Debian Codegraph @

translations/manual/ro/server.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # liberi liberi <[email protected]>, 2024
7 # Viorel Frunza, 2022
8 msgid ""
9 msgstr ""
10 "Project-Id-Version: calibre\n"
11 "Report-Msgid-Bugs-To: \n"
12 "POT-Creation-Date: 2024-01-04 02:10+0000\n"
13 "PO-Revision-Date: 2014-06-17 08:36+0000\n"
14 "Last-Translator: liberi liberi <[email protected]>, 2024\n"
15 "Language-Team: Romanian (http://app.transifex.com/calibre/calibre/language/ro/)\n"
16 "MIME-Version: 1.0\n"
17 "Content-Type: text/plain; charset=UTF-8\n"
18 "Content-Transfer-Encoding: 8bit\n"
19 "Language: ro\n"
20 "Plural-Forms: nplurals=3; plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?2:1));\n"
21
22 #: ../../__w/calibre/calibre/manual/server.rst:2
23 msgid "The calibre Content server"
24 msgstr "Serverul de cărți Calibre"
25
26 #: ../../__w/calibre/calibre/manual/server.rst:4
27 msgid ""
28 "The calibre :guilabel:`Content server` allows you to access your calibre "
29 "libraries and read books directly in a browser on your favorite mobile phone"
30 " or tablet device. As a result, you do not need to install any dedicated "
31 "book reading/management apps on your phone. Just use the browser. The server"
32 " downloads and stores the book you are reading in an off-line cache so that "
33 "you can read it even when there is no internet connection."
34 msgstr ""
35
36 #: ../../__w/calibre/calibre/manual/server.rst:13
37 msgid "Contents"
38 msgstr "Conținuturi "
39
40 #: ../../__w/calibre/calibre/manual/server.rst:15
41 msgid ""
42 "To start the server, click the :guilabel:`Connect/share` button and choose "
43 ":guilabel:`Start Content server`. You might get a message from your "
44 "computer's firewall or anti-virus program asking if it is OK to allow access"
45 " to ``calibre.exe``. Click the ``Allow`` or ``OK`` button. Then open a "
46 "browser (preferably Chrome or Firefox) in your computer and type in the "
47 "following address:"
48 msgstr ""
49
50 #: ../../__w/calibre/calibre/manual/server.rst:22
51 msgid "http://127.0.0.1:8080"
52 msgstr ""
53
54 #: ../../__w/calibre/calibre/manual/server.rst:24
55 msgid ""
56 "This will open a page in the browser showing you your calibre libraries, "
57 "click on any one and browse the books in it. Click on a book, and it will "
58 "show you all the metadata about the book, along with buttons to "
59 ":guilabel:`Read book` and :guilabel:`Download book`. Click the "
60 ":guilabel:`Read book` button to start reading the book."
61 msgstr ""
62
63 #: ../../__w/calibre/calibre/manual/server.rst:30
64 msgid ""
65 "The address used above ``http://127.0.0.1:8080`` will only work on the "
66 "computer that is running calibre. To access the server from other "
67 "computers/phones/tablets/etc. you will need to do a little more work, as "
68 "described in the next section."
69 msgstr ""
70
71 #: ../../__w/calibre/calibre/manual/server.rst:37
72 msgid "Accessing the Content server from other devices"
73 msgstr "Accesarea serverului de cărți de la alte aparate"
74
75 #: ../../__w/calibre/calibre/manual/server.rst:39
76 msgid ""
77 "There are two types of remote device access that you will typically need. "
78 "The first, simpler kind is from within your home network. If you are running"
79 " calibre on a computer on your home network and you have also connected your"
80 " other devices to the same home network, then you should be easily able to "
81 "access the server on those devices."
82 msgstr ""
83
84 #: ../../__w/calibre/calibre/manual/server.rst:46
85 msgid "Accessing the server from devices on your home network"
86 msgstr ""
87
88 #: ../../__w/calibre/calibre/manual/server.rst:48
89 msgid ""
90 "After starting the server in calibre as described above, click the "
91 ":guilabel:`Connect/share` button again. Instead of the :guilabel:`Start "
92 "Content server` action, you should see a :guilabel:`Stop Content server` "
93 "action instead. To the right of this action will be listed an IP address and"
94 " port number. These look like a bunch of numbers separated by periods. For "
95 "example::"
96 msgstr ""
97
98 #: ../../__w/calibre/calibre/manual/server.rst:57
99 msgid ""
100 "These numbers tell you what address to use to connect to the server in your "
101 "devices. Following the example above, the address becomes::"
102 msgstr ""
103
104 #: ../../__w/calibre/calibre/manual/server.rst:62
105 msgid ""
106 "The first part of the address is always ``http://`` the next part is the IP "
107 "address, which is the numbers before the comma and finally we have the port "
108 "number which must be added to the IP address with a colon (``:``). If you "
109 "are lucky, that should be all you need and you will be looking at the "
110 "calibre libraries on your device. If not, read on."
