Debian Codegraph @

plat/xilinx/zynqmp/bl31_zynqmp_setup.c

raw
1 /*
2 * Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved.
3 * Copyright (c) 2023-2024, Advanced Micro Devices, Inc. All rights reserved.
4 *
5 * SPDX-License-Identifier: BSD-3-Clause
6 */
7
8 #include <assert.h>
9 #include <errno.h>
10
11 #include <bl31/bl31.h>
12 #include <common/bl_common.h>
13 #include <common/debug.h>
14 #include <common/fdt_fixup.h>
15 #include <common/fdt_wrappers.h>
16 #include <lib/mmio.h>
17 #include <lib/xlat_tables/xlat_tables_v2.h>
18 #include <libfdt.h>
19 #include <plat/arm/common/plat_arm.h>
20 #include <plat/common/platform.h>
21 #include <plat_console.h>
22
23 #include <custom_svc.h>
24 #include <plat_fdt.h>
25 #include <plat_private.h>
26 #include <plat_startup.h>
27 #include <zynqmp_def.h>
28
29
30 static entry_point_info_t bl32_image_ep_info;
31 static entry_point_info_t bl33_image_ep_info;
32
33 /*
34 * Return a pointer to the 'entry_point_info' structure of the next image for
35 * the security state specified. BL33 corresponds to the non-secure image type
36 * while BL32 corresponds to the secure image type. A NULL pointer is returned
37 * if the image does not exist.
38 */
39 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type)
40 {
41 entry_point_info_t *next_image_info;
42
43 assert(sec_state_is_valid(type));
44 if (type == NON_SECURE) {
45 next_image_info = &bl33_image_ep_info;
46 } else {
47 next_image_info = &bl32_image_ep_info;
48 }
49
50 return next_image_info;
51 }
52
53 /*
54 * Set the build time defaults. We want to do this when doing a JTAG boot
55 * or if we can't find any other config data.
56 */
57 static inline void bl31_set_default_config(void)
58 {
59 bl32_image_ep_info.pc = BL32_BASE;
60 bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry();
61 bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
62 bl33_image_ep_info.spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
63 DISABLE_ALL_EXCEPTIONS);
64 }
65
66 /*
67 * Perform any BL31 specific platform actions. Here is an opportunity to copy
68 * parameters passed by the calling EL (S-EL1 in BL2 & EL3 in BL1) before they
69 * are lost (potentially). This needs to be done before the MMU is initialized
70 * so that the memory layout can be used while creating page tables.
71 */
72 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
73 u_register_t arg2, u_register_t arg3)
74 {
75 (void)arg0;
76 (void)arg1;
77 (void)arg2;
78 (void)arg3;
79 uint64_t tfa_handoff_addr;
80
81 setup_console();
82
83 /* Initialize the platform config for future decision making */
84 zynqmp_config_setup();
85
86 /*
87 * Do initial security configuration to allow DRAM/device access. On
88 * Base ZYNQMP only DRAM security is programmable (via TrustZone), but
89 * other platforms might have more programmable security devices
90 * present.
91 */
92
93 /* Populate common information for BL32 and BL33 */
94 SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
95 SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
96 SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0);
97 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
98
99 tfa_handoff_addr = mmio_read_32(PMU_GLOBAL_GEN_STORAGE6);
100
101 if (zynqmp_get_bootmode() == ZYNQMP_BOOTMODE_JTAG) {
102 bl31_set_default_config();
103 } else {
104 /* use parameters from XBL */
105 enum xbl_handoff ret = xbl_handover(&bl32_image_ep_info,
106 &bl33_image_ep_info,
107 tfa_handoff_addr);
108 if (ret != XBL_HANDOFF_SUCCESS) {
109 panic();
110 }
111 }
112 if (bl32_image_ep_info.pc != 0) {
113 NOTICE("BL31: Secure code at 0x%lx\n", bl32_image_ep_info.pc);
114 }
115 if (bl33_image_ep_info.pc != 0) {
116 NOTICE("BL31: Non secure code at 0x%lx\n", bl33_image_ep_info.pc);
117 }
118
119 custom_early_setup();
120
121 }
122
123 #if ZYNQMP_WDT_RESTART
124 static zynmp_intr_info_type_el3_t type_el3_interrupt_table[MAX_INTR_EL3];
125
126 int request_intr_type_el3(uint32_t id, interrupt_type_handler_t handler)
127 {
128 static uint32_t index;
129 uint32_t i;
130
131 /* Validate 'handler' and 'id' parameters */
132 if (!handler || index >= MAX_INTR_EL3) {
133 return -EINVAL;
134 }
135
136 /* Check if a handler has already been registered */
137 for (i = 0; i < index; i++) {
138 if (id == type_el3_interrupt_table[i].id) {
139 return -EALREADY;
140 }
141 }
142
143 type_el3_interrupt_table[index].id = id;
144 type_el3_interrupt_table[index].handler = handler;
145
146 index++;
147
148 return 0;
149 }
150
151 static uint64_t rdo_el3_interrupt_handler(uint32_t id, uint32_t flags,
152 void *handle, void *cookie)
153 {
154 uint32_t intr_id;
155 uint32_t i;
156 interrupt_type_handler_t handler = NULL;
157
158 intr_id = plat_ic_get_pending_interrupt_id();
159
160 for (i = 0; i < MAX_INTR_EL3; i++) {
161 if (intr_id == type_el3_interrupt_table[i].id) {
162 handler = type_el3_interrupt_table[i].handler;
163 }
164 }
165
166 if (handler != NULL) {
167 return handler(intr_id, flags, handle, cookie);
168 }
169
170 return 0;
171 }
172 #endif
173
174 void bl31_platform_setup(void)
175 {
176 prepare_dtb();
177
178 /* Initialize the gic cpu and distributor interfaces */
179 plat_arm_gic_driver_init();
180 plat_arm_gic_init();
181 }
182
183 void bl31_plat_runtime_setup(void)
184 {
185 #if ZYNQMP_WDT_RESTART
186 uint64_t flags = 0;
187 uint64_t rc;
188
189 set_interrupt_rm_flag(flags, NON_SECURE);
190 rc = register_interrupt_type_handler(INTR_TYPE_EL3,
191 rdo_el3_interrupt_handler, flags);
192 if (rc) {
193 panic();
194 }
195 #endif
196
197 custom_runtime_setup();
198 }
199
200 /*
201 * Perform the very early platform specific architectural setup here.
202 */
203 void bl31_plat_arch_setup(void)
204 {
205 plat_arm_interconnect_init();
206 plat_arm_interconnect_enter_coherency();
207
208 const mmap_region_t bl_regions[] = {
209 #if (defined(XILINX_OF_BOARD_DTB_ADDR) && !IS_TFA_IN_OCM(BL31_BASE))
210 MAP_REGION_FLAT(XILINX_OF_BOARD_DTB_ADDR, XILINX_OF_BOARD_DTB_MAX_SIZE,
211 MT_MEMORY | MT_RW | MT_NS),
212 #endif
213 MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
214 MT_MEMORY | MT_RW | MT_SECURE),
215 MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
216 MT_CODE | MT_SECURE),
217 MAP_REGION_FLAT(BL_RO_DATA_BASE, BL_RO_DATA_END - BL_RO_DATA_BASE,
218 MT_RO_DATA | MT_SECURE),
219 MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
220 BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
221 MT_DEVICE | MT_RW | MT_SECURE),
222 {0}
223 };
224
225 custom_mmap_add();
226
227 setup_page_tables(bl_regions, plat_get_mmap());
228 enable_mmu(0);
229 }