| 1 |
# Copyright (C) 1993-2020 Free Software Foundation, Inc. |
| 2 |
# |
| 3 |
# This file is part of the GNU Binutils. |
| 4 |
# |
| 5 |
# This file is free software; you can redistribute it and/or modify |
| 6 |
# it under the terms of the GNU General Public License as published by |
| 7 |
# the Free Software Foundation; either version 3 of the License, or |
| 8 |
# (at your option) any later version. |
| 9 |
# |
| 10 |
# This program is distributed in the hope that it will be useful, |
| 11 |
# but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 |
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 |
# GNU General Public License for more details. |
| 14 |
# |
| 15 |
# You should have received a copy of the GNU General Public License |
| 16 |
# along with this program; if not, write to the Free Software |
| 17 |
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| 18 |
# MA 02110-1301, USA. |
| 19 |
|
| 20 |
# True if the object format is known to be ELF. |
| 21 |
# |
| 22 |
proc is_elf_format {} { |
| 23 |
# config.sub for these targets curiously transforms a target doublet |
| 24 |
# ending in -elf to -none. eg. m68hc12-elf to m68hc12-unknown-none |
| 25 |
# They are always elf. |
| 26 |
if { [istarget m68hc1*-*] || [istarget s12z*-*] || [istarget xgate-*] } { |
| 27 |
return 1; |
| 28 |
} |
| 29 |
# vxworks (and windiss) excluded due to number of ELF tests that need |
| 30 |
# modifying to pass on those targets. |
| 31 |
# && ![istarget *-*-vxworks*] |
| 32 |
# && ![istarget *-*-windiss*] |
| 33 |
|
| 34 |
if { ![istarget *-*-chorus*] |
| 35 |
&& ![istarget *-*-cloudabi*] |
| 36 |
&& ![istarget *-*-eabi*] |
| 37 |
&& ![istarget *-*-*elf*] |
| 38 |
&& ![istarget *-*-*freebsd*] |
| 39 |
&& ![istarget *-*-fuchsia*] |
| 40 |
&& ![istarget *-*-gnu*] |
| 41 |
&& ![istarget *-*-irix5*] |
| 42 |
&& ![istarget *-*-irix6*] |
| 43 |
&& ![istarget *-*-kaos*] |
| 44 |
&& ![istarget *-*-*linux*] |
| 45 |
&& ![istarget *-*-lynxos*] |
| 46 |
&& ![istarget *-*-nacl*] |
| 47 |
&& ![istarget *-*-netbsd*] |
| 48 |
&& ![istarget *-*-nto*] |
| 49 |
&& ![istarget *-*-openbsd*] |
| 50 |
&& ![istarget *-*-rtems*] |
| 51 |
&& ![istarget *-*-solaris2*] |
| 52 |
&& ![istarget *-*-sysv4*] |
| 53 |
&& ![istarget *-*-unixware*] |
| 54 |
&& ![istarget *-*-wasm32*] |
| 55 |
&& ![istarget avr-*-*] |
| 56 |
&& ![istarget hppa*64*-*-hpux*] |
| 57 |
&& ![istarget ia64-*-hpux*] } { |
| 58 |
return 0 |
| 59 |
} |
| 60 |
|
| 61 |
if { [istarget *-*-linux*ecoff*] |
| 62 |
|| [istarget *-*-rtemscoff*] } { |
| 63 |
return 0 |
| 64 |
} |
| 65 |
|
| 66 |
if { ![istarget *-*-netbsdelf*] |
| 67 |
&& ( [istarget vax-*-netbsd*] |
| 68 |
|| [istarget ns32k-*-netbsd*]) } { |
| 69 |
return 0 |
| 70 |
} |
| 71 |
|
| 72 |
if { [istarget arm-*-openbsd*] |
| 73 |
|| [istarget ns32k-*-openbsd*] |
| 74 |
|| [istarget vax-*-openbsd*] } { |
| 75 |
return 0 |
| 76 |
} |
| 77 |
|
| 78 |
return 1 |
| 79 |
} |
| 80 |
|
| 81 |
# True if the object format is known to be a.out. |
| 82 |
# |
| 83 |
proc is_aout_format {} { |
| 84 |
if { [istarget *-*-*aout*] |
| 85 |
|| [istarget *-*-bsd*] |
| 86 |
|| [istarget *-*-msdos*] |
| 87 |
|| [istarget ns32k-*-*] |
| 88 |
|| [istarget pdp11-*-*] |
| 89 |
|| [istarget vax-*-netbsd] } { |
| 90 |
return 1 |
| 91 |
} |
| 92 |
return 0 |
| 93 |
} |
| 94 |
|
| 95 |
# True if the object format is known to be PE COFF. |
| 96 |
# |
| 97 |
proc is_pecoff_format {} { |
| 98 |
if { [istarget *-*-beospe*] |
| 99 |
|| [istarget *-*-cegcc*] |
| 100 |
|| [istarget *-*-cygwin*] |
| 101 |
|| [istarget *-*-interix*] |
| 102 |
|| [istarget *-*-mingw*] |
| 103 |
|| [istarget *-*-netbsdpe*] |
| 104 |
|| [istarget *-*-pe*] |
| 105 |
|| [istarget *-*-winnt*] } { |
| 106 |
return 1 |
| 107 |
} |
| 108 |
return 0 |
| 109 |
} |
| 110 |
|
| 111 |
proc is_som_format {} { |
| 112 |
if { ![istarget hppa*-*-*] || [istarget hppa*64*-*-*] } { |
| 113 |
return 0; |
| 114 |
} |
| 115 |
if { [istarget *-*-osf*] \ |
| 116 |
|| [istarget {*-*-h[ip]ux*}] \ |
| 117 |
|| [istarget *-*-mpeix*] \ |
| 118 |
|| [istarget *-*-bsd*] } { |
| 119 |
return 1; |
| 120 |
} |
| 121 |
return 0; |
| 122 |
} |
| 123 |
|
| 124 |
# True if the object format is known to be 64-bit ELF. |
| 125 |
# |
| 126 |
proc is_elf64 { binary_file } { |
| 127 |
global READELF |
| 128 |
global READELFFLAGS |
| 129 |
|
| 130 |
set tmpfile [file dirname $binary_file]/readelf.out |
| 131 |
set readelf_size "" |
| 132 |
catch "exec $READELF $READELFFLAGS -h $binary_file > $tmpfile" got |
| 133 |
|
| 134 |
if ![string match "" $got] then { |
| 135 |
return 0 |
| 136 |
} |
| 137 |
|
| 138 |
if { ![regexp "\n\[ \]*Class:\[ \]*ELF(\[0-9\]+)\n" \ |
| 139 |
[file_contents $tmpfile] nil readelf_size] } { |
| 140 |
return 0 |
| 141 |
} |
| 142 |
|
| 143 |
if { $readelf_size == "64" } { |
| 144 |
return 1 |
| 145 |
} |
| 146 |
|
| 147 |
return 0 |
| 148 |
} |
| 149 |
|
| 150 |
# True if the object format is known to use RELA relocations. |
| 151 |
# |
| 152 |
proc is_rela { binary_file } { |
| 153 |
global READELF |
| 154 |
global READELFFLAGS |
| 155 |
|
| 156 |
set tmpfile [file dirname $binary_file]/readelf.out |
| 157 |
catch "exec $READELF $READELFFLAGS -S $binary_file > $tmpfile" got |
| 158 |
|
| 159 |
if ![string match "" $got] then { |
| 160 |
return 0 |
| 161 |
} |
| 162 |
|
| 163 |
if { ![regexp "RELA" [file_contents $tmpfile]] } { |
| 164 |
return 0 |
| 165 |
} |
| 166 |
|
| 167 |
return 1 |
| 168 |
} |
| 169 |
|
| 170 |
# True if the target matches TARGET, specified as a TCL procedure if |
| 171 |
# in square brackets or as machine triplet otherwise. |
| 172 |
# |
| 173 |
proc match_target { target } { |
| 174 |
if [regexp {^!?\[.*\]$} $target] { |
| 175 |
return $target |
| 176 |
} else { |
| 177 |
return [istarget $target] |
| 178 |
} |
| 179 |
} |
| 180 |
|
| 181 |
# True if the ELF target supports setting the ELF header OSABI field |
| 182 |
# to ELFOSABI_GNU or ELFOSABI_FREEBSD, a requirement for STT_GNU_IFUNC |
| 183 |
# symbol and SHF_GNU_MBIND section support. |
| 184 |
# |
| 185 |
# This generally depends on the target OS only, however there are a |
| 186 |
# number of exceptions for bare metal targets as follows. The MSP430 |
| 187 |
# and Visium targets set OSABI to ELFOSABI_STANDALONE. Likewise |
| 188 |
# non-EABI ARM targets set OSABI to ELFOSABI_ARM |
| 189 |
# |
| 190 |
# Note that some TI C6X targets use ELFOSABI_C6000_* but one doesn't, |
| 191 |
# so we don't try to sort out tic6x here. (The effect is that linker |
| 192 |
# testcases will generally need to exclude tic6x or use a -m option.) |
| 193 |
# |
| 194 |
proc supports_gnu_osabi {} { |
| 195 |
if { [istarget *-*-gnu*] |
| 196 |
|| [istarget *-*-linux*] |
| 197 |
|| [istarget *-*-nacl*] |
| 198 |
|| ( [istarget *-*-*bsd*] && ![istarget arm*-*-netbsd*] ) |
| 199 |
|| [istarget *-*-symbianelf] |
| 200 |
|| [istarget *-*-lynxos] |
| 201 |
|| ( [istarget *-*-nto*] && ![istarget arm*-*-*] ) |
| 202 |
|| [istarget *-*-irix*] |
