance_mode}->{option_results}->{time_connection_unit}, |
| 232 |
instances => $self->{result_values}->{sn}, |
| 233 |
value => floor($self->{result_values}->{connection_seconds} / $unitdiv->{ $self->{instance_mode}->{option_results}->{time_connection_unit} }), |
| 234 |
warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), |
| 235 |
critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}), |
| 236 |
min => 0 |
| 237 |
); |
| 238 |
} |
| 239 |
|
| 240 |
sub custom_connection_threshold { |
| 241 |
my ($self, %options) = @_; |
| 242 |
|
| 243 |
return $self->{perfdata}->threshold_check( |
| 244 |
value => floor($self->{result_values}->{connection_seconds} / $unitdiv->{ $self->{instance_mode}->{option_results}->{time_connection_unit} }), |
| 245 |
threshold => [ |
| 246 |
{ label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, |
| 247 |
{ label => 'warning-'. $self->{thlabel}, exit_litteral => 'warning' }, |
| 248 |
{ label => 'unknown-'. $self->{thlabel}, exit_litteral => 'unknown' } |
| 249 |
] |
| 250 |
); |
| 251 |
} |
| 252 |
|
| 253 |
sub device_long_output { |
| 254 |
my ($self, %options) = @_; |
| 255 |
|
| 256 |
return sprintf( |
| 257 |
"checking device '%s'", |
| 258 |
$options{instance_value}->{sn} |
| 259 |
); |
| 260 |
} |
| 261 |
|
| 262 |
sub prefix_device_output { |
| 263 |
my ($self, %options) = @_; |
| 264 |
|
| 265 |
return sprintf( |
| 266 |
"device '%s' ", |
| 267 |
$options{instance_value}->{sn} |
| 268 |
); |
| 269 |
} |
| 270 |
|
| 271 |
sub prefix_global_output { |
| 272 |
my ($self, %options) = @_; |
| 273 |
|
| 274 |
return 'Number of devices '; |
| 275 |
} |
| 276 |
|
| 277 |
sub prefix_interface_output { |
| 278 |
my ($self, %options) = @_; |
| 279 |
|
| 280 |
return sprintf( |
| 281 |
"interface '%s' ", |
| 282 |
$options{instance_value}->{name} |
| 283 |
); |
| 284 |
} |
| 285 |
|
| 286 |
sub prefix_autotest_output { |
| 287 |
my ($self, %options) = @_; |
| 288 |
|
| 289 |
return sprintf( |
| 290 |
"autotest '%s' ", |
| 291 |
$options{instance_value}->{name} |
| 292 |
); |
| 293 |
} |
| 294 |
|
| 295 |
sub prefix_certificate_output { |
| 296 |
my ($self, %options) = @_; |
| 297 |
|
| 298 |
return sprintf( |
| 299 |
"certificate '%s' [subject: %s, issuer: %s, usages: %s] ", |
| 300 |
$options{instance_value}->{certSn}, |
| 301 |
$options{instance_value}->{subjectCommonName}, |
| 302 |
$options{instance_value}->{issuerCommonName}, |
| 303 |
$options{instance_value}->{usages} |
| 304 |
); |
| 305 |
} |
| 306 |
|
| 307 |
sub prefix_ike_sa_output { |
| 308 |
my ($self, %options) = @_; |
| 309 |
|
| 310 |
return sprintf( |
| 311 |
"vpn ike sa '%s' ", |
| 312 |
$options{instance_value}->{name} |
| 313 |
); |
| 314 |
} |
| 315 |
|
| 316 |
sub prefix_sa_output { |
| 317 |
my ($self, %options) = @_; |
| 318 |
|
| 319 |
return sprintf( |
| 320 |
"vpn sa '%s' ", |
| 321 |
$options{instance_value}->{name} |
| 322 |
); |
| 323 |
} |
| 324 |
|
| 325 |
sub set_counters { |
| 326 |
my ($self, %options) = @_; |
| 327 |
|
| 328 |
$self->{maps_counters_type} = [ |
| 329 |
{ name => 'global', type => 0, cb_prefix_output => 'prefix_global_output' }, |
| 330 |
{ |
| 331 |
name => 'devices', type => 3, cb_prefix_output => 'prefix_device_output', cb_long_output => 'device_long_output', indent_long_output => ' ', message_multiple => 'All devices are ok', |
| 332 |
group => [ |
| 333 |
{ name => 'system', type => 0, skipped_code => { -10 => 1 } }, |
| 334 |
{ name => 'connection', type => 0, skipped_code => { -10 => 1 } }, |
| 335 |
{ name => 'mistral', type => 0, skipped_code => { -10 => 1 } }, |
| 336 |
{ name => 'autotests', type => 1, cb_prefix_output => 'prefix_autotest_output', message_multiple => 'autotests are ok', display_long => 1, skipped_code => { -10 => 1 } }, |
| 337 |
{ name => 'interfaces', type => 1, cb_prefix_output => 'prefix_interface_output', message_multiple => 'interfaces are ok', display_long => 1, skipped_code => { -10 => 1 } }, |
| 338 |
{ name => 'certificates', type => 1, cb_prefix_output => 'prefix_certificate_output', message_multiple => 'certificates are ok', display_long => 1, skipped_code => { -10 => 1 } }, |
| 339 |
{ name => 'ike_service', type => 0, skipped_code => { -10 => 1 } }, |
| 340 |
{ name => 'ike_sa', type => 1, cb_prefix_output => 'prefix_ike_sa_output', message_multiple => 'ike sa are ok', display_long => 1, skipped_code => { -10 => 1 } }, |
| 341 |
{ name => 'sa', type => 1, cb_prefix_output => 'prefix_sa_output', message_multiple => 'sa are ok', display_long => 1, skipped_code => { -10 => 1 } }, |
| 342 |
] |
| 343 |
} |
| 344 |
]; |
| 345 |
|
| 346 |
$self->{maps_counters}->{global} = [ |
| 347 |
{ label => 'devices-detected', display_ok => 0, nlabel => 'devices.detected.count', set => { |
