Debian Codegraph @

translations/manual/eu/server.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # Gorka Azkarate Zubiaur <[email protected]>, 2016
7 # Unai Cabanzon <[email protected]>, 2021
8 msgid ""
9 msgstr ""
10 "Project-Id-Version: calibre\n"
11 "Report-Msgid-Bugs-To: \n"
12 "POT-Creation-Date: 2024-05-29 02:47+0000\n"
13 "PO-Revision-Date: 2014-06-17 08:36+0000\n"
14 "Last-Translator: Unai Cabanzon <[email protected]>, 2021\n"
15 "Language-Team: Basque (http://app.transifex.com/calibre/calibre/language/eu/)\n"
16 "MIME-Version: 1.0\n"
17 "Content-Type: text/plain; charset=UTF-8\n"
18 "Content-Transfer-Encoding: 8bit\n"
19 "Language: eu\n"
20 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
21
22 #: ../../__w/calibre/calibre/manual/server.rst:2
23 msgid "The calibre Content server"
24 msgstr "Calibreren eduki zerbitzaria"
25
26 #: ../../__w/calibre/calibre/manual/server.rst:4
27 msgid ""
28 "The calibre :guilabel:`Content server` allows you to access your calibre "
29 "libraries and read books directly in a browser on your favorite mobile phone"
30 " or tablet device. As a result, you do not need to install any dedicated "
31 "book reading/management apps on your phone. Just use the browser. The server"
32 " downloads and stores the book you are reading in an off-line cache so that "
33 "you can read it even when there is no internet connection."
34 msgstr ""
35
36 #: ../../__w/calibre/calibre/manual/server.rst:13
37 msgid "Contents"
38 msgstr "Edukiak"
39
40 #: ../../__w/calibre/calibre/manual/server.rst:15
41 msgid ""
42 "To start the server, click the :guilabel:`Connect/share` button and choose "
43 ":guilabel:`Start Content server`. You might get a message from your "
44 "computer's firewall or anti-virus program asking if it is OK to allow access"
45 " to ``calibre.exe``. Click the ``Allow`` or ``OK`` button. Then open a "
46 "browser (preferably Chrome or Firefox) in your computer and type in the "
47 "following address:"
48 msgstr ""
49
50 #: ../../__w/calibre/calibre/manual/server.rst:22
51 msgid "http://127.0.0.1:8080"
52 msgstr ""
53
54 #: ../../__w/calibre/calibre/manual/server.rst:24
55 msgid ""
56 "This will open a page in the browser showing you your calibre libraries, "
57 "click on any one and browse the books in it. Click on a book, and it will "
58 "show you all the metadata about the book, along with buttons to "
59 ":guilabel:`Read` and :guilabel:`Download` the book. Click the "
60 ":guilabel:`Read` button to start reading the book."
61 msgstr ""
62
63 #: ../../__w/calibre/calibre/manual/server.rst:30
64 msgid ""
65 "The address used above ``http://127.0.0.1:8080`` will only work on the "
66 "computer that is running calibre. To access the server from other "
67 "computers/phones/tablets/etc. you will need to do a little more work, as "
68 "described in the next section."
69 msgstr ""
70
71 #: ../../__w/calibre/calibre/manual/server.rst:37
72 msgid "Accessing the Content server from other devices"
73 msgstr ""
74
75 #: ../../__w/calibre/calibre/manual/server.rst:39
76 msgid ""
77 "There are two types of remote device access that you will typically need. "
78 "The first, simpler kind is from within your home network. If you are running"
79 " calibre on a computer on your home network and you have also connected your"
80 " other devices to the same home network, then you should be easily able to "
81 "access the server on those devices."
82 msgstr ""
83
84 #: ../../__w/calibre/calibre/manual/server.rst:46
85 msgid "Accessing the server from devices on your home network"
86 msgstr "Zure etxe sareko gailuekin zerbitzarira sartzen"
87
88 #: ../../__w/calibre/calibre/manual/server.rst:48
89 msgid ""
90 "After starting the server in calibre as described above, click the "
91 ":guilabel:`Connect/share` button again. Instead of the :guilabel:`Start "
92 "Content server` action, you should see a :guilabel:`Stop Content server` "
93 "action instead. To the right of this action will be listed an IP address and"
94 " port number. These look like a bunch of numbers separated by periods. For "
95 "example::"
96 msgstr ""
97
98 #: ../../__w/calibre/calibre/manual/server.rst:57
99 msgid ""
100 "These numbers tell you what address to use to connect to the server in your "
101 "devices. Following the example above, the address becomes::"
102 msgstr ""
103
104 #: ../../__w/calibre/calibre/manual/server.rst:62
105 msgid ""
106 "The first part of the address is always ``http://`` the next part is the IP "
107 "address, which is the numbers before the comma and finally we have the port "
108 "number which must be added to the IP address with a colon (``:``). If you "
109 "are lucky, that should be all you need and you will be looking at the "
110 "calibre libraries on your device. If not, read on."
