Debian Codegraph @

translations/manual/de/conversion.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # Anne K <[email protected]>, 2014
7 # Armin Geller <[email protected]>, 2015
8 # Ettore Atalan <[email protected]>, 2014
9 # Horst Schwickart, 2022
10 # ILB, 2014
11 # ILB, 2014
12 # Jörn Berrisch <[email protected]>, 2016
13 # Marek Albrecht, 2026
14 # 3Stadt <[email protected]>, 2017,2019
15 # M. Schneider <[email protected]>, 2020
16 # Sohalt <[email protected]>, 2016
17 # Patrick Köll <[email protected]>, 2016
18 # Philip De, 2016
19 # Simon Schütte, 2015-2016
20 # RiseT, 2015-2016,2021
21 msgid ""
22 msgstr ""
23 "Project-Id-Version: calibre\n"
24 "Report-Msgid-Bugs-To: \n"
25 "POT-Creation-Date: 2026-02-17 16:44+0000\n"
26 "PO-Revision-Date: 2014-06-17 08:34+0000\n"
27 "Last-Translator: Marek Albrecht, 2026\n"
28 "Language-Team: German (http://app.transifex.com/calibre/calibre/language/de/)\n"
29 "MIME-Version: 1.0\n"
30 "Content-Type: text/plain; charset=UTF-8\n"
31 "Content-Transfer-Encoding: 8bit\n"
32 "Language: de\n"
33 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
34
35 #: ../../../__w/calibre/calibre/manual/conversion.rst:4
36 msgid "E-book conversion"
37 msgstr "eBook Konvertierung"
38
39 #: ../../../__w/calibre/calibre/manual/conversion.rst:6
40 msgid ""
41 "calibre has a conversion system that is designed to be very easy to use. "
42 "Normally, you just add a book to calibre, click convert and calibre will try"
43 " hard to generate output that is as close as possible to the input. However,"
44 " calibre accepts a very large number of input formats, not all of which are "
45 "as suitable as others for conversion to e-books. In the case of such input "
46 "formats, or if you just want greater control over the conversion system, "
47 "calibre has a lot of options to fine tune the conversion process. Note "
48 "however that calibre's conversion system is not a substitute for a full "
49 "blown e-book editor. To edit e-books, I recommend first converting them to "
50 "EPUB or AZW3 using calibre and then using the :guilabel:`Edit book` feature "
51 "to get them into perfect shape. You can then use the edited e-book as input "
52 "for conversion into other formats in calibre."
53 msgstr "Calibre verfügt über ein Konvertierungssystem, das so konzipiert ist, dass es sehr einfach zu bedienen ist. \nNormalerweise fügen Sie einfach ein Buch zu Calibre hinzu, klicken auf \"Konvertieren\" und calibre wird sich bemühen, eine Ausgabe zu erzeugen, die so nah wie möglich an der Eingabe liegt. Calibre akzeptiert jedoch eine sehr große Anzahl von Eingabeformaten, von denen nicht alle so gut wie andere für die Konvertierung in E-Books geeignet sind. Im Falle solcher Eingabeformate oder wenn Sie einfach eine größere Kontrolle über das Konvertierungssystem wünschen, bietet Calibre eine Vielzahl von Optionen zur Feinabstimmung des Konvertierungsprozesses. \nBeachten Sie jedoch, dass das Konvertierungssystem von Calibre kein Ersatz für einen ausgewachsenen E-Book-Editor ist. Um E-Books zu bearbeiten, empfehle ich, sie zunächst mit Calibre in EPUB oder AZW3 zu konvertieren und dann die :guilabel:`Edit book`-Funktion zu verwenden, um sie in eine perfekte Form zu bringen. \nSie können dann das bearbeitete E-Book in Calibre als Input für die Konvertierung in andere Formate verwenden."
54
55 #: ../../../__w/calibre/calibre/manual/conversion.rst:18
56 msgid ""
57 "This document will refer mainly to the conversion settings as found in the "
58 "conversion dialog, pictured below. All these settings are also available via"
59 " command line interface to conversion, documented at "
60 ":doc:`generated/en/ebook-convert`. In calibre, you can obtain help on any "
61 "individual setting by holding your mouse over it, a tooltip will appear "
62 "describing the setting."
63 msgstr "Dieses Dokument bezieht sich hauptsächlich auf die Konvertierungseinstellungen, wie sie im Konvertieren-Dialog unten dargestellt werden. Alle diese Einstellungen sind auch über die Befehlszeilenschnittstelle zur Konvertierung verfügbar, wie in :doc:`generated/de/ebook-convert` dokumentiert.\nIn Calibre können Sie für jede einzelne Einstellung Hilfe erhalten, indem Sie Ihren Mauszeiger über diese bewegen. Es erscheint dann eine Kurzinfo, welche die Einstellung beschreibt."
64
65 #: ../../../__w/calibre/calibre/manual/conversion.rst:24
66 msgid "E-book conversion dialog"
67 msgstr ""
68
69 #: ../../../__w/calibre/calibre/manual/conversion.rst:31
70 #: ../../../__w/calibre/calibre/manual/conversion.rst:95
71 msgid "Contents"
72 msgstr "Inhalt"
73
74 #: ../../../__w/calibre/calibre/manual/conversion.rst:36
75 msgid "Introduction"
76 msgstr "Einführung"
77
78 #: ../../../__w/calibre/calibre/manual/conversion.rst:42
79 msgid ""
80 "The first thing to understand about the conversion system is that it is "
81 "designed as a pipeline. Schematically, it looks like this:"
82 msgstr "Zuerst sollten Sie verstehen, wie der Konvertierungsprozess strukturiert ist. Schematisch läuft eine Konvertierung wie folgt ab:"
83
84 #: ../../../__w/calibre/calibre/manual/conversion.rst:45
85 msgid "The conversion pipeline"
86 msgstr "Der Konvertierungsprozess"
87
88 #: ../../../__w/calibre/calibre/manual/conversion.rst:49
89 msgid ""
90 "The input format is first converted to XHTML by the appropriate *Input "
91 "plugin*. This HTML is then *transformed*. In the last step, the processed "
92 "XHTML is converted to the specified output format by the appropriate *Output"
93 " plugin*. The results of the conversion can vary greatly, based on the input"
94 " format. Some formats convert much better than others. A list of the best "
95 "source formats for conversion is available :ref:`here <best-source-"
96 "formats>`."
97 msgstr "Das Eingabeformat wird zunächst durch das entsprechende *Eingabe-Plugin* in XHTML umgewandelt. Dieses HTML wird dann *transformiert*. Im letzten Schritt wird das verarbeitete XHTML durch das entsprechende *Output-Plugin* in das angegebene Ausgabeformat umgewandelt. Die Ergebnisse der Konvertierung können je nach Eingabeformat sehr unterschiedlich ausfallen. Manche Formate lassen sich viel besser konvertieren als andere. Eine Liste der besten Quellformate für die Konvertierung finden Sie :ref:`hier<best-source-formats>`."
98
99 #: ../../../__w/calibre/calibre/manual/conversion.rst:56
100 msgid ""
101 "The transforms that act on the XHTML output are where all the work happens. "
102 "There are various transforms, for example, to insert book metadata as a page"
103 " at the start of the book, to detect chapter headings and automatically "
104 "create a Table of Contents, to proportionally adjust font sizes, et cetera. "
105 "It is important to remember that all the transforms act on the XHTML output "
106 "by the *Input plugin*, not on the input file itself. So, for example, if you"
107 " ask calibre to convert an RTF file to EPUB, it will first be converted to "
108 "XHTML internally, the various transforms will be applied to the XHTML and "
109 "then the *Output plugin* will create the EPUB file, automatically generating"
110 " all metadata, Table of Contents, et cetera."
111 msgstr ""
112
113 #: ../../../__w/calibre/calibre/manual/conversion.rst:65
114 msgid ""
115 "You can see this process in action by using the debug option |dbgi|. Just "
116 "specify the path to a folder for the debug output. During conversion, "
117 "calibre will place the XHTML generated by the various stages of the "
118 "conversion pipeline in different sub-folders. The four sub-folders are:"
119 msgstr ""
120
121 #: ../../../__w/calibre/calibre/manual/conversion.rst:38
122 msgid "Debug icon"
123 msgstr ""
124
125 #: ../../../__w/calibre/calibre/manual/conversion.rst:70
126 msgid "Stages of the conversion pipeline"
127 msgstr "Stadien des Konvertierungsprozesses"
128
129 #: ../../../__w/calibre/calibre/manual/conversion.rst:73
130 msgid "Folder"
131 msgstr "Ordner"
132
133 #: ../../../__w/calibre/calibre/manual/conversion.rst:73
134 msgid "Description"
135 msgstr "Beschreibung"
136
137 #: ../../../__w/calibre/calibre/manual/conversion.rst:75
138 msgid "input"
139 msgstr "input"
140
141 #: ../../../__w/calibre/calibre/manual/conversion.rst:75
142 msgid ""
143 "This contains the HTML output by the Input plugin. Use this to debug the "
144 "Input plugin."
145 msgstr ""
146
147 #: ../../../__w/calibre/calibre/manual/conversion.rst:76
148 msgid "parsed"
149 msgstr "parsed"
150
151 #: ../../../__w/calibre/calibre/manual/conversion.rst:76
152 msgid ""
153 "The result of pre-processing and converting to XHTML the output from the "
154 "Input plugin. Use to debug structure detection."
155 msgstr ""
156
157 #: ../../../__w/calibre/calibre/manual/conversion.rst:77
158 msgid "structure"
159 msgstr "Struktur"
160
161 #: ../../../__w/calibre/calibre/manual/conversion.rst:77
162 msgid ""
163 "Post structure detection, but before CSS flattening and font size "
164 "conversion. Use to debug font size conversion and CSS transforms."
165 msgstr ""
166
167 #: ../../../__w/calibre/calibre/manual/conversion.rst:78
168 msgid "processed"
169 msgstr "abgeschlossen"
170
171 #: ../../../__w/calibre/calibre/manual/conversion.rst:78
172 msgid ""
173 "Just before the e-book is passed to the Output plugin. Use to debug the "
174 "Output plugin."
