Debian Codegraph @

translations/manual/ca/server.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # Robert Antoni Buj Gelonch <[email protected]>, 2016-2017
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: calibre\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2021-05-20 11:33+0000\n"
12 "PO-Revision-Date: 2021-05-15 09:01+0000\n"
13 "Last-Translator: Kovid Goyal <[email protected]>\n"
14 "Language-Team: Catalan (http://www.transifex.com/calibre/calibre/language/ca/)\n"
15 "MIME-Version: 1.0\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Language: ca\n"
19 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
20
21 #: ../../__w/calibre/calibre/manual/server.rst:2
22 msgid "The calibre Content server"
23 msgstr "El servidor de continguts de calibre"
24
25 #: ../../__w/calibre/calibre/manual/server.rst:4
26 msgid ""
27 "The calibre :guilabel:`Content server` allows you to access your calibre "
28 "libraries and read books directly in a browser on your favorite mobile phone"
29 " or tablet device. As a result, you do not need to install any dedicated "
30 "book reading/management apps on your phone. Just use the browser. The server"
31 " downloads and stores the book you are reading in an off-line cache so that "
32 "you can read it even when there is no internet connection."
33 msgstr ""
34
35 #: ../../__w/calibre/calibre/manual/server.rst:13
36 msgid "Contents"
37 msgstr "Contingut"
38
39 #: ../../__w/calibre/calibre/manual/server.rst:15
40 msgid ""
41 "To start the server, click the :guilabel:`Connect/share` button and choose "
42 ":guilabel:`Start Content server`. You might get a message from your "
43 "computer's firewall or anti-virus program asking if it is OK to allow access"
44 " to ``calibre.exe``. Click the ``Allow`` or ``OK`` button. Then open a "
45 "browser (preferably Chrome or Firefox) in your computer and type in the "
46 "following address:"
47 msgstr ""
48
49 #: ../../__w/calibre/calibre/manual/server.rst:22
50 msgid "http://127.0.0.1:8080"
51 msgstr ""
52
53 #: ../../__w/calibre/calibre/manual/server.rst:24
54 msgid ""
55 "This will open a page in the browser showing you your calibre libraries, "
56 "click on any one and browse the books in it. Click on a book, and it will "
57 "show you all the metadata about the book, along with buttons to "
58 ":guilabel:`Read book` and :guilabel:`Download book`. Click the "
59 ":guilabel:`Read book` button to start reading the book."
60 msgstr ""
61
62 #: ../../__w/calibre/calibre/manual/server.rst:30
63 msgid ""
64 "The address used above ``http://127.0.0.1:8080`` will only work on the "
65 "computer that is running calibre. To access the server from other "
66 "computers/phones/tablets/etc. you will need to do a little more work, as "
67 "described in the next section."
68 msgstr ""
69
70 #: ../../__w/calibre/calibre/manual/server.rst:37
71 msgid "Accessing the Content server from other devices"
72 msgstr ""
73
74 #: ../../__w/calibre/calibre/manual/server.rst:39
75 msgid ""
76 "There are two types of remote device access that you will typically need. "
77 "The first, simpler kind is from within your home network. If you are running"
78 " calibre on a computer on your home network and you have also connected your"
79 " other devices to the same home network, then you should be easily able to "
80 "access the server on those devices."
81 msgstr ""
82
83 #: ../../__w/calibre/calibre/manual/server.rst:46
84 msgid "Accessing the server from devices on your home network"
85 msgstr ""
86
87 #: ../../__w/calibre/calibre/manual/server.rst:48
88 msgid ""
89 "After starting the server in calibre as described above, click the "
90 ":guilabel:`Connect/share` button again. Instead of the :guilabel:`Start "
91 "Content server` action, you should see a :guilabel:`Stop Content server` "
92 "action instead. To the right of this action will be listed an IP address and"
93 " port number. These look like a bunch of numbers separated by periods. For "
94 "example::"
95 msgstr ""
96
97 #: ../../__w/calibre/calibre/manual/server.rst:57
98 msgid ""
99 "These numbers tell you what address to use to connect to the server in your "
100 "devices. Following the example above, the address becomes::"
101 msgstr ""
102
103 #: ../../__w/calibre/calibre/manual/server.rst:62
104 msgid ""
105 "The first part of the address is always ``http://`` the next part is the IP "
106 "address, which is the numbers before the comma and finally we have the port "
107 "number which must be added to the IP address with a colon (``:``). If you "
108 "are lucky, that should be all you need and you will be looking at the "
109 "calibre libraries on your device. If not, read on."