| 348 |
key_values => [ { name => 'detected' } ], |
| 349 |
output_template => 'detected: %s', |
| 350 |
perfdatas => [ |
| 351 |
{ template => '%s', min => 0 } |
| 352 |
] |
| 353 |
} |
| 354 |
} |
| 355 |
]; |
| 356 |
|
| 357 |
$self->{maps_counters}->{connection} = [ |
| 358 |
{ |
| 359 |
label => 'connection-status', |
| 360 |
type => 2, |
| 361 |
unknown_default => '%{connectionStatus} =~ /unknown/i', |
| 362 |
warning_default => '%{connectionStatus} =~ /disconnected|unpaired/i', |
| 363 |
set => { |
| 364 |
key_values => [ { name => 'connectionStatus' }, { name => 'sn' } ], |
| 365 |
output_template => "connection status: %s", |
| 366 |
closure_custom_perfdata => sub { return 0; }, |
| 367 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 368 |
} |
| 369 |
}, |
| 370 |
{ label => 'connection-last-time', nlabel => 'device.connection.last.time', set => { |
| 371 |
key_values => [ { name => 'connection_seconds' }, { name => 'connection_human' }, { name => 'sn' } ], |
| 372 |
output_template => 'last connection: %s', |
| 373 |
output_use => 'connection_human', |
| 374 |
closure_custom_perfdata => $self->can('custom_connection_perfdata'), |
| 375 |
closure_custom_threshold_check => $self->can('custom_connection_threshold') |
| 376 |
} |
| 377 |
} |
| 378 |
]; |
| 379 |
|
| 380 |
$self->{maps_counters}->{mistral} = [ |
| 381 |
{ |
| 382 |
label => 'mistral-version', |
| 383 |
type => 2, |
| 384 |
set => { |
| 385 |
key_values => [ { name => 'firmwareCurrentVersion' }, { name => 'firmwareOtherVersion' }, { name => 'configurationId' } ], |
| 386 |
closure_custom_output => $self->can('custom_mistral_version_output'), |
| 387 |
closure_custom_perfdata => sub { return 0; }, |
| 388 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 389 |
} |
| 390 |
}, |
| 391 |
{ |
| 392 |
label => 'operating-state', |
| 393 |
type => 2, |
| 394 |
critical_default => '%{operatingState} !~ /operating/i', |
| 395 |
set => { |
| 396 |
key_values => [ { name => 'operatingState' }, { name => 'sn' } ], |
| 397 |
output_template => "operating state: %s", |
| 398 |
closure_custom_perfdata => sub { return 0; }, |
| 399 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 400 |
} |
| 401 |
}, |
| 402 |
{ label => 'temperature', nlabel => 'device.temperature.celsius', set => { |
| 403 |
key_values => [ { name => 'temperature' }, { name => 'sn' } ], |
| 404 |
output_template => 'temperature: %.2f C', |
| 405 |
closure_custom_perfdata => sub { |
| 406 |
my ($self, %options) = @_; |
| 407 |
|
| 408 |
$self->{output}->perfdata_add( |
| 409 |
nlabel => $self->{nlabel}, |
| 410 |
unit => 'C', |
| 411 |
instances => $self->{result_values}->{sn}, |
| 412 |
value => $self->{result_values}->{temperature}, |
| 413 |
warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), |
| 414 |
critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}) |
| 415 |
); |
| 416 |
} |
| 417 |
} |
| 418 |
} |
| 419 |
]; |
| 420 |
|
| 421 |
$self->{maps_counters}->{autotests} = [ |
| 422 |
{ |
| 423 |
label => 'autotest-state', |
| 424 |
type => 2, |
| 425 |
critical_default => '%{state} !~ /success/i', |
| 426 |
set => { |
| 427 |
key_values => [ { name => 'state' }, { name => 'name' }, { name => 'sn' } ], |
| 428 |
output_template => "state: %s", |
| 429 |
closure_custom_perfdata => sub { return 0; }, |
| 430 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 431 |
} |
| 432 |
} |
| 433 |
]; |
| 434 |
|
| 435 |
$self->{maps_counters}->{system} = [ |
| 436 |
{ |
| 437 |
label => 'system-version', |
| 438 |
type => 2, |
| 439 |
set => { |
| 440 |
key_values => [ { name => 'osName' }, { name => 'osRelease' } ], |
| 441 |
closure_custom_output => $self->can('custom_system_version_output'), |
| 442 |
closure_custom_perfdata => sub { return 0; }, |
| 443 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 444 |
} |
| 445 |
}, |
| 446 |
{ label => 'system-uptime', set => { |
| 447 |
key_values => [ { name => 'uptime' }, { name => 'sn' } ], |
| 448 |
closure_custom_output => $self->can('custom_uptime_output'), |
| 449 |
closure_custom_perfdata => $self->can('custom_uptime_perfdata'), |
| 450 |
closure_custom_threshold_check => $self->can('custom_uptime_threshold') |
| 451 |
} |
| 452 |
}, |
| 453 |
{ label => 'system-time-offset', nlabel => 'system.time.offset.seconds', set => { |
| 454 |
key_values => [ { name => 'offset' }, { name => 'date' }, { name => 'sn' } ], |
| 455 |
closure_custom_output => $self->can('custom_time_offset_output'), |
| 456 |
closure_custom_perfdata => sub { |
| 457 |
my ($self, %options) = @_; |
| 458 |
|
| 459 |
$self->{output}->perfdata_add( |
| 460 |
nlabel => $self->{nlabel}, |
| 461 |
unit => 's', |
| 462 |
instances => $self->{result_values}->{sn}, |
