Debian Codegraph @

plat/rockchip/rk3328/include/platform_def.h

raw
1 /*
2 * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #ifndef PLATFORM_DEF_H
8 #define PLATFORM_DEF_H
9
10 #include <arch.h>
11 #include <plat/common/common_def.h>
12
13 #include <rk3328_def.h>
14
15 /*******************************************************************************
16 * Platform binary types for linking
17 ******************************************************************************/
18 #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
19 #define PLATFORM_LINKER_ARCH aarch64
20
21 /*******************************************************************************
22 * Generic platform constants
23 ******************************************************************************/
24
25 /* Size of cacheable stacks */
26 #if defined(IMAGE_BL1)
27 #define PLATFORM_STACK_SIZE 0x440
28 #elif defined(IMAGE_BL2)
29 #define PLATFORM_STACK_SIZE 0x400
30 #elif defined(IMAGE_BL31)
31 #define PLATFORM_STACK_SIZE 0x800
32 #elif defined(IMAGE_BL32)
33 #define PLATFORM_STACK_SIZE 0x440
34 #endif
35
36 #define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
37
38 #define PLATFORM_MAX_AFFLVL MPIDR_AFFLVL2
39 #define PLATFORM_SYSTEM_COUNT 1
40 #define PLATFORM_CLUSTER_COUNT U(1)
41 #define PLATFORM_CLUSTER0_CORE_COUNT U(4)
42 #define PLATFORM_CLUSTER1_CORE_COUNT U(0)
43 #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \
44 PLATFORM_CLUSTER0_CORE_COUNT)
45
46 #define PLATFORM_NUM_AFFS (PLATFORM_SYSTEM_COUNT + \
47 PLATFORM_CLUSTER_COUNT + \
48 PLATFORM_CORE_COUNT)
49
50 #define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
51
52 #define PLAT_RK_CLST_TO_CPUID_SHIFT 6
53
54 /*
55 * This macro defines the deepest retention state possible. A higher state
56 * id will represent an invalid or a power down state.
57 */
58 #define PLAT_MAX_RET_STATE U(1)
59
60 /*
61 * This macro defines the deepest power down states possible. Any state ID
62 * higher than this is invalid.
63 */
64 #define PLAT_MAX_OFF_STATE U(2)
65
66 /*******************************************************************************
67 * Platform memory map related constants
68 ******************************************************************************/
69 /* TF text, ro, rw, Size: 1MB */
70 #define TZRAM_BASE (0x0)
71 #define TZRAM_SIZE (0x100000)
72
73 /*******************************************************************************
74 * BL31 specific defines.
75 ******************************************************************************/
76 /*
77 * Put BL3-1 at the top of the Trusted RAM
78 */
79 #define BL31_BASE (TZRAM_BASE + 0x40000)
80 #define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE)
81
82 /*******************************************************************************
83 * Platform specific page table and MMU setup constants
84 ******************************************************************************/
85 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
86 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
87 #define MAX_XLAT_TABLES 9
88 #define MAX_MMAP_REGIONS 33
89
90 /*******************************************************************************
91 * Declarations and constants to access the mailboxes safely. Each mailbox is
92 * aligned on the biggest cache line size in the platform. This is known only
93 * to the platform as it might have a combination of integrated and external
94 * caches. Such alignment ensures that two maiboxes do not sit on the same cache
95 * line at any cache level. They could belong to different cpus/clusters &
96 * get written while being protected by different locks causing corruption of
97 * a valid mailbox address.
98 ******************************************************************************/
99 #define CACHE_WRITEBACK_SHIFT 6
100 #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
101
102 /*
103 * Define GICD and GICC and GICR base
104 */
105 #define PLAT_RK_GICD_BASE RK3328_GICD_BASE
106 #define PLAT_RK_GICC_BASE RK3328_GICC_BASE
107
108 #define PLAT_RK_UART_BASE UART2_BASE
109 #define PLAT_RK_UART_CLOCK RK3328_UART_CLOCK
110 #define PLAT_RK_UART_BAUDRATE RK3328_BAUDRATE
111
112 #define PLAT_RK_PRIMARY_CPU 0x0
113
114 #define PSRAM_DO_DDR_RESUME 0
115 #define PSRAM_CHECK_WAKEUP_CPU 0
116
117 #endif /* PLATFORM_DEF_H */