110 msgstr ""
111
112 #: ../../__w/calibre/calibre/manual/server.rst:70
113 msgid "Trouble-shooting the home network connection"
114 msgstr ""
115
116 #: ../../__w/calibre/calibre/manual/server.rst:72
117 msgid ""
118 "If you are unable to access the server from your device, try the following "
119 "steps:"
120 msgstr ""
121
122 #: ../../__w/calibre/calibre/manual/server.rst:75
123 msgid ""
124 "Check that the server is running by opening the address "
125 "``http://127.0.0.1:8080`` in a browser running on the same computer as the "
126 "server."
127 msgstr ""
128
129 #: ../../__w/calibre/calibre/manual/server.rst:79
130 msgid ""
131 "Check that your firewall/anti-virus is allowing connections to your computer"
132 " on the port ``8080`` and to the calibre program. The easiest way to "
133 "eliminate the firewall/anti-virus as the source of problems is to "
134 "temporarily turn them both off and then try connecting. You should first "
135 "disconnect from the internet, before turning off the firewall, to keep your "
136 "computer safe."
137 msgstr ""
138
139 #: ../../__w/calibre/calibre/manual/server.rst:86
140 msgid ""
141 "Check that your device and computer are on the same network. This means they"
142 " should both be connected to the same wireless router. In particular neither"
143 " should be using a cellular or ISP provided direct-WiFi connection."
144 msgstr ""
145
146 #: ../../__w/calibre/calibre/manual/server.rst:90
147 msgid ""
148 "If you have non-standard networking setup, it might be that the IP address "
149 "shown on the :guilabel:`Connect/share` menu is incorrect. In such a case you"
150 " will have to figure out what the correct IP address to use is, yourself. "
151 "Unfortunately, given the infinite diversity of network configurations "
152 "possible, it is not possible to give you a roadmap for doing so."
153 msgstr ""
154
155 #: ../../__w/calibre/calibre/manual/server.rst:97
156 msgid ""
157 "If you have setup a username and password, first try it without that to see "
158 "if it is causing issues. Some e-ink devices have browsers that do not handle"
159 " authentication. You can sometimes workaround this by including the username"
160 " and password in the URL, for example: "
161 "``http://username:[email protected]:8080``."
162 msgstr ""
163
164 #: ../../__w/calibre/calibre/manual/server.rst:103
165 msgid ""
166 "If you are stuck, you can always ask for help in the `calibre user forums`_."
167 msgstr ""
168
169 #: ../../__w/calibre/calibre/manual/server.rst:107
170 msgid "Accessing the server from anywhere on the internet"
171 msgstr ""
172
173 #: ../../__w/calibre/calibre/manual/server.rst:111
174 msgid ""
175 "Before doing this you should turn on username/password protection in the "
176 "server, otherwise anyone in the world will be able to access your books. Go "
177 "to :guilabel:`Preferences->Sharing->Sharing over the net` and enable the "
178 "option to :guilabel:`Require username and password to access the content "
179 "server`."
180 msgstr ""
181
182 #: ../../__w/calibre/calibre/manual/server.rst:117
183 msgid ""
184 "While the particular details on setting up internet access vary depending on"
185 " the network configuration and type of computer you are using, the basic "
186 "schema is as follows."
187 msgstr ""
188
189 #: ../../__w/calibre/calibre/manual/server.rst:121
190 msgid ""
191 "Find out the external IP address of the computer you are going to run the "
192 "server on. You can do that by visiting the site `What is my IP address "
193 "<https://www.whatismyip.com/>`_ in a browser running on the computer."
194 msgstr ""
195
196 #: ../../__w/calibre/calibre/manual/server.rst:125
197 msgid ""
198 "If the computer is behind a router, enable port forwarding on the router to "
199 "forward the port ``8080`` (or whatever port you choose to run the calibre "
200 "Content server on) to the computer."
201 msgstr ""
202
203 #: ../../__w/calibre/calibre/manual/server.rst:129
204 msgid ""
205 "Make sure the calibre server is allowed through any firewalls/anti-virus "
206 "programs on your computer."
207 msgstr ""
208
209 #: ../../__w/calibre/calibre/manual/server.rst:132
210 msgid ""
211 "Now you should be able to access the server on any internet-connected device"
212 " using the IP address you found in the first step. For example, if the IP "
213 "address you found was ``123.123.123.123`` and the port you are using for the"
214 " calibre server is ``8080``, the address to use on your device becomes: "
215 "``http://123.123.123.123:8080``."