| 463 |
value => $self->{result_values}->{offset}, |
| 464 |
warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), |
| 465 |
critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}) |
| 466 |
); |
| 467 |
} |
| 468 |
} |
| 469 |
} |
| 470 |
]; |
| 471 |
|
| 472 |
$self->{maps_counters}->{interfaces} = [ |
| 473 |
{ |
| 474 |
label => 'interface-status', |
| 475 |
type => 2, |
| 476 |
warning_default => '%{operatingStatus} !~ /up/i', |
| 477 |
set => { |
| 478 |
key_values => [ { name => 'operatingStatus' }, { name => 'name' }, { name => 'sn' } ], |
| 479 |
output_template => "operating status: %s", |
| 480 |
closure_custom_perfdata => sub { return 0; }, |
| 481 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 482 |
} |
| 483 |
}, |
| 484 |
{ label => 'interface-traffic-in', nlabel => 'interface.traffic.in.bitspersecond', set => { |
| 485 |
key_values => [ { name => 'in', diff => 1 }, { name => 'speed_in' }, { name => 'name' }, { name => 'sn' } ], |
| 486 |
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'in' }, |
| 487 |
closure_custom_output => $self->can('custom_traffic_output'), |
| 488 |
closure_custom_perfdata => $self->can('custom_traffic_perfdata'), |
| 489 |
closure_custom_threshold_check => $self->can('custom_traffic_threshold') |
| 490 |
} |
| 491 |
}, |
| 492 |
{ label => 'interface-traffic-out', nlabel => 'interface.traffic.out.bitspersecond', set => { |
| 493 |
key_values => [ { name => 'out', diff => 1 }, { name => 'speed_out' }, { name => 'name' }, { name => 'sn' } ], |
| 494 |
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'out' }, |
| 495 |
closure_custom_output => $self->can('custom_traffic_output'), |
| 496 |
closure_custom_perfdata => $self->can('custom_traffic_perfdata'), |
| 497 |
closure_custom_threshold_check => $self->can('custom_traffic_threshold') |
| 498 |
} |
| 499 |
} |
| 500 |
]; |
| 501 |
|
| 502 |
$self->{maps_counters}->{certificates} = [ |
| 503 |
{ |
| 504 |
label => 'certificate-status', |
| 505 |
type => 2, |
| 506 |
set => { |
| 507 |
key_values => [ |
| 508 |
{ name => 'revoked' }, |
| 509 |
{ name => 'certSn' }, { name => 'subjectCommonName' }, { name => 'issuerCommonName' }, |
| 510 |
{ name => 'sn' } |
| 511 |
], |
| 512 |
closure_custom_output => $self->can('custom_certificate_status_output'), |
| 513 |
closure_custom_perfdata => sub { return 0; }, |
| 514 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 515 |
} |
| 516 |
}, |
| 517 |
{ label => 'certificate-expires', nlabel => 'certificate.expires', set => { |
| 518 |
key_values => [ |
| 519 |
{ name => 'expires_seconds' }, { name => 'expires_human' }, |
| 520 |
{ name => 'certSn' }, { name => 'subjectCommonName' }, { name => 'issuerCommonName' }, |
| 521 |
{ name => 'sn' } |
| 522 |
], |
| 523 |
output_template => 'expires in %s', |
| 524 |
output_use => 'expires_human', |
| 525 |
closure_custom_perfdata => $self->can('custom_certificate_expires_perfdata'), |
| 526 |
closure_custom_threshold_check => $self->can('custom_certificate_expires_threshold') |
| 527 |
} |
| 528 |
} |
| 529 |
]; |
| 530 |
|
| 531 |
$self->{maps_counters}->{ike_service} = [ |
| 532 |
{ |
| 533 |
label => 'vpn-ike-service-state', |
| 534 |
type => 2, |
| 535 |
critical_default => '%{state} =~ /stopped/i', |
| 536 |
set => { |
| 537 |
key_values => [ { name => 'state' }, { name => 'sn' } ], |
| 538 |
output_template => 'vpn ike service state: %s', |
| 539 |
closure_custom_perfdata => sub { return 0; }, |
| 540 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 541 |
} |
| 542 |
} |
| 543 |
]; |
| 544 |
|
| 545 |
$self->{maps_counters}->{ike_sa} = [ |
| 546 |
{ |
| 547 |
label => 'vpn-ike-sa-state', |
| 548 |
type => 2, |
| 549 |
critical_default => '%{state} =~ /down/i', |
| 550 |
set => { |
| 551 |
key_values => [ { name => 'state' }, { name => 'name' }, { name => 'sn' } ], |
| 552 |
output_template => 'vpn state: %s', |
| 553 |
closure_custom_perfdata => sub { return 0; }, |
| 554 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 555 |
} |
| 556 |
} |
| 557 |
]; |
| 558 |
|
| 559 |
$self->{maps_counters}->{sa} = [ |
| 560 |
{ |
| 561 |
label => 'vpn-sa-state', |
| 562 |
type => 2, |
| 563 |
critical_default => '%{state} =~ /down/i', |
| 564 |
set => { |
| 565 |
key_values => [ { name => 'state' }, { name => 'name' }, { name => 'sn' } ], |
| 566 |
output_template => 'state: %s', |
| 567 |
closure_custom_perfdata => sub { return 0; }, |
| 568 |
closure_custom_threshold_check => \&catalog_status_threshold_ng |
| 569 |
} |
| 570 |
}, |
| 571 |
{ label => 'vpn-sa-traffic', nlabel => 'vpn.sa.traffic.bitspersecond', set => { |
| 572 |
key_values => [ { name => 'traffic', per_second => 1 }, { name => 'name' }, { name => 'sn' } ], |
