Debian Codegraph @

CHANGES

raw
1 1.16 (2026-03-16)
2 - Bugfix for -w. Rreported by ytti, fixed by Gerdriaan Mulder.
3
4 1.15 (2024-05-15)
5 - Apologies, debug code slipped into the last release
6
7 1.14 (2024-05-14)
8 - Small performance gain: set TCP_NODELAY on the socket
9
10 1.13 (2024-05-01)
11 - Fixed a bug for Mac users by removing sx_maxsockbuf()
12 - Fixed a comma printing bug in IOS XR as-path-set output
13
14 1.12 (2024-02-12)
15 - Fix a bug in the mikrotik printer
16
17 1.11 (2023-06-20)
18 - disallow AS 23456 as origin (can be bypassed via -p)
19
20 1.10 (2023-06-03)
21 - Add support for Nokia SR Linux IP prefix lists / ACL filters
22 - Accept -3 as a no-op for bgpq3 compatibility
23
24 1.9 (2023-03-05)
25 - Bugfix for -S problem (bgpq4#83) by James Bensley
26
27 1.8 (2023-01-20)
28 - Downgrade 'key not found' to DEBUG level to reduce noise
29 - Re-introduce -p for private ASN support option
30
31 1.7 (2022-11-03)
32 - Support SOURCE:: syntax (contributed by James Bensley)
33
34 1.6 (2022-09-07)
35 - Fix a bug in address prefix range parsing
36
37 1.5 (2022-07-25)
38 - Add support for the new Junos as-path-origins feature
39
40 1.4 (2021-08-20)
41 - Fix BIRD aspath output
42
43 1.3 (2021-08-20)
44 - Change versioning from X.Y.Z to Y.Z
45 - The repository file hierachy has been reorganized (compat/ include/)
46 - Man page has been extended
47 - Large portions of code have been reformatted to adhere to OpenBSD's source
48 file style guide to improve readability.
49 - Refactor: replace two-dimensional array for ASN storage with Red-Black tree
50 - Reduced memory usage
51
52 0.0.9 (2021-08-18)
53 - Fix various memory errors
54
55 0.0.8 (2021-08-17)
56 - Reorganize automake files and includes
57 - Normalize code to adhere to KNF
58 - Fix all compiler warnings
59
60 0.0.6 (2020-03-12):
61 - Bugfixes - Thanks Chris Caputo!
62
63 0.0.5 (2020-01-01):
64 - Bugfixes
65
66 0.0.4 (2019-12-31):
67 - Remove the '-3' command line option, assume all devices are
68 32-bit ASN safe
69
70 0.0.3 (2019-12-30):
71 - Remove the '-2' command line option
72 - Significant code reformating
73 - Improve performance by using IRRd 4's A query when available
74
75 0.0.2 (2019-12-14):
76 - Add Mikrotik support
77 - Remove ASDDOT support
78
79 0.0.1 (2019-12-14):
80 - Fork bgpq3 into bgpq4
81
82 0.1.36-pre (2019-11-08):
83 - minor documentation cleanup: bgpq3 supports much more vendors
84 than just Cisco and Juniper. Copyright years updated.
85 - Nokia SR OS "classic" actually supports aggregation and
86 and more-specific filtering in prefix-lists. Thanks to mfisher128
87 for reporting.
88 - change log level for prefixes with wrong address family from error
89 to debugging: it's perfectly correct to have prefixes of different
90 families in route-sets. Thanks to Jay Ford for suggestion.
91
92 0.1.35 (2018-11-30):
93 - initial support for Juniper route-filter-lists (JunOS 16.2+).
94 - too large (>124bytes) sources list was not handled correctly.
95 Reported by Pier Carlo Chiodi.
96 - initial support for Huawei format (prefix-lists and as-path filters)
97 New flag -U. Requested by Alexander Wagberg.
98 - fix ipv6 prefix-ranges. Reported by Jay Ford.
99 - OpenBGPd change: -E now generates prefix-set instead of prefix-list.
100 Based on submission by Denis Fondras
101 - new option -w, allowing to 'validate' AS numbers included in as-path
102 access-lists: only those AS having registered route-objects are allowed.
103 By default checks route[4] presence, to check route6 objects shall be
104 used together with -6.
105 - cleanup OpenBGPd prefix-sets. Submitted by Claudio Jeker.