216 msgstr ""
217
218 #: ../../__w/calibre/calibre/manual/server.rst:138
219 msgid ""
220 "Optionally, use a service like `no-ip <https://www.noip.com/free>`_ to setup"
221 " an easy to remember address to use instead of the IP address you found in "
222 "the first step."
223 msgstr ""
224
225 #: ../../__w/calibre/calibre/manual/server.rst:143
226 msgid ""
227 "For maximum security, you should also enable HTTPS on the Content server. "
228 "You can either do so directly in the server by providing the path to the "
229 "HTTPS certificate to use in the advanced configuration options for the "
230 "server, or you can setup a reverse proxy as described below, to use an "
231 "existing HTTPS setup."
232 msgstr ""
233
234 #: ../../__w/calibre/calibre/manual/server.rst:151
235 msgid "The server interface"
236 msgstr ""
237
238 #: ../../__w/calibre/calibre/manual/server.rst:153
239 msgid ""
240 "The server interface is a simplified version of the main calibre interface, "
241 "optimised for use with touch screens. The home screen shows you books you "
242 "are currently reading as well as allowing to choose a calibre library you "
243 "want to browse. The server in calibre gives you access to all your "
244 "libraries, not just a single one, as before."
245 msgstr ""
246
247 #: ../../__w/calibre/calibre/manual/server.rst:160
248 msgid "The book list"
249 msgstr ""
250
251 #: ../../__w/calibre/calibre/manual/server.rst:162
252 msgid ""
253 "The server book list is a simple grid of covers. Tap on a cover to see the "
254 "detailed metadata for a book, or to read the book. If you prefer a more "
255 "detailed list, you can change the default view by clicking the three "
256 "vertical dots in the top right corner."
257 msgstr ""
258
259 #: ../../__w/calibre/calibre/manual/server.rst:167
260 msgid ""
261 "Sorting and searching of the book list should be familiar to calibre users. "
262 "They can be accessed by clicking their icons in the top right area. They "
263 "both work exactly the same as in the main calibre program. The search page "
264 "even allows you to construct search queries by clicking on "
265 "authors/tags/etc., just as you can using the Tag browser in the main "
266 "program."
267 msgstr ""
268
269 #: ../../__w/calibre/calibre/manual/server.rst:173
270 msgid ""
271 "A much loved feature of the main program, :guilabel:`Virtual libraries` is "
272 "present in the server interface as well. Click the three vertical dots in "
273 "the top right corner to choose a Virtual library."
274 msgstr ""
275
276 #: ../../__w/calibre/calibre/manual/server.rst:178
277 msgid "The book reader"
278 msgstr ""
279
280 #: ../../__w/calibre/calibre/manual/server.rst:180
281 msgid ""
282 "You can read any book in your calibre library by simply tapping on it and "
283 "then tapping the :guilabel:`Read book` button. The books reader is very "
284 "simple to operate. You can both tap and swipe to turn pages. Swiping up/down"
285 " skips between chapters. Tapping the top quarter of the screen gets you the "
286 "detailed controls and viewer preferences."
287 msgstr ""
288
289 #: ../../__w/calibre/calibre/manual/server.rst:186
290 msgid ""
291 "If you leave the Content server running, you can even open the same book on "
292 "multiple devices and it will remember your last read position. If it does "
293 "not you can force a sync by tapping in the top quarter and choosing "
294 ":guilabel:`Sync`."
295 msgstr ""
296
297 #: ../../__w/calibre/calibre/manual/server.rst:192
298 msgid "Browser support"
299 msgstr ""
300
301 #: ../../__w/calibre/calibre/manual/server.rst:194
302 msgid ""
303 "The new calibre server makes lots of use of advanced HTML 5 and CSS 3 "
304 "features. As such it requires an up-to-date browser to use. It has been "
305 "tested on Android Chrome and iOS Safari as well as Chrome and Firefox on the"
306 " desktop."
307 msgstr ""
308
309 #: ../../__w/calibre/calibre/manual/server.rst:198
310 msgid ""
311 "The server is careful to use functionality that has either been already "
312 "standardised or is on the standards track. As such if it does not currently "
313 "work with your favorite browser, it probably will once that browser has "
314 "caught up."