| 573 |
output_template => 'traffic: %s %s/s', |
| 574 |
output_change_bytes => 2, |
| 575 |
closure_custom_perfdata => sub { |
| 576 |
my ($self, %options) = @_; |
| 577 |
|
| 578 |
$self->{output}->perfdata_add( |
| 579 |
nlabel => $self->{nlabel}, |
| 580 |
unit => 'b/s', |
| 581 |
instances => [$self->{result_values}->{sn}, $self->{result_values}->{name}], |
| 582 |
value => $self->{result_values}->{traffic}, |
| 583 |
warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), |
| 584 |
critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}), |
| 585 |
min => 0 |
| 586 |
); |
| 587 |
} |
| 588 |
} |
| 589 |
} |
| 590 |
]; |
| 591 |
} |
| 592 |
|
| 593 |
sub new { |
| 594 |
my ($class, %options) = @_; |
| 595 |
my $self = $class->SUPER::new(package => __PACKAGE__, %options, statefile => 1, force_new_perfdata => 1); |
| 596 |
bless $self, $class; |
| 597 |
|
| 598 |
$options{options}->add_options(arguments => { |
| 599 |
'filter-id:s' => { name => 'filter_id' }, |
| 600 |
'filter-sn:s' => { name => 'filter_sn' }, |
| 601 |
'filter-cert-revoked' => { name => 'filter_cert_revoked' }, |
| 602 |
'add-interfaces' => { name => 'add_interfaces' }, |
| 603 |
'add-status' => { name => 'add_status' }, |
| 604 |
'add-system' => { name => 'add_system' }, |
| 605 |
'add-mistral' => { name => 'add_mistral' }, |
| 606 |
'add-certificates' => { name => 'add_certificates' }, |
| 607 |
'add-tunnels' => { name => 'add_tunnels' }, |
| 608 |
'time-connection-unit:s' => { name => 'time_connection_unit', default => 's' }, |
| 609 |
'time-uptime-unit:s' => { name => 'time_uptime_unit', default => 's' }, |
| 610 |
'time-certificate-unit:s' => { name => 'time_certificate_unit', default => 's' }, |
| 611 |
'traffic-unit:s' => { name => 'traffic_unit', default => 'percent_delta' }, |
| 612 |
'speed:s' => { name => 'speed' }, |
| 613 |
'ntp-hostname:s' => { name => 'ntp_hostname' }, |
| 614 |
'ntp-port:s' => { name => 'ntp_port', default => 123 } |
| 615 |
}); |
| 616 |
|
| 617 |
return $self; |
| 618 |
} |
| 619 |
|
| 620 |
sub check_options { |
| 621 |
my ($self, %options) = @_; |
| 622 |
$self->SUPER::check_options(%options); |
| 623 |
|
| 624 |
$self->{checking} = ''; |
| 625 |
my $selected = 0; |
| 626 |
foreach ('status', 'interfaces', 'tunnels', 'mistral', 'system', 'certificates') { |
| 627 |
if (defined($self->{option_results}->{'add_' . $_})) { |
| 628 |
$selected = 1; |
| 629 |
$self->{checking} .= $_; |
| 630 |
} |
| 631 |
} |
| 632 |
if ($selected == 0) { |
| 633 |
$self->{option_results}->{add_status} = 1; |
| 634 |
} |
| 635 |
|
| 636 |
if ($self->{option_results}->{time_connection_unit} eq '' || !defined($unitdiv->{$self->{option_results}->{time_connection_unit}})) { |
| 637 |
$self->{option_results}->{time_connection_unit} = 's'; |
| 638 |
} |
| 639 |
if ($self->{option_results}->{time_uptime_unit} eq '' || !defined($unitdiv->{$self->{option_results}->{time_uptime_unit}})) { |
| 640 |
$self->{option_results}->{time_uptime_unit} = 's'; |
| 641 |
} |
| 642 |
if ($self->{option_results}->{time_certificate_unit} eq '' || !defined($unitdiv->{$self->{option_results}->{time_certificate_unit}})) { |
| 643 |
$self->{option_results}->{time_certificate_unit} = 's'; |
| 644 |
} |
| 645 |
|
| 646 |
if (defined($self->{option_results}->{speed}) && $self->{option_results}->{speed} ne '') { |
| 647 |
if ($self->{option_results}->{speed} !~ /^[0-9]+(\.[0-9]+){0,1}$/) { |
| 648 |
$self->{output}->add_option_msg(short_msg => "Speed must be a positive number '" . $self->{option_results}->{speed} . "' (can be a float also)"); |
| 649 |
$self->{output}->option_exit(); |
| 650 |
} else { |
| 651 |
$self->{option_results}->{speed} *= 1000000; |
| 652 |
} |
| 653 |
} |
| 654 |
|
| 655 |
$self->{option_results}->{traffic_unit} = 'percent_delta' |
| 656 |
if (!defined($self->{option_results}->{traffic_unit}) || |
| 657 |
$self->{option_results}->{traffic_unit} eq '' || |
| 658 |
$self->{option_results}->{traffic_unit} eq '%'); |
| 659 |
if ($self->{option_results}->{traffic_unit} !~ /^(?:percent|percent_delta|bps|counter)$/) { |
| 660 |
$self->{output}->add_option_msg(short_msg => 'Wrong option --traffic-unit'); |
| 661 |
$self->{output}->option_exit(); |
| 662 |
} |
| 663 |
|
| 664 |
if (defined($self->{option_results}->{ntp_hostname}) && $self->{option_results}->{ntp_hostname} ne '') { |
| 665 |
centreon::plugins::misc::mymodule_load( |
| 666 |
output => $self->{output}, module => 'Net::NTP', |
| 667 |
error_msg => "Cannot load module 'Net::NTP'." |
| 668 |
); |
| 669 |
} |
| 670 |
} |
| 671 |
|
| 672 |
sub add_interfaces { |
| 673 |
my ($self, %options) = @_; |
| 674 |
|
| 675 |
$self->{devices}->{ $options{device}->{id} }->{interfaces} = {}; |
