Debian Codegraph @

translations/manual/ms/regexp_quick_reference.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
5 #
6 # Translators:
7 # abuyop <[email protected]>, 2018
8 #
9 #, fuzzy
10 msgid ""
11 msgstr ""
12 "Project-Id-Version: calibre 4.99.13\n"
13 "Report-Msgid-Bugs-To: \n"
14 "POT-Creation-Date: 2020-09-02 05:23+0000\n"
15 "PO-Revision-Date: 2017-12-15 03:02+0000\n"
16 "Last-Translator: abuyop <[email protected]>, 2018\n"
17 "Language-Team: Malay (https://www.transifex.com/calibre/teams/19337/ms/)\n"
18 "MIME-Version: 1.0\n"
19 "Content-Type: text/plain; charset=UTF-8\n"
20 "Content-Transfer-Encoding: 8bit\n"
21 "Language: ms\n"
22 "Plural-Forms: nplurals=1; plural=0;\n"
23
24 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:2
25 msgid "Quick reference for regexp syntax"
26 msgstr ""
27
28 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:4
29 msgid ""
30 "This checklist summarizes the most commonly used/hard to remember parts of "
31 "the regexp engine available in most parts of calibre."
32 msgstr ""
33
34 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:10
35 msgid "Contents"
36 msgstr "Kandungan"
37
38 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:13
39 msgid "Character classes"
40 msgstr ""
41
42 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:15
43 msgid ""
44 "Character classes are useful to represent different groups of characters, "
45 "succinctly."
46 msgstr ""
47
48 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:18
49 msgid "Examples:"
50 msgstr ""
51
52 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:21
53 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:52
54 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:253
55 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:283
56 msgid "**Representation**"
57 msgstr ""
58
59 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:21
60 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:52
61 msgid "**Class**"
62 msgstr ""
63
64 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:24
65 msgid "``[a-z]``"
66 msgstr ""
67
68 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:24
69 msgid ""
70 "Lowercase letters. Does not include characters with accent mark and "
71 "ligatures"
72 msgstr ""
73
74 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:27
75 msgid "``[a-z0-9]``"
76 msgstr ""
77
78 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:27
79 msgid "Lowercase letters from a to z or numbers from 0 to 9"
80 msgstr ""
81
82 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:30
83 msgid "``[A-Za-z-]``"
84 msgstr ""
85
86 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:30
87 msgid ""
88 "Uppercase or lowercase letters, or a dash. To include the dash in a class, "
89 "you must put it at the beginning or at the end so as not to confuse it with "
90 "the hyphen that specifies a range of characters"
91 msgstr ""
92
93 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:33
94 msgid "``[^0-9]``"
95 msgstr ""
96
97 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:33
98 msgid ""
99 "Any character except a digit. The caret (^) placed at the beginning of the "
100 "class excludes the characters of the class (complemented class)"
101 msgstr ""
102
103 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:36
104 msgid "``[[a-z]--[aeiouy]]``"
105 msgstr ""
106
107 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:36
108 msgid ""
109 "The lowercase consonants. A class can be included in a class. The characters"
110 " ``--`` exclude what follows them"
111 msgstr ""
112
113 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:39
114 msgid "``[\\w--[\\d_]]``"
115 msgstr ""
116
117 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:39
118 msgid ""
119 "All letters (including foreign accented characters). Abbreviated classes can"
120 " be used inside a class"
121 msgstr ""
122
123 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:44
124 msgid "Example::"
125 msgstr ""
126
127 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:49
128 msgid "Shorthand character classes"
129 msgstr ""
130
131 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:55
132 msgid "``\\d``"
133 msgstr ""
134
135 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:55
136 msgid "A digit (same as ``[0-9]``)"
137 msgstr ""
138
139 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:58
140 msgid "``\\D``"
141 msgstr ""
142
143 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:58
144 msgid "Any non-numeric character (same as ``[^0-9]``)"
145 msgstr ""
146
147 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:61
148 msgid "``\\w``"
149 msgstr ""
150
151 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:61
152 msgid ""
153 "An alphanumeric character (``[a-zA-Z0-9]``) including characters with accent"
154 " mark and ligatures"
155 msgstr ""
156
157 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:64
158 msgid "``\\W``"
159 msgstr ""
160
161 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:64
162 msgid "Any “non-word” character"
163 msgstr ""
164
165 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:67
166 msgid "``\\s``"
167 msgstr ""
168
169 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:67
170 msgid "Space, non-breaking space, tab, return line"
171 msgstr ""
172
173 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:70
174 msgid "``\\S``"
175 msgstr ""
176
177 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:70
178 msgid "Any “non-whitespace” character"
179 msgstr ""
180
181 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:73
182 msgid "``.``"
183 msgstr ""
184
185 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:73
186 msgid ""
187 "Any character except newline. Use the “dot all” checkbox or the ``(?s)`` "
188 "regexp modifier to include the newline character."