| 203 |
|| [istarget *-*-*eabi*] |
| 204 |
|| [istarget *-*-rtems*] } { |
| 205 |
return 1 |
| 206 |
} |
| 207 |
if { [istarget "wasm32*-*-*"] } { |
| 208 |
return 1 |
| 209 |
} |
| 210 |
if { ![istarget "*-*-elf*"] } { |
| 211 |
return 0 |
| 212 |
} |
| 213 |
if { [istarget "arm*-*-*"] |
| 214 |
|| [istarget "msp430-*-*"] |
| 215 |
|| [istarget "visium-*-*"] } { |
| 216 |
return 0 |
| 217 |
} |
| 218 |
return 1 |
| 219 |
} |
| 220 |
|
| 221 |
# Return true if target uses the generic_link_hash_table linker. |
| 222 |
proc is_generic { } { |
| 223 |
if { [istarget "d30v-*-*"] |
| 224 |
|| [istarget "dlx-*-*"] |
| 225 |
|| [istarget "pj*-*-*"] |
| 226 |
|| [istarget "s12z-*-*"] |
| 227 |
|| [istarget "xgate-*-*"] } { |
| 228 |
return 1 |
| 229 |
} |
| 230 |
return 0 |
| 231 |
} |
| 232 |
|
| 233 |
# True if the ELF target supports STB_GNU_UNIQUE. |
| 234 |
# |
| 235 |
# This require ELFOSABI_GNU, and `bfd_elf_final_link'. |
| 236 |
# |
| 237 |
proc supports_gnu_unique {} { |
| 238 |
if { [istarget *-*-freebsd*] } { |
| 239 |
return 0 |
| 240 |
} |
| 241 |
if { [supports_gnu_osabi] && ![is_generic] } { |
| 242 |
return 1 |
| 243 |
} |
| 244 |
return 0 |
| 245 |
} |
| 246 |
|
| 247 |
# True for targets that do not sort .symtab as per the ELF standard. |
| 248 |
# ie. any that have mips_elf32_be_vec, mips_elf32_le_vec, |
| 249 |
# mips_elf32_n_be_vec or mips_elf32_n_le_vec as the primary bfd target |
| 250 |
# vector in config.bfd. When syncing with config.bfd, don't forget that |
| 251 |
# earlier case-matches trump later ones. |
| 252 |
proc is_bad_symtab {} { |
| 253 |
if { ![istarget "mips*-*-*"] } { |
| 254 |
return 0; |
| 255 |
} |
| 256 |
if { [istarget "*-*-chorus*"] |
| 257 |
|| [istarget "*-*-irix5*"] |
| 258 |
|| [istarget "*-*-irix6*"] |
| 259 |
|| [istarget "*-*-none"] |
| 260 |
|| [istarget "*-*-rtems*"] |
| 261 |
|| [istarget "*-*-windiss"] } { |
| 262 |
return 1; |
| 263 |
} |
| 264 |
if { [istarget "*-*-elf*"] |
| 265 |
&& ![istarget "*-sde-*"] |
| 266 |
&& ![istarget "*-mti-*"] |
| 267 |
&& ![istarget "*-img-*"] } { |
| 268 |
return 1; |
| 269 |
} |
| 270 |
if { [istarget "*-*-openbsd*"] |
| 271 |
&& ![istarget "mips64*-*-*"] } { |
| 272 |
return 1; |
| 273 |
} |
| 274 |
return 0; |
| 275 |
} |
| 276 |
|
| 277 |
# Returns true if -shared is supported on the target |
| 278 |
|
| 279 |
proc check_shared_lib_support { } { |
| 280 |
global shared_available_saved |
| 281 |
global ld |
| 282 |
|
| 283 |
if {![info exists shared_available_saved]} { |
| 284 |
set ld_output [remote_exec host $ld "-shared"] |
| 285 |
if { [ string first "not supported" $ld_output ] >= 0 } { |
| 286 |
set shared_available_saved 0 |
| 287 |
} else { |
| 288 |
set shared_available_saved 1 |
| 289 |
} |
| 290 |
} |
| 291 |
return $shared_available_saved |
| 292 |
} |
| 293 |
|
| 294 |
# Returns true if -pie is supported on the target |
| 295 |
|
| 296 |
proc check_pie_support { } { |
| 297 |
global pie_available_saved |
| 298 |
global ld |
| 299 |
|
| 300 |
if {![info exists pie_available_saved]} { |
| 301 |
set ld_output [remote_exec host $ld "-pie"] |
| 302 |
if { [ string first "not supported" $ld_output ] >= 0 } { |
| 303 |
set pie_available_saved 0 |
| 304 |
} else { |
| 305 |
set pie_available_saved 1 |
| 306 |
} |
| 307 |
} |
| 308 |
return $pie_available_saved |
| 309 |
} |
| 310 |
|
| 311 |
proc check_relro_support { } { |
| 312 |
global relro_available_saved |
| 313 |
global ld |
| 314 |
|
| 315 |
if {![info exists relro_available_saved]} { |
| 316 |
remote_file host delete norelro |
| 317 |
set ld_output [remote_exec host $ld "-z norelro"] |
| 318 |
if { [string first "not supported" $ld_output] >= 0 |
| 319 |
|| [string first "unrecognized option" $ld_output] >= 0 |
| 320 |
|| [string first "-z norelro ignored" $ld_output] >= 0 |
| 321 |
|| [string first "cannot find norelro" $ld_output] >= 0 } { |
| 322 |
set relro_available_saved 0 |
| 323 |
} else { |
| 324 |
set relro_available_saved 1 |
| 325 |
} |
| 326 |
} |
| 327 |
return $relro_available_saved |
| 328 |
} |
| 329 |
|
| 330 |
# Compare two files line-by-line. FILE_1 is the actual output and FILE_2 |
| 331 |
# is the expected output. Ignore blank lines in either file. |
| 332 |
# |
| 333 |
# FILE_2 is a series of regexps, comments and # directives. The directives |
| 334 |
# are: |
| 335 |
# |
| 336 |
# #pass |
| 337 |
# Treat the test as a PASS if everything up till this point has |
| 338 |
# matched. Ignore any remaining lines in either FILE_1 or FILE_2. |
| 339 |
# |
| 340 |
# #failif |
| 341 |
# Reverse the sense of the test: expect differences to exist. |
| 342 |
# |
| 343 |
# #... |
| 344 |
# REGEXP |
| 345 |
# Skip all lines in FILE_1 until the first that matches REGEXP. |
| 346 |
# |
| 347 |
# #?REGEXP |
| 348 |
# Optionally match REGEXP against line from FILE_1. If the REGEXP |
| 349 |
# does not match then the next line from FILE_2 is tried. |
| 350 |
# |
| 351 |
# Other # lines are comments. Regexp lines starting with the `!' character |
| 352 |
# specify inverse matching (use `\!' for literal matching against a leading |
| 353 |
# `!'). Skip empty lines in both files. |
| 354 |
# |
| 355 |
# The first optional argument is a list of regexp substitutions of the form: |
| 356 |
# |
| 357 |
# EXP1 SUBSPEC1 EXP2 SUBSPEC2 ... |
| 358 |
# |
| 359 |
# This tells the function to apply each regexp substitution EXPi->SUBSPECi |
| 360 |
# in order to every line of FILE_2. |
| 361 |
# |
| 362 |
# Return nonzero if differences exist. |
| 363 |
proc regexp_diff { file_1 file_2 args } { |
| 364 |
set eof -1 |
| 365 |
set end_1 0 |
| 366 |
set end_2 0 |
| 367 |
set differences 0 |
| 368 |
set diff_pass 0 |
| 369 |
set fail_if_match 0 |
| 370 |
set ref_subst "" |
| 371 |
if { [llength $args] > 0 } { |
| 372 |
set ref_subst [lindex $args 0] |
| 373 |
} |
| 374 |
if { [llength $args] > 1 } { |
| 375 |
perror "Too many arguments to regexp_diff" |
| 376 |
return 1 |
| 377 |
} |
| 378 |
|
| 379 |
if [file exists $file_1] then { |
| 380 |
set file_a [open $file_1 r] |
| 381 |
} else { |
| 382 |
perror "$file_1 doesn't exist" |
| 383 |
return 1 |
| 384 |
} |
| 385 |
|
| 386 |
if [file exists $file_2] then { |
| 387 |
set file_b [open $file_2 r] |
| 388 |
} else { |
| 389 |
perror "$file_2 doesn't exist" |
| 390 |
close $file_a |
| 391 |
return 1 |
| 392 |
} |
| 393 |
|
| 394 |
verbose " Regexp-diff'ing: $file_1 $file_2" 2 |
| 395 |
|
| 396 |
while { 1 } { |
| 397 |
set line_a "" |
| 398 |
set line_b "" |
| 399 |
while { [string length $line_a] == 0 } { |
| 400 |
# Ignore blank line in FILE_1. |
| 401 |
if { [gets $file_a line_a] == $eof } { |
| 402 |
set end_1 1 |
| 403 |
break |
| 404 |
} |
| 405 |
} |
| 406 |
while { [string length $line_b] == 0 || [string match "#*" $line_b] } { |
| 407 |
if { [string match "#pass" $line_b] } { |
| 408 |
set end_2 1 |
| 409 |
set diff_pass 1 |
| 410 |
break |
| 411 |
} elseif { [string match "#failif" $line_b] } { |
| 412 |
