| 1 |
// BSD 3-Clause License |
| 2 |
// |
| 3 |
// Copyright (c) 2021, Aaron Giles |
| 4 |
// All rights reserved. |
| 5 |
// |
| 6 |
// Redistribution and use in source and binary forms, with or without |
| 7 |
// modification, are permitted provided that the following conditions are met: |
| 8 |
// |
| 9 |
// 1. Redistributions of source code must retain the above copyright notice, this |
| 10 |
// list of conditions and the following disclaimer. |
| 11 |
// |
| 12 |
// 2. Redistributions in binary form must reproduce the above copyright notice, |
| 13 |
// this list of conditions and the following disclaimer in the documentation |
| 14 |
// and/or other materials provided with the distribution. |
| 15 |
// |
| 16 |
// 3. Neither the name of the copyright holder nor the names of its |
| 17 |
// contributors may be used to endorse or promote products derived from |
| 18 |
// this software without specific prior written permission. |
| 19 |
// |
| 20 |
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| 21 |
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| 22 |
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 23 |
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| 24 |
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 25 |
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| 26 |
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| 27 |
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| 28 |
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 29 |
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 30 |
|
| 31 |
#ifndef YMFM_FM_H |
| 32 |
#define YMFM_FM_H |
| 33 |
|
| 34 |
#pragma once |
| 35 |
|
| 36 |
#include <cstdint> |
| 37 |
#include "ymfm.h" |
| 38 |
|
| 39 |
#define DEBUG_LOG_WAVFILES (0) |
| 40 |
|
| 41 |
namespace ymfm |
| 42 |
{ |
| 43 |
|
| 44 |
//********************************************************* |
| 45 |
// GLOBAL ENUMERATORS |
| 46 |
//********************************************************* |
| 47 |
|
| 48 |
// three different keyon sources; actual keyon is an OR over all of these |
| 49 |
enum keyon_type : uint32_t |
| 50 |
{ |
| 51 |
KEYON_NORMAL = 0, |
| 52 |
KEYON_RHYTHM = 1, |
| 53 |
KEYON_CSM = 2 |
| 54 |
}; |
| 55 |
|
| 56 |
|
| 57 |
|
| 58 |
//********************************************************* |
| 59 |
// CORE IMPLEMENTATION |
| 60 |
//********************************************************* |
| 61 |
|
| 62 |
// ======================> opdata_cache |
| 63 |
|
| 64 |
// this class holds data that is computed once at the start of clocking |
| 65 |
// and remains static during subsequent sound generation |
| 66 |
struct opdata_cache |
| 67 |
{ |
| 68 |
// set phase_step to this value to recalculate it each sample; needed |
| 69 |
// in the case of PM LFO changes |
| 70 |
static constexpr uint32_t PHASE_STEP_DYNAMIC = 1; |
| 71 |
|
| 72 |
uint16_t const *waveform; // base of sine table |
| 73 |
uint32_t phase_step; // phase step, or PHASE_STEP_DYNAMIC if PM is active |
| 74 |
uint32_t total_level; // total level * 8 + KSL |
| 75 |
uint32_t block_freq; // raw block frequency value (used to compute phase_step) |
| 76 |
int32_t detune; // detuning value (used to compute phase_step) |
| 77 |
uint32_t multiple; // multiple value (x.1, used to compute phase_step) |
| 78 |
uint32_t eg_sustain; // sustain level, shifted up to envelope values |
| 79 |
uint8_t eg_rate[EG_STATES]; // envelope rate, including KSR |
| 80 |
uint8_t eg_shift = 0; // envelope shift amount |