189 msgstr ""
190
191 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:78
192 msgid "The quantifiers"
193 msgstr ""
194
195 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:81
196 msgid "**Quantifier**"
197 msgstr ""
198
199 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:81
200 msgid "**Number of occurrences of the expression preceding the quantifier**"
201 msgstr ""
202
203 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:84
204 msgid "``?``"
205 msgstr ""
206
207 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:84
208 msgid "0 or 1 occurrence of the expression. Same as ``{0,1}``"
209 msgstr ""
210
211 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:87
212 msgid "``+``"
213 msgstr ""
214
215 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:87
216 msgid "1 or more occurrences of the expression. Same as ``{1,}``"
217 msgstr ""
218
219 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:90
220 msgid "``*``"
221 msgstr ""
222
223 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:90
224 msgid "0, 1 or more occurrences of the expression. Same as ``{0,}``"
225 msgstr ""
226
227 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:93
228 msgid "``{n}``"
229 msgstr ""
230
231 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:93
232 msgid "Exactly n occurrences of the expression"
233 msgstr ""
234
235 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:96
236 msgid "``{min,max}``"
237 msgstr ""
238
239 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:96
240 msgid "Number of occurrences between the minimum and maximum values included"
241 msgstr ""
242
243 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:99
244 msgid "``{min,}``"
245 msgstr ""
246
247 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:99
248 msgid ""
249 "Number of occurrences between the minimum value included and the infinite"
250 msgstr ""
251
252 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:102
253 msgid "``{,max}``"
254 msgstr ""
255
256 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:102
257 msgid "Number of occurrences between 0 and the maximum value included"
258 msgstr ""
259
260 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:109
261 msgid "Greed"
262 msgstr ""
263
264 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:111
265 msgid ""
266 "By default, with quantifiers, the regular expression engine is greedy: it "
267 "extends the selection as much as possible. This often causes surprises, at "
268 "first. ``?`` follows a quantifier to make it lazy. Avoid putting two in the "
269 "same expression, the result can be unpredictable."
270 msgstr ""
271
272 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:116
273 msgid ""
274 "Beware of nesting quantifiers, for example, the pattern ``(a*)*``, as it "
275 "exponentially increases processing time."
276 msgstr ""
277
278 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:120
279 msgid "Alternation"
280 msgstr ""
281
282 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:122
283 msgid ""
284 "The ``|`` character in a regular expression is a logical ``OR``. It means "
285 "that either the preceding or the following expression can match."
286 msgstr ""
287
288 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:126
289 msgid "Exclusion"
290 msgstr ""
291
292 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:128
293 msgid "Method 1"
294 msgstr ""
295
296 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:130
297 msgid "``pattern_to_exclude(*SKIP)(*FAIL)|pattern_to_select``"
298 msgstr ""
299
300 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:132
301 msgid "Example:"
302 msgstr ""
303
304 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:134
305 msgid "``\"Blabla\"(*SKIP)(*FAIL)|Blabla``"
306 msgstr ""
307
308 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:136
309 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:144
310 msgid ""
311 "selects Blabla, in the strings Blabla or \"Blabla or Blabla\", but not in "
312 "\"Blabla\"."
313 msgstr ""
314
315 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:138
316 msgid "Method 2"
317 msgstr ""
318
319 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:140
320 msgid "``pattern_to_exclude\\K|(pattern_to_select)``"
321 msgstr ""
322
323 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:142
324 msgid "``\"Blabla\"\\K|(Blabla)``"
325 msgstr ""
326
327 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:147
328 msgid "Anchors"
329 msgstr ""
330
331 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:149
332 msgid ""
333 "An anchor is a way to match a logical location in a string, rather than a "
334 "character. The most useful anchors for text processing are:"
335 msgstr ""
336
337 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:155
338 msgid "``\\b``"
339 msgstr ""
340
341 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:153
342 msgid ""
343 "Designates a word boundary, i.e. a transition from space to non-space "
344 "character. For example, you can use ``\\bsurd`` to match ``the surd`` but "
345 "not ``absurd``."
