| 1 |
#################### |
| 2 |
# Read Disk Sector # |
| 3 |
#################### |
| 4 |
|
| 5 |
System programming: |
| 6 |
------------------- |
| 7 |
|
| 8 |
(Int 13h, ah=2) |
| 9 |
in 1f7 until BSY cleared |
| 10 |
out 1f2, AL # number of sectors |
| 11 |
out 1f3, cl (bits 0-5) # starting sector number |
| 12 |
out 1f4, ch # cylinder number bits 0..7, 0 based |
| 13 |
out 1f5, cl (bits 6,7) & dh (bits 6,7) # cyl, bits 8..9, 10..11 |
| 14 |
out 1f6, dh (bits 0..3) --> bits 0..3 # head number |
| 15 |
dh (bits 4..5) --> ??? # head number |
| 16 |
dl (bit 0) --> bit 4 # drive number |
| 17 |
out 1f7, 0x20 # read sectors command normal |
| 18 |
|
| 19 |
|
| 20 |
|
| 21 |
Drive response: |
| 22 |
--------------- |
| 23 |
|
| 24 |
* drive sets the busy bit in Status Reg to 1 |
| 25 |
* if command parameters are wrong: |
| 26 |
> drive sets the aborted-command bit in the Error register and |
| 27 |
error bit in the Status register to 1. |
| 28 |
> Drive also sets the busy bit in the Status register to 0. |
| 29 |
> Drive then generates an interrupt to the system. |
| 30 |
* else: |
| 31 |
> drive executes an implied seek to desired track and |
| 32 |
reads sectors into sector buffer |
| 33 |
> when sector buffer is filled and the data is ready to be |
| 34 |
transferred, the drive sets the data-request bit to 1, sets |
| 35 |
the busy bit to 0, and generates an interrupt. |
| 36 |
> on a single-sector transfer, after the system has transferred |
| 37 |
the data, the drive sets the data-request bit and the busy bit to 0. |
| 38 |
> on a multiple-sector transfer, after the system has transferred |
| 39 |
the first sector of data, the drive sets the data-request bit to 0, |
| 40 |
and the busy bit to 1. When each subsequent sector is ready to be |
| 41 |
transferred, the drive sets the data-request bit to 1, the busy bit to 0, |
| 42 |
and generates an interrupt. When the system has tranferred the last sector, |
| 43 |
the drive sets the data-request bit and busy bit to 0. |
| 44 |
|