| 81 |
}; |
| 82 |
|
| 83 |
|
| 84 |
// ======================> fm_registers_base |
| 85 |
|
| 86 |
// base class for family-specific register classes; this provides a few |
| 87 |
// constants, common defaults, and helpers, but mostly each derived class is |
| 88 |
// responsible for defining all commonly-called methods |
| 89 |
class fm_registers_base |
| 90 |
{ |
| 91 |
public: |
| 92 |
// this value is returned from the write() function for rhythm channels |
| 93 |
static constexpr uint32_t RHYTHM_CHANNEL = 0xff; |
| 94 |
|
| 95 |
// this is the size of a full sin waveform |
| 96 |
static constexpr uint32_t WAVEFORM_LENGTH = 0x400; |
| 97 |
|
| 98 |
// |
| 99 |
// the following constants need to be defined per family: |
| 100 |
// uint32_t OUTPUTS: The number of outputs exposed (1-4) |
| 101 |
// uint32_t CHANNELS: The number of channels on the chip |
| 102 |
// uint32_t ALL_CHANNELS: A bitmask of all channels |
| 103 |
// uint32_t OPERATORS: The number of operators on the chip |
| 104 |
// uint32_t WAVEFORMS: The number of waveforms offered |
| 105 |
// uint32_t REGISTERS: The number of 8-bit registers allocated |
| 106 |
// uint32_t DEFAULT_PRESCALE: The starting clock prescale |
| 107 |
// uint32_t EG_CLOCK_DIVIDER: The clock divider of the envelope generator |
| 108 |
// uint32_t CSM_TRIGGER_MASK: Mask of channels to trigger in CSM mode |
| 109 |
// uint32_t REG_MODE: The address of the "mode" register controlling timers |
| 110 |
// uint8_t STATUS_TIMERA: Status bit to set when timer A fires |
| 111 |
// uint8_t STATUS_TIMERB: Status bit to set when tiemr B fires |
| 112 |
// uint8_t STATUS_BUSY: Status bit to set when the chip is busy |
| 113 |
// uint8_t STATUS_IRQ: Status bit to set when an IRQ is signalled |
| 114 |
// |
| 115 |
// the following constants are uncommon: |
| 116 |
// bool DYNAMIC_OPS: True if ops/channel can be changed at runtime (OPL3+) |
| 117 |
// bool EG_HAS_DEPRESS: True if the chip has a DP ("depress"?) envelope stage (OPLL) |
| 118 |
// bool EG_HAS_REVERB: True if the chip has a faux reverb envelope stage (OPQ/OPZ) |
| 119 |
// bool EG_HAS_SSG: True if the chip has SSG envelope support (OPN) |
| 120 |
// bool MODULATOR_DELAY: True if the modulator is delayed by 1 sample (OPL pre-OPL3) |
| 121 |
// |
| 122 |
static constexpr bool DYNAMIC_OPS = false; |
| 123 |
static constexpr bool EG_HAS_DEPRESS = false; |
| 124 |
static constexpr bool EG_HAS_REVERB = false; |
| 125 |
static constexpr bool EG_HAS_SSG = false; |
| 126 |
static constexpr bool MODULATOR_DELAY = false; |
| 127 |
|
| 128 |
// system-wide register defaults |
| 129 |
uint32_t status_mask() const { return 0; } // OPL only |
| 130 |
uint32_t irq_reset() const { return 0; } // OPL only |
| 131 |
uint32_t noise_enable() const { return 0; } // OPM only |
| 132 |
uint32_t rhythm_enable() const { return 0; } // OPL only |
| 133 |
|
| 134 |
// per-operator register defaults |
| 135 |
uint32_t op_ssg_eg_enable(uint32_t /*opoffs*/) const { return 0; } // OPN(A) only |
| 136 |
uint32_t op_ssg_eg_mode(uint32_t /*opoffs*/) const { return 0; } // OPN(A) only |
| 137 |
|
| 138 |
protected: |
| 139 |
// helper to encode four operator numbers into a 32-bit value in the |
| 140 |
// operator maps for each register class |
| 141 |
static constexpr uint32_t operator_list(uint8_t o1 = 0xff, uint8_t o2 = 0xff, uint8_t o3 = 0xff, uint8_t o4 = 0xff) |
| 142 |
{ |
| 143 |
return o1 | (o2 << 8) | (o3 << 16) | (o4 << 24); |
| 144 |
} |
| 145 |
|
| 146 |