175 msgstr ""
176
177 #: ../../../__w/calibre/calibre/manual/conversion.rst:81
178 msgid ""
179 "If you want to edit the input document a little before having calibre "
180 "convert it, the best thing to do is edit the files in the :file:`input` sub-"
181 "folder, then zip it up, and use the ZIP file as the input format for "
182 "subsequent conversions. To do this use the :guilabel:`Edit meta information`"
183 " dialog to add the ZIP file as a format for the book and then, in the top "
184 "left corner of the conversion dialog, select ZIP as the input format."
185 msgstr ""
186
187 #: ../../../__w/calibre/calibre/manual/conversion.rst:87
188 msgid ""
189 "This document will deal mainly with the various transforms that operate on "
190 "the intermediate XHTML and how to control them. At the end are some tips "
191 "specific to each input/output format."
192 msgstr ""
193
194 #: ../../../__w/calibre/calibre/manual/conversion.rst:91
195 msgid "Look & feel"
196 msgstr "Erscheinungsbild"
197
198 #: ../../../__w/calibre/calibre/manual/conversion.rst:97
199 msgid ""
200 "This group of options controls various aspects of the look and feel of the "
201 "converted e-book."
202 msgstr ""
203
204 #: ../../../__w/calibre/calibre/manual/conversion.rst:102
205 msgid "Fonts"
206 msgstr "Schriftarten"
207
208 #: ../../../__w/calibre/calibre/manual/conversion.rst:104
209 msgid ""
210 "One of the nicest features of the e-reading experience is the ability to "
211 "easily adjust font sizes to suit individual needs and lighting conditions. "
212 "calibre has sophisticated algorithms to ensure that all the books it outputs"
213 " have consistent font sizes, no matter what font sizes are specified in the "
214 "input document."
215 msgstr ""
216
217 #: ../../../__w/calibre/calibre/manual/conversion.rst:109
218 msgid ""
219 "The base font size of a document is the most common font size in that "
220 "document, i.e., the size of the bulk of text in that document. When you "
221 "specify a :guilabel:`Base font size`, calibre automatically rescales all "
222 "font sizes in the document proportionately, so that the most common font "
223 "size becomes the specified base font size and other font sizes are rescaled "
224 "appropriately. By choosing a larger base font size, you can make the fonts "
225 "in the document larger and vice versa. When you set the base font size, for "
226 "best results, you should also set the font size key."
227 msgstr ""
228
229 #: ../../../__w/calibre/calibre/manual/conversion.rst:117
230 msgid ""
231 "Normally, calibre will automatically choose a base font size appropriate to "
232 "the output profile you have chosen (see :ref:`page-setup`). However, you can"
233 " override this here in case the default is not suitable for you."
234 msgstr ""
235
236 #: ../../../__w/calibre/calibre/manual/conversion.rst:121
237 msgid ""
238 "The :guilabel:`Font size key` option lets you control how non-base font "
239 "sizes are rescaled. The font rescaling algorithm works using a font size "
240 "key, which is simply a comma-separated list of font sizes. The font size key"
241 " tells calibre how many \"steps\" bigger or smaller a given font size should"
242 " be compared to the base font size. The idea is that there should be a "
243 "limited number of font sizes in a document. For example, one size for the "
244 "body text, a couple of sizes for different levels of headings and a couple "
245 "of sizes for super/sub scripts and footnotes. The font size key allows "
246 "calibre to compartmentalize the font sizes in the input documents into "
247 "separate \"bins\" corresponding to the different logical font sizes."
248 msgstr "Die :guilabel:`Font size key` option ermöglicht Ihnen einzustellen, wie Schriftgrößen außer der Basisschriftgröße skaliert werden. Der Schriftgrößenskalierungsalgorithmus arbeitet mit einem Schriftgrößenschlüssel, der einfach eine kommagetrennte Liste an Schriftgrößen ist. Der Schriftgrößenschlüssel gibt an, wie viele \"Stufen\" größer oder kleiner als die Basisschriftgröße eine gegebene Schriftgröße sein soll. Die Idee dahinter ist, dass es eine begrenzte Anzahl an Schriftgrößen in einem Dokument geben sollte. Zum Beispiel eine Größe für den Hauptteil, ein paar Größen für verschiedene Stufen an Überschriften und ein paar Größen für Super-/Subskripts und Fußnoten. Der Schriftgrößenschlüssel ermöglicht Callibre die Schriftgrößen aus den Quelldokumenten in verschiedene Kategorien einzuteilen, die den unterschiedlichen logischen Schriftgrößen entsprechen."
249
250 #: ../../../__w/calibre/calibre/manual/conversion.rst:130
251 msgid ""
252 "Let's illustrate with an example. Suppose the source document we are "
253 "converting was produced by someone with excellent eyesight and has a base "
254 "font size of 8pt. That means the bulk of the text in the document is sized "
255 "at 8pts, while headings are somewhat larger (say 10 and 12pt) and footnotes "
256 "somewhat smaller at 6pt. Now if we use the following settings::"
257 msgstr "Lassen Sie uns ein Beispiel geben. Angenommen das Quelldokument, dass wir konvertieren wurde von jemandem mit perfektem Sehvermögen erstellt und hat eine Grund-Schriftgröße von 8pt. Dies bedeutet das der Großteil des Texts im Dokument eine Größe von 8pt hat, während Überschriften etwas größer sind (beispielsweise 10 und 12pt) und Fußnoten etwas kleiner mit 6pt. Wenn wir nun die folgenden Einstellungen verwenden::"
258
259 #: ../../../__w/calibre/calibre/manual/conversion.rst:139
260 msgid ""
261 "The output document will have a base font size of 12pt, headings of 14 and "
262 "16pt and footnotes of 8pt. Now suppose we want to make the largest heading "
263 "size stand out more and make the footnotes a little larger as well. To "
264 "achieve this, the font key should be changed to::"
265 msgstr "Das Zieldokument wird eine Basisschriftgröße von 12pt, Überschriften von 14 und 16pt und Fußnoten von 8pt haben. Nehmen wir an wir möchten die größte Überschriftengröße hervorheben und die Fußnoten auch etwas vergrößern. Um dies zu erreichen sollte der Schriftgrößenschlüssel wie folgt geändert werden::"
266
267 #: ../../../__w/calibre/calibre/manual/conversion.rst:145
268 msgid ""
269 "The largest headings will now become 18pt, while the footnotes will become "
270 "9pt. You can play with these settings to try and figure out what would be "
271 "optimum for you by using the font rescaling wizard, which can be accessed by"
272 " clicking the little button next to the :guilabel:`Font size key` setting."
273 msgstr "Die größten Überschriften werden nun 18pt groß, während die Fußnoten 9pt groß werden. Sie können mit diesen Einstellungen herumspielen um zu versuchen ein Optimum zu finden, indem Sie den Schriftgrößenskalierungsdialog nutzen, auf den über die kleine Schaltfläche neben der :guilabel:`Font size key` Einstellung zugegriffen werden kann."
274
275 #: ../../../__w/calibre/calibre/manual/conversion.rst:150
276 msgid ""
277 "All the font size rescaling in the conversion can also be disabled here, if "
278 "you would like to preserve the font sizes in the input document."
279 msgstr "Die Schriftgrößenskalierung der Konvertierung kann auch deaktiviert werden, falls Sie die Schriftgrößen des Eingabedokuments beibehalten möchten."
280
281 #: ../../../__w/calibre/calibre/manual/conversion.rst:153
282 msgid ""
283 "A related setting is :guilabel:`Line height`. Line height controls the "
284 "vertical height of lines. By default, (a line height of 0), no manipulation "
285 "of line heights is performed. If you specify a non-default value, line "
286 "heights will be set in all locations that don't specify their own line "
287 "heights. However, this is something of a blunt weapon and should be used "
288 "sparingly. If you want to adjust the line heights for some section of the "
289 "input, it's better to use the :ref:`Extra CSS <extra-css>`."
290 msgstr ""
291
292 #: ../../../__w/calibre/calibre/manual/conversion.rst:160
293 msgid ""
294 "In this section you can also tell calibre to embed any referenced fonts into"
295 " the book. This will allow the fonts to work on reader devices even if they "
296 "are not available on the device."
297 msgstr ""
298
299 #: ../../../__w/calibre/calibre/manual/conversion.rst:165
300 msgid "Text"
301 msgstr "Text"
302
303 #: ../../../__w/calibre/calibre/manual/conversion.rst:167
304 msgid ""
305 "Text can be either justified or not. Justified text has extra spaces between"
306 " words to give a smooth right margin. Some people prefer justified text, "
307 "others do not. Normally, calibre will preserve the justification in the "
308 "original document. If you want to override it you can use the "
309 ":guilabel:`Text justification` option in this section."
310 msgstr ""
311
312 #: ../../../__w/calibre/calibre/manual/conversion.rst:173
313 msgid ""
314 "You can also tell calibre to :guilabel:`Smarten punctuation` which will "
315 "replace plain quotes, dashes and ellipses with their typographically correct"
316 " alternatives. Note that this algorithm is not perfect so it is worth "
317 "reviewing the results. The reverse, namely, :guilabel:`Unsmarted "
318 "punctuation` is also available."
319 msgstr ""
320
321 #: ../../../__w/calibre/calibre/manual/conversion.rst:178
322 msgid ""
323 "Finally, there is :guilabel:`Input character encoding`. Older documents "
324 "sometimes don't specify their character encoding. When converted, this can "
325 "result in non-English characters or special characters like smart quotes "
326 "being corrupted. calibre tries to auto-detect the character encoding of the"
327 " source document, but it does not always succeed. You can force it to assume"
328 " a particular character encoding by using this setting. `cp1252` is a "
329 "common encoding for documents produced using Windows software. You should "
330 "also read :ref:`char-encoding-faq` for more on encoding issues."