| 676 |
|
| 677 |
my $interfaces = $options{custom}->request_api(endpoint => '/ssIpsecGwHws/' . $options{device}->{id} . '/interfacesStatistics'); |
| 678 |
foreach my $interface (@{$interfaces->{listInterfaces}}) { |
| 679 |
$self->{devices}->{ $options{device}->{id} }->{interfaces}->{ $interface->{name} } = { |
| 680 |
name => $interface->{name}, |
| 681 |
sn => $options{device}->{serialNumber}, |
| 682 |
operatingStatus => $interface->{operatingStatus}, |
| 683 |
in => $interface->{interfaceStats}->{inOctets} * 8, |
| 684 |
out => $interface->{interfaceStats}->{outOctets} * 8, |
| 685 |
speed_in => defined($self->{option_results}->{speed}) && $self->{option_results}->{speed} ne '' ? $self->{option_results}->{speed} : $interface->{speed}, |
| 686 |
speed_out => defined($self->{option_results}->{speed}) && $self->{option_results}->{speed} ne '' ? $self->{option_results}->{speed} : $interface->{speed} |
| 687 |
}; |
| 688 |
} |
| 689 |
} |
| 690 |
|
| 691 |
sub add_system { |
| 692 |
my ($self, %options) = @_; |
| 693 |
|
| 694 |
my $system = $options{custom}->request_api(endpoint => '/ssIpsecGwHws/' . $options{device}->{id} . '/systemStateStatistics'); |
| 695 |
$self->{devices}->{ $options{device}->{id} }->{system} = { |
| 696 |
sn => $options{device}->{serialNumber}, |
| 697 |
osName => $system->{platform}->{osName}, |
| 698 |
osRelease => $system->{platform}->{osRelease} |
| 699 |
}; |
| 700 |
|
| 701 |
if ($system->{clock}->{bootDatetime} =~ /^\s*(\d{4})-(\d{2})-(\d{2})T(\d{2}):(\d{2}):(\d{2})\.\d+([+-].*)$/) { |
| 702 |
my $dt = DateTime->new( |
| 703 |
year => $1, |
| 704 |
month => $2, |
| 705 |
day => $3, |
| 706 |
hour => $4, |
| 707 |
minute => $5, |
| 708 |
second => $6, |
| 709 |
time_zone => $7 |
| 710 |
); |
| 711 |
$self->{devices}->{ $options{device}->{id} }->{system}->{uptime} = time() - $dt->epoch(); |
| 712 |
} |
| 713 |
|
| 714 |
if ($system->{clock}->{currentDatetime} =~ /^\s*(\d{4})-(\d{2})-(\d{2})T(\d{2}):(\d{2}):(\d{2})\.\d+([+-].*)$/) { |
| 715 |
my $ref_time; |
| 716 |
if (defined($self->{option_results}->{ntp_hostname}) && $self->{option_results}->{ntp_hostname} ne '') { |
| 717 |
my %ntp; |
| 718 |
|
| 719 |
eval { |
| 720 |
%ntp = Net::NTP::get_ntp_response($self->{option_results}->{ntp_hostname}, $self->{option_results}->{ntp_port}); |
| 721 |
}; |
| 722 |
if ($@) { |
| 723 |
$self->{output}->add_option_msg(short_msg => "Couldn't connect to ntp server: " . $@); |
| 724 |
$self->{output}->option_exit(); |
| 725 |
} |
| 726 |
|
| 727 |
$ref_time = $ntp{'Transmit Timestamp'}; |
| 728 |
} else { |
| 729 |
$ref_time = time(); |
| 730 |
} |
| 731 |
|
| 732 |
my $timezone = $7; |
| 733 |
my $dt = DateTime->new( |
| 734 |
year => $1, |
| 735 |
month => $2, |
| 736 |
day => $3, |
| 737 |
hour => $4, |
| 738 |
minute => $5, |
| 739 |
second => $6, |
| 740 |
time_zone => $timezone |
| 741 |
); |
| 742 |
my $remote_date_formated = sprintf( |
| 743 |
'local time: %02d-%02d-%02dT%02d:%02d:%02d (%s)', |
| 744 |
$dt->year, $dt->month, $dt->day, $dt->hour, $dt->minute, $dt->second, $timezone |
| 745 |
); |
| 746 |
|
| 747 |
my $offset = $dt->epoch() - $ref_time; |
| 748 |
|
| 749 |
$self->{devices}->{ $options{device}->{id} }->{system}->{offset} = sprintf('%d', $offset); |
| 750 |
$self->{devices}->{ $options{device}->{id} }->{system}->{date} = $remote_date_formated; |
| 751 |
} |
| 752 |
} |
| 753 |
|
| 754 |
sub add_mistral { |
| 755 |
my ($self, %options) = @_; |
| 756 |
|
| 757 |
my $mistral = $options{custom}->request_api(endpoint => '/ssIpsecGwHws/' . $options{device}->{id} . '/mistralStateStatistics'); |
| 758 |
$self->{devices}->{ $options{device}->{id} }->{mistral} = { |
| 759 |
sn => $options{device}->{serialNumber}, |
| 760 |
firmwareCurrentVersion => $mistral->{firmwareCurrent}->{version}, |
| 761 |
firmwareOtherVersion => $mistral->{firmwareOther}->{version}, |
| 762 |
configurationId => $mistral->{configurationId}, |
| 763 |
operatingState => lc($mistral->{operatingState}), |
| 764 |
temperature => $mistral->{temperature} |
| 765 |
}; |
| 766 |
|
| 767 |
$self->{devices}->{ $options{device}->{id} }->{autotests} = {}; |
| 768 |
foreach (@{$mistral->{autotestStates}}) { |
| 769 |
$self->{devices}->{ $options{device}->{id} }->{autotests}->{ name => $_->{name} } = { |
| 770 |
sn => $options{device}->{serialNumber}, |
| 771 |
name => $_->{name}, |
| 772 |
state => lc($_->{state}) |
| 773 |
}; |
| 774 |
} |
| 775 |
} |
| 776 |
|
| 777 |
sub add_certificates { |
| 778 |
my ($self, %options) = @_; |
| 779 |
|
| 780 |
$self->{devices}->{ $options{device}->{id} }->{certificates} = {}; |
| 781 |
foreach my $cert (@{$options{device}->{certificates}}) { |
| 782 |
if ($cert->{validityPeriodEnd} =~ /^\s*(\d{4})-(\d{2})-(\d{2})T(\d{2}):(\d{2}):(\d{2})\.\d+([+-].*)$/) { |