111 msgstr ""
112
113 #: ../../__w/calibre/calibre/manual/server.rst:70
114 msgid "Trouble-shooting the home network connection"
115 msgstr ""
116
117 #: ../../__w/calibre/calibre/manual/server.rst:72
118 msgid ""
119 "If you are unable to access the server from your device, try the following "
120 "steps:"
121 msgstr ""
122
123 #: ../../__w/calibre/calibre/manual/server.rst:75
124 msgid ""
125 "Check that the server is running by opening the address "
126 "``http://127.0.0.1:8080`` in a browser running on the same computer as the "
127 "server."
128 msgstr ""
129
130 #: ../../__w/calibre/calibre/manual/server.rst:79
131 msgid ""
132 "Check that your firewall/anti-virus is allowing connections to your computer"
133 " on the port ``8080`` and to the calibre program. The easiest way to "
134 "eliminate the firewall/anti-virus as the source of problems is to "
135 "temporarily turn them both off and then try connecting. You should first "
136 "disconnect from the internet, before turning off the firewall, to keep your "
137 "computer safe."
138 msgstr ""
139
140 #: ../../__w/calibre/calibre/manual/server.rst:86
141 msgid ""
142 "Check that your device and computer are on the same network. This means they"
143 " should both be connected to the same wireless router. In particular neither"
144 " should be using a cellular or ISP provided direct-WiFi connection."
145 msgstr ""
146
147 #: ../../__w/calibre/calibre/manual/server.rst:90
148 msgid ""
149 "If you have non-standard networking setup, it might be that the IP address "
150 "shown on the :guilabel:`Connect/share` menu is incorrect. In such a case you"
151 " will have to figure out what the correct IP address to use is, yourself. "
152 "Unfortunately, given the infinite diversity of network configurations "
153 "possible, it is not possible to give you a roadmap for doing so."
154 msgstr ""
155
156 #: ../../__w/calibre/calibre/manual/server.rst:97
157 msgid ""
158 "If you have setup a username and password, first try it without that to see "
159 "if it is causing issues. Some e-ink devices have browsers that do not handle"
160 " authentication. You can sometimes workaround this by including the username"
161 " and password in the URL, for example: "
162 "``http://username:[email protected]:8080``."
163 msgstr ""
164
165 #: ../../__w/calibre/calibre/manual/server.rst:103
166 msgid ""
167 "If you are stuck, you can always ask for help in the `calibre user forums`_."
168 msgstr ""
169
170 #: ../../__w/calibre/calibre/manual/server.rst:107
171 msgid "Accessing the server from anywhere on the internet"
172 msgstr ""
173
174 #: ../../__w/calibre/calibre/manual/server.rst:111
175 msgid ""
176 "Before doing this you should turn on username/password protection in the "
177 "server, otherwise anyone in the world will be able to access your books. Go "
178 "to :guilabel:`Preferences->Sharing->Sharing over the net` and enable the "
179 "option to :guilabel:`Require username and password to access the content "
180 "server`."
181 msgstr ""
182
183 #: ../../__w/calibre/calibre/manual/server.rst:117
184 msgid ""
185 "While the particular details on setting up internet access vary depending on"
186 " the network configuration and type of computer you are using, the basic "
187 "schema is as follows."
188 msgstr ""
189
190 #: ../../__w/calibre/calibre/manual/server.rst:121
191 msgid ""
192 "Find out the external IP address of the computer you are going to run the "
193 "server on. You can do that by visiting the site `What is my IP address "
194 "<https://www.whatismyip.com/>`_ in a browser running on the computer."
195 msgstr ""
196
197 #: ../../__w/calibre/calibre/manual/server.rst:125
198 msgid ""
199 "If the computer is behind a router, enable port forwarding on the router to "
200 "forward the port ``8080`` (or whatever port you choose to run the calibre "
201 "Content server on) to the computer."
202 msgstr ""
203
204 #: ../../__w/calibre/calibre/manual/server.rst:129
205 msgid ""
206 "Make sure the calibre server is allowed through any firewalls/anti-virus "
207 "programs on your computer."