331 msgstr ""
332
333 #: ../../../__w/calibre/calibre/manual/conversion.rst:188
334 msgid "Layout"
335 msgstr "Layout"
336
337 #: ../../../__w/calibre/calibre/manual/conversion.rst:190
338 msgid ""
339 "Normally, paragraphs in XHTML are rendered with a blank line between them "
340 "and no leading text indent. calibre has a couple of options to control this."
341 " :guilabel:`Remove spacing between paragraphs` forcefully ensure that all "
342 "paragraphs have no inter paragraph spacing. It also sets the text indent to "
343 "1.5em (can be changed) to mark the start of every paragraph. "
344 ":guilabel:`Insert blank line` does the opposite, guaranteeing that there is "
345 "exactly one blank line between each pair of paragraphs. Both these options "
346 "are very comprehensive, removing spacing, or inserting it for *all* "
347 "paragraphs (technically <p> and <div> tags). This is so that you can just "
348 "set the option and be sure that it performs as advertised, irrespective of "
349 "how messy the input file is. The one exception is when the input file uses "
350 "hard line breaks to implement inter-paragraph spacing."
351 msgstr ""
352
353 #: ../../../__w/calibre/calibre/manual/conversion.rst:201
354 msgid ""
355 "If you want to remove the spacing between all paragraphs, except a select "
356 "few, don't use these options. Instead add the following CSS code to "
357 ":ref:`Extra CSS <extra-css>`::"
358 msgstr ""
359
360 #: ../../../__w/calibre/calibre/manual/conversion.rst:207
361 msgid ""
362 "Then, in your source document, mark the paragraphs that need spacing with "
363 "`class=\"spacious\"`. If your input document is not in HTML, use the Debug "
364 "option, described in the Introduction to get HTML (use the :file:`input` "
365 "sub-folder)."
366 msgstr ""
367
368 #: ../../../__w/calibre/calibre/manual/conversion.rst:211
369 msgid ""
370 "Another useful option is :guilabel:`Linearize tables`. Some badly designed "
371 "documents use tables to control the layout of text on the page. When "
372 "converted these documents often have text that runs off the page and other "
373 "artifacts. This option will extract the content from the tables and present "
374 "it in a linear fashion. Note that this option linearizes *all* tables, so "
375 "only use it if you are sure the input document does not use tables for "
376 "legitimate purposes, like presenting tabular information."
377 msgstr ""
378
379 #: ../../../__w/calibre/calibre/manual/conversion.rst:220
380 msgid "Styling"
381 msgstr "Styling"
382
383 #: ../../../__w/calibre/calibre/manual/conversion.rst:224
384 msgid ""
385 "The :guilabel:`Extra CSS` option allows you to specify arbitrary CSS that "
386 "will be applied to all HTML files in the input. This CSS is applied with "
387 "very high priority and so should override most CSS present in the **input "
388 "document** itself. You can use this setting to fine tune the "
389 "presentation/layout of your document. For example, if you want all "
390 "paragraphs of class `endnote` to be right aligned, just add::"
391 msgstr ""
392
393 #: ../../../__w/calibre/calibre/manual/conversion.rst:233
394 msgid "or if you want to change the indentation of all paragraphs::"
395 msgstr ""
396
397 #: ../../../__w/calibre/calibre/manual/conversion.rst:237
398 msgid ""
399 ":guilabel:`Extra CSS` is a very powerful option, but you do need an "
400 "understanding of how CSS works to use it to its full potential. You can use "
401 "the debug pipeline option described above to see what CSS is present in your"
402 " input document."
403 msgstr ""
404
405 #: ../../../__w/calibre/calibre/manual/conversion.rst:241
406 msgid ""
407 "A simpler option is to use :guilabel:`Filter style information`. This allows"
408 " you to remove all CSS properties of the specified types from the document. "
409 "For example, you can use it to remove all colors or fonts."
410 msgstr ""
411
412 #: ../../../__w/calibre/calibre/manual/conversion.rst:246
413 msgid "Transform styles"
414 msgstr "Styles umwandeln"
415
416 #: ../../../__w/calibre/calibre/manual/conversion.rst:248
417 msgid ""
418 "This is the most powerful styling related facility. You can use it to define"
419 " rules that change styles based on various conditions. For example you can "
420 "use it to change all green colors to blue, or remove all bold styling from "
421 "the text or color all headings a certain color, etc."
422 msgstr ""
423
424 #: ../../../__w/calibre/calibre/manual/conversion.rst:254
425 msgid "Transform HTML"
426 msgstr "HTML umwandeln"
427
428 #: ../../../__w/calibre/calibre/manual/conversion.rst:256
429 msgid ""
430 "Similar to transform styles, but allows you to make changes to the HTML "
431 "content of the book. You can replace one tag with another, add classes or "
432 "other attributes to tags based on their content, etc."
433 msgstr ""
434
435 #: ../../../__w/calibre/calibre/manual/conversion.rst:265
436 msgid "Page setup"
437 msgstr "Seiteneinrichtung"
438
439 #: ../../../__w/calibre/calibre/manual/conversion.rst:267
440 msgid ""
441 "The :guilabel:`Page setup` options are for controlling screen layout, like "
442 "margins and screen sizes. There are options to setup page margins, which "
443 "will be used by the output plugin, if the selected output format supports "
444 "page margins. In addition, you should choose an Input profile and an output "
445 "profile. Both sets of profiles basically deal with how to interpret "
446 "measurements in the input/output documents, screen sizes and default font "
447 "rescaling keys."
448 msgstr ""
449
450 #: ../../../__w/calibre/calibre/manual/conversion.rst:274
451 msgid ""
452 "If you know that the file you are converting was intended to be used on a "
453 "particular device/software platform, choose the corresponding input profile,"
454 " otherwise just choose the default input profile. If you know the files you "
455 "are producing are meant for a particular device type, choose the "
456 "corresponding output profile. Otherwise, choose one of the Generic output "
457 "profiles. If you are converting to MOBI or AZW3 then you will almost always "
458 "want to choose one of the Kindle output profiles. Otherwise, your best bet "
459 "for modern E-book reading devices is to choose the :guilabel:`Generic e-ink "
460 "HD` output profile."
461 msgstr ""
462
463 #: ../../../__w/calibre/calibre/manual/conversion.rst:283
464 msgid ""
465 "The output profile also controls the screen size. This will cause, for "
466 "example, images to be auto-resized to be fit to the screen in some output "
467 "formats. So choose a profile of a device that has a screen size similar to "
468 "your device."
469 msgstr ""
470
471 #: ../../../__w/calibre/calibre/manual/conversion.rst:291
472 msgid "Heuristic processing"
473 msgstr "Heuristische Verarbeitung"
474
475 #: ../../../__w/calibre/calibre/manual/conversion.rst:293
476 msgid ""
477 "Heuristic processing provides a variety of functions which can be used to "
478 "try and detect and correct common problems in poorly formatted input "
479 "documents. Use these functions if your input document suffers from poor "
480 "formatting. Because these functions rely on common patterns, be aware that "
481 "in some cases an option may lead to worse results, so use with care. As an "
482 "example, several of these options will remove all non-breaking-space "
483 "entities, or may include false positive matches relating to the function."
484 msgstr ""
485
486 #: ../../../__w/calibre/calibre/manual/conversion.rst:299
487 msgid ":guilabel:`Enable heuristic processing`"
488 msgstr ""
489
490 #: ../../../__w/calibre/calibre/manual/conversion.rst:300
491 msgid ""
492 "This option activates calibre's :guilabel:`Heuristic processing` stage of "
493 "the conversion pipeline. This must be enabled in order for various sub-"
494 "functions to be applied"
495 msgstr ""
496
497 #: ../../../__w/calibre/calibre/manual/conversion.rst:303
498 msgid ":guilabel:`Unwrap lines`"
499 msgstr ""
500
501 #: ../../../__w/calibre/calibre/manual/conversion.rst:304
502 msgid ""
503 "Enabling this option will cause calibre to attempt to detect and correct "
504 "hard line breaks that exist within a document using punctuation clues and "
505 "line length. calibre will first attempt to detect whether hard line breaks "
506 "exist, if they do not appear to exist calibre will not attempt to unwrap "
507 "lines. The line-unwrap factor can be reduced if you want to 'force' calibre "
508 "to unwrap lines."
509 msgstr ""
510
511 #: ../../../__w/calibre/calibre/manual/conversion.rst:309
512 msgid ":guilabel:`Line-unwrap factor`"
513 msgstr ""
514
515 #: ../../../__w/calibre/calibre/manual/conversion.rst:310
516 msgid ""
517 "This option controls the algorithm calibre uses to remove hard line breaks. "
518 "For example, if the value of this option is 0.4, that means calibre will "
519 "remove hard line breaks from the end of lines whose lengths are less than "
520 "the length of 40% of all lines in the document. If your document only has a "
521 "few line breaks which need correction, then this value should be reduced to "
522 "somewhere between 0.1 and 0.2."
523 msgstr ""
524
525 #: ../../../__w/calibre/calibre/manual/conversion.rst:315
526 msgid ""
527 ":guilabel:`Detect and markup unformatted chapter headings and sub headings`"
528 msgstr ""
529
530 #: ../../../__w/calibre/calibre/manual/conversion.rst:316
531 msgid ""
532 "If your document does not have chapter headings and titles formatted "
533 "differently from the rest of the text, calibre can use this option to "
534 "attempt to detect them and surround them with heading tags. <h2> tags are "
535 "used for chapter headings; <h3> tags are used for any titles that are "
536 "detected."
537 msgstr ""
538
539 #: ../../../__w/calibre/calibre/manual/conversion.rst:320
540 msgid ""
541 "This function will not create a TOC, but in many cases it will cause "
542 "calibre's default chapter detection settings to correctly detect chapters "
543 "and build a TOC. Adjust the XPath under Structure detection if a TOC is not"
544 " automatically created. If there are no other headings used in the document"
545 " then setting \"//h:h2\" under Structure detection would be the easiest way "
546 "to create a TOC for the document."