111 msgstr ""
112
113 #: ../../__w/calibre/calibre/manual/server.rst:70
114 msgid "Trouble-shooting the home network connection"
115 msgstr ""
116
117 #: ../../__w/calibre/calibre/manual/server.rst:72
118 msgid ""
119 "If you are unable to access the server from your device, try the following "
120 "steps:"
121 msgstr ""
122
123 #: ../../__w/calibre/calibre/manual/server.rst:75
124 msgid ""
125 "Check that the server is running by opening the address "
126 "``http://127.0.0.1:8080`` in a browser running on the same computer as the "
127 "server."
128 msgstr ""
129
130 #: ../../__w/calibre/calibre/manual/server.rst:79
131 msgid ""
132 "Check that your firewall/anti-virus is allowing connections to your computer"
133 " on the port ``8080`` and to the calibre program. The easiest way to "
134 "eliminate the firewall/anti-virus as the source of problems is to "
135 "temporarily turn them both off and then try connecting. You should first "
136 "disconnect from the internet, before turning off the firewall, to keep your "
137 "computer safe."
138 msgstr ""
139
140 #: ../../__w/calibre/calibre/manual/server.rst:86
141 msgid ""
142 "Check that your device and computer are on the same network. This means they"
143 " should both be connected to the same wireless router. In particular neither"
144 " should be using a cellular or ISP provided direct-WiFi connection."
145 msgstr ""
146
147 #: ../../__w/calibre/calibre/manual/server.rst:90
148 msgid ""
149 "If you have non-standard networking setup, it might be that the IP address "
150 "shown on the :guilabel:`Connect/share` menu is incorrect. In such a case you"
151 " will have to figure out what the correct IP address to use is, yourself. "
152 "Unfortunately, given the infinite diversity of network configurations "
153 "possible, it is not possible to give you a roadmap for doing so."
154 msgstr ""
155
156 #: ../../__w/calibre/calibre/manual/server.rst:97
157 msgid ""
158 "If you have setup a username and password, first try it without that to see "
159 "if it is causing issues. Some e-ink devices have browsers that do not handle"
160 " authentication. You can sometimes workaround this by including the username"
161 " and password in the URL, for example: "
162 "``http://username:[email protected]:8080``."
163 msgstr ""
164
165 #: ../../__w/calibre/calibre/manual/server.rst:103
166 msgid ""
167 "If you are stuck, you can always ask for help in the `calibre user forums`_."
168 msgstr ""
169
170 #: ../../__w/calibre/calibre/manual/server.rst:107
171 msgid "Accessing the server from anywhere on the internet"
172 msgstr ""
173
174 #: ../../__w/calibre/calibre/manual/server.rst:111
175 msgid ""
176 "Before doing this you should turn on username/password protection in the "
177 "server, otherwise anyone in the world will be able to access your books. Go "
178 "to :guilabel:`Preferences->Sharing->Sharing over the net` and enable the "
179 "option to :guilabel:`Require username and password to access the content "
180 "server`."
181 msgstr ""
182
183 #: ../../__w/calibre/calibre/manual/server.rst:117
184 msgid ""
185 "While the particular details on setting up internet access vary depending on"
186 " the network configuration and type of computer you are using, the basic "
187 "schema is as follows."
188 msgstr ""
189
190 #: ../../__w/calibre/calibre/manual/server.rst:121
191 msgid ""
192 "Find out the external IP address of the computer you are going to run the "
193 "server on. You can do that by visiting the site `What is my IP address "
194 "<https://www.whatismyip.com/>`_ in a browser running on the computer."
195 msgstr ""
196
197 #: ../../__w/calibre/calibre/manual/server.rst:125
198 msgid ""
199 "If the computer is behind a router, enable port forwarding on the router to "
200 "forward the port ``8080`` (or whatever port you choose to run the calibre "
201 "Content server on) to the computer."
202 msgstr ""
203
204 #: ../../__w/calibre/calibre/manual/server.rst:129
205 msgid ""
206 "Make sure the calibre server is allowed through any firewalls/anti-virus "
207 "programs on your computer."