106 - new flag -t: generate as-sets for OpenBGPD (OpenBSD 6.4+), BIRD and
107 JSON formats. Based on submission by Claudio Jeker.
108 - new flag -n: support for Nokia SR OS MD-CLI. Based on examples
109 provided by Greg Hankins.
110 - irrd queries for asn32 changed from asdot to asplain notation.
111 Thanks to Troy2914 for heads up.
112
113 0.1.35-rc2 (2017-06-14)
114 - OpenBSD need <sys/select.h>. Reported by Denis Fondras.
115 - OpenBGPD output shall not emit 'deny any from any' in case of empty
116 prefix-list. New flag -a <asn> introduced to allow peer-as indication.
117 When this flag is not specified, empty prefix-list is generated (will
118 not be accepted by OpenBGPD).
119 Reported by Denis Fondras
120
121 0.1.35-rc (2017-30-05)
122 - Nokia SR OS (formerly Alcatel-Lucent) support. Based on submission by
123 Michail Litvak.
124 - sync man-page with readme.md
125 - socket() EAFNOSUPPORT error handling
126
127 0.1.33 (2016-10-14)
128 - OpenBGPD support (-B). Submitted by Peter Hessler.
129
130 0.1.32 (2016-08-28)
131 - rollback 0.1.32-rc2 (2015-07-01) change: by default all IRRD sources
132 are allowed by default. Documentation updated to mark radb,ripe,apnic
133 as 'recommended', not as 'preset default'.
134
135 untagged yet (2016-05-10)
136 - fix: was not able to build on Solaris. Thanks to Mansoor Ali Khan.
137 - feature: IOS XR mode now supports as-paths (ios-regexs). Thanks
138 to Tassos Chatzithomaoglou for examples and proofreading.
139 (additions from 2015-09-23)
140 - bugfix: stoplist shall be able to catch AS numbers as promised.
141 - bugfix: bgpq3 shall not hang at unknown escapes in -M..
142 - gotcha: "ANY" object in recursive mode ignored: shut complaints on
143 "ERROR:unexpected object 'ANY' in expanded_macro_limit (in response
144 to !iAS-SET-SCOPESKY)" (object contains mbrs-by-ref: ANY).
145 (additions from 2015-08-30)
146 - bugfix: OpenBSD sys/queue.h does not have STAILQ_ interface.
147 Thanks to Pedro Caetano for reporting and testing.
148 - feature: alternate whois port can be configured with -h host[:port]
149 - feature: new format char %N (object name) in formatted output.
150 Thanks to Denis Fondras.
151 - feature: new format chars %m (prefix mask) and %i (inverse mask) in
152 formatted output.
153
154 0.1.32-rc5 (2015-07-12)
155 - feature: -L <depth>: limit recursion depth when expanding as-sets
156 (default: not limited). Based on idea by Eugene Demidov.
157 - feature: stoplist. Now you can add EXCEPT Object... at the end of
158 bgpq3 command line and corresponding as-sets and asns will not be
159 expanded (does not works for prefixes and prefix-sets yet).
160 - internals: major pipelining rewrite and some code cleanup.
161
162 0.1.32-rc4 (2015-07-06)
163 - change: BIRD can't handle empty lists (NAME = []), so they are not
164 generated at all.
165
166 0.1.32-rc3 (2015-07-01)
167 - feature: option -s can be used to generate sequence numbers in IOS
168 prefix-lists
169 - feature: option -F <fmt> can be used to generate output in user-defined
170 format. Only prefix-lists supported for now.
171
172 0.1.32-rc2 (2015-07-01)
173 - bugfix: when no sources provided in command line and via IRRD_SOURCES env,
174 no source limitation were sent to IRRd. Thanks to Mikhail A. Grishin.
175
176 0.1.32-rc (2015-06-28)
177 - bugfix: F source(s) unavailable message from IRRD was ignored.
178 Please note: this error is caught only when all the specified sources
179 are invalid. For example, 'bgpq3 -s nonexistant' will fail, however,
180 'bgpq3 -s nonexistant,ripe' will not fail and will use only ripe source.
181 Thanks to Mikhail A. Grishin for reporting.
182 - RIPE-style queries (-T route6 -i origin asNNN) replaced with IRRd-style
183 !6asNNN queries.
184
185 0.1.31 (2015-06-23)
186 - pipelining mode now counts buffered requests and issues dequeue
187 when new request can overflow allocated buffer. So, bgpq3 shall no
188 more require TCP tuning (it is still recomended, though).