547 msgstr ""
548
549 #: ../../../__w/calibre/calibre/manual/conversion.rst:325
550 msgid ""
551 "The inserted headings are not formatted, to apply formatting use the "
552 ":guilabel:`Extra CSS` option under the Look and Feel conversion settings. "
553 "For example, to center heading tags, use the following::"
554 msgstr ""
555
556 #: ../../../__w/calibre/calibre/manual/conversion.rst:330
557 msgid ":guilabel:`Renumber sequences of <h1> or <h2> tags`"
558 msgstr ""
559
560 #: ../../../__w/calibre/calibre/manual/conversion.rst:331
561 msgid ""
562 "Some publishers format chapter headings using multiple <h1> or <h2> tags "
563 "sequentially. calibre's default conversion settings will cause such titles "
564 "to be split into two pieces. This option will re-number the heading tags to"
565 " prevent splitting."
566 msgstr ""
567
568 #: ../../../__w/calibre/calibre/manual/conversion.rst:335
569 msgid ":guilabel:`Delete blank lines between paragraphs`"
570 msgstr ""
571
572 #: ../../../__w/calibre/calibre/manual/conversion.rst:336
573 msgid ""
574 "This option will cause calibre to analyze blank lines included within the "
575 "document. If every paragraph is interleaved with a blank line, then calibre"
576 " will remove all those blank paragraphs. Sequences of multiple blank lines "
577 "will be considered scene breaks and retained as a single paragraph. This "
578 "option differs from the :guilabel:`Remove paragraph spacing` option under "
579 ":guilabel:`Look and Feel` in that it actually modifies the HTML content, "
580 "while the other option modifies the document styles. This option can also "
581 "remove paragraphs which were inserted using calibre's :guilabel:`Insert "
582 "blank line` option."
583 msgstr ""
584
585 #: ../../../__w/calibre/calibre/manual/conversion.rst:346
586 msgid ":guilabel:`Ensure scene breaks are consistently formatted`"
587 msgstr ""
588
589 #: ../../../__w/calibre/calibre/manual/conversion.rst:347
590 msgid ""
591 "With this option calibre will attempt to detect common scene-break markers "
592 "and ensure that they are center aligned. 'Soft' scene break markers, i.e. "
593 "scene breaks only defined by extra white space, are styled to ensure that "
594 "they will not be displayed in conjunction with page breaks."
595 msgstr ""
596
597 #: ../../../__w/calibre/calibre/manual/conversion.rst:351
598 msgid ":guilabel:`Replace scene breaks`"
599 msgstr ""
600
601 #: ../../../__w/calibre/calibre/manual/conversion.rst:352
602 msgid ""
603 "If this option is configured then calibre will replace scene break markers "
604 "it finds with the replacement text specified by the user. Please note that "
605 "some ornamental characters may not be supported across all reading devices."
606 msgstr ""
607
608 #: ../../../__w/calibre/calibre/manual/conversion.rst:355
609 msgid ""
610 "In general you should avoid using HTML tags, calibre will discard any tags "
611 "and use pre-defined markup. <hr /> tags, i.e. horizontal rules, and <img> "
612 "tags are exceptions. Horizontal rules can optionally be specified with "
613 "styles, if you choose to add your own style be sure to include the 'width' "
614 "setting, otherwise the style information will be discarded. Image tags can "
615 "used, but calibre does not provide the ability to add the image during "
616 "conversion, this must be done after the fact using the 'Edit book' feature."
617 msgstr ""
618
619 #: ../../../__w/calibre/calibre/manual/conversion.rst:361
620 msgid ""
621 "Example image tag (place the image within an 'Images' folder inside the EPUB"
622 " after conversion):"
623 msgstr ""
624
625 #: ../../../__w/calibre/calibre/manual/conversion.rst:362
626 msgid "<img style=\"width:10%\" src=\"../Images/scenebreak.png\" />"
627 msgstr "<img style=\"width:10%\" src=\"../Images/scenebreak.png\" />"
628
629 #: ../../../__w/calibre/calibre/manual/conversion.rst:364
630 msgid "Example horizontal rule with styles:"
631 msgstr ""
632
633 #: ../../../__w/calibre/calibre/manual/conversion.rst:365
634 msgid ""
635 "<hr style=\"width:20%;padding-top: 1px;border-top: 2px ridge black;border-"
636 "bottom: 2px groove black;\"/>"
637 msgstr "<hr style=\"width:20%;padding-top: 1px;border-top: 2px ridge black;border-bottom: 2px groove black;\"/>"
638
639 #: ../../../__w/calibre/calibre/manual/conversion.rst:367
640 msgid ":guilabel:`Remove unnecessary hyphens`"
641 msgstr ""
642
643 #: ../../../__w/calibre/calibre/manual/conversion.rst:368
644 msgid ""
645 "calibre will analyze all hyphenated content in the document when this option"
646 " is enabled. The document itself is used as a dictionary for analysis. "
647 "This allows calibre to accurately remove hyphens for any words in the "
648 "document in any language, along with made-up and obscure scientific words. "
649 "The primary drawback is words appearing only a single time in the document "
650 "will not be changed. Analysis happens in two passes, the first pass "
651 "analyzes line endings. Lines are only unwrapped if the word exists with or "
652 "without a hyphen in the document. The second pass analyzes all hyphenated "
653 "words throughout the document, hyphens are removed if the word exists "
654 "elsewhere in the document without a match."
655 msgstr ""
656
657 #: ../../../__w/calibre/calibre/manual/conversion.rst:375
658 msgid ":guilabel:`Italicize common words and patterns`"
659 msgstr ""
660
661 #: ../../../__w/calibre/calibre/manual/conversion.rst:376
662 msgid ""
663 "When enabled, calibre will look for common words and patterns that denote "
664 "italics and italicize them. Examples are common text conventions such as "
665 "~word~ or phrases that should generally be italicized, e.g. latin phrases "
666 "like 'etc.' or 'et cetera'."
667 msgstr ""
668
669 #: ../../../__w/calibre/calibre/manual/conversion.rst:379
670 msgid ":guilabel:`Replace entity indents with CSS indents`"
671 msgstr ""
672
673 #: ../../../__w/calibre/calibre/manual/conversion.rst:380
674 msgid ""
675 "Some documents use a convention of defining text indents using non-breaking "
676 "space entities. When this option is enabled calibre will attempt to detect "
677 "this sort of formatting and convert them to a 3% text indent using CSS."
678 msgstr ""
679
680 #: ../../../__w/calibre/calibre/manual/conversion.rst:386
681 msgid "Search & replace"
682 msgstr "Suchen & Ersetzen"
683
684 #: ../../../__w/calibre/calibre/manual/conversion.rst:388
685 msgid ""
686 "These options are useful primarily for conversion of PDF documents or OCR "
687 "conversions, though they can also be used to fix many document specific "
688 "problems. As an example, some conversions can leave behind page headers and "
689 "footers in the text. These options use regular expressions to try and detect"
690 " headers, footers, or other arbitrary text and remove or replace them. "
691 "Remember that they operate on the intermediate XHTML produced by the "
692 "conversion pipeline. There is a wizard to help you customize the regular "
693 "expressions for your document. Click the magic wand beside the expression "
694 "box, and click the 'Test' button after composing your search expression. "
695 "Successful matches will be highlighted in Yellow."
696 msgstr ""
697
698 #: ../../../__w/calibre/calibre/manual/conversion.rst:396
699 msgid ""
700 "The search works by using a Python regular expression. All matched text is "
701 "simply removed from the document or replaced using the replacement pattern. "
702 "The replacement pattern is optional, if left blank then text matching the "
703 "search pattern will be deleted from the document. You can learn more about "
704 "regular expressions and their syntax at :ref:`regexptutorial`."
705 msgstr ""
706
707 #: ../../../__w/calibre/calibre/manual/conversion.rst:404
708 msgid "Structure detection"
709 msgstr "Struktur-Erkennung"
710
711 #: ../../../__w/calibre/calibre/manual/conversion.rst:406
712 msgid ""
713 "Structure detection involves calibre trying its best to detect structural "
714 "elements in the input document, when they are not properly specified. For "
715 "example, chapters, page breaks, headers, footers, etc. As you can imagine, "
716 "this process varies widely from book to book. Fortunately, calibre has very "
717 "powerful options to control this. With power comes complexity, but if once "
718 "you take the time to learn the complexity, you will find it well worth the "
719 "effort."
720 msgstr ""
721
722 #: ../../../__w/calibre/calibre/manual/conversion.rst:412
723 msgid "Chapters and page breaks"
724 msgstr "Kapitel und Seitenumbrüche"
725
726 #: ../../../__w/calibre/calibre/manual/conversion.rst:414
727 msgid ""
728 "calibre has two sets of options for :guilabel:`chapter detection` and "
729 ":guilabel:`inserting page breaks`. This can sometimes be slightly confusing,"
730 " as by default, calibre will insert page breaks before detected chapters as "
731 "well as the locations detected by the page breaks option. The reason for "
732 "this is that there are often locations where page breaks should be inserted "
733 "that are not chapter boundaries. Also, detected chapters can be optionally "
734 "inserted into the auto generated Table of Contents."
735 msgstr ""
736
737 #: ../../../__w/calibre/calibre/manual/conversion.rst:419
738 msgid ""
739 "calibre uses *XPath*, a powerful language to allow the user to specify "
740 "chapter boundaries/page breaks. XPath can seem a little daunting to use at "
741 "first, fortunately, there is a :ref:`XPath tutorial <xpath-tutorial>` in the"
742 " User Manual. Remember that Structure detection operates on the intermediate"
743 " XHTML produced by the conversion pipeline. Use the debug option described "
744 "in the :ref:`conversion-introduction` to figure out the appropriate settings"
745 " for your book. There is also a button for a XPath wizard to help with the "
746 "generation of simple XPath expressions."