208 msgstr ""
209
210 #: ../../__w/calibre/calibre/manual/server.rst:132
211 msgid ""
212 "Now you should be able to access the server on any internet-connected device"
213 " using the IP address you found in the first step. For example, if the IP "
214 "address you found was ``123.123.123.123`` and the port you are using for the"
215 " calibre server is ``8080``, the address to use on your device becomes: "
216 "``http://123.123.123.123:8080``."
217 msgstr ""
218
219 #: ../../__w/calibre/calibre/manual/server.rst:138
220 msgid ""
221 "Optionally, use a service like `no-ip <https://www.noip.com/free>`_ to setup"
222 " an easy to remember address to use instead of the IP address you found in "
223 "the first step."
224 msgstr ""
225
226 #: ../../__w/calibre/calibre/manual/server.rst:143
227 msgid ""
228 "For maximum security, you should also enable HTTPS on the Content server. "
229 "You can either do so directly in the server by providing the path to the "
230 "HTTPS certificate to use in the advanced configuration options for the "
231 "server, or you can setup a reverse proxy as described below, to use an "
232 "existing HTTPS setup."
233 msgstr ""
234
235 #: ../../__w/calibre/calibre/manual/server.rst:151
236 msgid "The server interface"
237 msgstr "Zerbitzari interfazea"
238
239 #: ../../__w/calibre/calibre/manual/server.rst:153
240 msgid ""
241 "The server interface is a simplified version of the main calibre interface, "
242 "optimised for use with touch screens. The home screen shows you books you "
243 "are currently reading as well as allowing to choose a calibre library you "
244 "want to browse. The server in calibre gives you access to all your "
245 "libraries, not just a single one, as before."
246 msgstr ""
247
248 #: ../../__w/calibre/calibre/manual/server.rst:160
249 msgid "The book list"
250 msgstr "Liburu zerrenda"
251
252 #: ../../__w/calibre/calibre/manual/server.rst:162
253 msgid ""
254 "The server book list is a simple grid of covers. Tap on a cover to see the "
255 "detailed metadata for a book, or to read the book. If you prefer a more "
256 "detailed list, you can change the default view by clicking the three "
257 "vertical dots in the top right corner."
258 msgstr ""
259
260 #: ../../__w/calibre/calibre/manual/server.rst:167
261 msgid ""
262 "Sorting and searching of the book list should be familiar to calibre users. "
263 "They can be accessed by clicking their icons in the top right area. They "
264 "both work exactly the same as in the main calibre program. The search page "
265 "even allows you to construct search queries by clicking on "
266 "authors/tags/etc., just as you can using the Tag browser in the main "
267 "program."
268 msgstr ""
269
270 #: ../../__w/calibre/calibre/manual/server.rst:173
271 msgid ""
272 "A much loved feature of the main program, :guilabel:`Virtual libraries` is "
273 "present in the server interface as well. Click the three vertical dots in "
274 "the top right corner to choose a Virtual library."
275 msgstr ""
276
277 #: ../../__w/calibre/calibre/manual/server.rst:178
278 msgid "The book viewer"
279 msgstr ""
280
281 #: ../../__w/calibre/calibre/manual/server.rst:180
282 msgid ""
283 "You can read any book in your calibre library by simply tapping on it and "
284 "then tapping the :guilabel:`Read` button. The book viewer is very simple to "
285 "operate. You can both tap and swipe to turn pages. Swiping up/down skips "
286 "between chapters. Tapping the top quarter of the screen gets you the "
287 "detailed controls and viewer preferences."
288 msgstr ""
289
290 #: ../../__w/calibre/calibre/manual/server.rst:186
291 msgid ""
292 "If you leave the Content server running, you can even open the same book on "
293 "multiple devices and it will remember your last read position. If it does "
294 "not you can force a sync by tapping in the top quarter and choosing "
295 ":guilabel:`Sync`."
296 msgstr ""
297
298 #: ../../__w/calibre/calibre/manual/server.rst:192
299 msgid "Browser support"
300 msgstr ""
301
302 #: ../../__w/calibre/calibre/manual/server.rst:194
303 msgid ""
304 "The new calibre server makes lots of use of advanced HTML 5 and CSS 3 "
305 "features. As such it requires an up-to-date browser to use. It has been "
306 "tested on Android Chrome and iOS Safari as well as Chrome and Firefox on the"
307 " desktop."
308 msgstr ""
309
310 #: ../../__w/calibre/calibre/manual/server.rst:198
311 msgid ""
312 "The server is careful to use functionality that has either been already "
313 "standardised or is on the standards track. As such if it does not currently "
314 "work with your favorite browser, it probably will once that browser has "
315 "caught up."