189 - tcp tuning parameters decreased in README (sx_maxsockbuf will not
190 allow buffer over 2Mb anyway).
191
192 0.1.30 (2015-06-16)
193 - bugfix: private asns with number > 2^31 were printed as negative integers.
194 Thanks to Henrik Thostrup Jensen.
195 - do not use ASNs reserved for documentation purposes and private use:
196 64496-64511 For documentation and sample code; reserved by [RFC5398]
197 64512-65534 For private use; reserved by [RFC6996]
198 65535 Reserved by [RFC7300]
199 65536-65551 For documentation and sample code; reserved by [RFC5398]
200 4200000000-4294967294 For private use; reserved by [RFC6996]
201 4294967295 Reserved by [RFC7300]
202 Please, use new -p flag to include these asn's.
203 Suggested by Henrik Thostrup Jensen and Job Snijders.
204 - allow as-path generation with BIRD output. Suggested by Jiri Mikulas.
205 - merge README.md changes by Job Snijders.
206 - bugfix: incorrect asdot representation (as101. without symbols after dot)
207 is not allowed anymore.
208
209 0.1.29 (2015-05-04)
210 - do not include routes registered for AS23456 (transition-as) by default.
211 Use new option -2 to restore old behaviour.
212
213 0.1.28 (2015-03-10)
214 - minor changes: .spec update, non-silent failure on wrong af,
215 more room for masklen...
216
217 0.1.27 (2015-03-10)
218 - bugfix: some ipv6 prefixes were not parsed correctly since 0.1.26.
219 Thanks to Job Snijders.
220
221 0.1.26 (2015-02-19)
222 - RPSL <address-prefix-range> support, can be found in rs-esnetcustomers.
223 Thanks to Kris O'Connell for reporting.
224
225 0.1.25 (2014-10-29)
226 - JSON support extended to handle "as-paths" too. Well, actually, as
227 there are no defined format for as-path in json, bgpq3 just creates
228 simple object like following:
229
230 snar@fri:~/compile/bgpq3>./bgpq3 -j3f 20597 as-eltel
231 {"NN": [
232 112,5495,6857,8377,20597,34102,35357,43951,
233 52007,56764,197759,197888,198610,201499
234 ]}
235
236 Based on suggestion by Henrik Thostrup Jensen.
237 - -W len option documented.
238
239 0.1.24 (2014-07-31)
240 - empty prefix-lists (Cisco), extended access-lists (Cisco), as-path
241 filters (Cisco and Juniper) and route-filters (Juniper) handling:
242 explicit 'deny any' entry now generated instead of implicit 'permit-any'.
243 Based on suggestion by Tore Anderson.
244
245 0.1.23 (2014-07-30)
246 - bugfix: use of -M option caused major slowdown as it turned off
247 request pipelining... Thanks to Tore Anderson.
248
249 0.1.22 (2014-07-27)
250 - bugfix: allow network object with stray spaces after prefix length.
251 Found by Tom Eichhorn in 2620:74:14::/48 (VeriSign Route6, RADB).
252 - bugfix: networks with leading zeros (02.51.252.0/22, as4787) are not
253 parsed correctly in inet_ntop.. Found by Tom Eichhorn.
254
255 0.1.21 (2014-06-05)
256 - new flag -b: generate prefix-filters for BIRD (http://bird.network.cz),
257 contributed by Job Snijders.
258
259 0.1.20-todo2 (2014-05-01)
260 - new flag -r <len>, allowing bgpq to generate limited set of more-specific
261 routes - only routes with prefix-length >= <len> are accepted.
262 Thanks to Pavel Gulchouck for suggesion.
263
264 0.1.20-todo (2013-10-07)
265 - socket close code fixed. Thanks to Martin J. Levy.
266 - new flag -4, "force ipv4". Actually does a little more than allowing
267 for pedantic checks. Thanks to Martin J. Levy.
268
269 0.1.19 (2013-05-09)
270 - CLANG compilation issues fixed.
271 - bgpq3.spec added. Thanks to Arnoud Vermeer.
272
273 0.1.18 (2013-01-08)
274 - JSON output format. Thanks to Job Snijders (Atrato Networks).
275
276 0.1.17 (2012-10-25)
277 - route-sets handling in command-line added. Thanks to Alexandr Turovsky
278 for pointing out.