// helper to apply KSR to the raw ADSR rate, ignoring ksr if the |
| 147 |
// raw value is 0, and clamping to 63 |
| 148 |
static constexpr uint32_t effective_rate(uint32_t rawrate, uint32_t ksr) |
| 149 |
{ |
| 150 |
return (rawrate == 0) ? 0 : std::min<uint32_t>(rawrate + ksr, 63); |
| 151 |
} |
| 152 |
}; |
| 153 |
|
| 154 |
|
| 155 |
|
| 156 |
//********************************************************* |
| 157 |
// CORE ENGINE CLASSES |
| 158 |
//********************************************************* |
| 159 |
|
| 160 |
// forward declarations |
| 161 |
template<class RegisterType> class fm_engine_base; |
| 162 |
|
| 163 |
// ======================> fm_operator |
| 164 |
|
| 165 |
// fm_operator represents an FM operator (or "slot" in FM parlance), which |
| 166 |
// produces an output sine wave modulated by an envelope |
| 167 |
template<class RegisterType> |
| 168 |
class fm_operator |
| 169 |
{ |
| 170 |
// "quiet" value, used to optimize when we can skip doing work |
| 171 |
static constexpr uint32_t EG_QUIET = 0x380; |
| 172 |
|
| 173 |
public: |
| 174 |
// constructor |
| 175 |
fm_operator(fm_engine_base<RegisterType> &owner, uint32_t opoffs); |
| 176 |
|
| 177 |
// save/restore |
| 178 |
void save_restore(ymfm_saved_state &state); |
| 179 |
|
| 180 |
// reset the operator state |
| 181 |
void reset(); |
| 182 |
|
| 183 |
// return the operator/channel offset |
| 184 |
uint32_t opoffs() const { return m_opoffs; } |
| 185 |
uint32_t choffs() const { return m_choffs; } |
| 186 |
|
| 187 |
// set the current channel |
| 188 |
void set_choffs(uint32_t choffs) { m_choffs = choffs; } |
| 189 |
|
| 190 |
// prepare prior to clocking |
| 191 |
bool prepare(); |
| 192 |
|
| 193 |
// master clocking function |
| 194 |
void clock(uint32_t env_counter, int32_t lfo_raw_pm); |
| 195 |
|
| 196 |
// return the current phase value |
| 197 |
uint32_t phase() const { return m_phase >> 10; } |
| 198 |
|
| 199 |
// compute operator volume |
| 200 |
int32_t compute_volume(uint32_t phase, uint32_t am_offset) const; |
| 201 |
|
| 202 |
// compute volume for the OPM noise channel |
| 203 |
int32_t compute_noise_volume(uint32_t am_offset) const; |
| 204 |
|
| 205 |
// key state control |
| 206 |
void keyonoff(uint32_t on, keyon_type type); |
| 207 |
|
| 208 |
// return a reference to our registers |
| 209 |
RegisterType ®s() const { return m_regs; } |
| 210 |
|
| 211 |
// simple getters for debugging |
| 212 |
envelope_state debug_eg_state() const { return m_env_state; } |
| 213 |
uint16_t debug_eg_attenuation() const { return m_env_attenuation; } |
| 214 |
uint8_t debug_ssg_inverted() const { return m_ssg_inverted; } |
| 215 |
opdata_cache &debug_cache() { return m_cache; } |
| 216 |
|
| 217 |
private: |
| 218 |
// start the attack phase |
| 219 |
void start_attack(bool is_restart = false); |
| 220 |
|
| 221 |
// start the release phase |
| 222 |
void start_release(); |
| 223 |
|
| 224 |
// clock phases |
| 225 |
void clock_keystate(uint32_t keystate); |
| 226 |
void clock_ssg_eg_state(); |
| 227 |
void clock_envelope(uint32_t env_counter); |
| 228 |
void clock_phase(int32_t lfo_raw_pm); |
| 229 |
|
| 230 |
// return effective attenuation of the envelope |
| 231 |
uint32_t envelope_attenuation(uint32_t am_offset) const; |
| 232 |
|
| 233 |
// internal state |
| 234 |
uint32_t m_choffs; // channel offset in registers |
| 235 |
uint32_t m_opoffs; // operator offset in registers |
| 236 |
uint32_t m_phase; // current phase value (10.10 format) |