send_log "fail if no difference\n" |
| 413 |
verbose "fail if no difference" 3 |
| 414 |
set fail_if_match 1 |
| 415 |
} elseif { [string match "#..." $line_b] } { |
| 416 |
if { [gets $file_b line_b] == $eof } { |
| 417 |
set end_2 1 |
| 418 |
set diff_pass 1 |
| 419 |
break |
| 420 |
} |
| 421 |
set negated [expr { [string index $line_b 0] == "!" }] |
| 422 |
set line_bx [string range $line_b $negated end] |
| 423 |
set n [expr { $negated ? "! " : "" }] |
| 424 |
# Substitute on the reference. |
| 425 |
foreach {name value} $ref_subst { |
| 426 |
regsub -- $name $line_bx $value line_bx |
| 427 |
} |
| 428 |
verbose "looking for $n\"^$line_bx$\"" 3 |
| 429 |
while { [expr [regexp "^$line_bx$" "$line_a"] == $negated] } { |
| 430 |
verbose "skipping \"$line_a\"" 3 |
| 431 |
if { [gets $file_a line_a] == $eof } { |
| 432 |
set end_1 1 |
| 433 |
break |
| 434 |
} |
| 435 |
} |
| 436 |
break |
| 437 |
} elseif { [string match "#\\?*" $line_b] } { |
| 438 |
if { ! $end_1 } { |
| 439 |
set line_b [string replace $line_b 0 1] |
| 440 |
set negated [expr { [string index $line_b 0] == "!" }] |
| 441 |
set line_bx [string range $line_b $negated end] |
| 442 |
set n [expr { $negated ? "! " : "" }] |
| 443 |
# Substitute on the reference. |
| 444 |
foreach {name value} $ref_subst { |
| 445 |
regsub -- $name $line_bx $value line_bx |
| 446 |
} |
| 447 |
verbose "optional match for $n\"^$line_bx$\"" 3 |
| 448 |
if { [expr [regexp "^$line_bx$" "$line_a"] != $negated] } { |
| 449 |
break |
| 450 |
} |
| 451 |
} |
| 452 |
} |
| 453 |
if { [gets $file_b line_b] == $eof } { |
| 454 |
set end_2 1 |
| 455 |
break |
| 456 |
} |
| 457 |
} |
| 458 |
|
| 459 |
if { $diff_pass } { |
| 460 |
break |
| 461 |
} elseif { $end_1 && $end_2 } { |
| 462 |
break |
| 463 |
} elseif { $end_1 } { |
| 464 |
send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n" |
| 465 |
verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3 |
| 466 |
set differences 1 |
| 467 |
break |
| 468 |
} elseif { $end_2 } { |
| 469 |
send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" |
| 470 |
verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3 |
| 471 |
set differences 1 |
| 472 |
break |
| 473 |
} else { |
| 474 |
set negated [expr { [string index $line_b 0] == "!" }] |
| 475 |
set line_bx [string range $line_b $negated end] |
| 476 |
set n [expr { $negated ? "! " : "" }] |
| 477 |
set s [expr { $negated ? " " : "" }] |
| 478 |
# Substitute on the reference. |
| 479 |
foreach {name value} $ref_subst { |
| 480 |
regsub -- $name $line_bx $value line_bx |
| 481 |
} |
| 482 |
verbose "regexp $n\"^$line_bx$\"\nline \"$line_a\"" 3 |
| 483 |
if { [expr [regexp "^$line_bx$" "$line_a"] == $negated] } { |
| 484 |
send_log "regexp_diff match failure\n" |
| 485 |
send_log "regexp $n\"^$line_bx$\"\nline $s\"$line_a\"\n" |
| 486 |
verbose "regexp_diff match failure\n" 3 |
| 487 |
set differences 1 |
| 488 |
} |
| 489 |
} |
| 490 |
} |
| 491 |
|
| 492 |
if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } { |
| 493 |
send_log "$file_1 and $file_2 are different lengths\n" |
| 494 |
verbose "$file_1 and $file_2 are different lengths" 3 |
| 495 |
set differences 1 |
| 496 |
} |
| 497 |
|
| 498 |
if { $fail_if_match } { |
| 499 |
if { $differences == 0 } { |
| 500 |
set differences 1 |
| 501 |
} else { |
| 502 |
set differences 0 |
| 503 |
} |
| 504 |
} |
| 505 |
|
| 506 |
close $file_a |
| 507 |
close $file_b |
| 508 |
|
| 509 |
return $differences |
| 510 |
} |
| 511 |
|
| 512 |
# prune_warnings_extra -- delete extra warnings from TEXT. |
| 513 |
# |
| 514 |
# An example is: |
| 515 |
# ld: warning: /lib64/ld-linux-x86-64.so.2: unsupported GNU_PROPERTY_TYPE (5) type : 0xc0010001 |
| 516 |
proc prune_warnings_extra { text } { |
| 517 |
global experimental |
| 518 |
# Warnings are only pruned from non-experimental code (ie code not |
| 519 |
# on a release branch). For experimental code we want the warnings |
| 520 |
# as they indicate that the sources need to be updated to recognise |
| 521 |
# the new properties. |
| 522 |
if { "$experimental" == "false" } { |
| 523 |
# The "\\1" is to try to preserve a "\n" but only if necessary. |
| 524 |
regsub -all "(^|\n)(\[^\n\]*: warning:\[^\n\]*unsupported GNU_PROPERTY_TYPE\[^\n\]*\n?)+" $text "\\1" text |
| 525 |
} |
| 526 |
# PR binutils/23898: It is OK to have gaps in build notes. |
| 527 |
regsub -all "(^|\n)(\[^\n\]*: Warning: Gap in build notes detected from\[^\n\]*\n?)+" $text "\\1" text |
| 528 |
return $text |
| 529 |
} |
| 530 |
|
| 531 |
# This definition is taken from an unreleased version of DejaGnu. Once |
| 532 |
# that version gets released, and has been out in the world for a few |
| 533 |
# months at least, it may be safe to delete this copy. |
| 534 |
if ![string length [info proc prune_warnings]] { |
| 535 |
# |
| 536 |
# prune_warnings -- delete various system verbosities from TEXT |
| 537 |
# |
| 538 |
# An example is: |
| 539 |
# ld.so: warning: /usr/lib/libc.so.1.8.1 has older revision than expected 9 |
| 540 |
# |
| 541 |
# Sites with particular verbose os's may wish to override this in site.exp. |
| 542 |
# |
| 543 |
proc prune_warnings { text } { |
| 544 |
# This is from sun4's. Do it for all machines for now. |
| 545 |
# The "\\1" is to try to preserve a "\n" but only if necessary. |
| 546 |
regsub -all "(^|\n)(ld.so: warning:\[^\n\]*\n?)+" $text "\\1" text |
| 547 |
# It might be tempting to get carried away and delete blank lines, etc. |
| 548 |
# Just delete *exactly* what we're ask to, and that's it. |
| 549 |
set text [prune_warnings_extra $text] |
| 550 |
return $text |
| 551 |
} |
| 552 |
} elseif { [info procs saved-prune_warnings] == [list] } { |
| 553 |
rename prune_warnings saved-prune_warnings |
| 554 |
proc prune_warnings { text } { |
| 555 |
set text [saved-prune_warnings $text] |
| 556 |
set text [prune_warnings_extra $text] |
| 557 |
return $text |
| 558 |
} |
| 559 |
} |
| 560 |
|
| 561 |
# run_dump_test FILE (optional:) EXTRA_OPTIONS |
| 562 |
# |
| 563 |
# Assemble a .s file, then run some utility on it and check the output. |
| 564 |
# |
| 565 |
# There should be an assembly language file named FILE.s in the test |
| 566 |
# suite directory, and a pattern file called FILE.d. run_dump_test |
| 567 |
# will assemble FILE.s, optionally run objcopy on the object file, |
| 568 |
# optionally run ld, optionally run another objcopy, optionally run |
| 569 |
# another tool under test specified by PROG, then run a dump tool like |
| 570 |
# addr2line, nm, objdump, readelf or size on the object file to produce |
| 571 |
# textual output, and then analyze that with regexps. |
| 572 |
# The FILE.d file specifies what program to run, and what to expect in |
| 573 |
# its output. |
| 574 |
# |
| 575 |
# The FILE.d file begins with zero or more option lines, which specify |
| 576 |
# flags to pass to the assembler, the program to run to dump the |
| 577 |
# assembler's output, and the options it wants. The option lines have |
| 578 |