208 msgstr ""
209
210 #: ../../__w/calibre/calibre/manual/server.rst:132
211 msgid ""
212 "Now you should be able to access the server on any internet-connected device"
213 " using the IP address you found in the first step. For example, if the IP "
214 "address you found was ``123.123.123.123`` and the port you are using for the"
215 " calibre server is ``8080``, the address to use on your device becomes: "
216 "``http://123.123.123.123:8080``."
217 msgstr ""
218
219 #: ../../__w/calibre/calibre/manual/server.rst:138
220 msgid ""
221 "Optionally, use a service like `no-ip <https://www.noip.com/free>`_ to setup"
222 " an easy to remember address to use instead of the IP address you found in "
223 "the first step."
224 msgstr ""
225
226 #: ../../__w/calibre/calibre/manual/server.rst:143
227 msgid ""
228 "For maximum security, you should also enable HTTPS on the Content server. "
229 "You can either do so directly in the server by providing the path to the "
230 "HTTPS certificate to use in the advanced configuration options for the "
231 "server, or you can setup a reverse proxy as described below, to use an "
232 "existing HTTPS setup."
233 msgstr ""
234
235 #: ../../__w/calibre/calibre/manual/server.rst:151
236 msgid "The server interface"
237 msgstr ""
238
239 #: ../../__w/calibre/calibre/manual/server.rst:153
240 msgid ""
241 "The server interface is a simplified version of the main calibre interface, "
242 "optimised for use with touch screens. The home screen shows you books you "
243 "are currently reading as well as allowing to choose a calibre library you "
244 "want to browse. The server in calibre gives you access to all your "
245 "libraries, not just a single one, as before."
246 msgstr ""
247
248 #: ../../__w/calibre/calibre/manual/server.rst:160
249 msgid "The book list"
250 msgstr ""
251
252 #: ../../__w/calibre/calibre/manual/server.rst:162
253 msgid ""
254 "The server book list is a simple grid of covers. Tap on a cover to see the "
255 "detailed metadata for a book, or to read the book. If you prefer a more "
256 "detailed list, you can change the default view by clicking the three "
257 "vertical dots in the top right corner."
258 msgstr ""
259
260 #: ../../__w/calibre/calibre/manual/server.rst:167
261 msgid ""
262 "Sorting and searching of the book list should be familiar to calibre users. "
263 "They can be accessed by clicking their icons in the top right area. They "
264 "both work exactly the same as in the main calibre program. The search page "
265 "even allows you to construct search queries by clicking on "
266 "authors/tags/etc., just as you can using the Tag browser in the main "
267 "program."
268 msgstr ""
269
270 #: ../../__w/calibre/calibre/manual/server.rst:173
271 msgid ""
272 "A much loved feature of the main program, :guilabel:`Virtual libraries` is "
273 "present in the server interface as well. Click the three vertical dots in "
274 "the top right corner to choose a Virtual library."
275 msgstr ""
276
277 #: ../../__w/calibre/calibre/manual/server.rst:178
278 msgid "The book reader"
279 msgstr ""
280
281 #: ../../__w/calibre/calibre/manual/server.rst:180
282 msgid ""
283 "You can read any book in your calibre library by simply tapping on it and "
284 "then tapping the :guilabel:`Read book` button. The books reader is very "
285 "simple to operate. You can both tap and swipe to turn pages. Swiping up/down"
286 " skips between chapters. Tapping the top quarter of the screen gets you the "
287 "detailed controls and viewer preferences."
288 msgstr ""
289
290 #: ../../__w/calibre/calibre/manual/server.rst:186
291 msgid ""
292 "If you leave the Content server running, you can even open the same book on "
293 "multiple devices and it will remember your last read position. If it does "
294 "not you can force a sync by tapping in the top quarter and choosing "
295 ":guilabel:`Sync`."
296 msgstr ""
297
298 #: ../../__w/calibre/calibre/manual/server.rst:192
299 msgid "Browser support"
300 msgstr ""
301
302 #: ../../__w/calibre/calibre/manual/server.rst:194
303 msgid ""
304 "The new calibre server makes lots of use of advanced HTML 5 and CSS 3 "
305 "features. As such it requires an up-to-date browser to use. It has been "
306 "tested on Android Chrome and iOS Safari as well as Chrome and Firefox on the"
307 " desktop."
308 msgstr ""
309
310 #: ../../__w/calibre/calibre/manual/server.rst:198
311 msgid ""
312 "The server is careful to use functionality that has either been already "
313 "standardised or is on the standards track. As such if it does not currently "
314 "work with your favorite browser, it probably will once that browser has "
315 "caught up."