| 783 |
my $dt = DateTime->new( |
| 784 |
year => $1, |
| 785 |
month => $2, |
| 786 |
day => $3, |
| 787 |
hour => $4, |
| 788 |
minute => $5, |
| 789 |
second => $6, |
| 790 |
time_zone => $7 |
| 791 |
); |
| 792 |
|
| 793 |
my $revoked = $cert->{revoked} =~ /true|1/i ? 'yes' : 'no'; |
| 794 |
next if (defined($self->{option_results}->{filter_cert_revoked}) && $revoked eq 'yes'); |
| 795 |
|
| 796 |
$self->{devices}->{ $options{device}->{id} }->{certificates}->{ $cert->{gwCertificateName} } = { |
| 797 |
sn => $options{device}->{serialNumber}, |
| 798 |
certSn => $cert->{serialNumber}, |
| 799 |
subjectCommonName => $cert->{subjectCommonName}, |
| 800 |
issuerCommonName => defined($cert->{issuerCommonName}) ? $cert->{issuerCommonName} : '', |
| 801 |
usages => join(' ', @{$cert->{usages}}), |
| 802 |
revoked => $revoked, |
| 803 |
expires_seconds => $dt->epoch() - time() |
| 804 |
}; |
| 805 |
$self->{devices}->{ $options{device}->{id} }->{certificates}->{ $cert->{gwCertificateName} }->{expires_seconds} = 0 |
| 806 |
if ($self->{devices}->{ $options{device}->{id} }->{certificates}->{ $cert->{gwCertificateName} }->{expires_seconds} < 0); |
| 807 |
$self->{devices}->{ $options{device}->{id} }->{certificates}->{ $cert->{gwCertificateName} }->{expires_human} = centreon::plugins::misc::change_seconds( |
| 808 |
value => $self->{devices}->{ $options{device}->{id} }->{certificates}->{ $cert->{gwCertificateName} }->{expires_seconds} |
| 809 |
); |
| 810 |
} |
| 811 |
} |
| 812 |
} |
| 813 |
|
| 814 |
sub add_tunnels { |
| 815 |
my ($self, %options) = @_; |
| 816 |
|
| 817 |
my $tunnels = $options{custom}->request_api(endpoint => '/ssIpsecGwHws/' . $options{device}->{id} . '/vpnStatistics'); |
| 818 |
$self->{devices}->{ $options{device}->{id} }->{ike_service} = { |
| 819 |
sn => $options{device}->{serialNumber}, |
| 820 |
state => lc($tunnels->{ikev2State}->{serviceState}) |
| 821 |
}; |
| 822 |
|
| 823 |
$self->{devices}->{ $options{device}->{id} }->{ike_sa} = {}; |
| 824 |
foreach (@{$tunnels->{ikev2State}->{ikeSaState}}) { |
| 825 |
$self->{devices}->{ $options{device}->{id} }->{ike_sa}->{ $_->{name} } = { |
| 826 |
sn => $options{device}->{serialNumber}, |
| 827 |
name => $_->{name}, |
| 828 |
state => lc($_->{saState}) |
| 829 |
}; |
| 830 |
} |
| 831 |
|
| 832 |
$self->{devices}->{ $options{device}->{id} }->{sa} = {}; |
| 833 |
foreach my $sa (@{$tunnels->{sadState}->{listSaName}}) { |
| 834 |
foreach my $saState (@{$sa->{listSaState}}) { |
| 835 |
my $name = $sa->{name}; |
| 836 |
|
| 837 |
foreach my $spd (@{$tunnels->{spdState}->{listSpState}}) { |
| 838 |
if ($saState->{spi} eq $spd->{spi}) { |
| 839 |
$name .= '.' . lc($spd->{direction}) . '(src:' . $spd->{sourceTs}->{ipAddress} . ',dst:' . $spd->{destinationTs}->{ipAddress} . ')'; |
| 840 |
last; |
| 841 |
} |
| 842 |
} |
| 843 |
|
| 844 |
$self->{devices}->{ $options{device}->{id} }->{sa}->{$name} = { |
| 845 |
sn => $options{device}->{serialNumber}, |
| 846 |
name => $name, |
| 847 |
state => lc($saState->{state}), |
| 848 |
traffic => $saState->{lifetime}->{byteCurrent} * 1000 |
| 849 |
}; |
| 850 |
} |
| 851 |
} |
| 852 |
} |
| 853 |
|
| 854 |
sub manage_selection { |
| 855 |
my ($self, %options) = @_; |
| 856 |
|
| 857 |
my $inventory = $options{custom}->get_gateway_inventory(); |
| 858 |
|
| 859 |
$self->{global} = { detected => 0 }; |
| 860 |
$self->{devices} = {}; |
| 861 |
foreach my $device (@$inventory) { |
| 862 |
next if (defined($self->{option_results}->{filter_id}) && $self->{option_results}->{filter_id} ne '' && |
| 863 |
$device->{id} !~ /$self->{option_results}->{filter_id}/); |
| 864 |
next if (defined($self->{option_results}->{filter_sn}) && $self->{option_results}->{filter_sn} ne '' && |
| 865 |
$device->{serialNumber} !~ /$self->{option_results}->{filter_sn}/); |
| 866 |
|
| 867 |
$self->{global}->{detected}++; |
| 868 |
|
| 869 |
$self->{devices}->{ $device->{id} } = { |
| 870 |
sn => $device->{serialNumber}, |
| 871 |
name => defined($device->{name}) ? $device->{name} : '' |
| 872 |
}; |
| 873 |
if (defined($self->{option_results}->{add_status})) { |
| 874 |
$self->{devices}->{ $device->{id} }->{connection} = { |
| 875 |
sn => $device->{serialNumber}, |
| 876 |
connectionStatus => defined($device->{status}) ? lc($device->{status}->{connectedStatus}) : 'unpaired' |
| 877 |
}; |
| 878 |
if (defined($device->{status})) { |
| 879 |
$self->{devices}->{ $device->{id} }->{connection}->{connection_seconds} = time() - ($device->{status}->{statusEpochMilli} / 1000); |
| 880 |
$self->{devices}->{ $device->{id} }->{connection}->{connection_human} = centreon::plugins::misc::change_seconds( |
| 881 |