346 msgstr ""
347
348 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:159
349 msgid "``^``"
350 msgstr ""
351
352 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:158
353 msgid "Matches the start of a line (in multi-line mode, which is the default)"
354 msgstr ""
355
356 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:162
357 msgid "``$``"
358 msgstr ""
359
360 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:162
361 msgid "Matches the end of a line (in multi-line mode, which is the default)"
362 msgstr ""
363
364 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:169
365 msgid "``\\K``"
366 msgstr ""
367
368 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:165
369 msgid ""
370 "Resets the start position of the selection to its position in the pattern. "
371 "Some regexp engines (but not calibre) do not allow lookbehind of variable "
372 "length, especially with quantifiers. When you can use ``\\K`` with these "
373 "engines, it also allows you to get rid of this limit by writing the "
374 "equivalent of a positive lookbehind of variable length."
375 msgstr ""
376
377 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:172
378 msgid "Groups"
379 msgstr ""
380
381 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:177
382 msgid "``(expression)``"
383 msgstr ""
384
385 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:175
386 msgid ""
387 "Capturing group, which stores the selection and can be recalled later in the"
388 " *search* or *replace* patterns with ``\\n``, where ``n`` is the sequence "
389 "number of the capturing group (starting at 1 in reading order)"
390 msgstr ""
391
392 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:180
393 msgid "``(?:expression)``"
394 msgstr ""
395
396 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:180
397 msgid "Group that does not capture the selection"
398 msgstr ""
399
400 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:186
401 msgid "``(?>expression)``"
402 msgstr ""
403
404 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:183
405 msgid ""
406 "Atomic Group: As soon as the expression is satisfied, the regexp engine "
407 "passes, and if the rest of the pattern fails, it will not backtrack to try "
408 "other combinations with the expression. Atomic groups do not capture."
409 msgstr ""
410
411 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:190
412 msgid "``(?|expression)``"
413 msgstr ""
414
415 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:189
416 msgid ""
417 "Branch reset group: the branches of the alternations included in the "
418 "expression share the same group numbers"
419 msgstr ""
420
421 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:196
422 msgid "``(?<name>expression)``"
423 msgstr ""
424
425 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:193
426 msgid ""
427 "Group named “name”. The selection can be recalled later in the *search* "
428 "pattern by ``(?P=name)`` and in the *replace* by ``\\g<name>``. Two "
429 "different groups can use the same name."
430 msgstr ""
431
432 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:199
433 msgid "Lookarounds"
434 msgstr ""
435
436 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:202
437 msgid "**Lookaround**"
438 msgstr ""
439
440 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:202
441 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:253
442 msgid "**Meaning**"
443 msgstr ""
444
445 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:205
446 msgid "``?=``"
447 msgstr ""
448
449 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:205
450 msgid "Positive lookahead (to be placed after the selection)"
451 msgstr ""
452
453 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:208
454 msgid "``?!``"
455 msgstr ""
456
457 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:208
458 msgid "Negative lookahead (to be placed after the selection)"
459 msgstr ""
460
461 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:211
462 msgid "``?<=``"
463 msgstr ""
464
465 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:211
466 msgid "Positive lookbehind (to be placed before the selection)"
467 msgstr ""
468
469 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:214
470 msgid "``?<!``"
471 msgstr ""
472
473 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:214
474 msgid "Negative lookbehind (to be placed before the selection)"
475 msgstr ""
476
477 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:218
478 msgid ""
479 "Lookaheads and lookbehinds do not consume characters, they are zero length "
480 "and do not capture. They are atomic groups: as soon as the assertion is "
481 "satisfied, the regexp engine passes, and if the rest of the pattern fails, "
482 "it will not backtrack inside the lookaround to try other combinations."
483 msgstr ""
484
485 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:223
486 msgid ""
487 "When looking for multiple matches in a string, at the starting position of "
488 "each match attempt, a lookbehind can inspect the characters before the "
489 "current position. Therefore, on the string 123, the pattern ``(?<=\\d)\\d`` "
490 "(a digit preceded by a digit) should, in theory, select 2 and 3. On the "
491 "other hand, ``\\d\\K\\d`` can only select 2, because the starting position "
492 "after the first selection is immediately before 3, and there are not enough "
493 "digits for a second match. Similarly, ``\\d(\\d)`` only captures 2. In "
494 "calibre's regexp engine practice, the positive lookbehind behaves in the "
495 "same way, and selects only 2, contrary to theory."
496 msgstr ""
497
498 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:233
499 msgid ""
500 "Groups can be placed inside lookarounds, but capture is rarely useful. "
501 "Nevertheless, if it is useful, it will be necessary to be very careful in "
502 "the use of a quantifier in a lookbehind: the greed associated with the "
503 "absence of backtracking can give a surprising capture. For this reason, use "
504 "``\\K`` rather than a positive lookbehind when you have a quantifier (or "
505 "worse, several) in a capturing group of the positive lookbehind."