747 msgstr ""
748
749 #: ../../../__w/calibre/calibre/manual/conversion.rst:425
750 msgid ""
751 "By default, calibre uses the following expression for detecting chapters::"
752 msgstr ""
753
754 #: ../../../__w/calibre/calibre/manual/conversion.rst:429
755 msgid ""
756 "This expression is rather complex, because it tries to handle a number of "
757 "common cases simultaneously. What it means is that calibre will assume "
758 "chapters start at either `<h1>` or `<h2>` tags that have any of the words "
759 "`(chapter, book, section or part)` in them or that have the "
760 "`class=\"chapter\"` attribute."
761 msgstr ""
762
763 #: ../../../__w/calibre/calibre/manual/conversion.rst:433
764 msgid ""
765 "A related option is :guilabel:`Chapter mark`, which allows you to control "
766 "what calibre does when it detects a chapter. By default, it will insert a "
767 "page break before the chapter. You can have it insert a ruled line instead "
768 "of, or in addition to the page break. You can also have it do nothing."
769 msgstr ""
770
771 #: ../../../__w/calibre/calibre/manual/conversion.rst:437
772 msgid "The default setting for detecting page breaks is::"
773 msgstr "Die Standardeinstellung zur Erkennung von Seitenumbrüchen ist:"
774
775 #: ../../../__w/calibre/calibre/manual/conversion.rst:441
776 msgid ""
777 "which means that calibre will insert page breaks before every `<h1>` and "
778 "`<h2>` tag by default."
779 msgstr ""
780
781 #: ../../../__w/calibre/calibre/manual/conversion.rst:445
782 msgid ""
783 "The default expressions may change depending on the input format you are "
784 "converting."
785 msgstr ""
786
787 #: ../../../__w/calibre/calibre/manual/conversion.rst:448
788 msgid "Miscellaneous"
789 msgstr "Verschiedenes"
790
791 #: ../../../__w/calibre/calibre/manual/conversion.rst:450
792 msgid "There are a few more options in this section."
793 msgstr "In dieser Sektion gibt es noch einige weitere Optionen."
794
795 #: ../../../__w/calibre/calibre/manual/conversion.rst:452
796 msgid ":guilabel:`Insert metadata as page at start of book`"
797 msgstr ""
798
799 #: ../../../__w/calibre/calibre/manual/conversion.rst:453
800 msgid ""
801 "One of the great things about calibre is that it allows you to maintain very"
802 " complete metadata about all of your books, for example, a rating, tags, "
803 "comments, etc. This option will create a single page with all this metadata "
804 "and insert it into the converted e-book, typically just after the cover. "
805 "Think of it as a way to create your own customised book jacket."
806 msgstr ""
807
808 #: ../../../__w/calibre/calibre/manual/conversion.rst:458
809 msgid ":guilabel:`Remove first image`"
810 msgstr ":guilabel:`Erstes Bild entfernen`"
811
812 #: ../../../__w/calibre/calibre/manual/conversion.rst:459
813 msgid ""
814 "Sometimes, the source document you are converting includes the cover as part"
815 " of the book, instead of as a separate cover. If you also specify a cover in"
816 " calibre, then the converted book will have two covers. This option will "
817 "simply remove the first image from the source document, thereby ensuring "
818 "that the converted book has only one cover, the one specified in calibre."
819 msgstr "Manche Quelldateien, die Sie konvertieren, enthalten das Titelbild als Teil des Buches, anstatt als separates Bild. Falls Sie ein weiteres Titelbild in Calibre angeben, hat das konvertierte Buch zwei Titelbilder. Diese Option entfernt einfach das erste Bild des Quelldokuments und stellt auf diese Weise sicher, dass das konvertierte Buch nur ein einziges Titelbild hat, und zwar das welches in Calibre angegeben wurde."
820
821 #: ../../../__w/calibre/calibre/manual/conversion.rst:466
822 msgid "Table of Contents"
823 msgstr "Inhaltsverzeichnis"
824
825 #: ../../../__w/calibre/calibre/manual/conversion.rst:468
826 msgid ""
827 "When the input document has a Table of Contents in its metadata, calibre "
828 "will just use that. However, a number of older formats either do not support"
829 " a metadata based Table of Contents, or individual documents do not have "
830 "one. In these cases, the options in this section can help you automatically "
831 "generate a Table of Contents in the converted e-book, based on the actual "
832 "content in the input document."
833 msgstr ""
834
835 #: ../../../__w/calibre/calibre/manual/conversion.rst:473
836 msgid ""
837 "Using these options can be a little challenging to get exactly right. If you"
838 " prefer creating/editing the Table of Contents by hand, convert to the EPUB "
839 "or AZW3 formats and select the checkbox at the bottom of the Table of "
840 "Contents section of the conversion dialog that says :guilabel:`Manually "
841 "fine-tune the Table of Contents after conversion`. This will launch the ToC "
842 "Editor tool after the conversion. It allows you to create entries in the "
843 "Table of Contents by simply clicking the place in the book where you want "
844 "the entry to point. You can also use the ToC Editor by itself, without doing"
845 " a conversion. Go to :guilabel:`Preferences->Interface->Toolbars` and add "
846 "the :guilabel:`ToC Editor` to the main toolbar. Then just select the book "
847 "you want to edit and click the :guilabel:`ToC Editor` button."
848 msgstr ""
849
850 #: ../../../__w/calibre/calibre/manual/conversion.rst:485
851 msgid ""
852 "The first option is :guilabel:`Force use of auto-generated Table of "
853 "Contents`. By checking this option you can have calibre override any Table "
854 "of Contents found in the metadata of the input document with the auto "
855 "generated one."
856 msgstr ""
857
858 #: ../../../__w/calibre/calibre/manual/conversion.rst:489
859 msgid ""
860 "The default way that the creation of the auto generated Table of Contents "
861 "works is that, calibre will first try to add any detected chapters to the "
862 "generated table of contents. You can learn how to customize the detection of"
863 " chapters in the :ref:`structure-detection` section above. If you do not "
864 "want to include detected chapters in the generated table of contents, check "
865 "the :guilabel:`Do not add detected chapters` option."
866 msgstr ""
867
868 #: ../../../__w/calibre/calibre/manual/conversion.rst:494
869 msgid ""
870 "If less than the :guilabel:`Chapter threshold` number of chapters were "
871 "detected, calibre will then add any hyperlinks it finds in the input "
872 "document to the Table of Contents. This often works well: many input "
873 "documents include a hyperlinked Table of Contents right at the start. The "
874 ":guilabel:`Number of links` option can be used to control this behavior. If "
875 "set to zero, no links are added. If set to a number greater than zero, at "
876 "most that number of links is added."
877 msgstr ""
878
879 #: ../../../__w/calibre/calibre/manual/conversion.rst:500
880 msgid ""
881 "calibre will automatically filter duplicates from the generated Table of "
882 "Contents. However, if there are some additional undesirable entries, you can"
883 " filter them using the :guilabel:`TOC Filter` option. This is a regular "
884 "expression that will match the title of entries in the generated table of "
885 "contents. Whenever a match is found, it will be removed. For example, to "
886 "remove all entries titles \"Next\" or \"Previous\" use::"
887 msgstr ""
888
889 #: ../../../__w/calibre/calibre/manual/conversion.rst:507
890 msgid ""
891 "The :guilabel:`Level 1,2,3 TOC` options allow you to create a sophisticated "
892 "multi-level Table of Contents. They are XPath expressions that match tags in"
893 " the intermediate XHTML produced by the conversion pipeline. See the "
894 ":ref:`conversion-introduction` for how to get access to this XHTML. Also "
895 "read the :ref:`xpath-tutorial`, to learn how to construct XPath expressions."
896 " Next to each option is a button that launches a wizard to help with the "
897 "creation of basic XPath expressions. The following simple example "
898 "illustrates how to use these options."
899 msgstr ""
900
901 #: ../../../__w/calibre/calibre/manual/conversion.rst:513
902 msgid ""
903 "Suppose you have an input document that results in XHTML that looks like "
904 "this:"
905 msgstr ""
906
907 #: ../../../__w/calibre/calibre/manual/conversion.rst:535
908 msgid "Then, we set the options as::"
909 msgstr ""
910
911 #: ../../../__w/calibre/calibre/manual/conversion.rst:540
912 msgid ""
913 "This will result in an automatically generated two level Table of Contents "
914 "that looks like::"
915 msgstr ""
916
917 #: ../../../__w/calibre/calibre/manual/conversion.rst:551
918 msgid ""
919 "Not all output formats support a multi level Table of Contents. You should "
920 "first try with EPUB output. If that works, then try your format of choice."
921 msgstr ""
922
923 #: ../../../__w/calibre/calibre/manual/conversion.rst:555
924 msgid "Using images as chapter titles when converting HTML input documents"
925 msgstr "Verwenden von Bildern als Kapitelüberschriften beim Konvertieren von HTML-Quelldokumenten"
926
927 #: ../../../__w/calibre/calibre/manual/conversion.rst:557
928 msgid ""
929 "Suppose you want to use an image as your chapter title, but still want "
930 "calibre to be able to automatically generate a Table of Contents for you "
931 "from the chapter titles. Use the following HTML markup to achieve this:"
932 msgstr ""
933
934 #: ../../../__w/calibre/calibre/manual/conversion.rst:571
935 msgid ""
936 "Set the :guilabel:`Level 1 TOC` setting to ``//h:h2``. Then, for chapter "
937 "two, calibre will take the title from the value of the ``title`` attribute "
938 "on the ``<h2>`` tag, since the tag has no text."
939 msgstr ""
940
941 #: ../../../__w/calibre/calibre/manual/conversion.rst:574
942 msgid ""
943 "Using tag attributes to supply the text for entries in the Table of Contents"
944 msgstr "Verwenden von Tag-Attributen als Text für Inhaltsverzeichniseinträge"
945
946 #: ../../../__w/calibre/calibre/manual/conversion.rst:576
947 msgid ""
948 "If you have particularly long chapter titles and want shortened versions in "
949 "the Table of Contents, you can use the title attribute to achieve this, for "
950 "example:"
951 msgstr ""
952
953 #: ../../../__w/calibre/calibre/manual/conversion.rst:591
954 msgid ""
955 "Set the :guilabel:`Level 1 TOC` setting to ``//h:h2/@title``. Then calibre "
956 "will take the title from the value of the ``title`` attribute on the "
957 "``<h2>`` tags, instead of using the text inside the tag. Note the trailing "
958 "``/@title`` on the XPath expression, you can use this form to tell calibre "
959 "to get the text from any attribute you like."