315 msgstr ""
316
317 #: ../../__w/calibre/calibre/manual/server.rst:203
318 msgid ""
319 "If you are using a particularly old or limited browser or you don't like to "
320 "run JavaScript, you can use the *mobile* view, by simply adding ``/mobile`` "
321 "to the server address."
322 msgstr ""
323
324 #: ../../__w/calibre/calibre/manual/server.rst:208
325 msgid ""
326 "On iOS, Apple allows only a single browser engine, so Firefox, Chrome and "
327 "Safari are all actually the same browser under the hood. The new server "
328 "interface requires iOS 10.3.2 or newer. On Android, the server has been "
329 "tested with Chrome version 58 and newer."
330 msgstr ""
331
332 #: ../../__w/calibre/calibre/manual/server.rst:214
333 msgid "Enabling offline support"
334 msgstr ""
335
336 #: ../../__w/calibre/calibre/manual/server.rst:216
337 msgid ""
338 "Browser makers have been trying to force people to use SSL by disabling "
339 "advanced features in their browsers for plain HTTP connections. One such "
340 "casualty is offline support. So you may need to enable HTTPS on the server "
341 "to get offline support working. In addition, in Firefox on Android, you will"
342 " need to type ``about:config`` and search for ``browser.tabs.useCache`` and "
343 "toggle it to ``true``."
344 msgstr ""
345
346 #: ../../__w/calibre/calibre/manual/server.rst:224
347 msgid "Managing user accounts from the command-line only"
348 msgstr ""
349
350 #: ../../__w/calibre/calibre/manual/server.rst:226
351 msgid ""
352 "The calibre program has a nice section in :guilabel:`Preferences` to allow "
353 "you to manage user accounts for the server. However, if you want to run the "
354 "standalone server and cannot run the main calibre program on the same "
355 "computer/user account, you can also manage users using just the command-"
356 "line."
357 msgstr ""
358
359 #: ../../__w/calibre/calibre/manual/server.rst:231
360 msgid ""
361 "You can manage user accounts using the ``--manage-users`` option to the "
362 "standalone ``calibre-server`` program. Suppose you want to store the user "
363 "database in the folder ``/srv/calibre``, then you create it by running::"
364 msgstr ""
365
366 #: ../../__w/calibre/calibre/manual/server.rst:238
367 msgid ""
368 "Just follow the prompts to create user accounts, set their permission, etc. "
369 "Once you are done, you can run the server as::"
370 msgstr ""
371
372 #: ../../__w/calibre/calibre/manual/server.rst:243
373 msgid "It will use the user accounts you created in the previous step."
374 msgstr ""
375
376 #: ../../__w/calibre/calibre/manual/server.rst:247
377 msgid "Integrating the calibre Content server into other servers"
378 msgstr ""
379
380 #: ../../__w/calibre/calibre/manual/server.rst:249
381 msgid ""
382 "Here, we will show you how to integrate the calibre Content server into "
383 "another server. The most common reason for this is to make use of SSL or to "
384 "serve the calibre library as part of a larger site. The basic technique is "
385 "to run the calibre server and setup a reverse proxy to it from the main "
386 "server."
387 msgstr ""
388
389 #: ../../__w/calibre/calibre/manual/server.rst:254
390 msgid ""
391 "A reverse proxy is when your normal server accepts incoming requests and "
392 "passes them onto the calibre server. It then reads the response from the "
393 "calibre server and forwards it to the client. This means that you can simply"
394 " run the calibre server as normal without trying to integrate it closely "
395 "with your main server."
396 msgstr ""
397
398 #: ../../__w/calibre/calibre/manual/server.rst:261
399 msgid "Using a full virtual host"
400 msgstr ""
401
402 #: ../../__w/calibre/calibre/manual/server.rst:263
403 msgid ""
404 "The simplest configuration is to dedicate a full virtual host to the calibre"
405 " server. In this case, run the calibre server as::"
406 msgstr ""
407
408 #: ../../__w/calibre/calibre/manual/server.rst:268
409 msgid ""
410 "Now setup the virtual host in your main server, for example, for nginx::"
411 msgstr ""
412
413 #: ../../__w/calibre/calibre/manual/server.rst:283
414 msgid "Or, for Apache::"
415 msgstr ""
416
417 #: ../../__w/calibre/calibre/manual/server.rst:298
418 msgid "Using a URL prefix"
419 msgstr ""
420
421 #: ../../__w/calibre/calibre/manual/server.rst:300
422 msgid ""
423 "If you do not want to dedicate a full virtual host to calibre, you can have "
424 "it use a URL prefix. Start the calibre server as::"
425 msgstr ""
426
427 #: ../../__w/calibre/calibre/manual/server.rst:305
428 msgid ""
429 "The key parameter here is ``--url-prefix /calibre``. This causes the Content"
430 " server to serve all URLs prefixed by ``/calibre``. To see this in action, "
431 "visit ``http://localhost:8080/calibre`` in your browser. You should see the "
432 "normal Content server website, but now it will run under ``/calibre``."