# the syntax: |
| 579 |
# |
| 580 |
# # OPTION: VALUE |
| 581 |
# |
| 582 |
# OPTION is the name of some option, like "name" or "objdump", and |
| 583 |
# VALUE is OPTION's value. The valid options are described below. |
| 584 |
# Whitespace is ignored everywhere, except within VALUE. The option |
| 585 |
# list ends with the first line that doesn't match the above syntax. |
| 586 |
# However, a line within the options that begins with a #, but doesn't |
| 587 |
# have a recognizable option name followed by a colon, is considered a |
| 588 |
# comment and entirely ignored. |
| 589 |
# |
| 590 |
# The optional EXTRA_OPTIONS argument to `run_dump_test' is a list of |
| 591 |
# two-element lists. The first element of each is an option name, and |
| 592 |
# the second additional arguments to be added on to the end of the |
| 593 |
# option list as given in FILE.d. (If omitted, no additional options |
| 594 |
# are added.) |
| 595 |
# |
| 596 |
# The interesting options are: |
| 597 |
# |
| 598 |
# name: TEST-NAME |
| 599 |
# The name of this test, passed to DejaGNU's `pass' and `fail' |
| 600 |
# commands. If omitted, this defaults to FILE, the root of the |
| 601 |
# .s and .d files' names. |
| 602 |
# |
| 603 |
# as: FLAGS |
| 604 |
# When assembling, pass FLAGS to the assembler. |
| 605 |
# If assembling several files, you can pass different assembler |
| 606 |
# options in the "source" directives. See below. |
| 607 |
# Multiple instances of this directive tells run_dump_test to run the test |
| 608 |
# multiple times -- one time with each set of flags provided. |
| 609 |
# Each instance will run exactly as a file with a single "as" line, it is |
| 610 |
# not possible to condition any behaviour on which set of "as" flags is |
| 611 |
# used. That means that the "source" specific options are appended to |
| 612 |
# the "as" flags for their corresponding files, and any extra processing |
| 613 |
# (e.g. with "ld" and "objcopy") is repeated for each test. |
| 614 |
# |
| 615 |
# ld: FLAGS |
| 616 |
# Link assembled files using FLAGS, in the order of the "source" |
| 617 |
# directives, when using multiple files. |
| 618 |
# |
| 619 |
# ld_after_inputfiles: FLAGS |
| 620 |
# Similar to "ld", but put FLAGS after all input files. |
| 621 |
# |
| 622 |
# objcopy_objects: FLAGS |
| 623 |
# Run objcopy with the specified flags after assembling any source |
| 624 |
# that has the special marker RUN_OBJCOPY in the source specific |
| 625 |
# flags. |
| 626 |
# |
| 627 |
# objcopy_linked_file: FLAGS |
| 628 |
# Run objcopy on the linked file with the specified flags. |
| 629 |
# This lets you transform the linked file using objcopy, before the |
| 630 |
# result is analyzed by an analyzer program specified below. |
| 631 |
# |
| 632 |
# PROG: PROGRAM-NAME |
| 633 |
# The name of a program under test, to run to modify or analyze the |
| 634 |
# .o file produced by the assembler. Recognised names are: ar, |
| 635 |
# elfedit, nm, objcopy, ranlib, strings, and strip. |
| 636 |
# |
| 637 |
# DUMPPROG: PROGRAM-NAME |
| 638 |
# The name of the program to run to analyze the file produced |
| 639 |
# by the assembler or the linker. This can be omitted; |
| 640 |
# run_dump_test will guess which program to run from which of |
| 641 |
# the flags options below is present. |
| 642 |
# |
| 643 |
# addr2line: FLAGS |
| 644 |
# nm: FLAGS |
| 645 |
# objdump: FLAGS |
| 646 |
# readelf: FLAGS |
| 647 |
# size: FLAGS |
| 648 |
# Use the specified program to analyze the output file, and pass it |
| 649 |
# FLAGS, in addition to the output name. Note that they are run |
| 650 |
# with LC_ALL=C in the environment to give consistent sorting of |
| 651 |
# symbols. If no FLAGS are needed then you can use: |
| 652 |
# DUMPPROG: [nm objdump readelf addr2line] |
| 653 |
# instead, or just pass a flag that happens to be the default. |
| 654 |
# If objdump is the dump tool and we're not dumping binary, nor |
| 655 |
# have run ld, then the standard section names (.text, .data and |
| 656 |
# .bss) are replaced by target ones if any (eg. rx-elf uses "P" |
| 657 |
# instead of .text). The substition is done for both the |
| 658 |
# objdump options (eg: "-j .text" is replaced by "-j P") and the |
| 659 |
# reference file. |
| 660 |
# |
| 661 |
# source: SOURCE [FLAGS] |
| 662 |
# Assemble the file SOURCE.s using the flags in the "as" directive |
| 663 |
# and the (optional) FLAGS. If omitted, the source defaults to |
| 664 |
# FILE.s. |
| 665 |
# This is useful if several .d files want to share a .s file. |
| 666 |
# More than one "source" directive can be given, which is useful |
| 667 |
# when testing linking. |
| 668 |
# |
| 669 |
# dump: DUMP |
| 670 |
# Match against DUMP.d. If omitted, this defaults to FILE.d. This |
| 671 |
# is useful if several .d files differ by options only. Options are |
| 672 |
# always read from FILE.d. |
| 673 |
# |
| 674 |
# target: GLOB|PROC ... |
| 675 |
# Run this test only on a specified list of targets. More precisely, |
| 676 |
# in the space-separated list each glob is passed to "istarget" and |
| 677 |
# each proc is called as a TCL procedure. List items are interpreted |
| 678 |
# such that procs are denoted by surrounding square brackets, and any |
| 679 |
# other items are consired globs. If the call evaluates true for any |
| 680 |
# of them, the test will be run, otherwise it will be marked |
| 681 |
# unsupported. |
| 682 |
# |
| 683 |
# notarget: GLOB|PROC ... |
| 684 |
# Do not run this test on a specified list of targets. Again, each |
| 685 |
# glob in the space-separated list is passed to "istarget" and each |
| 686 |
# proc is called as a TCL procedure, and the test is run if it |
| 687 |
# evaluates *false* for *all* of them. Otherwise it will be marked |
| 688 |
# unsupported. |
| 689 |
# |
| 690 |
# alltargets: GLOB|PROC ... |
| 691 |
# Run this test on a specified list of targets. Again, each |
| 692 |
# glob in the space-separated list is passed to "istarget" and each |
| 693 |
# proc is called as a TCL procedure, and the test is run if it |
| 694 |
# evaluates *true* for *all* of them. Otherwise it will be marked |
| 695 |
# unsupported. |
| 696 |
# |
| 697 |
# skip: GLOB|PROC ... |
| 698 |
# anyskip: GLOB|PROC ... |
| 699 |
# noskip: GLOB|PROC ... |
| 700 |
# These are exactly the same as "notarget", "alltargets" and |
| 701 |
# "target" respectively, except that they do nothing at all if the |
| 702 |
# check fails. They should only be used in groups, to construct a |
| 703 |
# single test which is run on all targets but with variant options |
| 704 |
# or expected output on some targets. (For example, see |
| 705 |
# gas/arm/inst.d and gas/arm/wince_inst.d.) |
| 706 |
# |
| 707 |
# xfail: GLOB|PROC ... |
| 708 |
# Run this test and it is is expected to fail on a specified list |
| 709 |
# of targets. |
| 710 |
# |
| 711 |
# error: REGEX |
| 712 |
