Debian Codegraph @

plat/xilinx/versal/bl31_versal_setup.c

raw
1 /*
2 * Copyright (c) 2018-2024, Arm Limited and Contributors. All rights reserved.
3 * Copyright (c) 2018-2022, Xilinx, Inc. All rights reserved.
4 * Copyright (c) 2022-2024, Advanced Micro Devices, Inc. All rights reserved.
5 *
6 * SPDX-License-Identifier: BSD-3-Clause
7 */
8
9 #include <assert.h>
10 #include <errno.h>
11
12 #include <bl31/bl31.h>
13 #include <common/bl_common.h>
14 #include <common/debug.h>
15 #include <drivers/generic_delay_timer.h>
16 #include <lib/mmio.h>
17 #include <lib/xlat_tables/xlat_tables_v2.h>
18 #include <plat/common/platform.h>
19 #include <plat_arm.h>
20 #include <plat_console.h>
21 #include <plat_clkfunc.h>
22
23 #include <plat_fdt.h>
24 #include <plat_private.h>
25 #include <plat_startup.h>
26 #include "pm_api_sys.h"
27 #include "pm_client.h"
28 #include <pm_ipi.h>
29 #include <versal_def.h>
30
31 static entry_point_info_t bl32_image_ep_info;
32 static entry_point_info_t bl33_image_ep_info;
33
34 /*
35 * Return a pointer to the 'entry_point_info' structure of the next image for
36 * the security state specified. BL33 corresponds to the non-secure image type
37 * while BL32 corresponds to the secure image type. A NULL pointer is returned
38 * if the image does not exist.
39 */
40 entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
41 {
42 assert(sec_state_is_valid(type));
43
44 if (type == NON_SECURE) {
45 return &bl33_image_ep_info;
46 }
47
48 return &bl32_image_ep_info;
49 }
50
51 /*
52 * Set the build time defaults,if we can't find any config data.
53 */
54 static inline void bl31_set_default_config(void)
55 {
56 bl32_image_ep_info.pc = (uintptr_t)BL32_BASE;
57 bl32_image_ep_info.spsr = (uint32_t)arm_get_spsr_for_bl32_entry();
58 bl33_image_ep_info.pc = (uintptr_t)plat_get_ns_image_entrypoint();
59 bl33_image_ep_info.spsr = (uint32_t)SPSR_64(MODE_EL2, MODE_SP_ELX,
60 DISABLE_ALL_EXCEPTIONS);
61 }
62
63 /*
64 * Perform any BL31 specific platform actions. Here is an opportunity to copy
65 * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they
66 * are lost (potentially). This needs to be done before the MMU is initialized
67 * so that the memory layout can be used while creating page tables.
68 */
69 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
70 u_register_t arg2, u_register_t arg3)
71 {
72 (void)arg0;
73 (void)arg1;
74 (void)arg2;
75 (void)arg3;
76 uint64_t tfa_handoff_addr;
77 uint32_t payload[PAYLOAD_ARG_CNT], max_size = HANDOFF_PARAMS_MAX_SIZE;
78 enum pm_ret_status ret_status;
79 const uint64_t addr[HANDOFF_PARAMS_MAX_SIZE];
80
81 /*
82 * Do initial security configuration to allow DRAM/device access. On
83 * Base VERSAL only DRAM security is programmable (via TrustZone), but
84 * other platforms might have more programmable security devices
85 * present.
