| 1 |
# Hey Emacs, this is a -*- makefile -*- |
| 2 |
|
| 3 |
# AVR-GCC Makefile template, derived from the WinAVR template (which |
| 4 |
# is public domain), believed to be neutral to any flavor of "make" |
| 5 |
# (GNU make, BSD make, SysV make) |
| 6 |
|
| 7 |
|
| 8 |
MCU = attiny13 |
| 9 |
#MCU = attiny45 |
| 10 |
FORMAT = ihex |
| 11 |
TARGET = asmdemo |
| 12 |
SRC = $(TARGET).c |
| 13 |
ASRC = isrs.S |
| 14 |
OPT = s |
| 15 |
|
| 16 |
# Name of this Makefile (used for "make depend"). |
| 17 |
MAKEFILE = Makefile |
| 18 |
|
| 19 |
# Compiler flag to set the C Standard level. |
| 20 |
# c89 - "ANSI" C |
| 21 |
# gnu89 - c89 plus GCC extensions |
| 22 |
# c99 - ISO C99 standard (not yet fully implemented) |
| 23 |
# gnu99 - c99 plus GCC extensions |
| 24 |
CSTANDARD = -std=gnu99 |
| 25 |
|
| 26 |
# Place -D or -U options here |
| 27 |
CDEFS = |
| 28 |
|
| 29 |
# Place -I options here |
| 30 |
CINCS = |
| 31 |
|
| 32 |
|
| 33 |
CDEBUG = -g |
| 34 |
CWARN = -Wall -Wstrict-prototypes |
| 35 |
CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums |
| 36 |
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) |
| 37 |
CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) |
| 38 |
|
| 39 |
|
| 40 |
#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
| 41 |
|
| 42 |
|
| 43 |
#Additional libraries. |
| 44 |
|
| 45 |
# Minimalistic printf version |
| 46 |
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
| 47 |
|
| 48 |
# Floating point printf version (requires MATH_LIB = -lm below) |
| 49 |
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
| 50 |
|
| 51 |
PRINTF_LIB = |
| 52 |
|
| 53 |
# Minimalistic scanf version |
| 54 |
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
| 55 |
|
| 56 |
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
| 57 |
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
| 58 |
|
| 59 |
SCANF_LIB = |
| 60 |
|
| 61 |
MATH_LIB = -lm |
| 62 |
|
| 63 |
# External memory options |
| 64 |
|
| 65 |
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
| 66 |
# used for variables (.data/.bss) and heap (malloc()). |
| 67 |
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
| 68 |
|
| 69 |
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
| 70 |
# only used for heap (malloc()). |
| 71 |
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff |
| 72 |
|
| 73 |
EXTMEMOPTS = |
| 74 |
|
| 75 |
#LDMAP = $(LDFLAGS) -Wl,-Map=$(TARGET).map,--cref |
| 76 |
LDFLAGS = $(EXTMEMOPTS) $(LDMAP) $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
| 77 |
|
| 78 |
|
| 79 |
# Programming support using avrdude. Settings and variables. |
| 80 |
|
| 81 |
AVRDUDE_PROGRAMMER = stk500v2 |
| 82 |
AVRDUDE_PORT = /dev/cuaa1 |
| 83 |
|
| 84 |
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
| 85 |
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
| 86 |
|
| 87 |
|
| 88 |
# Uncomment the following if you want avrdude's erase cycle counter. |
| 89 |
# Note that this counter needs to be initialized first using -Yn, |
| 90 |
# see avrdude manual. |
| 91 |
#AVRDUDE_ERASE_COUNTER = -y |
| 92 |
|
| 93 |
# Uncomment the following if you do /not/ wish a verification to be |
| 94 |
# performed after programming the device. |
| 95 |
#AVRDUDE_NO_VERIFY = -V |
| 96 |
|
| 97 |
# Increase verbosity level. Please use this when submitting bug |
| 98 |
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
| 99 |
# to submit bug reports. |
| 100 |
#AVRDUDE_VERBOSE = -v -v |
| 101 |
|
| 102 |
AVRDUDE_BASIC = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
| 103 |
AVRDUDE_FLAGS = $(AVRDUDE_BASIC) $(AVRDUDE_NO_VERIFY) $(AVRDUDE_VERBOSE) $(AVRDUDE_ERASE_COUNTER) |
| 104 |
|
| 105 |
|
| 106 |
CC = avr-gcc |
| 107 |