316 msgstr ""
317
318 #: ../../__w/calibre/calibre/manual/server.rst:203
319 msgid ""
320 "If you are using a particularly old or limited browser or you don't like to "
321 "run JavaScript, you can use the *mobile* view, by simply adding ``/mobile`` "
322 "to the server address."
323 msgstr ""
324
325 #: ../../__w/calibre/calibre/manual/server.rst:208
326 msgid ""
327 "On iOS, Apple allows only a single browser engine, so Firefox, Chrome and "
328 "Safari are all actually the same browser under the hood. The new server "
329 "interface requires iOS 10.3.2 or newer. On Android, the server has been "
330 "tested with Chrome version 58 and newer."
331 msgstr ""
332
333 #: ../../__w/calibre/calibre/manual/server.rst:214
334 msgid "Enabling offline support"
335 msgstr ""
336
337 #: ../../__w/calibre/calibre/manual/server.rst:216
338 msgid ""
339 "Browser makers have been trying to force people to use SSL by disabling "
340 "advanced features in their browsers for plain HTTP connections. One such "
341 "casualty is ApplicationCache, which was what was used in calibre for offline"
342 " support. As a result now-a-days sadly, offline mode works only as long as "
343 "you keep the browser tab open. In addition, in Firefox on Android, you will "
344 "need to type ``about:config`` and create a preference called "
345 "``browser.tabs.useCache`` and set it to ``true``."
346 msgstr ""
347
348 #: ../../__w/calibre/calibre/manual/server.rst:225
349 msgid "Managing user accounts from the command-line only"
350 msgstr ""
351
352 #: ../../__w/calibre/calibre/manual/server.rst:227
353 msgid ""
354 "The calibre program has a nice section in :guilabel:`Preferences` to allow "
355 "you to manage user accounts for the server. However, if you want to run the "
356 "standalone server and cannot run the main calibre program on the same "
357 "computer/user account, you can also manage users using just the command-"
358 "line."
359 msgstr ""
360
361 #: ../../__w/calibre/calibre/manual/server.rst:232
362 msgid ""
363 "You can manage user accounts using the ``--manage-users`` option to the "
364 "standalone ``calibre-server`` program. Suppose you want to store the user "
365 "database in the folder ``/srv/calibre``, then you create it by running::"
366 msgstr ""
367
368 #: ../../__w/calibre/calibre/manual/server.rst:239
369 msgid ""
370 "Just follow the prompts to create user accounts, set their permission, etc. "
371 "Once you are done, you can run the server as::"
372 msgstr ""
373
374 #: ../../__w/calibre/calibre/manual/server.rst:244
375 msgid "It will use the user accounts you created in the previous step."
376 msgstr ""
377
378 #: ../../__w/calibre/calibre/manual/server.rst:248
379 msgid "Integrating the calibre Content server into other servers"
380 msgstr ""
381
382 #: ../../__w/calibre/calibre/manual/server.rst:250
383 msgid ""
384 "Here, we will show you how to integrate the calibre Content server into "
385 "another server. The most common reason for this is to make use of SSL or to "
386 "serve the calibre library as part of a larger site. The basic technique is "
387 "to run the calibre server and setup a reverse proxy to it from the main "
388 "server."
389 msgstr ""
390
391 #: ../../__w/calibre/calibre/manual/server.rst:255
392 msgid ""
393 "A reverse proxy is when your normal server accepts incoming requests and "
394 "passes them onto the calibre server. It then reads the response from the "
395 "calibre server and forwards it to the client. This means that you can simply"
396 " run the calibre server as normal without trying to integrate it closely "
397 "with your main server."
398 msgstr ""
399
400 #: ../../__w/calibre/calibre/manual/server.rst:262
401 msgid "Using a full virtual host"
402 msgstr ""
403
404 #: ../../__w/calibre/calibre/manual/server.rst:264
405 msgid ""
406 "The simplest configuration is to dedicate a full virtual host to the calibre"
407 " server. In this case, run the calibre server as::"
408 msgstr ""
409
410 #: ../../__w/calibre/calibre/manual/server.rst:269
411 msgid ""
412 "Now setup the virtual host in your main server, for example, for nginx::"
413 msgstr ""
414
415 #: ../../__w/calibre/calibre/manual/server.rst:284
416 msgid "Or, for Apache::"
417 msgstr ""
418
419 #: ../../__w/calibre/calibre/manual/server.rst:299
420 msgid "Using a URL prefix"
421 msgstr ""
422
423 #: ../../__w/calibre/calibre/manual/server.rst:301
424 msgid ""
425 "If you do not want to dedicate a full virtual host to calibre, you can have "
426 "it use a URL prefix. Start the calibre server as::"
427 msgstr ""
428
429 #: ../../__w/calibre/calibre/manual/server.rst:306
430 msgid ""
431 "The key parameter here is ``--url-prefix /calibre``. This causes the Content"
432 " server to serve all URLs prefixed by ``/calibre``. To see this in action, "
433 "visit ``http://localhost:8080/calibre`` in your browser. You should see the "
434 "normal Content server website, but now it will run under ``/calibre``."