# An error with message matching REGEX must be emitted for the test |
| 713 |
# to pass. The DUMPPROG, addr2line, nm, objdump, readelf and size |
| 714 |
# options have no meaning and need not supplied if this is present. |
| 715 |
# Multiple "error" directives append to the expected error message. |
| 716 |
# |
| 717 |
# error_output: FILE |
| 718 |
# Means the same as 'error', except the regular expression lines |
| 719 |
# are contains in FILE. |
| 720 |
# |
| 721 |
# warning: REGEX |
| 722 |
# Expect a warning matching REGEX. It is an error to issue |
| 723 |
# both "error" and "warning". Multiple "warning" directives |
| 724 |
# append to the expected warning message. |
| 725 |
# |
| 726 |
# warning_output: FILE |
| 727 |
# Means the same as 'warning', except the regular expression |
| 728 |
# lines are contains in FILE. |
| 729 |
# |
| 730 |
# map: FILE |
| 731 |
# Adding this option will cause the linker to generate a linker |
| 732 |
# map file, using the -Map=MAPFILE command line option. If |
| 733 |
# there is no -Map=MAPFILE in the 'ld: FLAGS' then one will be |
| 734 |
# added to the linker command line. The contents of the |
| 735 |
# generated MAPFILE are then compared against the regexp lines |
| 736 |
# in FILE using `regexp_diff' (see below for details). |
| 737 |
# |
| 738 |
# section_subst: no |
| 739 |
# Means that the section substitution for objdump is disabled. |
| 740 |
# |
| 741 |
# Each option may occur at most once unless otherwise mentioned. |
| 742 |
# |
| 743 |
# After the option lines come regexp lines. run_dump_test calls |
| 744 |
# regexp_diff to compare the output of the dumping tool against the |
| 745 |
# regexps in FILE.d. |
| 746 |
# |
| 747 |
proc run_dump_test { name {extra_options {}} } { |
| 748 |
global ADDR2LINE ADDR2LINEFLAGS AS ASFLAGS ELFEDIT ELFEDITFLAGS LD LDFLAGS |
| 749 |
global NM NMFLAGS OBJCOPY OBJCOPYFLAGS OBJDUMP OBJDUMPFLAGS |
| 750 |
global READELF READELFFLAGS STRIP STRIPFLAGS |
| 751 |
global copyfile env runtests srcdir subdir verbose |
| 752 |
|
| 753 |
if [string match "*/*" $name] { |
| 754 |
set file $name |
| 755 |
set name [file tail $name] |
| 756 |
} else { |
| 757 |
set file "$srcdir/$subdir/$name" |
| 758 |
} |
| 759 |
|
| 760 |
if ![runtest_file_p $runtests $name] then { |
| 761 |
return |
| 762 |
} |
| 763 |
|
| 764 |
set opt_array [slurp_options "${file}.d"] |
| 765 |
if { $opt_array == -1 } { |
| 766 |
perror "error reading options from $file.d" |
| 767 |
unresolved $subdir/$name |
| 768 |
return |
| 769 |
} |
| 770 |
set dumpfile tmpdir/dump.out |
| 771 |
set run_ld 0 |
| 772 |
set run_objcopy 0 |
| 773 |
set objfile_names {} |
| 774 |
set opts(PROG) {} |
| 775 |
set opts(DUMPPROG) {} |
| 776 |
set opts(addr2line) {} |
| 777 |
set opts(alltargets) {} |
| 778 |
set opts(anyskip) {} |
| 779 |
set opts(ar) {} |
| 780 |
set opts(as) {} |
| 781 |
set as_final_flags {} |
| 782 |
set as_additional_flags {} |
| 783 |
set opts(dump) {} |
| 784 |
set opts(elfedit) {} |
| 785 |
set opts(error) {} |
| 786 |
set opts(error_output) {} |
| 787 |
set opts(ld) {} |
| 788 |
set opts(ld_after_inputfiles) {} |
| 789 |
set opts(map) {} |
| 790 |
set opts(name) {} |
| 791 |
set opts(nm) {} |
| 792 |
set opts(noskip) {} |
| 793 |
set opts(notarget) {} |
| 794 |
set opts(objcopy) {} |
| 795 |
set opts(objcopy_linked_file) {} |
| 796 |
set opts(objcopy_objects) {} |
| 797 |
set opts(objdump) {} |
| 798 |
set opts(ranlib) {} |
| 799 |
set opts(readelf) {} |
| 800 |
set opts(section_subst) {} |
| 801 |
set opts(size) {} |
| 802 |
set opts(strings) {} |
| 803 |
set opts(strip) {} |
| 804 |
set opts(skip) {} |
| 805 |
set opts(source) {} |
| 806 |
set opts(strip) {} |
| 807 |
set opts(target) {} |
| 808 |
set opts(warning) {} |
| 809 |
set opts(warning_output) {} |
| 810 |
set opts(xfail) {} |
| 811 |
|
| 812 |
set in_extra 0 |
| 813 |
foreach i [concat $opt_array {{} {}} $extra_options] { |
| 814 |
set opt_name [lindex $i 0] |
| 815 |
set opt_val [lindex $i 1] |
| 816 |
if { $opt_name == "" } { |
| 817 |
set in_extra 1 |
| 818 |
continue |
| 819 |
} |
| 820 |
if ![info exists opts($opt_name)] { |
| 821 |
perror "unknown option $opt_name in file $file.d" |
| 822 |
unresolved $subdir/$name |
| 823 |
return |
| 824 |
} |
| 825 |
|
| 826 |
# Allow more substitutions, including tcl functions, for as and ld. |
| 827 |
# Not done in general because extra quoting is needed for glob |
| 828 |
# args used for example in binutils-all/remove-relocs-04.d. |
| 829 |
if { $opt_name == "as" || $opt_name == "ld" } { |
| 830 |
set opt_val [subst $opt_val] |
| 831 |
} else { |
| 832 |
# Just substitute $srcdir and $subdir |
| 833 |
regsub -all {\$srcdir} "$opt_val" "$srcdir" opt_val |
| 834 |
regsub -all {\$subdir} "$opt_val" "$subdir" opt_val |
| 835 |
} |
| 836 |
|
| 837 |
switch -- $opt_name { |
| 838 |
xfail {} |
| 839 |
target {} |
| 840 |
alltargets {} |
| 841 |
notarget {} |
| 842 |
skip {} |
| 843 |
anyskip {} |
| 844 |
noskip {} |
| 845 |
warning {} |
| 846 |
error {} |
| 847 |
source { |
| 848 |
# Move any source-specific as-flags to a separate list to |
| 849 |
# simplify processing. |
| 850 |
if { [llength $opt_val] > 1 } { |
| 851 |
lappend asflags [lrange $opt_val 1 end] |
| 852 |
set opt_val [lindex $opt_val 0] |
| 853 |
} else { |
| 854 |
lappend asflags {} |
| 855 |
} |
| 856 |
|
| 857 |
# Create the object file name based on nothing but the source |
| 858 |
# file name. |
| 859 |
set new_objfile \ |
| 860 |
[concat tmpdir/[file rootname [file tail [lindex $opt_val 0]]].o] |
| 861 |
# But, sometimes, we have the exact same source filename in |
| 862 |
# different directories (foo/src.s bar/src.s) which would lead |
| 863 |
# us to try and create two src.o files. We detect this |
| 864 |
# conflict here, and instead create src.o and src1.o. |
| 865 |
set j 0 |
| 866 |
while { [lsearch $objfile_names $new_objfile] != -1 } { |
| 867 |
incr j |
| 868 |
set new_objfile \ |
| 869 |
[concat tmpdir/[file rootname [file tail [lindex $opt_val 0]]]${j}.o] |
| 870 |
} |
| 871 |
lappend objfile_names $new_objfile |
| 872 |
} |
| 873 |
default { |
| 874 |
if { !$in_extra |
| 875 |
&& [string length $opts($opt_name)] |
| 876 |
&& $opt_name != "as" } { |
| 877 |
perror "option $opt_name multiply set in $file.d" |
| 878 |
unresolved $subdir/$name |
| 879 |
return |
| 880 |
} |
| 881 |
|
| 882 |
# A single "#ld:" with no options should do the right thing. |
| 883 |
if { $opt_name == "ld" } { |
| 884 |
set run_ld 1 |
| 885 |
} |
| 886 |
# Likewise objcopy_linked_file. |
| 887 |
if { $opt_name == "objcopy_linked_file" } { |
| 888 |
set run_objcopy 1 |
| 889 |
} |
| 890 |
} |
| 891 |
} |
| 892 |
|
| 893 |
# Append differently whether it's a message (without space) or |
| 894 |
# an option or list (with space). |
| 895 |
switch -- $opt_name { |
| 896 |
warning - |
| 897 |
error { |
| 898 |
append opts($opt_name) $opt_val |
| 899 |
} |
| 900 |
as { |
| 901 |
if { $in_extra } { |
| 902 |