960 msgstr ""
961
962 #: ../../../__w/calibre/calibre/manual/conversion.rst:598
963 msgid "How options are set/saved for conversion"
964 msgstr ""
965
966 #: ../../../__w/calibre/calibre/manual/conversion.rst:600
967 msgid ""
968 "There are two places where conversion options can be set in calibre. The "
969 "first is in Preferences->Conversion. These settings are the defaults for the"
970 " conversion options. Whenever you try to convert a new book, the settings "
971 "set here will be used by default."
972 msgstr ""
973
974 #: ../../../__w/calibre/calibre/manual/conversion.rst:605
975 msgid ""
976 "You can also change settings in the conversion dialog for each book "
977 "conversion. When you convert a book, calibre remembers the settings you used"
978 " for that book, so that if you convert it again, the saved settings for the "
979 "individual book will take precedence over the defaults set in "
980 ":guilabel:`Preferences`. You can restore the individual settings to defaults"
981 " by using the :guilabel:`Restore defaults` button in the individual book "
982 "conversion dialog. You can remove the saved settings for a group of books by"
983 " selecting all the books and then clicking the :guilabel:`Edit metadata` "
984 "button to bring up the bulk metadata edit dialog, near the bottom of the "
985 "dialog is an option to remove stored conversion settings."
986 msgstr ""
987
988 #: ../../../__w/calibre/calibre/manual/conversion.rst:616
989 msgid ""
990 "When you bulk convert a set of books, settings are taken in the following "
991 "order (last one wins):"
992 msgstr ""
993
994 #: ../../../__w/calibre/calibre/manual/conversion.rst:618
995 msgid "From the defaults set in Preferences->Conversion"
996 msgstr ""
997
998 #: ../../../__w/calibre/calibre/manual/conversion.rst:620
999 msgid ""
1000 "From the saved conversion settings for each book being converted (if any). "
1001 "This can be turned off by the option in the top left corner of the Bulk "
1002 "conversion dialog."
1003 msgstr ""
1004
1005 #: ../../../__w/calibre/calibre/manual/conversion.rst:624
1006 msgid "From the settings set in the Bulk conversion dialog"
1007 msgstr ""
1008
1009 #: ../../../__w/calibre/calibre/manual/conversion.rst:626
1010 msgid ""
1011 "Note that the final settings for each book in a Bulk conversion will be "
1012 "saved and re-used if the book is converted again. Since the highest priority"
1013 " in Bulk Conversion is given to the settings in the Bulk conversion dialog, "
1014 "these will override any book specific settings. So you should only bulk "
1015 "convert books together that need similar settings. The exceptions are "
1016 "metadata and input format specific settings. Since the Bulk conversion "
1017 "dialog does not have settings for these two categories, they will be taken "
1018 "from book specific settings (if any) or the defaults."
1019 msgstr ""
1020
1021 #: ../../../__w/calibre/calibre/manual/conversion.rst:637
1022 msgid ""
1023 "You can see the actual settings used during any conversion by clicking the "
1024 "rotating icon in the lower right corner and then double clicking the "
1025 "individual conversion job. This will bring up a conversion log that will "
1026 "contain the actual settings used, near the top."
1027 msgstr ""
1028
1029 #: ../../../__w/calibre/calibre/manual/conversion.rst:642
1030 msgid "Format specific tips"
1031 msgstr "Formatspezifische Tipps"
1032
1033 #: ../../../__w/calibre/calibre/manual/conversion.rst:644
1034 msgid ""
1035 "Here you will find tips specific to the conversion of particular formats. "
1036 "Options specific to particular format, whether input or output are available"
1037 " in the conversion dialog under their own section, for example `TXT input` "
1038 "or `EPUB output`."
1039 msgstr ""
1040
1041 #: ../../../__w/calibre/calibre/manual/conversion.rst:649
1042 msgid "Convert Microsoft Word documents"
1043 msgstr "Microsoft Word-Dokumente konvertieren"
1044
1045 #: ../../../__w/calibre/calibre/manual/conversion.rst:651
1046 msgid ""
1047 "calibre can automatically convert ``.docx`` files created by Microsoft Word "
1048 "2007 and newer. Just add the file to calibre and click convert."
1049 msgstr ""
1050
1051 #: ../../../__w/calibre/calibre/manual/conversion.rst:655
1052 msgid ""
1053 "There is a :download_file:`demo .docx file <demos/demo.docx>` that "
1054 "demonstrates the capabilities of the calibre conversion engine. Just "
1055 "download it and convert it to EPUB or AZW3 to see what calibre can do."
1056 msgstr ""
1057
1058 #: ../../../__w/calibre/calibre/manual/conversion.rst:659
1059 msgid ""
1060 "calibre will automatically generate a Table of Contents based on headings if"
1061 " you mark your headings with the ``Heading 1``, ``Heading 2``, etc. styles "
1062 "in Microsoft Word. Open the output e-book in the calibre E-book viewer and "
1063 "click the :guilabel:`Table of Contents` button to view the generated Table "
1064 "of Contents."
1065 msgstr ""
1066
1067 #: ../../../__w/calibre/calibre/manual/conversion.rst:665
1068 msgid "Older .doc files"
1069 msgstr "Ältere .doc-Dateien"
1070
1071 #: ../../../__w/calibre/calibre/manual/conversion.rst:667
1072 msgid ""
1073 "For older .doc files, you can save the document as HTML with Microsoft Word "
1074 "and then convert the resulting HTML file with calibre. When saving as HTML, "
1075 "be sure to use the \"Save as Web Page, Filtered\" option as this will "
1076 "produce clean HTML that will convert well. Note that Word produces really "
1077 "messy HTML, converting it can take a long time, so be patient. If you have a"
1078 " newer version of Word available, you can directly save it as .docx as well."
1079 msgstr ""
1080
1081 #: ../../../__w/calibre/calibre/manual/conversion.rst:674
1082 msgid ""
1083 "Another alternative is to use the free LibreOffice. Open your .doc file in "
1084 "LibreOffice and save it as .docx, which can be directly converted in "
1085 "calibre."
1086 msgstr ""
1087
1088 #: ../../../__w/calibre/calibre/manual/conversion.rst:678
1089 msgid "Convert TXT documents"
1090 msgstr "TXT-Dokumente konvertieren"
1091
1092 #: ../../../__w/calibre/calibre/manual/conversion.rst:680
1093 msgid ""
1094 "TXT documents have no well defined way to specify formatting like bold, "
1095 "italics, etc, or document structure like paragraphs, headings, sections and "
1096 "so on, but there are a variety of conventions commonly used. By default "
1097 "calibre attempts automatic detection of the correct formatting and markup "
1098 "based on those conventions."
1099 msgstr ""
1100
1101 #: ../../../__w/calibre/calibre/manual/conversion.rst:685
1102 msgid ""
1103 "TXT input supports a number of options to differentiate how paragraphs are "
1104 "detected."
1105 msgstr ""
1106
1107 #: ../../../__w/calibre/calibre/manual/conversion.rst:687
1108 msgid ":guilabel:`Paragraph style: Auto`"
1109 msgstr ""
1110
1111 #: ../../../__w/calibre/calibre/manual/conversion.rst:688
1112 msgid ""
1113 "Analyzes the text file and attempts to automatically determine how "
1114 "paragraphs are defined. This option will generally work fine, if you "
1115 "achieve undesirable results try one of the manual options."
1116 msgstr ""
1117
1118 #: ../../../__w/calibre/calibre/manual/conversion.rst:691
1119 msgid ":guilabel:`Paragraph style: Block`"
1120 msgstr ""
1121
1122 #: ../../../__w/calibre/calibre/manual/conversion.rst:692
1123 msgid "Assumes one or more blank lines are a paragraph boundary::"
1124 msgstr ""
1125
1126 #: ../../../__w/calibre/calibre/manual/conversion.rst:699
1127 msgid ":guilabel:`Paragraph style: Single`"
1128 msgstr ""
1129
1130 #: ../../../__w/calibre/calibre/manual/conversion.rst:700
1131 msgid "Assumes that every line is a paragraph::"
1132 msgstr "Nimmt an, dass jede Zeile ein Absatz ist::"
1133
1134 #: ../../../__w/calibre/calibre/manual/conversion.rst:706
1135 msgid ":guilabel:`Paragraph style: Print`"
1136 msgstr ""
1137
1138 #: ../../../__w/calibre/calibre/manual/conversion.rst:707
1139 msgid ""
1140 "Assumes that every paragraph starts with an indent (either a tab or 2+ "
1141 "spaces). Paragraphs end when the next line that starts with an indent is "
1142 "reached::"
1143 msgstr ""
1144
1145 #: ../../../__w/calibre/calibre/manual/conversion.rst:717
1146 msgid ":guilabel:`Paragraph style: Unformatted`"
1147 msgstr ""
1148
1149 #: ../../../__w/calibre/calibre/manual/conversion.rst:718
1150 msgid ""
1151 "Assumes that the document has no formatting, but does use hard line breaks."
1152 " Punctuation and median line length are used to attempt to re-create "
1153 "paragraphs."
1154 msgstr ""
1155
1156 #: ../../../__w/calibre/calibre/manual/conversion.rst:721
1157 msgid ":guilabel:`Formatting style: Auto`"
1158 msgstr ""
1159
1160 #: ../../../__w/calibre/calibre/manual/conversion.rst:722
1161 msgid ""
1162 "Attempts to detect the type of formatting markup being used. If no markup "
1163 "is used then heuristic formatting will be applied."
1164 msgstr ""
1165
1166 #: ../../../__w/calibre/calibre/manual/conversion.rst:725
1167 msgid ":guilabel:`Formatting style: Heuristic`"
1168 msgstr ""
1169
1170 #: ../../../__w/calibre/calibre/manual/conversion.rst:726
1171 msgid ""
1172 "Analyzes the document for common chapter headings, scene breaks, and "
1173 "italicized words and applies the appropriate HTML markup during conversion."