433 msgstr ""
434
435 #: ../../__w/calibre/calibre/manual/server.rst:307
436 msgid "With nginx, the required configuration is::"
437 msgstr ""
438
439 #: ../../__w/calibre/calibre/manual/server.rst:324
440 msgid ""
441 "For Apache, first enable the proxy modules in Apache, by adding the "
442 "following to :file:`httpd.conf`::"
443 msgstr ""
444
445 #: ../../__w/calibre/calibre/manual/server.rst:329
446 msgid ""
447 "The exact technique for enabling the proxy modules will vary depending on "
448 "your Apache installation. Once you have the proxy modules enabled, add the "
449 "following rules to :file:`httpd.conf` (or if you are using virtual hosts to "
450 "the conf file for the virtual host in question)::"
451 msgstr ""
452
453 #: ../../__w/calibre/calibre/manual/server.rst:336
454 msgid ""
455 "That's all, you will now be able to access the calibre Content server under "
456 "the ``/calibre`` URL in your main server. The above rules pass all requests "
457 "under ``/calibre`` to the calibre server running on port 8080 and thanks to "
458 "the ``--url-prefix`` option above, the calibre server handles them "
459 "transparently."
460 msgstr ""
461
462 #: ../../__w/calibre/calibre/manual/server.rst:341
463 msgid ""
464 "When using a reverse proxy, you should tell the calibre Content server to "
465 "only listen on localhost, by using ``--listen-on 127.0.0.1``. That way, the "
466 "server will only listen for connections coming from the same computer, i.e. "
467 "from the reverse proxy."
468 msgstr ""
469
470 #: ../../__w/calibre/calibre/manual/server.rst:348
471 msgid ""
472 "If you have setup SSL for your main server, you should tell the calibre "
473 "server to use basic authentication instead of digest authentication, as it "
474 "is faster. To do so, pass the ``--auth-mode=basic`` option to ``calibre-"
475 "server``."
476 msgstr ""
477
478 #: ../../__w/calibre/calibre/manual/server.rst:357
479 msgid "Creating a service for the calibre server on a modern Linux system"
480 msgstr ""
481
482 #: ../../__w/calibre/calibre/manual/server.rst:359
483 msgid ""
484 "You can easily create a service to run calibre at boot on a modern (`systemd"
485 " <https://www.freedesktop.org/wiki/Software/systemd/>`_) based Linux system."
486 " Just create the file ``/etc/systemd/system/calibre-server.service`` with "
487 "the contents shown below::"
488 msgstr ""
489
490 #: ../../__w/calibre/calibre/manual/server.rst:378
491 msgid ""
492 "Change ``mylinuxuser`` and ``mylinuxgroup`` to whatever user and group you "
493 "want the server to run as. This should be the same user and group that own "
494 "the files in the calibre library folder. Note that it is generally not a "
495 "good idea to run the server as root. Also change the path to the calibre "
496 "library folder to suit your system. You can add multiple libraries if "
497 "needed. See the help for the ``calibre-server`` command."
498 msgstr ""
499
500 #: ../../__w/calibre/calibre/manual/server.rst:385
501 msgid "Now run::"
502 msgstr ""
503
504 #: ../../__w/calibre/calibre/manual/server.rst:389
505 msgid "to start the server. Check its status with::"
506 msgstr ""
507
508 #: ../../__w/calibre/calibre/manual/server.rst:393
509 msgid "To make it start at boot, run::"
510 msgstr ""
511
512 #: ../../__w/calibre/calibre/manual/server.rst:399
513 msgid ""
514 "The calibre server *does not* need a running X server, but it does need the "
515 "X libraries installed as some components it uses link against them."
516 msgstr ""
517
518 #: ../../__w/calibre/calibre/manual/server.rst:404
519 msgid ""
520 "The calibre server also supports systemd socket activation, so you can use "
521 "that, if needed, as well."
522 msgstr ""