set as_additional_flags [concat $as_additional_flags $opt_val] |
| 903 |
} else { |
| 904 |
lappend opts(as) $opt_val |
| 905 |
} |
| 906 |
} |
| 907 |
default { |
| 908 |
set opts($opt_name) [concat $opts($opt_name) $opt_val] |
| 909 |
} |
| 910 |
} |
| 911 |
} |
| 912 |
|
| 913 |
# Ensure there is something in $opts(as) for the foreach loop below. |
| 914 |
if { [llength $opts(as)] == 0 } { |
| 915 |
set opts(as) [list " "] |
| 916 |
} |
| 917 |
foreach x $opts(as) { |
| 918 |
if { [string length $x] && [string length $as_additional_flags] } { |
| 919 |
append x " " |
| 920 |
} |
| 921 |
append x $as_additional_flags |
| 922 |
regsub {\[big_or_little_endian\]} $x \ |
| 923 |
[big_or_little_endian] x |
| 924 |
lappend as_final_flags $x |
| 925 |
} |
| 926 |
|
| 927 |
regsub {\[big_or_little_endian\]} $opts(ld) \ |
| 928 |
[big_or_little_endian] opts(ld) |
| 929 |
|
| 930 |
if { $opts(name) == "" } { |
| 931 |
set testname "$subdir/$name" |
| 932 |
} else { |
| 933 |
set testname $opts(name) |
| 934 |
} |
| 935 |
|
| 936 |
set err_warn 0 |
| 937 |
foreach opt { warning error warning_output error_output } { |
| 938 |
if { $opts($opt) != "" } { |
| 939 |
if { $err_warn } { |
| 940 |
perror "$testname: bad mix of warning and error test directives" |
| 941 |
unresolved $testname |
| 942 |
return |
| 943 |
} |
| 944 |
set err_warn 1 |
| 945 |
} |
| 946 |
} |
| 947 |
|
| 948 |
# Decide early whether we should run the test for this target. |
| 949 |
if { [llength $opts(noskip)] > 0 } { |
| 950 |
set targmatch 0 |
| 951 |
foreach targ $opts(noskip) { |
| 952 |
if [match_target $targ] { |
| 953 |
set targmatch 1 |
| 954 |
break |
| 955 |
} |
| 956 |
} |
| 957 |
if { $targmatch == 0 } { |
| 958 |
return |
| 959 |
} |
| 960 |
} |
| 961 |
foreach targ $opts(anyskip) { |
| 962 |
if ![match_target $targ] { |
| 963 |
return |
| 964 |
} |
| 965 |
} |
| 966 |
foreach targ $opts(skip) { |
| 967 |
if [match_target $targ] { |
| 968 |
return |
| 969 |
} |
| 970 |
} |
| 971 |
if { [llength $opts(target)] > 0 } { |
| 972 |
set targmatch 0 |
| 973 |
foreach targ $opts(target) { |
| 974 |
if [match_target $targ] { |
| 975 |
set targmatch 1 |
| 976 |
break |
| 977 |
} |
| 978 |
} |
| 979 |
if { $targmatch == 0 } { |
| 980 |
unsupported $testname |
| 981 |
return |
| 982 |
} |
| 983 |
} |
| 984 |
foreach targ $opts(alltargets) { |
| 985 |
if ![match_target $targ] { |
| 986 |
unsupported $testname |
| 987 |
return |
| 988 |
} |
| 989 |
} |
| 990 |
foreach targ $opts(notarget) { |
| 991 |
if [match_target $targ] { |
| 992 |
unsupported $testname |
| 993 |
return |
| 994 |
} |
| 995 |
} |
| 996 |
|
| 997 |
set dumpprogram "" |
| 998 |
# It's meaningless to require an output-testing method when we |
| 999 |
# expect an error. |
| 1000 |
if { $opts(error) == "" && $opts(error_output) == "" } { |
| 1001 |
if { $opts(DUMPPROG) != "" } { |
| 1002 |
switch -- $opts(DUMPPROG) { |
| 1003 |
addr2line { set dumpprogram addr2line } |
| 1004 |
nm { set dumpprogram nm } |
| 1005 |
objdump { set dumpprogram objdump } |
| 1006 |
readelf { set dumpprogram readelf } |
| 1007 |
size { set dumpprogram size } |
| 1008 |
default { |
| 1009 |
perror "unrecognized DUMPPROG option $opts(DUMPPROG) in $file.d" |
| 1010 |
unresolved $testname |
| 1011 |
return |
| 1012 |
} |
| 1013 |
} |
| 1014 |
} else { |
| 1015 |
# Guess which program to run, by seeing which option was specified. |
| 1016 |
foreach p {addr2line nm objdump readelf size} { |
| 1017 |
if {$opts($p) != ""} { |
| 1018 |
if {$dumpprogram != ""} { |
| 1019 |
perror "ambiguous dump program in $file.d" |
| 1020 |
unresolved $testname |
| 1021 |
return |
| 1022 |
} else { |
| 1023 |
set dumpprogram $p |
| 1024 |
} |
| 1025 |
} |
| 1026 |
} |
| 1027 |
} |
| 1028 |
if { $dumpprogram == "" && $opts(map) == "" && !$err_warn } { |
| 1029 |
perror "dump program unspecified in $file.d" |
| 1030 |
unresolved $testname |
| 1031 |
return |
| 1032 |
} |
| 1033 |
} |
| 1034 |
|
| 1035 |
if { $opts(source) == "" } { |
| 1036 |
set sourcefiles [list ${file}.s] |
| 1037 |
set asflags [list ""] |
| 1038 |
set objfile_names [list tmpdir/[file tail ${file}].o] |
| 1039 |
} else { |
| 1040 |
set sourcefiles {} |
| 1041 |
foreach sf $opts(source) { |
| 1042 |
if { [string match "./*" $sf] } { |
| 1043 |
lappend sourcefiles "$sf" |
| 1044 |
} else { |
| 1045 |
lappend sourcefiles "$srcdir/$subdir/$sf" |
| 1046 |
} |
| 1047 |
} |
| 1048 |
} |
| 1049 |
|
| 1050 |
if { $opts(dump) == "" } { |
| 1051 |
set dfile ${file}.d |
| 1052 |
} else { |
| 1053 |
set dfile $srcdir/$subdir/$opts(dump) |
| 1054 |
} |
| 1055 |
|
| 1056 |
# Time to setup xfailures. |
| 1057 |
foreach targ $opts(xfail) { |
| 1058 |
if [match_target $targ] { |
| 1059 |
setup_xfail "*-*-*" |
| 1060 |
break |
| 1061 |
} |
| 1062 |
} |
| 1063 |
|
| 1064 |
foreach as_flags $as_final_flags { |
| 1065 |
# Assemble each file. |
| 1066 |
set objfiles {} |
| 1067 |
for { set i 0 } { $i < [llength $sourcefiles] } { incr i } { |
| 1068 |
set sourcefile [lindex $sourcefiles $i] |
| 1069 |
set sourceasflags [lindex $asflags $i] |
| 1070 |
set run_objcopy_objects 0 |
| 1071 |
|
| 1072 |
if { [string match "*RUN_OBJCOPY*" $sourceasflags] } { |
| 1073 |
set run_objcopy_objects 1 |
| 1074 |
} |
| 1075 |
regsub "RUN_OBJCOPY" $sourceasflags "" sourceasflags |
| 1076 |
|
| 1077 |
set objfile [lindex $objfile_names $i] |
| 1078 |
catch "exec rm -f $objfile" exec_output |
| 1079 |
lappend objfiles $objfile |
| 1080 |
|
| 1081 |
if { $as_flags == "binary" } { |
| 1082 |
while {[file type $sourcefile] eq "link"} { |
| 1083 |
set newfile [file readlink $sourcefile] |
| 1084 |
if {[string index $newfile 0] ne "/"} { |
| 1085 |
set newfile [file dirname $sourcefile]/$newfile |
| 1086 |
} |
| 1087 |
set sourcefile $newfile |
| 1088 |
} |
| 1089 |
set newfile [remote_download host $sourcefile $objfile] |
| 1090 |
set cmdret 0 |
| 1091 |
if { $newfile == "" } { |
| 1092 |
set cmdret 1 |
| 1093 |
} |
| 1094 |
} else { |
| 1095 |
if { [istarget "hppa*-*-*"] \ |
| 1096 |
&& ![istarget "*-*-linux*"] \ |
| 1097 |
&& ![istarget "*-*-netbsd*" ] } { |
| 1098 |
set cmd "sed -e 's/^\[ \]*\.comm \\(\[^,\]*\\),\\(.*\\)/\\1 .comm \\2/' < $sourcefile > tmpdir/asm.s" |
| 1099 |
send_log "$cmd\n" |
| 1100 |
set cmdret [remote_exec host [concat sh -c [list "$cmd"]]] |
| 1101 |
set cmdret [lindex $cmdret 0] |
| 1102 |
if { $cmdret != 0 } { |
| 1103 |
perror "sed failure" |
| 1104 |
unresolved $testname |
| 1105 |
continue |
| 1106 |
} |
| 1107 |
set sourcefile tmpdir/asm.s |
| 1108 |
} |
| 1109 |
set cmd "$AS $ASFLAGS $as_flags $sourceasflags -o $objfile $sourcefile" |
| 1110 |
|
| 1111 |
send_log "$cmd\n" |
| 1112 |
set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] "" "/dev/null" "dump.tmp"] |
| 1113 |
remote_upload host "dump.tmp" |
| 1114 |
set comp_output [prune_warnings [file_contents "dump.tmp"]] |
| 1115 |
remote_file host delete "dump.tmp" |
| 1116 |
remote_file build delete "dump.tmp" |
| 1117 |
set cmdret [lindex $cmdret 0] |