value => $self->{devices}->{ $device->{id} }->{connection}->{connection_seconds} |
| 882 |
); |
| 883 |
} |
| 884 |
} |
| 885 |
|
| 886 |
$self->add_interfaces(custom => $options{custom}, device => $device) |
| 887 |
if (defined($self->{option_results}->{add_interfaces})); |
| 888 |
|
| 889 |
$self->add_system(custom => $options{custom}, device => $device) |
| 890 |
if (defined($self->{option_results}->{add_system})); |
| 891 |
|
| 892 |
$self->add_mistral(custom => $options{custom}, device => $device) |
| 893 |
if (defined($self->{option_results}->{add_mistral})); |
| 894 |
|
| 895 |
$self->add_certificates(custom => $options{custom}, device => $device) |
| 896 |
if (defined($self->{option_results}->{add_certificates})); |
| 897 |
|
| 898 |
$self->add_tunnels(custom => $options{custom}, device => $device) |
| 899 |
if (defined($self->{option_results}->{add_tunnels})); |
| 900 |
} |
| 901 |
|
| 902 |
$self->{cache_name} = 'thales_mistral_' . $options{custom}->get_connection_info() . '_' . $self->{mode} . '_' . |
| 903 |
Digest::MD5::md5_hex( |
| 904 |
(defined($self->{option_results}->{filter_counters}) ? $self->{option_results}->{filter_counters} : '') . '_' . |
| 905 |
(defined($self->{option_results}->{filter_id}) ? $self->{option_results}->{filter_id} : '') . '_' . |
| 906 |
(defined($self->{option_results}->{filter_sn}) ? $self->{option_results}->{filter_sn} : '') . '_' . |
| 907 |
$self->{checking} |
| 908 |
); |
| 909 |
} |
| 910 |
|
| 911 |
1; |
| 912 |
|
| 913 |
__END__ |
| 914 |
|
| 915 |
=head1 MODE |
| 916 |
|
| 917 |
Check devices. |
| 918 |
|
| 919 |
=over 8 |
| 920 |
|
| 921 |
=item B<--filter-id> |
| 922 |
|
| 923 |
Filter devices by id. |
| 924 |
|
| 925 |
=item B<--filter-sn> |
| 926 |
|
| 927 |
Filter devices by serial number. |
| 928 |
|
| 929 |
=item B<--filter-cert-revoked> |
| 930 |
|
| 931 |
Skip revoked certificates. |
| 932 |
|
| 933 |
=item B<--add-status> |
| 934 |
|
| 935 |
Check connection status. |
| 936 |
|
| 937 |
=item B<--add-interfaces> |
| 938 |
|
| 939 |
Check interfaces. |
| 940 |
|
| 941 |
=item B<--add-system> |
| 942 |
|
| 943 |
Check system. |
| 944 |
|
| 945 |
=item B<--add-mistral> |
| 946 |
|
| 947 |
Check mistral (operating status, temperature, autotests). |
| 948 |
|
| 949 |
=item B<--add-certificates> |
| 950 |
|
| 951 |
Check certificates. |
| 952 |
|
| 953 |
=item B<--add-tunnels> |
| 954 |
|
| 955 |
Check tunnels. |
| 956 |
|
| 957 |
=item B<--unknown-certificate-status> |
| 958 |
|
| 959 |
Define the conditions to match for the status to be UNKNOWN. |
| 960 |
You can use the following variables: %{revoked}, %{sn}, %{certSn}, %{subjectCommonName}, %{issuerCommonName} |
| 961 |
|
| 962 |
=item B<--warning-certificate-status> |
| 963 |
|
| 964 |
Define the conditions to match for the status to be WARNING. |
| 965 |
You can use the following variables: %{revoked}, %{sn}, %{certSn}, %{subjectCommonName}, %{issuerCommonName} |
| 966 |
|
| 967 |
=item B<--critical-certificate-status> |
| 968 |
|
| 969 |
Define the conditions to match for the status to be CRITICAL. |
| 970 |
You can use the following variables: %{revoked}, %{sn}, %{certSn}, %{subjectCommonName}, %{issuerCommonName} |
| 971 |
|
| 972 |
=item B<--unknown-connection-status> |
| 973 |
|
| 974 |
Define the conditions to match for the status to be UNKNOWN (default: '%{connectionStatus} =~ /unknown/i'). |
| 975 |
You can use the following variables: %{sn}, %{connectionStatus} |
| 976 |
|
| 977 |
=item B<--warning-connection-status> |
| 978 |
|
| 979 |
Define the conditions to match for the status to be WARNING (default: '%{connectionStatus} =~ /disconnected|unpaired/i'). |
| 980 |
You can use the following variables: %{sn}, %{connectionStatus} |
| 981 |
|
| 982 |
=item B<--critical-connection-status> |
| 983 |
|
| 984 |
Define the conditions to match for the status to be CRITICAL. |
| 985 |
You can use the following variables: %{sn}, %{connectionStatus} |
| 986 |
|
| 987 |
=item B<--unknown-operating-state> |
| 988 |
|
| 989 |
Define the conditions to match for the status to be UNKNOWN. |
| 990 |
You can use the following variables: %{sn}, %{operatingState} |
| 991 |
|
| 992 |
=item B<--warning-operating-state> |
| 993 |
|
| 994 |
Define the conditions to match for the status to be WARNING. |
| 995 |
You can use the following variables: %{sn}, %{operatingState} |
| 996 |
|
| 997 |
=item B<--critical-operating-state> |
| 998 |
|
| 999 |
Define the conditions to match for the status to be CRITICAL (default: '%{operatingState} !~ /operating/i'). |
| 1000 |
You can use the following variables: %{sn}, %{operatingState} |
| 1001 |
|
| 1002 |
=item B<--unknown-autotest-state> |
| 1003 |
|
| 1004 |
Define the conditions to match for the status to be UNKNOWN. |