435 msgstr ""
436
437 #: ../../__w/calibre/calibre/manual/server.rst:308
438 msgid "With nginx, the required configuration is::"
439 msgstr ""
440
441 #: ../../__w/calibre/calibre/manual/server.rst:325
442 msgid ""
443 "For Apache, first enable the proxy modules in Apache, by adding the "
444 "following to :file:`httpd.conf`::"
445 msgstr ""
446
447 #: ../../__w/calibre/calibre/manual/server.rst:330
448 msgid ""
449 "The exact technique for enabling the proxy modules will vary depending on "
450 "your Apache installation. Once you have the proxy modules enabled, add the "
451 "following rules to :file:`httpd.conf` (or if you are using virtual hosts to "
452 "the conf file for the virtual host in question)::"
453 msgstr ""
454
455 #: ../../__w/calibre/calibre/manual/server.rst:337
456 msgid ""
457 "That's all, you will now be able to access the calibre Content server under "
458 "the ``/calibre`` URL in your main server. The above rules pass all requests "
459 "under ``/calibre`` to the calibre server running on port 8080 and thanks to "
460 "the ``--url-prefix`` option above, the calibre server handles them "
461 "transparently."
462 msgstr ""
463
464 #: ../../__w/calibre/calibre/manual/server.rst:342
465 msgid ""
466 "When using a reverse proxy, you should tell the calibre Content server to "
467 "only listen on localhost, by using ``--listen-on 127.0.0.1``. That way, the "
468 "server will only listen for connections coming from the same computer, i.e. "
469 "from the reverse proxy."
470 msgstr ""
471
472 #: ../../__w/calibre/calibre/manual/server.rst:349
473 msgid ""
474 "If you have setup SSL for your main server, you should tell the calibre "
475 "server to use basic authentication instead of digest authentication, as it "
476 "is faster. To do so, pass the ``--auth-mode=basic`` option to ``calibre-"
477 "server``."
478 msgstr ""
479
480 #: ../../__w/calibre/calibre/manual/server.rst:358
481 msgid "Creating a service for the calibre server on a modern Linux system"
482 msgstr ""
483
484 #: ../../__w/calibre/calibre/manual/server.rst:360
485 msgid ""
486 "You can easily create a service to run calibre at boot on a modern (`systemd"
487 " <https://www.freedesktop.org/wiki/Software/systemd/>`_) based Linux system."
488 " Just create the file ``/etc/systemd/system/calibre-server.service`` with "
489 "the contents shown below::"
490 msgstr ""
491
492 #: ../../__w/calibre/calibre/manual/server.rst:379
493 msgid ""
494 "Change ``mylinuxuser`` and ``mylinuxgroup`` to whatever user and group you "
495 "want the server to run as. This should be the same user and group that own "
496 "the files in the calibre library folder. Note that it is generally not a "
497 "good idea to run the server as root. Also change the path to the calibre "
498 "library folder to suit your system. You can add multiple libraries if "
499 "needed. See the help for the ``calibre-server`` command."
500 msgstr ""
501
502 #: ../../__w/calibre/calibre/manual/server.rst:386
503 msgid "Now run::"
504 msgstr ""
505
506 #: ../../__w/calibre/calibre/manual/server.rst:390
507 msgid "to start the server. Check its status with::"
508 msgstr ""
509
510 #: ../../__w/calibre/calibre/manual/server.rst:394
511 msgid "To make it start at boot, run::"
512 msgstr ""
513
514 #: ../../__w/calibre/calibre/manual/server.rst:400
515 msgid ""
516 "The calibre server *does not* need a running X server, but it does need the "
517 "X libraries installed as some components it uses link against them."
518 msgstr ""
519
520 #: ../../__w/calibre/calibre/manual/server.rst:405
521 msgid ""
522 "The calibre server also supports systemd socket activation, so you can use "
523 "that, if needed, as well."
524 msgstr ""