| 1 |
ENet 1.3.6 (December 11, 2012): |
| 2 |
|
| 3 |
* added support for intercept callback in ENetHost that can be used to process raw packets before ENet |
| 4 |
* added enet_socket_shutdown() for issuing shutdown on a socket |
| 5 |
* fixed enet_socket_connect() to not error on non-blocking connects |
| 6 |
* fixed bug in MTU negotiation during connections |
| 7 |
|
| 8 |
ENet 1.3.5 (July 31, 2012): |
| 9 |
|
| 10 |
* fixed bug in unreliable packet fragment queuing |
| 11 |
|
| 12 |
ENet 1.3.4 (May 29, 2012): |
| 13 |
|
| 14 |
* added enet_peer_ping_interval() for configuring per-peer ping intervals |
| 15 |
* added enet_peer_timeout() for configuring per-peer timeouts |
| 16 |
* added protocol packet size limits |
| 17 |
|
| 18 |
ENet 1.3.3 (June 28, 2011): |
| 19 |
|
| 20 |
* fixed bug with simultaneous disconnects not dispatching events |
| 21 |
|
| 22 |
ENet 1.3.2 (May 31, 2011): |
| 23 |
|
| 24 |
* added support for unreliable packet fragmenting via the packet flag |
| 25 |
ENET_PACKET_FLAG_UNRELIABLE_FRAGMENT |
| 26 |
* fixed regression in unreliable packet queuing |
| 27 |
* added check against received port to limit some forms of IP-spoofing |
| 28 |
|
| 29 |
ENet 1.3.1 (February 10, 2011): |
| 30 |
|
| 31 |
* fixed bug in tracking of reliable data in transit |
| 32 |
* reliable data window size now scales with the throttle |
| 33 |
* fixed bug in fragment length calculation when checksums are used |
| 34 |
|
| 35 |
ENet 1.3.0 (June 5, 2010): |
| 36 |
|
| 37 |
* enet_host_create() now requires the channel limit to be specified as |
| 38 |
a parameter |
| 39 |
* enet_host_connect() now accepts a data parameter which is supplied |
| 40 |
to the receiving receiving host in the event data field for a connect event |
| 41 |
* added an adaptive order-2 PPM range coder as a built-in compressor option |
| 42 |
which can be set with enet_host_compress_with_range_coder() |
| 43 |
* added support for packet compression configurable with a callback |
| 44 |
* improved session number handling to not rely on the packet checksum |
| 45 |
field, saving 4 bytes per packet unless the checksum option is used |
| 46 |
* removed the dependence on the rand callback for session number handling |
| 47 |
|
| 48 |
Caveats: This version is not protocol compatible with the 1.2 series or |
| 49 |
earlier. The enet_host_connect and enet_host_create API functions require |
| 50 |
supplying additional parameters. |
| 51 |
|
| 52 |
ENet 1.2.5 (June 28, 2011): |
| 53 |
|
| 54 |
* fixed bug with simultaneous disconnects not dispatching events |
| 55 |
|
| 56 |
ENet 1.2.4 (May 31, 2011): |
| 57 |
|
| 58 |
* fixed regression in unreliable packet queuing |
| 59 |
* added check against received port to limit some forms of IP-spoofing |
| 60 |
|
| 61 |
ENet 1.2.3 (February 10, 2011): |
| 62 |
|
| 63 |
* fixed bug in tracking reliable data in transit |
| 64 |
|
| 65 |
ENet 1.2.2 (June 5, 2010): |
| 66 |
|
| 67 |
* checksum functionality is now enabled by setting a checksum callback |
| 68 |
inside ENetHost instead of being a configure script option |
| 69 |
* added totalSentData, totalSentPackets, totalReceivedData, and |
| 70 |
totalReceivedPackets counters inside ENetHost for getting usage |
| 71 |
statistics |
| 72 |
* added enet_host_channel_limit() for limiting the maximum number of |
| 73 |
channels allowed by connected peers |
| 74 |
* now uses dispatch queues for event dispatch rather than potentially |
| 75 |
unscalable array walking |
| 76 |
* added no_memory callback that is called when a malloc attempt fails, |
| 77 |
such that if no_memory returns rather than aborts (the default behavior), |
| 78 |
then the error is propagated to the return value of the API calls |
| 79 |
* now uses packed attribute for protocol structures on platforms with |
| 80 |
strange alignment rules |
| 81 |
* improved autoconf build system contributed by Nathan Brink allowing |
| 82 |
for easier building as a shared library |
| 83 |
|
| 84 |
Caveats: If you were using the compile-time option that enabled checksums, |
| 85 |
make sure to set the checksum callback inside ENetHost to enet_crc32 to |
| 86 |
regain the old behavior. The ENetCallbacks structure has added new fields, |
| 87 |
so make sure to clear the structure to zero before use if |
| 88 |
using enet_initialize_with_callbacks(). |
| 89 |
|
| 90 |
ENet 1.2.1 (November 12, 2009): |
| 91 |
|
| 92 |
* fixed bug that could cause disconnect events to be dropped |
| 93 |
* added thin wrapper around select() for portable usage |
| 94 |
* added ENET_SOCKOPT_REUSEADDR socket option |
| 95 |
* factored enet_socket_bind()/enet_socket_listen() out of enet_socket_create() |
| 96 |
* added contributed Code::Blocks build file |
| 97 |
|
| 98 |
ENet 1.2 (February 12, 2008): |
| 99 |
|
| 100 |
* fixed bug in VERIFY_CONNECT acknowledgement that could cause connect |
| 101 |
attempts to occasionally timeout |
| 102 |
* fixed acknowledgements to check both the outgoing and sent queues |
| 103 |
when removing acknowledged packets |
| 104 |
* fixed accidental bit rot in the MSVC project file |
| 105 |
* revised sequence number overflow handling to address some possible |
| 106 |
disconnect bugs |
| 107 |
* added enet_host_check_events() for getting only local queued events |
| 108 |
* factored out socket option setting into enet_socket_set_option() so |
| 109 |
that socket options are now set separately from enet_socket_create() |
| 110 |
|
| 111 |
Caveats: While this release is superficially protocol compatible with 1.1, |
| 112 |
differences in the sequence number overflow handling can potentially cause |
| 113 |
random disconnects. |
| 114 |
|
| 115 |
ENet 1.1 (June 6, 2007): |
| 116 |
|
| 117 |
* optional CRC32 just in case someone needs a stronger checksum than UDP |
| 118 |
provides (--enable-crc32 configure option) |
| 119 |
* the size of packet headers are half the size they used to be (so less |
| 120 |
overhead when sending small packets) |
| 121 |
* enet_peer_disconnect_later() that waits till all queued outgoing |
| 122 |
packets get sent before issuing an actual disconnect |
| 123 |
* freeCallback field in individual packets for notification of when a |
| 124 |
packet is about to be freed |
| 125 |
* ENET_PACKET_FLAG_NO_ALLOCATE for supplying pre-allocated data to a |
| 126 |
packet (can be used in concert with freeCallback to support some custom |
| 127 |
allocation schemes that the normal memory allocation callbacks would |
| 128 |
normally not allow) |
| 129 |
* enet_address_get_host_ip() for printing address numbers |
| 130 |
* promoted the enet_socket_*() functions to be part of the API now |
| 131 |
* a few stability/crash fixes |
| 132 |
|
| 133 |
|