| 1 |
/* |
| 2 |
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dram_regs.h> |
| 8 |
#include <m0_param.h> |
| 9 |
#include <pmu_bits.h> |
| 10 |
#include <pmu_regs.h> |
| 11 |
#include "misc_regs.h" |
| 12 |
#include "rk3399_mcu.h" |
| 13 |
|
| 14 |
static uint32_t gatedis_con0; |
| 15 |
|
| 16 |
static void idle_port(void) |
| 17 |
{ |
| 18 |
gatedis_con0 = mmio_read_32(PMUCRU_BASE + PMU_CRU_GATEDIS_CON0); |
| 19 |
mmio_write_32(PMUCRU_BASE + PMU_CRU_GATEDIS_CON0, 0x3fffffff); |
| 20 |
|
| 21 |
mmio_setbits_32(PMU_BASE + PMU_BUS_IDLE_REQ, |
| 22 |
(1 << PMU_IDLE_REQ_MSCH0) | (1 << PMU_IDLE_REQ_MSCH1)); |
| 23 |
while ((mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) & |
| 24 |
((1 << PMU_IDLE_ST_MSCH1) | (1 << PMU_IDLE_ST_MSCH0))) != |
| 25 |
((1 << PMU_IDLE_ST_MSCH1) | (1 << PMU_IDLE_ST_MSCH0))) |
| 26 |
continue; |
| 27 |
} |
| 28 |
|
| 29 |
static void deidle_port(void) |
| 30 |
{ |
| 31 |
mmio_clrbits_32(PMU_BASE + PMU_BUS_IDLE_REQ, |
| 32 |
(1 << PMU_IDLE_REQ_MSCH0) | (1 << PMU_IDLE_REQ_MSCH1)); |
| 33 |
while (mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) & |
| 34 |
((1 << PMU_IDLE_ST_MSCH1) | (1 << PMU_IDLE_ST_MSCH0))) |
| 35 |
continue; |
| 36 |
|
| 37 |
/* document is wrong, PMU_CRU_GATEDIS_CON0 do not need set MASK BIT */ |
| 38 |
mmio_write_32(PMUCRU_BASE + PMU_CRU_GATEDIS_CON0, gatedis_con0); |
| 39 |
} |
| 40 |
|
| 41 |
static void ddr_set_pll(void) |
| 42 |
{ |
| 43 |
mmio_write_32(CRU_BASE + CRU_DPLL_CON3, PLL_MODE(PLL_SLOW_MODE)); |
| 44 |
|
| 45 |
mmio_write_32(CRU_BASE + CRU_DPLL_CON3, PLL_POWER_DOWN(1)); |
| 46 |
mmio_write_32(CRU_BASE + CRU_DPLL_CON0, |
| 47 |
mmio_read_32(PARAM_ADDR + PARAM_DPLL_CON0)); |
| 48 |
mmio_write_32(CRU_BASE + CRU_DPLL_CON1, |
| 49 |
mmio_read_32(PARAM_ADDR + PARAM_DPLL_CON1)); |
| 50 |
mmio_write_32(CRU_BASE + CRU_DPLL_CON3, PLL_POWER_DOWN(0)); |
| 51 |
|
| 52 |
while ((mmio_read_32(CRU_BASE + CRU_DPLL_CON2) & (1u << 31)) == 0) |
| 53 |
continue; |
| 54 |
|
| 55 |
mmio_write_32(CRU_BASE + CRU_DPLL_CON3, PLL_MODE(PLL_NORMAL_MODE)); |
| 56 |
} |
| 57 |
|
| 58 |
__attribute__((noreturn)) void m0_main(void) |
| 59 |
{ |
| 60 |
mmio_setbits_32(PHY_REG(0, 927), (1 << 22)); |
| 61 |
mmio_setbits_32(PHY_REG(1, 927), (1 << 22)); |
| 62 |
idle_port(); |
| 63 |
|
| 64 |
mmio_write_32(CIC_BASE + CIC_CTRL0, |
| 65 |
(((0x3 << 4) | (1 << 2) | 1) << 16) | |
| 66 |
(1 << 2) | 1 | |
| 67 |
mmio_read_32(PARAM_ADDR + PARAM_FREQ_SELECT)); |
| 68 |
while ((mmio_read_32(CIC_BASE + CIC_STATUS0) & (1 << 2)) == 0) |
| 69 |
continue; |
| 70 |
|
| 71 |
ddr_set_pll(); |
| 72 |
mmio_write_32(CIC_BASE + CIC_CTRL0, 0x20002); |
| 73 |
while ((mmio_read_32(CIC_BASE + CIC_STATUS0) & (1 << 0)) == 0) |
| 74 |
continue; |
| 75 |
|
| 76 |
deidle_port(); |
| 77 |
mmio_clrbits_32(PHY_REG(0, 927), (1 << 22)); |
| 78 |
mmio_clrbits_32(PHY_REG(1, 927), (1 << 22)); |
| 79 |
|
| 80 |
mmio_write_32(PARAM_ADDR + PARAM_M0_DONE, M0_DONE_FLAG); |
| 81 |
|
| 82 |
for (;;) |
| 83 |
__asm__ volatile ("wfi"); |
| 84 |
} |