506 msgstr ""
507
508 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:240
509 msgid "Example of negative lookahead:"
510 msgstr ""
511
512 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:242
513 msgid "``(?![^<>{}]*[>}])``"
514 msgstr ""
515
516 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:244
517 msgid ""
518 "Placed at the end of the pattern prevents to select within a tag or a style "
519 "embedded in the file."
520 msgstr ""
521
522 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:246
523 msgid ""
524 "Whenever possible, it is always better to \"anchor\" the lookarounds, to "
525 "reduce the number of steps necessary to obtain the result."
526 msgstr ""
527
528 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:250
529 msgid "Recursion"
530 msgstr ""
531
532 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:256
533 msgid "``(?R)``"
534 msgstr ""
535
536 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:256
537 msgid "Recursion of the entire pattern"
538 msgstr ""
539
540 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:259
541 msgid "``(?1)``"
542 msgstr ""
543
544 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:259
545 msgid ""
546 "Recursion of the only pattern of the numbered capturing group, here group 1"
547 msgstr ""
548
549 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:263
550 msgid ""
551 "Recursion is calling oneself. This is useful for balanced queries, such as "
552 "quoted strings, which can contain embedded quoted strings. Thus, if during "
553 "the processing of a string between double quotation marks, we encounter the "
554 "beginning of a new string between double quotation marks, well we know how "
555 "to do, and we call ourselves. Then we have a pattern like::"
556 msgstr ""
557
558 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:271
559 msgid ""
560 "To select a string between double quotation marks without stopping on an "
561 "embedded string::"
562 msgstr ""
563
564 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:275
565 msgid ""
566 "This template can also be used to modify pairs of tags that can be embedded,"
567 " such as ``<div>`` tags."
568 msgstr ""
569
570 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:280
571 msgid "Special characters"
572 msgstr ""
573
574 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:283
575 msgid "**Character**"
576 msgstr ""
577
578 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:286
579 msgid "``\\t``"
580 msgstr ""
581
582 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:286
583 msgid "tabulation"
584 msgstr ""
585
586 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:289
587 msgid "``\\n``"
588 msgstr ""
589
590 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:289
591 msgid "line break"
592 msgstr ""
593
594 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:292
595 msgid "``\\x20``"
596 msgstr ""
597
598 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:292
599 msgid "(breakable) space"
600 msgstr ""
601
602 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:295
603 msgid "``\\xa0``"
604 msgstr ""
605
606 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:295
607 msgid "no-break space"
608 msgstr ""
609
610 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:300
611 msgid "Meta-characters"
612 msgstr ""
613
614 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:302
615 msgid ""
616 "Meta-characters are those that have a special meaning for the regexp engine."
617 " Of these, twelve must be preceded by an escape character, the backslash "
618 "(``\\``), to lose their special meaning and become a regular character "
619 "again::"
620 msgstr ""
621
622 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:308
623 msgid ""
624 "Seven other meta-characters do not need to be preceded by a backslash (but "
625 "can be without any other consequence)::"
626 msgstr ""
627
628 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:314
629 msgid ""
630 "Special characters lose their status if they are used inside a class "
631 "(between brackets ``[]``). The closing bracket and the dash have a special "
632 "status in a class. Outside the class, the dash is a simple literal, the "
633 "closing bracket remains a meta-character."
634 msgstr ""
635
636 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:319
637 msgid ""
638 "The slash (/) and the number sign (or hash character) (#) are not meta-"
639 "characters, they don’t need to be escaped."
640 msgstr ""
641
642 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:322
643 msgid ""
644 "In some tools, like regex101.com with the Python engine, double quotes have "
645 "the special status of separator, and must be escaped, or the options "
646 "changed. This is not the case in the editor of calibre."
647 msgstr ""
648
649 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:327
650 msgid "Modes"
651 msgstr ""
652
653 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:330
654 msgid "``(?s)``"
655 msgstr ""
656
657 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:330
658 msgid "Causes the dot (``.``) to match newline characters as well"
659 msgstr ""
660
661 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:333
662 msgid "``(?m)``"
663 msgstr ""
664
665 #: ../../home/runner/work/calibre/calibre/manual/regexp_quick_reference.rst:333
666 msgid ""
667 "Makes the ``^`` and ``$`` anchors match the start and end of lines instead "
668 "of the start and end of the entire string."
669 msgstr ""