| 237 |
uint16_t m_env_attenuation; // computed envelope attenuation (4.6 format) |
| 238 |
envelope_state m_env_state; // current envelope state |
| 239 |
uint8_t m_ssg_inverted; // non-zero if the output should be inverted (bit 0) |
| 240 |
uint8_t m_key_state; // current key state: on or off (bit 0) |
| 241 |
uint8_t m_keyon_live; // live key on state (bit 0 = direct, bit 1 = rhythm, bit 2 = CSM) |
| 242 |
opdata_cache m_cache; // cached values for performance |
| 243 |
RegisterType &m_regs; // direct reference to registers |
| 244 |
fm_engine_base<RegisterType> &m_owner; // reference to the owning engine |
| 245 |
}; |
| 246 |
|
| 247 |
|
| 248 |
// ======================> fm_channel |
| 249 |
|
| 250 |
// fm_channel represents an FM channel which combines the output of 2 or 4 |
| 251 |
// operators into a final result |
| 252 |
template<class RegisterType> |
| 253 |
class fm_channel |
| 254 |
{ |
| 255 |
using output_data = ymfm_output<RegisterType::OUTPUTS>; |
| 256 |
|
| 257 |
public: |
| 258 |
// constructor |
| 259 |
fm_channel(fm_engine_base<RegisterType> &owner, uint32_t choffs); |
| 260 |
|
| 261 |
// save/restore |
| 262 |
void save_restore(ymfm_saved_state &state); |
| 263 |
|
| 264 |
// reset the channel state |
| 265 |
void reset(); |
| 266 |
|
| 267 |
// return the channel offset |
| 268 |
uint32_t choffs() const { return m_choffs; } |
| 269 |
|
| 270 |
// assign operators |
| 271 |
void assign(uint32_t index, fm_operator<RegisterType> *op) |
| 272 |
{ |
| 273 |
assert(index < array_size(m_op)); |
| 274 |
m_op[index] = op; |
| 275 |
if (op != nullptr) |
| 276 |
op->set_choffs(m_choffs); |
| 277 |
} |
| 278 |
|
| 279 |
// signal key on/off to our operators |
| 280 |
void keyonoff(uint32_t states, keyon_type type, uint32_t chnum); |
| 281 |
|
| 282 |
// prepare prior to clocking |
| 283 |
bool prepare(); |
| 284 |
|
| 285 |
// master clocking function |
| 286 |
void clock(uint32_t env_counter, int32_t lfo_raw_pm); |
| 287 |
|
| 288 |
// specific 2-operator and 4-operator output handlers |
| 289 |
void output_2op(output_data &output, uint32_t rshift, int32_t clipmax) const; |
| 290 |
void output_4op(output_data &output, uint32_t rshift, int32_t clipmax) const; |
| 291 |
|
| 292 |
// compute the special OPL rhythm channel outputs |
| 293 |
void output_rhythm_ch6(output_data &output, uint32_t rshift, int32_t clipmax) const; |
| 294 |
void output_rhythm_ch7(uint32_t phase_select, output_data &output, uint32_t rshift, int32_t clipmax) const; |
| 295 |
void output_rhythm_ch8(uint32_t phase_select, output_data &output, uint32_t rshift, int32_t clipmax) const; |
| 296 |
|
| 297 |
// are we a 4-operator channel or a 2-operator one? |
| 298 |
bool is4op() const |
| 299 |
{ |
| 300 |
if (RegisterType::DYNAMIC_OPS) |
| 301 |
return (m_op[2] != nullptr); |
| 302 |
return (RegisterType::OPERATORS / RegisterType::CHANNELS == 4); |
| 303 |
} |
| 304 |
|
| 305 |
// return a reference to our registers |
| 306 |
RegisterType ®s() const { return m_regs; } |
| 307 |
|
| 308 |
// simple getters for debugging |
| 309 |
fm_operator<RegisterType> *debug_operator(uint32_t index) const { return m_op[index]; } |
| 310 |
|
| 311 |
private: |
| 312 |
// helper to add values to the outputs based on channel enables |
| 313 |
void add_to_output(uint32_t choffs, output_data &output, int32_t value) const |
| 314 |
{ |
| 315 |
// create these constants to appease overzealous compilers checking array |
| 316 |
// bounds in unreachable code (looking at you, clang) |