| 1005 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1006 |
|
| 1007 |
=item B<--warning-autotest-state> |
| 1008 |
|
| 1009 |
Define the conditions to match for the status to be WARNING. |
| 1010 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1011 |
|
| 1012 |
=item B<--critical-autotest-state> |
| 1013 |
|
| 1014 |
Define the conditions to match for the status to be CRITICAL (default: '%{state} !~ /success/i'). |
| 1015 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1016 |
|
| 1017 |
=item B<--unknown-interface-status> |
| 1018 |
|
| 1019 |
Define the conditions to match for the status to be UNKNOWN. |
| 1020 |
You can use the following variables: %{sn}, %{name}, %{operatingStatus} |
| 1021 |
|
| 1022 |
=item B<--warning-interface-status> |
| 1023 |
|
| 1024 |
Define the conditions to match for the status to be WARNING. |
| 1025 |
You can use the following variables: %{sn}, %{name}, %{operatingStatus} |
| 1026 |
|
| 1027 |
=item B<--critical-interface-status> |
| 1028 |
|
| 1029 |
Define the conditions to match for the status to be CRITICAL (default: '%{operatingStatus} !~ /up/i'). |
| 1030 |
You can use the following variables: %{sn}, %{name}, %{operatingStatus} |
| 1031 |
|
| 1032 |
=item B<--unknown-vpn-ike-service-state> |
| 1033 |
|
| 1034 |
Define the conditions to match for the status to be UNKNOWN. |
| 1035 |
You can use the following variables: %{sn}, %{state} |
| 1036 |
|
| 1037 |
=item B<--warning-vpn-ike-service-state> |
| 1038 |
|
| 1039 |
Define the conditions to match for the status to be WARNING. |
| 1040 |
You can use the following variables: %{sn}, %{state} |
| 1041 |
|
| 1042 |
=item B<--critical-vpn-ike-service-state> |
| 1043 |
|
| 1044 |
Define the conditions to match for the status to be CRITICAL (default: '%{state} =~ /stopped/i'). |
| 1045 |
You can use the following variables: %{sn}, %{state} |
| 1046 |
|
| 1047 |
=item B<--unknown-vpn-ike-sa-state> |
| 1048 |
|
| 1049 |
Define the conditions to match for the status to be UNKNOWN. |
| 1050 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1051 |
|
| 1052 |
=item B<--warning-vpn-ike-sa-state> |
| 1053 |
|
| 1054 |
Define the conditions to match for the status to be WARNING. |
| 1055 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1056 |
|
| 1057 |
=item B<--critical-vpn-ike-sa-state> |
| 1058 |
|
| 1059 |
Define the conditions to match for the status to be CRITICAL (default: '%{state} =~ /down/i'). |
| 1060 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1061 |
|
| 1062 |
=item B<--unknown-vpn-sa-state> |
| 1063 |
|
| 1064 |
Define the conditions to match for the status to be UNKNOWN. |
| 1065 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1066 |
|
| 1067 |
=item B<--warning-vpn-sa-state> |
| 1068 |
|
| 1069 |
Define the conditions to match for the status to be WARNING. |
| 1070 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1071 |
|
| 1072 |
=item B<--critical-vpn-sa-state> |
| 1073 |
|
| 1074 |
Define the conditions to match for the status to be CRITICAL (default: '%{state} =~ /down/i'). |
| 1075 |
You can use the following variables: %{sn}, %{name}, %{state} |
| 1076 |
|
| 1077 |
=item B<--ntp-hostname> |
| 1078 |
|
| 1079 |
Set the ntp hostname (if not set, localtime is used). |
| 1080 |
|
| 1081 |
=item B<--ntp-port> |
| 1082 |
|
| 1083 |
Set the ntp port (default: 123). |
| 1084 |
|
| 1085 |
=item B<--time-connection-unit> |
| 1086 |
|
| 1087 |
Select the time unit for connection threshold. May be 's' for seconds, 'm' for minutes, |
| 1088 |
'h' for hours, 'd' for days, 'w' for weeks. Default is seconds. |
| 1089 |
|
| 1090 |
=item B<--time-uptime-unit> |
| 1091 |
|
| 1092 |
Select the time unit for uptime threshold. May be 's' for seconds, 'm' for minutes, |
| 1093 |
'h' for hours, 'd' for days, 'w' for weeks. Default is seconds. |
| 1094 |
|
| 1095 |
=item B<--time-certificate-unit> |
| 1096 |
|
| 1097 |
Select the time unit for certificate threshold. May be 's' for seconds, 'm' for minutes, |
| 1098 |
'h' for hours, 'd' for days, 'w' for weeks. Default is seconds. |
| 1099 |
|
| 1100 |
=item B<--traffic-unit> |
| 1101 |
|
| 1102 |
Units of thresholds for the traffic (default: 'percent_delta') ('percent_delta', 'bps', 'counter'). |
| 1103 |
|
| 1104 |
=item B<--speed> |
| 1105 |
|
| 1106 |
Set interface speed (in Mb). |
| 1107 |
|
| 1108 |
=item B<--warning-*> B<--critical-*> |
| 1109 |
|
| 1110 |
Thresholds. |
| 1111 |
Can be: 'devices-detected', 'connection-last-time', |
| 1112 |
'interface-traffic-in', 'interface-traffic-out', |
| 1113 |
'system-uptime', 'system-time-offset', temperature', |
| 1114 |
'certificate-expires', 'vpn-sa-traffic'. |
| 1115 |
|
| 1116 |
=back |
| 1117 |
|
| 1118 |
=cut |