279 - bug in aggregation documentation fixed. Thanks to Nikolay Shopik.
280
281 0.1.16 (2012-01-19)
282 - new option -m <len>: maximum length of accepted prefixes.
283 Suggested by Eugene Demidov, used to discard 'too long prefixes'
284 (like /30-/32) even if they are registered in IRR. By default
285 limit is not set and all prefixes accepted.
286 - documentation redesigned into text/markdown and text/html (manpage
287 supported still).
288
289 0.1.15 (2011-07-15)
290 - prefix-set's for Cisco IOS XR now supported too.
291
292 0.1.14 (2011-06-18)
293 - Fixed bug in sx_maxsockbuf in rare cases of OS maxsockbuf >2M.
294 Thanks to Andreas Lundin.
295
296 0.1.13 (2011-06-14)
297 - never publically released.
298
299 0.1.12 (2010-10-08)
300 - Fixed bug preventing AS262144 (that's AS4.0 in asdot) to expand.
301 Thanks to Sergey Matveychuk
302
303 0.1.11 (2010-04-19)
304 - Fixed another bug in aggregation (-A) mode, thanks to Dmitry Tejblum.
305
306 0.1.10 (2009-06-13)
307 - Fixed bug in aggregation (-A) mode, thanks to Sergey Gonchar.
308
309 0.1.9 (2009-03-27)
310 - RIPE changed ASN32 notation to asplain. And RADB does not support
311 asplain indexing (yet?).... Fixed. Thanks to Pavel Gluchouk.
312
313 0.1.8 (2008-12-25)
314 - new flag -D for Cisco asdot notation. Cisco behaviour is a bit
315 strange for me, but, well, that's their decision:
316 When the asdot format is enabled as the default, any regular expressions
317 to match 4-byte autonomous system numbers must be written using the asdot
318 format, or else the regular expression match will fail.
319 (c) http://www.cisco.com/en/US/docs/ios/12_0s/release/ntes/120SNEWF.html
320 #wp3521658 (note the URL wrap).
321
322 0.1.7 (2008-12-19):
323 - man page. Finally :)
324 - option -h now means not help, but now it can be used to point to
325 alternate IRRD host, like in old bgpq.
326
327 0.1.6 (2008-08-08):
328 - maxsockbuf call added, that can help with pipelining of really large
329 as-sets.
330 - new key -M <extra match condition> for juniper route-filters, f.e.:
331 bgpq3 -JEM "protocol bgp;\n community no-export" -l PolicyName/TermName
332 will generate term with additional match conditions, like:
333
334 policy-options {
335 policy-statement PolicyName {
336 term TermName {
337 replace:
338 from {
339 protocol bgp;
340 community no-export;
341 route-filter 10.0.0.0/24 exact;
342 }
343 }
344 }
345 }
346
347 0.1.5 (2008-06-02):
348 - route-set's expansion added. Fully functional for IPv4 prefixes, but
349 not for IPv6 - only those prefixes explicitely marked as 'member-of: RS..'
350 will be expanded. This is due to limitation in IRRd.
351 - extended access-lists (Cisco) and route-filters (Juniper) generation
352 is supported now with new -E key. For Cisco ipv6 access-lists is not
353 yet supported.
354
355 0.1.4 (2008-05-30):
356 - bugfix for juniper as-path group generation. Thanks to Alexander Shikoff.
357
358 0.1.3 (2008-05-20):
359 - aggregation (-A) now supported for Cisco prefix-lists.
360 - pipelining now can be enabled for RIPE-style queries too (ipv6).
361 - more-specific routes (-R len) feature ported from bgpq
362 - pipelining now set by default. -T flag now disables pipelining.
363 - strlcpy.c imported into sources. Not found on Linux :)
364
365 0.1.2 (2008-05-19):
366 - final support for asn32, now with correct syntax for Juniper.
367 - experimental 'pipelining' mode (flag -T), much faster when
368 working with big as-set's.
369 - RIPE-style query (-i origin) now requests only route6 objects.
370
371 0.1.1 (2008-05-16):
372 - initial support for asn32 added (flag -3). By default it's off,
373 and when bgpq sees 32-bit asn in resolver queue, it either replaces
374 it with AS23456 (in as-path generation mode) or queries radb for
375 prefixes with that origin.
376 Note: for now only JunOS 9.1 can handle asn32, not Cisco IOS..
377