316 msgstr ""
317
318 #: ../../__w/calibre/calibre/manual/server.rst:203
319 msgid ""
320 "If you are using a particularly old or limited browser or you don't like to "
321 "run JavaScript, you can use the *mobile* view, by simply adding ``/mobile`` "
322 "to the server address."
323 msgstr ""
324
325 #: ../../__w/calibre/calibre/manual/server.rst:208
326 msgid ""
327 "On iOS, Apple allows only a single browser engine, so Firefox, Chrome and "
328 "Safari are all actually the same browser under the hood. The new server "
329 "interface requires iOS 10.3.2 or newer. On Android, the server has been "
330 "tested with Chrome version 58 and newer."
331 msgstr ""
332
333 #: ../../__w/calibre/calibre/manual/server.rst:214
334 msgid "Enabling offline support"
335 msgstr ""
336
337 #: ../../__w/calibre/calibre/manual/server.rst:216
338 msgid ""
339 "Browser makers have been trying to force people to use SSL by disabling "
340 "advanced features in their browsers for plain HTTP connections. One such "
341 "casualty is offline support. So you may need to enable HTTPS on the server "
342 "to get offline support working. In addition, in Firefox on Android, you will"
343 " need to type ``about:config`` and search for ``browser.tabs.useCache`` and "
344 "toggle it to ``true``."
345 msgstr ""
346
347 #: ../../__w/calibre/calibre/manual/server.rst:224
348 msgid "Managing user accounts from the command-line only"
349 msgstr ""
350
351 #: ../../__w/calibre/calibre/manual/server.rst:226
352 msgid ""
353 "The calibre program has a nice section in :guilabel:`Preferences` to allow "
354 "you to manage user accounts for the server. However, if you want to run the "
355 "standalone server and cannot run the main calibre program on the same "
356 "computer/user account, you can also manage users using just the command-"
357 "line."
358 msgstr ""
359
360 #: ../../__w/calibre/calibre/manual/server.rst:231
361 msgid ""
362 "You can manage user accounts using the ``--manage-users`` option to the "
363 "standalone ``calibre-server`` program. Suppose you want to store the user "
364 "database in the folder ``/srv/calibre``, then you create it by running::"
365 msgstr ""
366
367 #: ../../__w/calibre/calibre/manual/server.rst:238
368 msgid ""
369 "Just follow the prompts to create user accounts, set their permission, etc. "
370 "Once you are done, you can run the server as::"
371 msgstr ""
372
373 #: ../../__w/calibre/calibre/manual/server.rst:243
374 msgid "It will use the user accounts you created in the previous step."
375 msgstr ""
376
377 #: ../../__w/calibre/calibre/manual/server.rst:247
378 msgid "Integrating the calibre Content server into other servers"
379 msgstr ""
380
381 #: ../../__w/calibre/calibre/manual/server.rst:249
382 msgid ""
383 "Here, we will show you how to integrate the calibre Content server into "
384 "another server. The most common reason for this is to make use of SSL or to "
385 "serve the calibre library as part of a larger site. The basic technique is "
386 "to run the calibre server and setup a reverse proxy to it from the main "
387 "server."
388 msgstr ""
389
390 #: ../../__w/calibre/calibre/manual/server.rst:254
391 msgid ""
392 "A reverse proxy is when your normal server accepts incoming requests and "
393 "passes them onto the calibre server. It then reads the response from the "
394 "calibre server and forwards it to the client. This means that you can simply"
395 " run the calibre server as normal without trying to integrate it closely "
396 "with your main server."
397 msgstr ""
398
399 #: ../../__w/calibre/calibre/manual/server.rst:261
400 msgid "Using a full virtual host"
401 msgstr ""
402
403 #: ../../__w/calibre/calibre/manual/server.rst:263
404 msgid ""
405 "The simplest configuration is to dedicate a full virtual host to the calibre"
406 " server. In this case, run the calibre server as::"
407 msgstr ""
408
409 #: ../../__w/calibre/calibre/manual/server.rst:268
410 msgid ""
411 "Now setup the virtual host in your main server, for example, for nginx::"
412 msgstr ""
413
414 #: ../../__w/calibre/calibre/manual/server.rst:283
415 msgid "Or, for Apache::"
416 msgstr ""
417
418 #: ../../__w/calibre/calibre/manual/server.rst:298
419 msgid "Using a URL prefix"
420 msgstr ""
421
422 #: ../../__w/calibre/calibre/manual/server.rst:300
423 msgid ""
424 "If you do not want to dedicate a full virtual host to calibre, you can have "
425 "it use a URL prefix. Start the calibre server as::"
426 msgstr ""
427
428 #: ../../__w/calibre/calibre/manual/server.rst:305
429 msgid ""
430 "The key parameter here is ``--url-prefix /calibre``. This causes the Content"
431 " server to serve all URLs prefixed by ``/calibre``. To see this in action, "
432 "visit ``http://localhost:8080/calibre`` in your browser. You should see the "
433 "normal Content server website, but now it will run under ``/calibre``."