| 1118 |
} |
| 1119 |
if { $cmdret == 0 && $run_objcopy_objects } { |
| 1120 |
set cmd "$OBJCOPY $opts(objcopy_objects) $objfile" |
| 1121 |
|
| 1122 |
send_log "$cmd\n" |
| 1123 |
set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] \ |
| 1124 |
"" "/dev/null" "dump.tmp"] |
| 1125 |
remote_upload host "dump.tmp" |
| 1126 |
append comp_output [prune_warnings [file_contents "dump.tmp"]] |
| 1127 |
remote_file host delete "dump.tmp" |
| 1128 |
remote_file build delete "dump.tmp" |
| 1129 |
set cmdret [lindex $cmdret 0] |
| 1130 |
} |
| 1131 |
} |
| 1132 |
|
| 1133 |
# Perhaps link the file(s). |
| 1134 |
if { $cmdret == 0 && $run_ld } { |
| 1135 |
set objfile "tmpdir/dump" |
| 1136 |
catch "exec rm -f $objfile" exec_output |
| 1137 |
|
| 1138 |
set ld_extra_opt "" |
| 1139 |
global ld |
| 1140 |
set ld "$LD" |
| 1141 |
if [check_relro_support] { |
| 1142 |
set ld_extra_opt "-z norelro" |
| 1143 |
} |
| 1144 |
|
| 1145 |
# Add -L$srcdir/$subdir so that the linker command can use |
| 1146 |
# linker scripts in the source directory. |
| 1147 |
set cmd "$LD $ld_extra_opt $LDFLAGS -L$srcdir/$subdir \ |
| 1148 |
$opts(ld) -o $objfile $objfiles $opts(ld_after_inputfiles)" |
| 1149 |
|
| 1150 |
# If needed then check for, or add a -Map option. |
| 1151 |
set mapfile "" |
| 1152 |
if { $opts(map) != "" } then { |
| 1153 |
if { [regexp -- "-Map=(\[^ \]+)" $cmd all mapfile] } then { |
| 1154 |
# Found existing mapfile option |
| 1155 |
verbose -log "Existing mapfile '$mapfile' found" |
| 1156 |
} else { |
| 1157 |
# No mapfile option. |
| 1158 |
set mapfile "tmpdir/dump.map" |
| 1159 |
verbose -log "Adding mapfile '$mapfile'" |
| 1160 |
set cmd "$cmd -Map=$mapfile" |
| 1161 |
} |
| 1162 |
} |
| 1163 |
|
| 1164 |
send_log "$cmd\n" |
| 1165 |
set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] "" "/dev/null" "dump.tmp"] |
| 1166 |
remote_upload host "dump.tmp" |
| 1167 |
append comp_output [file_contents "dump.tmp"] |
| 1168 |
remote_file host delete "dump.tmp" |
| 1169 |
remote_file build delete "dump.tmp" |
| 1170 |
set cmdret [lindex $cmdret 0] |
| 1171 |
|
| 1172 |
if { $cmdret == 0 && $run_objcopy } { |
| 1173 |
set infile $objfile |
| 1174 |
set objfile "tmpdir/dump1" |
| 1175 |
remote_file host delete $objfile |
| 1176 |
|
| 1177 |
# Note that we don't use OBJCOPYFLAGS here; any flags must be |
| 1178 |
# explicitly specified. |
| 1179 |
set cmd "$OBJCOPY $opts(objcopy_linked_file) $infile $objfile" |
| 1180 |
|
| 1181 |
send_log "$cmd\n" |
| 1182 |
set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] "" "/dev/null" "dump.tmp"] |
| 1183 |
remote_upload host "dump.tmp" |
| 1184 |
append comp_output [file_contents "dump.tmp"] |
| 1185 |
remote_file host delete "dump.tmp" |
| 1186 |
remote_file build delete "dump.tmp" |
| 1187 |
set cmdret [lindex $cmdret 0] |
| 1188 |
} |
| 1189 |
} else { |
| 1190 |
set objfile [lindex $objfiles 0] |
| 1191 |
} |
| 1192 |
|
| 1193 |
if { $cmdret == 0 && $opts(PROG) != "" } { |
| 1194 |
set destopt ${copyfile}.o |
| 1195 |
switch -- $opts(PROG) { |
| 1196 |
ar { set program ar } |
| 1197 |
elfedit { |
| 1198 |
set program elfedit |
| 1199 |
set destopt "" |
| 1200 |
} |
| 1201 |
nm { set program nm } |
| 1202 |
objcopy { set program objcopy } |
| 1203 |
ranlib { set program ranlib } |
| 1204 |
strings { set program strings } |
| 1205 |
strip { |
| 1206 |
set program strip |
| 1207 |
set destopt "-o $destopt" |
| 1208 |
} |
| 1209 |
default { |
| 1210 |
perror "unrecognized PROG option $opts(PROG) in $file.d" |
| 1211 |
unresolved $testname |
| 1212 |
continue |
| 1213 |
} |
| 1214 |
} |
| 1215 |
|
| 1216 |
set progopts1 $opts($program) |
| 1217 |
eval set progopts \$[string toupper $program]FLAGS |
| 1218 |
eval set binary \$[string toupper $program] |
| 1219 |
|
| 1220 |
if { ![is_remote host] && [which $binary] == 0 } { |
| 1221 |
untested $testname |
| 1222 |
continue |
| 1223 |
} |
| 1224 |
|
| 1225 |
verbose "running $binary $progopts $progopts1" 3 |
| 1226 |
set cmd "$binary $progopts $progopts1 $objfile $destopt" |
| 1227 |
|
| 1228 |
# Ensure consistent sorting of symbols |
| 1229 |
if {[info exists env(LC_ALL)]} { |
| 1230 |
set old_lc_all $env(LC_ALL) |
| 1231 |
} |
| 1232 |
set env(LC_ALL) "C" |
| 1233 |
send_log "$cmd\n" |
| 1234 |
set cmdret [remote_exec host [concat sh -c [list "$cmd 2>dump.tmp"]] "" "/dev/null"] |
| 1235 |
set cmdret [lindex $cmdret 0] |
| 1236 |
remote_upload host "dump.tmp" |
| 1237 |
append comp_output [prune_warnings [file_contents "dump.tmp"]] |
| 1238 |
remote_file host delete "dump.tmp" |
| 1239 |
remote_file build delete "dump.tmp" |
| 1240 |
if {[info exists old_lc_all]} { |
| 1241 |
set env(LC_ALL) $old_lc_all |
| 1242 |
} else { |
| 1243 |
unset env(LC_ALL) |
| 1244 |
} |
| 1245 |
if { $destopt != "" } { |
| 1246 |
set objfile ${copyfile}.o |
| 1247 |
} |
| 1248 |
} |
| 1249 |
|
| 1250 |
set want_out(source) "" |
| 1251 |
set want_out(terminal) 0 |
| 1252 |
if { $err_warn } { |
| 1253 |
if { $opts(error) != "" || $opts(error_output) != "" } { |
| 1254 |
set want_out(terminal) 1 |
| 1255 |
} |
| 1256 |
|
| 1257 |
if { $opts(error) != "" || $opts(warning) != "" } { |
| 1258 |
set want_out(source) "regex" |
| 1259 |
if { $opts(error) != "" } { |
| 1260 |
set want_out(regex) $opts(error) |
| 1261 |
} else { |
| 1262 |
set want_out(regex) $opts(warning) |
| 1263 |
} |
| 1264 |
} else { |
| 1265 |
set want_out(source) "file" |
| 1266 |
if { $opts(error_output) != "" } { |
| 1267 |
set want_out(file) $opts(error_output) |
| 1268 |
} else { |
| 1269 |
set want_out(file) $opts(warning_output) |
| 1270 |
} |
| 1271 |
} |
| 1272 |
} |
| 1273 |
|
| 1274 |
regsub "\n$" $comp_output "" comp_output |
| 1275 |
if { $cmdret != 0 || $comp_output != "" || $want_out(source) != "" } { |
| 1276 |
set exitstat "succeeded" |
| 1277 |
if { $cmdret != 0 } { set exitstat "failed" } |
| 1278 |
|
| 1279 |
if { $want_out(source) == "regex" } { |
| 1280 |
verbose -log "$exitstat with: <$comp_output>, expected: <$want_out(regex)>" |
| 1281 |
} elseif { $want_out(source) == "file" } { |
| 1282 |
verbose -log "$exitstat with: <$comp_output>, expected in file $want_out(file)" |
| 1283 |
set_file_contents "tmpdir/ld.messages" "$comp_output" |
| 1284 |
} else { |
| 1285 |
verbose -log "$exitstat with: <$comp_output>, no expected output" |
| 1286 |
} |
| 1287 |
|
| 1288 |
if { (($want_out(source) == "") == ($comp_output == "")) \ |
| 1289 |
&& (($cmdret == 0) == ($want_out(terminal) == 0)) \ |
| 1290 |
&& ((($want_out(source) == "regex") \ |
| 1291 |
&& [regexp -- $want_out(regex) $comp_output]) \ |
| 1292 |
|| (($want_out(source) == "file") \ |
| 1293 |
&& (![regexp_diff "tmpdir/ld.messages" "$srcdir/$subdir/$want_out(file)"]))) } { |
| 1294 |
# We have the expected output. |
| 1295 |
if { $want_out(terminal) || $dumpprogram == "" } { |
| 1296 |
pass $testname |
| 1297 |
continue |
| 1298 |
} |
| 1299 |
} else { |
| 1300 |
fail $testname |
| 1301 |
continue |