1174 msgstr ""
1175
1176 #: ../../../__w/calibre/calibre/manual/conversion.rst:729
1177 msgid ":guilabel:`Formatting style: Markdown`"
1178 msgstr ""
1179
1180 #: ../../../__w/calibre/calibre/manual/conversion.rst:730
1181 msgid ""
1182 "calibre also supports running TXT input though a transformation preprocessor"
1183 " known as Markdown. Markdown allows for basic formatting to be added to TXT "
1184 "documents, such as bold, italics, section headings, tables, lists, a Table "
1185 "of Contents, etc. Marking chapter headings with a leading # and setting the "
1186 "chapter XPath detection expression to \"//h:h1\" is the easiest way to have "
1187 "a proper table of contents generated from a TXT document. You can learn more"
1188 " about the Markdown syntax at `daringfireball "
1189 "<https://daringfireball.net/projects/markdown/syntax>`_."
1190 msgstr ""
1191
1192 #: ../../../__w/calibre/calibre/manual/conversion.rst:736
1193 msgid ":guilabel:`Formatting style: None`"
1194 msgstr ""
1195
1196 #: ../../../__w/calibre/calibre/manual/conversion.rst:737
1197 msgid ""
1198 "Applies no special formatting to the text, the document is converted to HTML"
1199 " with no other changes."
1200 msgstr ""
1201
1202 #: ../../../__w/calibre/calibre/manual/conversion.rst:742
1203 msgid "Convert PDF documents"
1204 msgstr "PDF-Dokumente konvertieren"
1205
1206 #: ../../../__w/calibre/calibre/manual/conversion.rst:744
1207 msgid ""
1208 "PDF documents are one of the worst formats to convert from. They are a fixed"
1209 " page size and text placement format. Meaning, it is very difficult to "
1210 "determine where one paragraph ends and another begins. calibre will try to "
1211 "unwrap paragraphs using a configurable, :guilabel:`Line un-wrapping factor`."
1212 " This is a scale used to determine the length at which a line should be "
1213 "unwrapped. Valid values are a decimal between 0 and 1. The default is 0.45, "
1214 "just under the median line length. Lower this value to include more text in "
1215 "the unwrapping. Increase to include less. You can adjust this value in the "
1216 "conversion settings under :guilabel:`PDF Input`."
1217 msgstr ""
1218
1219 #: ../../../__w/calibre/calibre/manual/conversion.rst:751
1220 msgid ""
1221 "Also, they often have headers and footers as part of the document that will "
1222 "become included with the text. Use the :guilabel:`Search and replace` panel "
1223 "to remove headers and footers to mitigate this issue. If the headers and "
1224 "footers are not removed from the text it can throw off the paragraph "
1225 "unwrapping. To learn how to use the header and footer removal options, read "
1226 ":ref:`regexptutorial`."
1227 msgstr ""
1228
1229 #: ../../../__w/calibre/calibre/manual/conversion.rst:756
1230 msgid "Some limitations of PDF input are:"
1231 msgstr ""
1232
1233 #: ../../../__w/calibre/calibre/manual/conversion.rst:758
1234 msgid "Complex, multi-column, and image based documents are not supported."
1235 msgstr ""
1236
1237 #: ../../../__w/calibre/calibre/manual/conversion.rst:759
1238 msgid ""
1239 "Extraction of vector images and tables from within the document is also not "
1240 "supported."
1241 msgstr ""
1242
1243 #: ../../../__w/calibre/calibre/manual/conversion.rst:760
1244 msgid ""
1245 "Some PDFs use special glyphs to represent ll or ff or fi, etc. Conversion of"
1246 " these may or may not work depending on just how they are represented "
1247 "internally in the PDF."
1248 msgstr ""
1249
1250 #: ../../../__w/calibre/calibre/manual/conversion.rst:761
1251 msgid "Links and Tables of Contents are not supported"
1252 msgstr "Links und Inhaltsverzeichnisse werden nicht unterstützt"
1253
1254 #: ../../../__w/calibre/calibre/manual/conversion.rst:762
1255 msgid ""
1256 "PDFs that use embedded non-Unicode fonts to represent non-English characters"
1257 " will result in garbled output for those characters"
1258 msgstr ""
1259
1260 #: ../../../__w/calibre/calibre/manual/conversion.rst:763
1261 msgid ""
1262 "Some PDFs are made up of photographs of the page with OCRed text behind "
1263 "them. In such cases calibre uses the OCRed text, which can be very different"
1264 " from what you see when you view the PDF file"
1265 msgstr ""
1266
1267 #: ../../../__w/calibre/calibre/manual/conversion.rst:764
1268 msgid ""
1269 "PDFs that are used to display complex text, like right to left languages and"
1270 " math typesetting will not convert correctly"
1271 msgstr ""
1272
1273 #: ../../../__w/calibre/calibre/manual/conversion.rst:766
1274 msgid ""
1275 "To re-iterate **PDF is a really, really bad** format to use as input. If you"
1276 " absolutely must use PDF, then be prepared for an output ranging anywhere "
1277 "from decent to unusable, depending on the input PDF."
1278 msgstr ""
1279
1280 #: ../../../__w/calibre/calibre/manual/conversion.rst:770
1281 msgid "Comic book collections"
1282 msgstr ""
1283
1284 #: ../../../__w/calibre/calibre/manual/conversion.rst:772
1285 msgid ""
1286 "A comic book collection is a .cbc file. A .cbc file is a ZIP file that "
1287 "contains other CBZ/CBR files. In addition the .cbc file must contain a "
1288 "simple text file called comics.txt, encoded in UTF-8. The comics.txt file "
1289 "must contain a list of the comics files inside the .cbc file, in the form "
1290 "filename:title, as shown below::"
1291 msgstr ""
1292
1293 #: ../../../__w/calibre/calibre/manual/conversion.rst:780
1294 msgid "The .cbc file will then contain::"
1295 msgstr "Die .cbc Datei enthält dann:"
1296
1297 #: ../../../__w/calibre/calibre/manual/conversion.rst:787
1298 msgid ""
1299 "calibre will automatically convert this .cbc file into an e-book with a "
1300 "Table of Contents pointing to each entry in comics.txt."
1301 msgstr ""
1302
1303 #: ../../../__w/calibre/calibre/manual/conversion.rst:791
1304 msgid "EPUB advanced formatting demo"
1305 msgstr ""
1306
1307 #: ../../../__w/calibre/calibre/manual/conversion.rst:793
1308 msgid ""
1309 "Various advanced formatting for EPUB files is demonstrated in this "
1310 ":download_file:`demo file <demos/demo.epub>`. The file was created from hand"
1311 " coded HTML using calibre and is meant to be used as a template for your own"
1312 " EPUB creation efforts."
1313 msgstr ""
1314
1315 #: ../../../__w/calibre/calibre/manual/conversion.rst:796
1316 msgid ""
1317 "The source HTML it was created from is available :download_file:`demo.zip "
1318 "<demos/demo.zip>`. The settings used to create the EPUB from the ZIP file "
1319 "are::"
1320 msgstr ""
1321
1322 #: ../../../__w/calibre/calibre/manual/conversion.rst:801
1323 msgid ""
1324 "Note that because this file explores the potential of EPUB, most of the "
1325 "advanced formatting is not going to work on readers less capable than "
1326 "calibre's built-in EPUB viewer."
1327 msgstr ""
1328
1329 #: ../../../__w/calibre/calibre/manual/conversion.rst:805
1330 msgid "Convert ODT documents"
1331 msgstr "ODT-Dokumente konvertieren"
1332
1333 #: ../../../__w/calibre/calibre/manual/conversion.rst:807
1334 msgid ""
1335 "calibre can directly convert ODT (OpenDocument Text) files. You should use "
1336 "styles to format your document and minimize the use of direct formatting. "
1337 "When inserting images into your document you need to anchor them to the "
1338 "paragraph, images anchored to a page will all end up in the front of the "
1339 "conversion."
1340 msgstr ""
1341
1342 #: ../../../__w/calibre/calibre/manual/conversion.rst:810
1343 msgid ""
1344 "To enable automatic detection of chapters, you need to mark them with the "
1345 "built-in styles called :guilabel:`Heading 1`, :guilabel:`Heading 2`, ..., "
1346 ":guilabel:`Heading 6` (:guilabel:`Heading 1` equates to the HTML tag "
1347 "``<h1>``, :guilabel:`Heading 2` to ``<h2>``, etc). When you convert in "
1348 "calibre you can enter which style you used into the :guilabel:`Detect "
1349 "chapters at` box. Example:"
1350 msgstr ""
1351
1352 #: ../../../__w/calibre/calibre/manual/conversion.rst:816
1353 msgid ""
1354 "If you mark Chapters with style :guilabel:`Heading 2`, you have to set the "
1355 "'Detect chapters at' box to ``//h:h2``"
1356 msgstr ""
1357
1358 #: ../../../__w/calibre/calibre/manual/conversion.rst:817
1359 msgid ""
1360 "For a nested TOC with Sections marked with :guilabel:`Heading 2` and the "
1361 "Chapters marked with :guilabel:`Heading 3` you need to enter "
1362 "``//h:h2|//h:h3``. On the Convert - TOC page set the :guilabel:`Level 1 TOC`"
1363 " box to ``//h:h2`` and the :guilabel:`Level 2 TOC` box to ``//h:h3``."
1364 msgstr ""
1365
1366 #: ../../../__w/calibre/calibre/manual/conversion.rst:819
1367 msgid ""
1368 "Well-known document properties (Title, Keywords, Description, Creator) are "
1369 "recognized and calibre will use the first image (not too small, and with "
1370 "good aspect-ratio) as the cover image."