86 */
87 versal_config_setup();
88
89 /* Initialize the platform config for future decision making */
90 board_detection();
91
92 switch (platform_id) {
93 case VERSAL_SPP:
94 cpu_clock = 2720000;
95 break;
96 case VERSAL_EMU:
97 cpu_clock = 212000;
98 break;
99 case VERSAL_QEMU:
100 case VERSAL_SILICON:
101 cpu_clock = 100000000;
102 break;
103 default:
104 panic();
105 }
106 set_cnt_freq();
107
108 generic_delay_timer_init();
109
110 setup_console();
111
112 NOTICE("TF-A running on %s %d\n", board_name_decode(), platform_version);
113
114 /* Populate common information for BL32 and BL33 */
115 SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
116 SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
117 SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0);
118 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
119
120 PM_PACK_PAYLOAD4(payload, LOADER_MODULE_ID, 1, PM_LOAD_GET_HANDOFF_PARAMS,
121 (uintptr_t)addr >> 32U, (uintptr_t)addr, max_size);
122 ret_status = pm_ipi_send_sync(primary_proc, payload, NULL, 0);
123 if (ret_status == PM_RET_SUCCESS) {
124 INFO("BL31: GET_HANDOFF_PARAMS call success=%d\n", ret_status);
125 tfa_handoff_addr = (uintptr_t)&addr;
126 } else {
127 ERROR("BL31: GET_HANDOFF_PARAMS Failed, read tfa_handoff_addr from reg\n");
128 tfa_handoff_addr = mmio_read_32(PMC_GLOBAL_GLOB_GEN_STORAGE4);
129 }
130
131 enum xbl_handoff ret = xbl_handover(&bl32_image_ep_info,
132 &bl33_image_ep_info,
133 tfa_handoff_addr);
134 if ((ret == XBL_HANDOFF_NO_STRUCT) || (ret == XBL_HANDOFF_INVAL_STRUCT)) {
135 bl31_set_default_config();
136 } else if (ret == XBL_HANDOFF_TOO_MANY_PARTS) {
137 ERROR("BL31: Error too many partitions %u\n", ret);
138 } else if (ret != XBL_HANDOFF_SUCCESS) {
139 panic();
140 } else {
141 INFO("BL31: PLM to TF-A handover success %u\n", ret);
142 }
143
144 NOTICE("BL31: Secure code at 0x%lx\n", bl32_image_ep_info.pc);
145 NOTICE("BL31: Non secure code at 0x%lx\n", bl33_image_ep_info.pc);
146 }
147
148 static versal_intr_info_type_el3_t type_el3_interrupt_table[MAX_INTR_EL3];
149
150 int request_intr_type_el3(uint32_t id, interrupt_type_handler_t handler)
151 {
152 static uint32_t index;
153 uint32_t i;
154
155 /* Validate 'handler' and 'id' parameters */
156 if ((handler == NULL) || (index >= MAX_INTR_EL3)) {
157 return -EINVAL;
158 }
159
160 /* Check if a handler has already been registered */
161 for (i = 0; i < index; i++) {
162 if (id == type_el3_interrupt_table[i].id) {
163 return -EALREADY;
164 }
165 }
166
167 type_el3_interrupt_table[index].id = id;
168 type_el3_interrupt_table[index].handler = handler;
169
170 index++;
171
172 return 0;
173 }
174
175 static uint64_t rdo_el3_interrupt_handler(uint32_t id, uint32_t flags,
176 void *handle, void *cookie)
177 {
178 (void)id;
179 uint32_t intr_id;
180 uint32_t i;
181 interrupt_type_handler_t handler = NULL;
182
183 intr_id = plat_ic_get_pending_interrupt_id();
184
185 for (i = 0; i < MAX_INTR_EL3; i++) {
186 if (intr_id == type_el3_interrupt_table[i].id) {
187 handler = type_el3_interrupt_table[i].handler;
188 }
189 }
190
191 if (handler != NULL) {
192 return handler(intr_id, flags, handle, cookie);
193 }
194
195 return 0;
196 }
197
198 void bl31_platform_setup(void)
199 {
200 prepare_dtb();
201
202 /* Initialize the gic cpu and distributor interfaces */
203 plat_versal_gic_driver_init();
204 plat_versal_gic_init();
205 }
206
207 void bl31_plat_runtime_setup(void)
208 {
209 uint64_t flags = 0;
210 int32_t rc;
211
212 set_interrupt_rm_flag(flags, NON_SECURE);
213 rc = register_interrupt_type_handler(INTR_TYPE_EL3,
214 rdo_el3_interrupt_handler, flags);
215 if (rc != 0) {
216 panic();
217 }
218 }
219
220 /*
221 * Perform the very early platform specific architectural setup here.
222 */
223 void bl31_plat_arch_setup(void)
224 {
225 plat_arm_interconnect_init();
226 plat_arm_interconnect_enter_coherency();
227
228 const mmap_region_t bl_regions[] = {
229 #if (defined(XILINX_OF_BOARD_DTB_ADDR) && !IS_TFA_IN_OCM(BL31_BASE) && \
230 (!defined(PLAT_XLAT_TABLES_DYNAMIC)))
231 MAP_REGION_FLAT(XILINX_OF_BOARD_DTB_ADDR, XILINX_OF_BOARD_DTB_MAX_SIZE,
232 MT_MEMORY | MT_RW | MT_NS),
233 #endif
234 MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
235 MT_MEMORY | MT_RW | MT_SECURE),
236 MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
237 MT_CODE | MT_SECURE),
238 MAP_REGION_FLAT(BL_RO_DATA_BASE, BL_RO_DATA_END - BL_RO_DATA_BASE,
239 MT_RO_DATA | MT_SECURE),
240 MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
241 BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
242 MT_DEVICE | MT_RW | MT_SECURE),
243 {0}
244 };
245
246 setup_page_tables(bl_regions, plat_get_mmap());
247 enable_mmu(0);
248 }