| 1 |
This is a program designed to speed up writing tapes on remote tape |
| 2 |
drives. Requirements are shared memory and locks which normally |
| 3 |
means that these are supported in your kernel. |
| 4 |
|
| 5 |
Buffer has been tested under SunOS 4.0.*, SunOS 4.1.*, Solarix, HP-UX 7.0, |
| 6 |
and Gould UTX 2.1A (sv universe). |
| 7 |
|
| 8 |
The program splits itself into two processes. The first process reads |
| 9 |
(and reblocks) from stdin into a shared memory buffer. The second |
| 10 |
writes from the shared memory buffer to stdout. Doing it this way |
| 11 |
means that the writing side effectly sits in a tight write loop and |
| 12 |
doesn't have to wait for input. Similarly for the input side. It is |
| 13 |
this waiting that slows down other reblocking processes, like dd. |
| 14 |
|
| 15 |
I run an archive and need to write large chunks out to tape regularly |
| 16 |
with an ethernet in the way. Using 'buffer' in a command like: |
| 17 |
|
| 18 |
tar cvf - stuff | rsh somebox buffer -o /dev/rst8 |
| 19 |
|
| 20 |
is a factor of 5 faster than the best alternative, gnu tar with its |
| 21 |
remote tape option: |
| 22 |
|
| 23 |
tar cvf somebox:/dev/rst8 stuff |
| 24 |
|
| 25 |
We have been using buffer here at Imperial for a couple of years now |
| 26 |
for writing tar tapes and the main system dumps. |
| 27 |
|
| 28 |
Thanks to Kevin Twidle <[email protected]> for the -p and -B code. |
| 29 |
Thanks to Bard Isley <[email protected]> for fixes to the |
| 30 |
read loop/SIGCHLD handling. |
| 31 |
Thanks to [email protected] for the DEC Alpha patches. |
| 32 |
Thanks to [email protected] (Erik L. Kargard) for the AMPEX enhancements. |
| 33 |
|
| 34 |
INSTALLATION: |
| 35 |
Check that your kernel supports shared memory and semaphores. |
| 36 |
A quick way to check is to build buffer and run it. |
| 37 |
If it says "couldn't create shared memory segment" you probably |
| 38 |
need to reconfigure and rebuild your kernel. |
| 39 |
|
| 40 |
To install edit the Makefile and tailor the variables to |
| 41 |
your local systems. Then type make. |
| 42 |
|
| 43 |
DISCLAIMER: |
| 44 |
This package is under the GNU GENERAL PUBLIC LICENSE! |
| 45 |
In addtion under NO circumstances can I, or Imperial College, |
| 46 |
be held liable for any event caused by the running or storing |
| 47 |
of this program or its documentation. |
| 48 |
|
| 49 |
Lee McLoughlin. Phone: +44 171 594 8388 |
| 50 |
IC-Parc, William Penney Lab, Fax: +44 171 594 8449 |
| 51 |
Imperial College, London, SW7 2BZ, UK Email: [email protected] |