| 1 |
Description: |
| 2 |
------------ |
| 3 |
Tool 'create_pbl' is a standalone tool to create the PBL images. |
| 4 |
where, |
| 5 |
On the basis of Chassis, |
| 6 |
RCW image is placed first followed by the, |
| 7 |
PBI commands to copy the, |
| 8 |
Input BL2 image stored on the, |
| 9 |
Specified boot source (QSPI or SD or NOR) to the, |
| 10 |
Specified destination address. |
| 11 |
|
| 12 |
|
| 13 |
Usage in standalone way: |
| 14 |
----------------------- |
| 15 |
|
| 16 |
./create_pbl [options] (mentioned below): |
| 17 |
|
| 18 |
-r <RCW file-name> - name of RCW binary file. |
| 19 |
-i <BL2 Bin file-name> - file to be added to rcw file. |
| 20 |
-c <SoC Number> - SoC numeric identifier, may be one of |
| 21 |
1012,1023,1026.1028, |
| 22 |
1043,1046,1088,2080, |
| 23 |
2088,2160 |
| 24 |
-b <boot source id> - Boot source id string, may be one of |
| 25 |
"qspi", "nor", "nand", "sd", "emmc" |
| 26 |
-d <Address> - Destination address where BL2 |
| 27 |
image is to be copied |
| 28 |
-o <output filename> - Name of PBL image generated |
| 29 |
as an output of the tool. |
| 30 |
-e <Address> - [Optional] Entry Point Address |
| 31 |
of the BL2.bin |
| 32 |
-f <Address> - BL2 image offset |
| 33 |
on Boot Source for block copy. |
| 34 |
command for chassis >=3.) |
| 35 |
(Must for Ch3, Ignored for Ch2) |
| 36 |
-h Help. |
| 37 |
-s Secure boot. |
| 38 |
|
| 39 |
-s secure boot |
| 40 |
-c SoC Number (see description above) |
| 41 |
-b Boot source. |
| 42 |
-r RCW binary file. |
| 43 |
-i Input file that is to be added to rcw file. |
| 44 |
-o Name of output file |
| 45 |
-f Source Offset (Block Copy) |
| 46 |
-d Destination address to which file has to be copied |
| 47 |
-h Help. |
| 48 |
|
| 49 |
Example: |
| 50 |
./create_pbl -r <RCW file> -i <bl2.bin> -c <chassis_no> -b <boot_source = sd/qspi/nor> -d <Destination_Addr> -o <pbl_image_name> |
| 51 |
|
| 52 |
|
| 53 |
|
| 54 |
Usage at compilation time: |
| 55 |
-------------------------------- |
| 56 |
|
| 57 |
make <compilation command......> pbl RCW=<Path_to_RCW_File>/<rcw_file_name.bin> |
| 58 |
|
| 59 |
Example: QSPI Boot For LS1046ARDB- |
| 60 |
|
| 61 |
make PLAT=ls1046rdb all fip BOOT_MODE=qspi SPD=opteed BL32=tee.bin BL33=u-boot-ls1046.bin pbl RCW=/home/pankaj/flexbuild/packages/firmware/dash-rcw/ls1046ardb/RR_FFSSPPPN_1133_5506/rcw_1600_qspiboot.bin |
| 62 |
|
| 63 |
Example: QSPI Boot For LX2160ARDB- |
| 64 |
|
| 65 |
make PLAT=lx2160ardb all fip BOOT_MODE=flexspi_nor SPD=opteed BL32=tee_lx2.bin BL33=u-boot_lx2160.bin pbl RCW=plat/nxp/soc-lx2160/lx2160ardb/rcw_1900_600_1600_19_5_2.bin |