| 317 |
constexpr int out0_index = 0; |
| 318 |
constexpr int out1_index = 1 % RegisterType::OUTPUTS; |
| 319 |
constexpr int out2_index = 2 % RegisterType::OUTPUTS; |
| 320 |
constexpr int out3_index = 3 % RegisterType::OUTPUTS; |
| 321 |
|
| 322 |
if (RegisterType::OUTPUTS == 1 || m_regs.ch_output_0(choffs)) |
| 323 |
output.data[out0_index] += value; |
| 324 |
if (RegisterType::OUTPUTS >= 2 && m_regs.ch_output_1(choffs)) |
| 325 |
output.data[out1_index] += value; |
| 326 |
if (RegisterType::OUTPUTS >= 3 && m_regs.ch_output_2(choffs)) |
| 327 |
output.data[out2_index] += value; |
| 328 |
if (RegisterType::OUTPUTS >= 4 && m_regs.ch_output_3(choffs)) |
| 329 |
output.data[out3_index] += value; |
| 330 |
} |
| 331 |
|
| 332 |
// internal state |
| 333 |
uint32_t m_choffs; // channel offset in registers |
| 334 |
int16_t m_feedback[2]; // feedback memory for operator 1 |
| 335 |
mutable int16_t m_feedback_in; // next input value for op 1 feedback (set in output) |
| 336 |
fm_operator<RegisterType> *m_op[4]; // up to 4 operators |
| 337 |
RegisterType &m_regs; // direct reference to registers |
| 338 |
fm_engine_base<RegisterType> &m_owner; // reference to the owning engine |
| 339 |
}; |
| 340 |
|
| 341 |
|
| 342 |
// ======================> fm_engine_base |
| 343 |
|
| 344 |
// fm_engine_base represents a set of operators and channels which together |
| 345 |
// form a Yamaha FM core; chips that implement other engines (ADPCM, wavetable, |
| 346 |
// etc) take this output and combine it with the others externally |
| 347 |
template<class RegisterType> |
| 348 |
class fm_engine_base : public ymfm_engine_callbacks |
| 349 |
{ |
| 350 |
public: |
| 351 |
// expose some constants from the registers |
| 352 |
static constexpr uint32_t OUTPUTS = RegisterType::OUTPUTS; |
| 353 |
static constexpr uint32_t CHANNELS = RegisterType::CHANNELS; |
| 354 |
static constexpr uint32_t ALL_CHANNELS = RegisterType::ALL_CHANNELS; |
| 355 |
static constexpr uint32_t OPERATORS = RegisterType::OPERATORS; |
| 356 |
|
| 357 |
// also expose status flags for consumers that inject additional bits |
| 358 |
static constexpr uint8_t STATUS_TIMERA = RegisterType::STATUS_TIMERA; |
| 359 |
static constexpr uint8_t STATUS_TIMERB = RegisterType::STATUS_TIMERB; |
| 360 |
static constexpr uint8_t STATUS_BUSY = RegisterType::STATUS_BUSY; |
| 361 |
static constexpr uint8_t STATUS_IRQ = RegisterType::STATUS_IRQ; |
| 362 |
|
| 363 |
// expose the correct output class |
| 364 |
using output_data = ymfm_output<OUTPUTS>; |
| 365 |
|
| 366 |
// constructor |
| 367 |
fm_engine_base(ymfm_interface &intf); |
| 368 |
|
| 369 |
// save/restore |
| 370 |
void save_restore(ymfm_saved_state &state); |
| 371 |
|
| 372 |
// reset the overall state |
| 373 |
void reset(); |
| 374 |
|
| 375 |
// master clocking function |
| 376 |
uint32_t clock(uint32_t chanmask); |
| 377 |
|
| 378 |
// compute sum of channel outputs |
| 379 |
void output(output_data &output, uint32_t rshift, int32_t clipmax, uint32_t chanmask) const; |
| 380 |
|
| 381 |
// write to the OPN registers |
| 382 |
void write(uint16_t regnum, uint8_t data); |
| 383 |
|
| 384 |
// return the current status |
| 385 |
uint8_t status() const; |
| 386 |
|
| 387 |
// set/reset bits in the status register, updating the IRQ status |
| 388 |
uint8_t set_reset_status(uint8_t set, uint8_t reset) |
| 389 |
{ |
| 390 |
m_status = (m_status | set) & ~(reset | STATUS_BUSY); |
| 391 |
m_intf.ymfm_sync_check_interrupts(); |