434 msgstr ""
435
436 #: ../../__w/calibre/calibre/manual/server.rst:307
437 msgid "With nginx, the required configuration is::"
438 msgstr ""
439
440 #: ../../__w/calibre/calibre/manual/server.rst:324
441 msgid ""
442 "For Apache, first enable the proxy modules in Apache, by adding the "
443 "following to :file:`httpd.conf`::"
444 msgstr ""
445
446 #: ../../__w/calibre/calibre/manual/server.rst:329
447 msgid ""
448 "The exact technique for enabling the proxy modules will vary depending on "
449 "your Apache installation. Once you have the proxy modules enabled, add the "
450 "following rules to :file:`httpd.conf` (or if you are using virtual hosts to "
451 "the conf file for the virtual host in question)::"
452 msgstr ""
453
454 #: ../../__w/calibre/calibre/manual/server.rst:336
455 msgid ""
456 "That's all, you will now be able to access the calibre Content server under "
457 "the ``/calibre`` URL in your main server. The above rules pass all requests "
458 "under ``/calibre`` to the calibre server running on port 8080 and thanks to "
459 "the ``--url-prefix`` option above, the calibre server handles them "
460 "transparently."
461 msgstr ""
462
463 #: ../../__w/calibre/calibre/manual/server.rst:341
464 msgid ""
465 "When using a reverse proxy, you should tell the calibre Content server to "
466 "only listen on localhost, by using ``--listen-on 127.0.0.1``. That way, the "
467 "server will only listen for connections coming from the same computer, i.e. "
468 "from the reverse proxy."
469 msgstr ""
470
471 #: ../../__w/calibre/calibre/manual/server.rst:348
472 msgid ""
473 "If you have setup SSL for your main server, you should tell the calibre "
474 "server to use basic authentication instead of digest authentication, as it "
475 "is faster. To do so, pass the ``--auth-mode=basic`` option to ``calibre-"
476 "server``."
477 msgstr ""
478
479 #: ../../__w/calibre/calibre/manual/server.rst:357
480 msgid "Creating a service for the calibre server on a modern Linux system"
481 msgstr ""
482
483 #: ../../__w/calibre/calibre/manual/server.rst:359
484 msgid ""
485 "You can easily create a service to run calibre at boot on a modern (`systemd"
486 " <https://www.freedesktop.org/wiki/Software/systemd/>`_) based Linux system."
487 " Just create the file ``/etc/systemd/system/calibre-server.service`` with "
488 "the contents shown below::"
489 msgstr ""
490
491 #: ../../__w/calibre/calibre/manual/server.rst:378
492 msgid ""
493 "Change ``mylinuxuser`` and ``mylinuxgroup`` to whatever user and group you "
494 "want the server to run as. This should be the same user and group that own "
495 "the files in the calibre library folder. Note that it is generally not a "
496 "good idea to run the server as root. Also change the path to the calibre "
497 "library folder to suit your system. You can add multiple libraries if "
498 "needed. See the help for the ``calibre-server`` command."
499 msgstr ""
500
501 #: ../../__w/calibre/calibre/manual/server.rst:385
502 msgid "Now run::"
503 msgstr ""
504
505 #: ../../__w/calibre/calibre/manual/server.rst:389
506 msgid "to start the server. Check its status with::"
507 msgstr ""
508
509 #: ../../__w/calibre/calibre/manual/server.rst:393
510 msgid "To make it start at boot, run::"
511 msgstr ""
512
513 #: ../../__w/calibre/calibre/manual/server.rst:399
514 msgid ""
515 "The calibre server *does not* need a running X server, but it does need the "
516 "X libraries installed as some components it uses link against them."
517 msgstr ""
518
519 #: ../../__w/calibre/calibre/manual/server.rst:404
520 msgid ""
521 "The calibre server also supports systemd socket activation, so you can use "
522 "that, if needed, as well."
523 msgstr ""