1371 msgstr ""
1372
1373 #: ../../../__w/calibre/calibre/manual/conversion.rst:821
1374 msgid ""
1375 "There is also an advanced property conversion mode, which is activated by "
1376 "setting the custom property ``opf.metadata`` ('Yes or No' type) to Yes in "
1377 "your ODT document (File->Properties->Custom Properties). If this property is"
1378 " detected by calibre, the following custom properties are recognized "
1379 "(``opf.authors`` overrides document creator)::"
1380 msgstr ""
1381
1382 #: ../../../__w/calibre/calibre/manual/conversion.rst:834
1383 msgid ""
1384 "In addition to this, you can specify the picture to use as the cover by "
1385 "naming it ``opf.cover`` (right click, Picture->Options->Name) in the ODT. If"
1386 " no picture with this name is found, the 'smart' method is used. As the "
1387 "cover detection might result in double covers in certain output formats, the"
1388 " process will remove the paragraph (only if the only content is the cover!) "
1389 "from the document. But this works only with the named picture!"
1390 msgstr ""
1391
1392 #: ../../../__w/calibre/calibre/manual/conversion.rst:841
1393 msgid ""
1394 "To disable cover detection you can set the custom property ``opf.nocover`` "
1395 "('Yes or No' type) to Yes in advanced mode."
1396 msgstr ""
1397
1398 #: ../../../__w/calibre/calibre/manual/conversion.rst:844
1399 msgid "Converting to PDF"
1400 msgstr "Konvertieren zu PDF"
1401
1402 #: ../../../__w/calibre/calibre/manual/conversion.rst:846
1403 msgid ""
1404 "The first, most important, setting to decide on when converting to PDF is "
1405 "the page size. By default, calibre uses a page size of \"U.S. Letter\". You "
1406 "can change this to another standard page size or a completely custom size in"
1407 " the :guilabel:`PDF Output` section of the conversion dialog. If you are "
1408 "generating a PDF to be used on a specific device, you can turn on the option"
1409 " to use the page size from the :guilabel:`output profile` instead. So if "
1410 "your output profile is set to Kindle, calibre will create a PDF with page "
1411 "size suitable for viewing on the small Kindle screen."
1412 msgstr ""
1413
1414 #: ../../../__w/calibre/calibre/manual/conversion.rst:856
1415 msgid "Headers and Footers"
1416 msgstr "Kopf- und Fußzeilen"
1417
1418 #: ../../../__w/calibre/calibre/manual/conversion.rst:857
1419 msgid ""
1420 "You can insert arbitrary headers and footers on each page of the PDF by "
1421 "specifying header and footer templates. Templates are just snippets of HTML "
1422 "code that get rendered in the header and footer locations. For example, to "
1423 "display page numbers centered at the bottom of every page, in green, use the"
1424 " following footer template::"
1425 msgstr "Sie können beliebige Kopf- und Fußzeilen auf jeder Seite des PDF einfügen, indem Sie Kopf-und Fußzeilenvorlagen festlegen. Vorlagen sind einfach Schnipsel von HTML Code, die an den Positionen von Kopf- und Fußzeile dargestellt werden. Um zum Beispiel Seitenzahlen zentriert unten auf jeder Seite und in Grün anzuzeigen nutzen Sie die folgende Fußzeilenvorlage::"
1426
1427 #: ../../../__w/calibre/calibre/manual/conversion.rst:865
1428 msgid ""
1429 "calibre will automatically replace :code:`_PAGENUM_` with the current page "
1430 "number. You can even put different content on even and odd pages, for "
1431 "example the following header template will show the title on odd pages and "
1432 "the author on even pages::"
1433 msgstr ""
1434
1435 #: ../../../__w/calibre/calibre/manual/conversion.rst:874
1436 msgid ""
1437 "calibre will automatically replace :code:`_TITLE_` and :code:`_AUTHOR_` with"
1438 " the title and author of the document being converted. Setting "
1439 ":code:`justify-content` to :code:`flex-end` will cause the text to be right "
1440 "aligned."
1441 msgstr ""
1442
1443 #: ../../../__w/calibre/calibre/manual/conversion.rst:879
1444 msgid ""
1445 "You can also display text at the left and right edges and change the font "
1446 "size, as demonstrated with this header template::"
1447 msgstr ""
1448
1449 #: ../../../__w/calibre/calibre/manual/conversion.rst:887
1450 msgid ""
1451 "This will display the title at the left and the author at the right, in a "
1452 "font size smaller than the main text."
1453 msgstr "Dies wird den Titel auf der linken Seite und den Autor an der rechten Seite anzeigen, in einer Schriftgröße kleiner als der Haupttext ."
1454
1455 #: ../../../__w/calibre/calibre/manual/conversion.rst:890
1456 msgid "You can also use the current section in templates, as shown below::"
1457 msgstr "Sie können auch den aktuellen Abschnitt in Vorlagen nutzen, wie nachfolgend gezeigt::"
1458
1459 #: ../../../__w/calibre/calibre/manual/conversion.rst:894
1460 msgid ""
1461 ":code:`_SECTION_` is replaced by whatever the name of the current section "
1462 "is. These names are taken from the metadata Table of Contents in the "
1463 "document (the PDF Outline). If the document has no table of contents then it"
1464 " will be replaced by empty text. If a single PDF page has multiple sections,"
1465 " the first section on the page will be used. Similarly, there is a variable "
1466 "named :code:`_TOP_LEVEL_SECTION_` that can be used to get the name of the "
1467 "current top-level section."
1468 msgstr ""
1469
1470 #: ../../../__w/calibre/calibre/manual/conversion.rst:901
1471 msgid ""
1472 "You can even use JavaScript inside the header and footer templates, for "
1473 "example, the following template will cause page numbers to start at 4 "
1474 "instead of 1::"
1475 msgstr "Sie können JavaScript sogar innerhalb der Kopf- und Fußzeilenvorlagen verwenden. Die folgende Vorlage bewirkt beispielsweise, dass die Seitenzahlen bei 4 statt bei 1 beginnen:"
1476
1477 #: ../../../__w/calibre/calibre/manual/conversion.rst:911
1478 msgid ""
1479 "In addition there are some more variables you can use in the headers and "
1480 "footers, documented below:"
1481 msgstr "Zusätzlich gibt es einige weitere Variablen, die Sie in den Kopf- und Fußzeilen verwenden können. Diese sind im Folgenden dokumentiert:"
1482
1483 #: ../../../__w/calibre/calibre/manual/conversion.rst:914
1484 msgid ""
1485 "``_TOTAL_PAGES_`` - total number of pages in the PDF file, useful for "
1486 "implementing a progress counter, for example."
1487 msgstr ""
1488
1489 #: ../../../__w/calibre/calibre/manual/conversion.rst:916
1490 msgid ""
1491 "``_TOP_LEVEL_SECTION_PAGES_`` - total number of pages in the current top "
1492 "level section"
1493 msgstr ""
1494
1495 #: ../../../__w/calibre/calibre/manual/conversion.rst:918
1496 msgid ""
1497 "``_TOP_LEVEL_SECTION_PAGENUM_`` - the page number of the current page within"
1498 " the current top level section"
1499 msgstr ""
1500
1501 #: ../../../__w/calibre/calibre/manual/conversion.rst:920
1502 msgid "``_WIDTH_PIXELS_`` - the width of the header/footer area in pixels"
1503 msgstr ""
1504
1505 #: ../../../__w/calibre/calibre/manual/conversion.rst:921
1506 msgid "``_HEIGHT_PIXELS_`` - the height of the header/footer area in pixels"
1507 msgstr ""
1508
1509 #: ../../../__w/calibre/calibre/manual/conversion.rst:923
1510 msgid ""
1511 "When adding headers and footers make sure you set the page top and bottom "
1512 "margins to large enough values, under the :guilabel:`PDF Output` section of "
1513 "the conversion dialog."
1514 msgstr ""
1515
1516 #: ../../../__w/calibre/calibre/manual/conversion.rst:928
1517 msgid "Printable Table of Contents"
1518 msgstr "Ausdruckbares Inhaltsverzeichnis"
1519
1520 #: ../../../__w/calibre/calibre/manual/conversion.rst:930
1521 msgid ""
1522 "You can also insert a printable Table of Contents at the end of the PDF that"
1523 " lists the page numbers for every section. This is very useful if you intend"
1524 " to print out the PDF to paper. If you wish to use the PDF on an electronic "
1525 "device, then the PDF Outline provides this functionality and is generated by"
1526 " default."
1527 msgstr "Es kann auch ein ausdruckbares Inhaltsverzeichnis am Ende des PDF eingefügt werden, das die Seitenzahlen für jeden Abschnitt auflistet. Dies ist sehr sinnvoll, wenn Sie die PDF-Datei auf Papier ausdrucken möchten. Falls Sie die PDF-Datei auf einem elektronischen Gerät verwenden möchten, dann bietet die PDF-Gliederung diese Funktionalität und wird standardmäßig erstellt."
1528
1529 #: ../../../__w/calibre/calibre/manual/conversion.rst:935
1530 msgid ""
1531 "You can customize the look of the generated Table of contents by using the "
1532 "Extra CSS conversion setting under the Look & feel part of the conversion "
1533 "dialog. The default CSS used is listed below, simply copy it and make "
1534 "whatever changes you like."
1535 msgstr ""
1536
1537 #: ../../../__w/calibre/calibre/manual/conversion.rst:955
1538 msgid "Custom page margins for individual HTML files"
1539 msgstr ""
1540
1541 #: ../../../__w/calibre/calibre/manual/conversion.rst:957
1542 msgid ""
1543 "If you are converting an EPUB or AZW3 file with multiple individual HTML "
1544 "files inside it and you want to change the page margins for a particular "
1545 "HTML file you can add the following style block to the HTML file using the "
1546 "calibre E-book editor:"
1547 msgstr ""
1548
1549 #: ../../../__w/calibre/calibre/manual/conversion.rst:974
1550 msgid ""
1551 "Then, in the PDF output section of the conversion dialog, turn on the option"
1552 " to :guilabel:`Use page margins from the document being converted`. Now all "
1553 "pages generated from this HTML file will have ``10pt`` margins."
1554 msgstr ""