OBJCOPY = avr-objcopy |
| 108 |
OBJDUMP = avr-objdump |
| 109 |
SIZE = avr-size |
| 110 |
NM = avr-nm |
| 111 |
AVRDUDE = avrdude |
| 112 |
REMOVE = rm -f |
| 113 |
MV = mv -f |
| 114 |
|
| 115 |
# Define all object files. |
| 116 |
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
| 117 |
|
| 118 |
# Define all listing files. |
| 119 |
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) |
| 120 |
|
| 121 |
# Combine all necessary flags and optional flags. |
| 122 |
# Add target processor to flags. |
| 123 |
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) |
| 124 |
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
| 125 |
|
| 126 |
|
| 127 |
# Default target. |
| 128 |
all: build |
| 129 |
|
| 130 |
build: elf hex eep |
| 131 |
|
| 132 |
elf: $(TARGET).elf |
| 133 |
hex: $(TARGET).hex |
| 134 |
eep: $(TARGET).eep |
| 135 |
lss: $(TARGET).lss |
| 136 |
sym: $(TARGET).sym |
| 137 |
|
| 138 |
|
| 139 |
# Program the device. |
| 140 |
program: $(TARGET).hex $(TARGET).eep |
| 141 |
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
| 142 |
|
| 143 |
|
| 144 |
|
| 145 |
|
| 146 |
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
| 147 |
COFFCONVERT=$(OBJCOPY) --debugging \ |
| 148 |
--change-section-address .data-0x800000 \ |
| 149 |
--change-section-address .bss-0x800000 \ |
| 150 |
--change-section-address .noinit-0x800000 \ |
| 151 |
--change-section-address .eeprom-0x810000 |
| 152 |
|
| 153 |
|
| 154 |
coff: $(TARGET).elf |
| 155 |
$(COFFCONVERT) -O coff-avr $(TARGET).elf $(TARGET).cof |
| 156 |
|
| 157 |
|
| 158 |
extcoff: $(TARGET).elf |
| 159 |
$(COFFCONVERT) -O coff-ext-avr $(TARGET).elf $(TARGET).cof |
| 160 |
|
| 161 |
|
| 162 |
.SUFFIXES: .elf .hex .eep .lss .sym |
| 163 |
|
| 164 |
.elf.hex: |
| 165 |
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
| 166 |
|
| 167 |
.elf.eep: |
| 168 |
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
| 169 |
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
| 170 |
|
| 171 |
# Create extended listing file from ELF output file. |
| 172 |
.elf.lss: |
| 173 |
$(OBJDUMP) -h -S $< > $@ |
| 174 |
|
| 175 |
# Create a symbol table from ELF output file. |
| 176 |
.elf.sym: |
| 177 |
$(NM) -n $< > $@ |
| 178 |
|
| 179 |
|
| 180 |
|
| 181 |
# Link: create ELF output file from object files. |
| 182 |
$(TARGET).elf: $(OBJ) |
| 183 |
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) |
| 184 |
|
| 185 |
|
| 186 |
# Compile: create object files from C source files. |
| 187 |
.c.o: |
| 188 |
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
| 189 |
|
| 190 |
|
| 191 |
# Compile: create assembler files from C source files. |
| 192 |
.c.s: |
| 193 |
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
| 194 |
|
| 195 |
|
| 196 |
# Assemble: create object files from assembler source files. |
| 197 |
.S.o: |
| 198 |
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
| 199 |
|
| 200 |
|
| 201 |
|
| 202 |
# Target: clean project. |
| 203 |
clean: |
| 204 |
$(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf \ |
| 205 |
$(TARGET).map $(TARGET).sym $(TARGET).lss \ |
| 206 |
$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) |
| 207 |
|
| 208 |
depend: |
| 209 |
if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ |
| 210 |
then \ |
| 211 |
sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ |
| 212 |
$(MAKEFILE).$$$$ && \ |
| 213 |
$(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ |
| 214 |
fi |
| 215 |
echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ |
| 216 |
>> $(MAKEFILE); \ |
| 217 |
$(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) |
| 218 |
|
| 219 |
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend |
| 220 |
|
| 221 |
|