| 1302 |
} |
| 1303 |
} |
| 1304 |
|
| 1305 |
# We must not have expected failure if we get here. |
| 1306 |
if { $opts(error) != "" } { |
| 1307 |
fail $testname |
| 1308 |
continue |
| 1309 |
} |
| 1310 |
|
| 1311 |
if { $opts(map) != "" } then { |
| 1312 |
# Check the map file matches. |
| 1313 |
set map_pattern_file $srcdir/$subdir/$opts(map) |
| 1314 |
verbose -log "Compare '$mapfile' against '$map_pattern_file'" |
| 1315 |
if { [regexp_diff $mapfile $map_pattern_file] } then { |
| 1316 |
fail "$testname (map file check)" |
| 1317 |
} else { |
| 1318 |
pass "$testname (map file check)" |
| 1319 |
} |
| 1320 |
|
| 1321 |
if { $dumpprogram == "" } then { |
| 1322 |
continue |
| 1323 |
} |
| 1324 |
} |
| 1325 |
|
| 1326 |
set progopts1 $opts($dumpprogram) |
| 1327 |
eval set progopts \$[string toupper $dumpprogram]FLAGS |
| 1328 |
eval set binary \$[string toupper $dumpprogram] |
| 1329 |
|
| 1330 |
if { ![is_remote host] && [which $binary] == 0 } { |
| 1331 |
untested $testname |
| 1332 |
continue |
| 1333 |
} |
| 1334 |
|
| 1335 |
# For objdump of gas output, automatically translate standard section names |
| 1336 |
set sect_names "" |
| 1337 |
if { !$run_ld && $dumpprogram == "objdump" \ |
| 1338 |
&& $opts(section_subst) != "no" \ |
| 1339 |
&& ![string match "*-b binary*" $progopts1] } { |
| 1340 |
set sect_names [get_standard_section_names] |
| 1341 |
if { $sect_names != ""} { |
| 1342 |
regsub -- "\\.text" $progopts1 "[lindex $sect_names 0]" progopts1 |
| 1343 |
regsub -- "\\.data" $progopts1 "[lindex $sect_names 1]" progopts1 |
| 1344 |
regsub -- "\\.bss" $progopts1 "[lindex $sect_names 2]" progopts1 |
| 1345 |
} |
| 1346 |
} |
| 1347 |
|
| 1348 |
if { $progopts1 == "" } { set $progopts1 "-r" } |
| 1349 |
verbose "running $binary $progopts $progopts1" 3 |
| 1350 |
|
| 1351 |
set cmd "$binary $progopts $progopts1 $objfile > $dumpfile" |
| 1352 |
|
| 1353 |
# Ensure consistent sorting of symbols |
| 1354 |
if {[info exists env(LC_ALL)]} { |
| 1355 |
set old_lc_all $env(LC_ALL) |
| 1356 |
} |
| 1357 |
set env(LC_ALL) "C" |
| 1358 |
send_log "$cmd\n" |
| 1359 |
set cmdret [remote_exec host [concat sh -c [list "$cmd 2>dump.tmp"]] "" "/dev/null"] |
| 1360 |
set cmdret [lindex $cmdret 0] |
| 1361 |
remote_upload host "dump.tmp" |
| 1362 |
set comp_output [prune_warnings [file_contents "dump.tmp"]] |
| 1363 |
remote_file host delete "dump.tmp" |
| 1364 |
remote_file build delete "dump.tmp" |
| 1365 |
if {[info exists old_lc_all]} { |
| 1366 |
set env(LC_ALL) $old_lc_all |
| 1367 |
} else { |
| 1368 |
unset env(LC_ALL) |
| 1369 |
} |
| 1370 |
if { $cmdret != 0 || $comp_output != "" } { |
| 1371 |
send_log "exited abnormally with $cmdret, output:$comp_output\n" |
| 1372 |
fail $testname |
| 1373 |
continue |
| 1374 |
} |
| 1375 |
|
| 1376 |
if { $verbose > 2 } then { verbose "output is [file_contents $dumpfile]" 3 } |
| 1377 |
|
| 1378 |
# Create the substition list for objdump output. |
| 1379 |
set regexp_subst "" |
| 1380 |
if { $sect_names != "" } { |
| 1381 |
set regexp_subst [list "\\\\?\\.text" [lindex $sect_names 0] \ |
| 1382 |
"\\\\?\\.data" [lindex $sect_names 1] \ |
| 1383 |
"\\\\?\\.bss" [lindex $sect_names 2] ] |
| 1384 |
} |
| 1385 |
|
| 1386 |
if { [regexp_diff $dumpfile "${dfile}" $regexp_subst] } then { |
| 1387 |
fail $testname |
| 1388 |
if { $verbose == 2 } then { verbose "output is [file_contents $dumpfile]" 2 } |
| 1389 |
continue |
| 1390 |
} |
| 1391 |
|
| 1392 |
pass $testname |
| 1393 |
} |
| 1394 |
} |
| 1395 |
|
| 1396 |
proc slurp_options { file } { |
| 1397 |
# If options_regsub(foo) is set to {a b}, then the contents of a |
| 1398 |
# "#foo:" line will have regsub -all applied to replace a with b. |
| 1399 |
global options_regsub |
| 1400 |
|
| 1401 |
if [catch { set f [open $file r] } x] { |
| 1402 |
#perror "couldn't open `$file': $x" |
| 1403 |
perror "$x" |
| 1404 |
return -1 |
| 1405 |
} |
| 1406 |
set opt_array {} |
| 1407 |
# whitespace expression |
| 1408 |
set ws {[ ]*} |
| 1409 |
set nws {[^ ]*} |
| 1410 |
# whitespace is ignored anywhere except within the options list; |
| 1411 |
# option names are alphanumeric plus underscore. |
| 1412 |
set pat "^#${ws}(\[a-zA-Z0-9_\]*)$ws:${ws}(.*)$ws\$" |
| 1413 |
while { [gets $f line] != -1 } { |
| 1414 |
set line [string trim $line] |
| 1415 |
# Whitespace here is space-tab. |
| 1416 |
if [regexp $pat $line xxx opt_name opt_val] { |
| 1417 |
# match! |
| 1418 |
if [info exists options_regsub($opt_name)] { |
| 1419 |
set subst $options_regsub($opt_name) |
| 1420 |
regsub -all -- [lindex $subst 0] $opt_val [lindex $subst 1] \ |
| 1421 |
opt_val |
| 1422 |
} |
| 1423 |
lappend opt_array [list $opt_name $opt_val] |
| 1424 |
} elseif {![regexp "^#" $line ]} { |
| 1425 |
break |
| 1426 |
} |
| 1427 |
} |
| 1428 |
close $f |
| 1429 |
return $opt_array |
| 1430 |
} |
| 1431 |
|
| 1432 |
proc file_contents { filename } { |
| 1433 |
set file [open $filename r] |
| 1434 |
set contents [read $file] |
| 1435 |
close $file |
| 1436 |
return $contents |
| 1437 |
} |
| 1438 |
|
| 1439 |
proc set_file_contents { filename contents } { |
| 1440 |
set file [open $filename w] |
| 1441 |
puts $file "$contents" |
| 1442 |
close $file |
| 1443 |
} |
| 1444 |
|
| 1445 |
# Look for big-endian or little-endian switches in the multlib |
| 1446 |
# options and translate these into a -EB or -EL switch. Note |
| 1447 |
# we cannot rely upon proc process_multilib_options to do this |
| 1448 |
# for us because for some targets the compiler does not support |
| 1449 |
# -EB/-EL but it does support -mbig-endian/-mlittle-endian, and |
| 1450 |
# the site.exp file will include the switch "-mbig-endian" |
| 1451 |
# (rather than "big-endian") which is not detected by proc |
| 1452 |
# process_multilib_options. |
| 1453 |
# |
| 1454 |
proc big_or_little_endian {} { |
| 1455 |
|
| 1456 |
if [board_info [target_info name] exists multilib_flags] { |
| 1457 |
set tmp_flags " [board_info [target_info name] multilib_flags]" |
| 1458 |
|
| 1459 |
foreach x $tmp_flags { |
| 1460 |
switch -glob $x { |
| 1461 |
*big*endian - |
| 1462 |
eb - |
| 1463 |
EB - |
| 1464 |
-eb - |
| 1465 |
-EB - |
| 1466 |
-mb - |
| 1467 |
-meb { |
| 1468 |
set flags " -EB" |
| 1469 |
return $flags |
| 1470 |
} |
| 1471 |
*little*endian - |
| 1472 |
el - |
| 1473 |
EL - |
| 1474 |
-el - |
| 1475 |
-EL - |
| 1476 |
-ml - |
| 1477 |
-mel { |
| 1478 |
set flags " -EL" |
| 1479 |
return $flags |
| 1480 |
} |
| 1481 |
} |
| 1482 |
} |
| 1483 |
} |
| 1484 |
|
| 1485 |
set flags "" |
| 1486 |
return $flags |
| 1487 |
} |
| 1488 |
|
| 1489 |
# Internal procedure: return the names of the standard sections |
| 1490 |
# |
| 1491 |
proc get_standard_section_names {} { |
| 1492 |
if [istarget "rx-*-elf"] { |
| 1493 |
return { "P" "D_1" "B_1" } |
| 1494 |
} |
| 1495 |
if { [istarget "alpha*-*-*vms*"] || [is_som_format] } { |
| 1496 |
return { {\$CODE\$} {\$DATA\$} {\$BSS\$} } |
| 1497 |
} |
| 1498 |
return |
| 1499 |
} |