Debian Codegraph @

plat/rockchip/rk3568/include/platform_def.h

raw
1 /*
2 * Copyright (c) 2023, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #ifndef __PLATFORM_DEF_H__
8 #define __PLATFORM_DEF_H__
9
10 #include <arch.h>
11 #include <common_def.h>
12 #include <rk3568_def.h>
13
14 #define DEBUG_XLAT_TABLE 0
15
16 /*******************************************************************************
17 * Platform binary types for linking
18 ******************************************************************************/
19 #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
20 #define PLATFORM_LINKER_ARCH aarch64
21
22 /*******************************************************************************
23 * Generic platform constants
24 ******************************************************************************/
25
26 /* Size of cacheable stacks */
27 #if DEBUG_XLAT_TABLE
28 #define PLATFORM_STACK_SIZE 0x800
29 #elif IMAGE_BL1
30 #define PLATFORM_STACK_SIZE 0x440
31 #elif IMAGE_BL2
32 #define PLATFORM_STACK_SIZE 0x400
33 #elif IMAGE_BL31
34 #define PLATFORM_STACK_SIZE 0x800
35 #elif IMAGE_BL32
36 #define PLATFORM_STACK_SIZE 0x440
37 #endif
38
39 #define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
40
41 #define PLATFORM_SYSTEM_COUNT 1
42 #define PLATFORM_CLUSTER_COUNT 1
43 #define PLATFORM_CLUSTER0_CORE_COUNT 4
44
45 #define PLATFORM_CLUSTER1_CORE_COUNT 0
46 #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \
47 PLATFORM_CLUSTER0_CORE_COUNT)
48
49 #define PLATFORM_NUM_AFFS (PLATFORM_SYSTEM_COUNT + \
50 PLATFORM_CLUSTER_COUNT + \
51 PLATFORM_CORE_COUNT)
52
53 #define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
54
55 #define PLAT_RK_CLST_TO_CPUID_SHIFT 8
56
57 /*
58 * This macro defines the deepest retention state possible. A higher state
59 * id will represent an invalid or a power down state.
60 */
61 #define PLAT_MAX_RET_STATE 1
62
63 /*
64 * This macro defines the deepest power down states possible. Any state ID
65 * higher than this is invalid.
66 */
67 #define PLAT_MAX_OFF_STATE 2
68 /*******************************************************************************
69 * Platform memory map related constants
70 ******************************************************************************/
71 /* TF txet, ro, rw, Size: 512KB */
72 #define TZRAM_BASE (0x0)
73 #define TZRAM_SIZE (0x100000)
74
75 /*******************************************************************************
76 * BL31 specific defines.
77 ******************************************************************************/
78 /*
79 * Put BL3-1 at the top of the Trusted RAM
80 */
81 #define BL31_BASE (TZRAM_BASE + 0x40000)
82 #define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE)
83
84 /*******************************************************************************
85 * Platform specific page table and MMU setup constants
86 ******************************************************************************/
87 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
88 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
89
90 #define ADDR_SPACE_SIZE (1ull << 32)
91 #define MAX_XLAT_TABLES 18
92 #define MAX_MMAP_REGIONS 27
93
94 /*******************************************************************************
95 * Declarations and constants to access the mailboxes safely. Each mailbox is
96 * aligned on the biggest cache line size in the platform. This is known only
97 * to the platform as it might have a combination of integrated and external
98 * caches. Such alignment ensures that two maiboxes do not sit on the same cache
99 * line at any cache level. They could belong to different cpus/clusters &
100 * get written while being protected by different locks causing corruption of
101 * a valid mailbox address.
102 ******************************************************************************/
103 #define CACHE_WRITEBACK_SHIFT 6
104 #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
105
106 /*
107 * Define GICD and GICC and GICR base
108 */
109 #define PLAT_RK_GICD_BASE PLAT_GICD_BASE
110 #define PLAT_RK_GICC_BASE PLAT_GICC_BASE
111 #define PLAT_RK_GICR_BASE PLAT_GICR_BASE
112
113 /*
114 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
115 * terminology. On a GICv2 system or mode, the lists will be merged and treated
116 * as Group 0 interrupts.
117 */
118
119 #define PLAT_RK_GICV3_G1S_IRQS \
120 INTR_PROP_DESC(RK_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \
121 INTR_GROUP1S, GIC_INTR_CFG_LEVEL)
122
123 #define PLAT_RK_GICV3_G0_IRQS \
124 INTR_PROP_DESC(RK_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, \
125 INTR_GROUP0, GIC_INTR_CFG_LEVEL)
126
127 #define PLAT_RK_UART_BASE FPGA_UART_BASE
128 #define PLAT_RK_UART_CLOCK FPGA_UART_CLOCK
129 #define PLAT_RK_UART_BAUDRATE FPGA_BAUDRATE
130
131 #define PLAT_RK_PRIMARY_CPU 0x0
132
133 #define ATAGS_PHYS_SIZE 0x2000
134 #define ATAGS_PHYS_BASE (0x200000 - ATAGS_PHYS_SIZE)/* [2M-8K, 2M] */
135
136 #endif /* __PLATFORM_DEF_H__ */