Debian Codegraph @

plat/xilinx/versal_net/bl31_versal_net_setup.c

raw
1 /*
2 * Copyright (c) 2018-2024, Arm Limited and Contributors. All rights reserved.
3 * Copyright (c) 2018-2022, Xilinx, Inc. All rights reserved.
4 * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
5 *
6 * SPDX-License-Identifier: BSD-3-Clause
7 */
8
9 #include <assert.h>
10 #include <errno.h>
11
12 #include <bl31/bl31.h>
13 #include <common/bl_common.h>
14 #include <common/debug.h>
15 #include <lib/mmio.h>
16 #include <lib/xlat_tables/xlat_tables_v2.h>
17 #include <plat/common/platform.h>
18 #include <plat_arm.h>
19 #include <plat_console.h>
20 #include <plat_clkfunc.h>
21
22 #include <plat_fdt.h>
23 #include <plat_private.h>
24 #include <plat_startup.h>
25 #include <pm_api_sys.h>
26 #include <pm_client.h>
27 #include <pm_ipi.h>
28 #include <versal_net_def.h>
29
30 static entry_point_info_t bl32_image_ep_info;
31 static entry_point_info_t bl33_image_ep_info;
32
33 /*
34 * Return a pointer to the 'entry_point_info' structure of the next image for
35 * the security state specified. BL33 corresponds to the non-secure image type
36 * while BL32 corresponds to the secure image type. A NULL pointer is returned
37 * if the image does not exist.
38 */
39 entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
40 {
41 assert(sec_state_is_valid(type));
42
43 if (type == NON_SECURE) {
44 return &bl33_image_ep_info;
45 }
46
47 return &bl32_image_ep_info;
48 }
49
50 /*
51 * Set the build time defaults,if we can't find any config data.
52 */
53 static inline void bl31_set_default_config(void)
54 {
55 bl32_image_ep_info.pc = BL32_BASE;
56 bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry();
57 bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
58 bl33_image_ep_info.spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
59 DISABLE_ALL_EXCEPTIONS);
60 }
61
62 /* Define read and write function for clusterbusqos register */
63 DEFINE_RENAME_SYSREG_RW_FUNCS(cluster_bus_qos, S3_0_C15_C4_4)
64
65 static void versal_net_setup_qos(void)
66 {
67 int ret;
68
69 ret = read_cluster_bus_qos();
70 INFO("BL31: default cluster bus qos: 0x%x\n", ret);
71 write_cluster_bus_qos(0);
72 ret = read_cluster_bus_qos();
73 INFO("BL31: cluster bus qos written: 0x%x\n", ret);
74 }
75
76 /*
77 * Perform any BL31 specific platform actions. Here is an opportunity to copy
78 * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they
79 * are lost (potentially). This needs to be done before the MMU is initialized
80 * so that the memory layout can be used while creating page tables.
81 */
82 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
83 u_register_t arg2, u_register_t arg3)
84 {
85 (void)arg0;
86 (void)arg1;
87 (void)arg2;
88 (void)arg3;
89
90 #if !(TFA_NO_PM)
91 uint64_t tfa_handoff_addr, buff[HANDOFF_PARAMS_MAX_SIZE] = {0};
92 uint32_t payload[PAYLOAD_ARG_CNT], max_size = HANDOFF_PARAMS_MAX_SIZE;
93 enum pm_ret_status ret_status;
94 #endif /* !(TFA_NO_PM) */
95
96 board_detection();
97
98 switch (platform_id) {
99 case VERSAL_NET_SPP:
100 cpu_clock = 1000000;
101 break;
102 case VERSAL_NET_EMU:
103 cpu_clock = 3660000;
104 break;
105 case VERSAL_NET_QEMU:
106 /* Random values now */
107 cpu_clock = 100000000;
108 break;
109 case VERSAL_NET_SILICON:
110 cpu_clock = 100000000;
111 break;
112 default:
113 panic();
114 }
115
116 syscnt_freq_config_setup();
117
118 set_cnt_freq();
119
120 setup_console();
121
122 NOTICE("TF-A running on %s %d.%d\n", board_name_decode(),
123 platform_version / 10U, platform_version % 10U);
124
125 versal_net_setup_qos();
126
127 /* Initialize the platform config for future decision making */
128 versal_net_config_setup();
129
130 /*
131 * Do initial security configuration to allow DRAM/device access. On
132 * Base VERSAL_NET only DRAM security is programmable (via TrustZone), but
133 * other platforms might have more programmable security devices
134 * present.