| 392 |
return m_status & ~m_regs.status_mask(); |
| 393 |
} |
| 394 |
|
| 395 |
// set the IRQ mask |
| 396 |
void set_irq_mask(uint8_t mask) { m_irq_mask = mask; m_intf.ymfm_sync_check_interrupts(); } |
| 397 |
|
| 398 |
// return the current clock prescale |
| 399 |
uint32_t clock_prescale() const { return m_clock_prescale; } |
| 400 |
|
| 401 |
// set prescale factor (2/3/6) |
| 402 |
void set_clock_prescale(uint32_t prescale) { m_clock_prescale = prescale; } |
| 403 |
|
| 404 |
// compute sample rate |
| 405 |
uint32_t sample_rate(uint32_t baseclock) const |
| 406 |
{ |
| 407 |
#if (DEBUG_LOG_WAVFILES) |
| 408 |
for (uint32_t chnum = 0; chnum < CHANNELS; chnum++) |
| 409 |
m_wavfile[chnum].set_samplerate(baseclock / (m_clock_prescale * OPERATORS)); |
| 410 |
#endif |
| 411 |
return baseclock / (m_clock_prescale * OPERATORS); |
| 412 |
} |
| 413 |
|
| 414 |
// return the owning device |
| 415 |
ymfm_interface &intf() const { return m_intf; } |
| 416 |
|
| 417 |
// return a reference to our registers |
| 418 |
RegisterType ®s() { return m_regs; } |
| 419 |
|
| 420 |
// invalidate any caches |
| 421 |
void invalidate_caches() { m_modified_channels = RegisterType::ALL_CHANNELS; } |
| 422 |
|
| 423 |
// simple getters for debugging |
| 424 |
fm_channel<RegisterType> *debug_channel(uint32_t index) const { return m_channel[index].get(); } |
| 425 |
fm_operator<RegisterType> *debug_operator(uint32_t index) const { return m_operator[index].get(); } |
| 426 |
|
| 427 |
public: |
| 428 |
// timer callback; called by the interface when a timer fires |
| 429 |
virtual void engine_timer_expired(uint32_t tnum) override; |
| 430 |
|
| 431 |
// check interrupts; called by the interface after synchronization |
| 432 |
virtual void engine_check_interrupts() override; |
| 433 |
|
| 434 |
// mode register write; called by the interface after synchronization |
| 435 |
virtual void engine_mode_write(uint8_t data) override; |
| 436 |
|
| 437 |
protected: |
| 438 |
// assign the current set of operators to channels |
| 439 |
void assign_operators(); |
| 440 |
|
| 441 |
// update the state of the given timer |
| 442 |
void update_timer(uint32_t which, uint32_t enable, int32_t delta_clocks); |
| 443 |
|
| 444 |
// internal state |
| 445 |
ymfm_interface &m_intf; // reference to the system interface |
| 446 |
uint32_t m_env_counter; // envelope counter; low 2 bits are sub-counter |
| 447 |
uint8_t m_status; // current status register |
| 448 |
uint8_t m_clock_prescale; // prescale factor (2/3/6) |
| 449 |
uint8_t m_irq_mask; // mask of which bits signal IRQs |
| 450 |
uint8_t m_irq_state; // current IRQ state |
| 451 |
uint8_t m_timer_running[2]; // current timer running state |
| 452 |
uint8_t m_total_clocks; // low 8 bits of the total number of clocks processed |
| 453 |
uint32_t m_active_channels; // mask of active channels (computed by prepare) |
| 454 |
uint32_t m_modified_channels; // mask of channels that have been modified |
| 455 |
uint32_t m_prepare_count; // counter to do periodic prepare sweeps |
| 456 |
RegisterType m_regs; // register accessor |
| 457 |
std::unique_ptr<fm_channel<RegisterType>> m_channel[CHANNELS]; // channel pointers |
| 458 |
std::unique_ptr<fm_operator<RegisterType>> m_operator[OPERATORS]; // operator pointers |
| 459 |
#if (DEBUG_LOG_WAVFILES) |
| 460 |
mutable ymfm_wavfile<1> m_wavfile[CHANNELS]; // for debugging |
| 461 |
#endif |
| 462 |
}; |
| 463 |
|
| 464 |
} |
| 465 |
|
| 466 |
#endif // YMFM_FM_H |