135 */
136
137 /* Populate common information for BL32 and BL33 */
138 SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
139 SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
140 SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0);
141 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
142 #if !(TFA_NO_PM)
143 PM_PACK_PAYLOAD4(payload, LOADER_MODULE_ID, 1, PM_LOAD_GET_HANDOFF_PARAMS,
144 (uintptr_t)buff >> 32U, (uintptr_t)buff, max_size);
145
146 ret_status = pm_ipi_send_sync(primary_proc, payload, NULL, 0);
147 if (ret_status == PM_RET_SUCCESS) {
148 enum xbl_handoff xbl_ret;
149
150 tfa_handoff_addr = (uintptr_t)&buff;
151
152 xbl_ret = xbl_handover(&bl32_image_ep_info, &bl33_image_ep_info,
153 tfa_handoff_addr);
154 if (xbl_ret != XBL_HANDOFF_SUCCESS) {
155 ERROR("BL31: PLM to TF-A handover failed %u\n", xbl_ret);
156 panic();
157 }
158
159 INFO("BL31: PLM to TF-A handover success\n");
160
161 } else {
162 INFO("BL31: setting up default configs\n");
163
164 bl31_set_default_config();
165 }
166 #else
167 bl31_set_default_config();
168 #endif /* !(TFA_NO_PM) */
169
170 NOTICE("BL31: Secure code at 0x%lx\n", bl32_image_ep_info.pc);
171 NOTICE("BL31: Non secure code at 0x%lx\n", bl33_image_ep_info.pc);
172 }
173
174 static versal_intr_info_type_el3_t type_el3_interrupt_table[MAX_INTR_EL3];
175
176 int request_intr_type_el3(uint32_t id, interrupt_type_handler_t handler)
177 {
178 static uint32_t index;
179 uint32_t i;
180
181 /* Validate 'handler' and 'id' parameters */
182 if ((handler == NULL) || (index >= MAX_INTR_EL3)) {
183 return -EINVAL;
184 }
185
186 /* Check if a handler has already been registered */
187 for (i = 0; i < index; i++) {
188 if (id == type_el3_interrupt_table[i].id) {
189 return -EALREADY;
190 }
191 }
192
193 type_el3_interrupt_table[index].id = id;
194 type_el3_interrupt_table[index].handler = handler;
195
196 index++;
197
198 return 0;
199 }
200
201 static uint64_t rdo_el3_interrupt_handler(uint32_t id, uint32_t flags,
202 void *handle, void *cookie)
203 {
204 uint32_t intr_id;
205 uint32_t i;
206 interrupt_type_handler_t handler = NULL;
207
208 intr_id = plat_ic_get_pending_interrupt_id();
209
210 for (i = 0; i < MAX_INTR_EL3; i++) {
211 if (intr_id == type_el3_interrupt_table[i].id) {
212 handler = type_el3_interrupt_table[i].handler;
213 }
214 }
215
216 if (handler != NULL) {
217 (void)handler(intr_id, flags, handle, cookie);
218 }
219
220 return 0;
221 }
222
223 void bl31_platform_setup(void)
224 {
225 prepare_dtb();
226
227 /* Initialize the gic cpu and distributor interfaces */
228 plat_arm_gic_driver_init();
229 plat_arm_gic_init();
230 }
231
232 void bl31_plat_runtime_setup(void)
233 {
234 uint64_t flags = 0;
235 int32_t rc;
236
237 set_interrupt_rm_flag(flags, NON_SECURE);
238 rc = register_interrupt_type_handler(INTR_TYPE_EL3,
239 rdo_el3_interrupt_handler, flags);
240 if (rc != 0) {
241 panic();
242 }
243 }
244
245 /*
246 * Perform the very early platform specific architectural setup here.
247 */
248 void bl31_plat_arch_setup(void)
249 {
250 const mmap_region_t bl_regions[] = {
251 #if (defined(XILINX_OF_BOARD_DTB_ADDR) && !IS_TFA_IN_OCM(BL31_BASE))
252 MAP_REGION_FLAT(XILINX_OF_BOARD_DTB_ADDR, XILINX_OF_BOARD_DTB_MAX_SIZE,
253 MT_MEMORY | MT_RW | MT_NS),
254 #endif
255 MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
256 MT_MEMORY | MT_RW | MT_SECURE),
257 MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
258 MT_CODE | MT_SECURE),
259 MAP_REGION_FLAT(BL_RO_DATA_BASE, BL_RO_DATA_END - BL_RO_DATA_BASE,
260 MT_RO_DATA | MT_SECURE),
261 {0}
262 };
263
264 setup_page_tables(bl_regions, plat_get_mmap());
265 enable_mmu(0);
266 }