| 1 |
/* |
| 2 |
* Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <assert.h> |
| 8 |
|
| 9 |
#include <arch_helpers.h> |
| 10 |
#include <common/debug.h> |
| 11 |
#include <drivers/delay_timer.h> |
| 12 |
|
| 13 |
#include <plat_private.h> |
| 14 |
#include <secure.h> |
| 15 |
#include <soc.h> |
| 16 |
|
| 17 |
static void sgrf_ddr_rgn_global_bypass(uint32_t bypass) |
| 18 |
{ |
| 19 |
if (bypass) |
| 20 |
/* set bypass (non-secure regions) for whole ddr regions */ |
| 21 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(21), |
| 22 |
SGRF_DDR_RGN_BYPS); |
| 23 |
else |
| 24 |
/* cancel bypass for whole ddr regions */ |
| 25 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(21), |
| 26 |
SGRF_DDR_RGN_NO_BYPS); |
| 27 |
} |
| 28 |
|
| 29 |
/** |
| 30 |
* There are 8 + 1 regions for DDR secure control: |
| 31 |
* DDR_RGN_0 ~ DDR_RGN_7: Per DDR_RGNs grain size is 1MB |
| 32 |
* DDR_RGN_X - the memories of exclude DDR_RGN_0 ~ DDR_RGN_7 |
| 33 |
* |
| 34 |
* SGRF_SOC_CON6 - start address of RGN_0 + control |
| 35 |
* SGRF_SOC_CON7 - end address of RGN_0 |
| 36 |
* ... |
| 37 |
* SGRF_SOC_CON20 - start address of the RGN_7 + control |
| 38 |
* SGRF_SOC_CON21 - end address of the RGN_7 + RGN_X control |
| 39 |
* |
| 40 |
* @rgn - the DDR regions 0 ~ 7 which are can be configured. |
| 41 |
* @st - start address to set as secure |
| 42 |
* @sz - length of area to set as secure |
| 43 |
* The @st_mb and @ed_mb indicate the start and end addresses for which to set |
| 44 |
* the security, and the unit is megabyte. When the st_mb == 0, ed_mb == 0, the |
| 45 |
* address range 0x0 ~ 0xfffff is secure. |
| 46 |
* |
| 47 |
* For example, if we would like to set the range [0, 32MB) is security via |
| 48 |
* DDR_RGN0, then rgn == 0, st_mb == 0, ed_mb == 31. |
| 49 |
*/ |
| 50 |
static void sgrf_ddr_rgn_config(uint32_t rgn, uintptr_t st, size_t sz) |
| 51 |
{ |
| 52 |
uintptr_t ed = st + sz; |
| 53 |
uintptr_t st_mb, ed_mb; |
| 54 |
|
| 55 |
assert(rgn <= 7); |
| 56 |
assert(st < ed); |
| 57 |
|
| 58 |
/* check aligned 1MB */ |
| 59 |
assert(st % SIZE_M(1) == 0); |
| 60 |
assert(ed % SIZE_M(1) == 0); |
| 61 |
|
| 62 |
st_mb = st / SIZE_M(1); |
| 63 |
ed_mb = ed / SIZE_M(1); |
| 64 |
|
| 65 |
/* set ddr region addr start */ |
| 66 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(6 + (rgn * 2)), |
| 67 |
BITS_WITH_WMASK(st_mb, SGRF_DDR_RGN_ADDR_WMSK, 0)); |
| 68 |
|
| 69 |
/* set ddr region addr end */ |
| 70 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(6 + (rgn * 2) + 1), |
| 71 |
BITS_WITH_WMASK((ed_mb - 1), SGRF_DDR_RGN_ADDR_WMSK, 0)); |
| 72 |
|
| 73 |
/* select region security */ |
| 74 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(6 + (rgn * 2)), |
| 75 |
SGRF_DDR_RGN_SECURE_SEL); |
| 76 |
|
| 77 |
/* enable region security */ |
| 78 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(6 + (rgn * 2)), |
| 79 |
SGRF_DDR_RGN_SECURE_EN); |
| 80 |
} |
| 81 |
|
| 82 |
void secure_watchdog_gate(void) |
| 83 |
{ |
| 84 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(0), SGRF_PCLK_WDT_GATE); |
| 85 |
} |
| 86 |
|
| 87 |
void secure_watchdog_ungate(void) |
| 88 |
{ |
| 89 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(0), SGRF_PCLK_WDT_UNGATE); |
| 90 |
} |
| 91 |
|
| 92 |
__pmusramfunc void sram_secure_timer_init(void) |
| 93 |
{ |
| 94 |
mmio_write_32(STIMER1_BASE + TIMER_CONTROL_REG, 0); |
| 95 |
|
| 96 |
mmio_write_32(STIMER1_BASE + TIMER_LOAD_COUNT0, 0xffffffff); |
| 97 |
mmio_write_32(STIMER1_BASE + TIMER_LOAD_COUNT1, 0xffffffff); |
| 98 |
|
| 99 |
/* auto reload & enable the timer */ |
| 100 |
mmio_write_32(STIMER1_BASE + TIMER_CONTROL_REG, TIMER_EN); |
| 101 |
} |
| 102 |
|
| 103 |
void secure_gic_init(void) |
| 104 |
{ |
| 105 |
/* (re-)enable non-secure access to the gic*/ |
| 106 |
mmio_write_32(CORE_AXI_BUS_BASE + CORE_AXI_SECURITY0, |
| 107 |
AXI_SECURITY0_GIC); |
| 108 |
} |
| 109 |
|
| 110 |
void secure_timer_init(void) |
| 111 |
{ |
| 112 |
mmio_write_32(STIMER1_BASE + TIMER_CONTROL_REG, 0); |
| 113 |
|
| 114 |
mmio_write_32(STIMER1_BASE + TIMER_LOAD_COUNT0, 0xffffffff); |
| 115 |
mmio_write_32(STIMER1_BASE + TIMER_LOAD_COUNT1, 0xffffffff); |
| 116 |
|
| 117 |
/* auto reload & enable the timer */ |
| 118 |
mmio_write_32(STIMER1_BASE + TIMER_CONTROL_REG, TIMER_EN); |
| 119 |
} |
| 120 |
|
| 121 |
void secure_sgrf_init(void) |
| 122 |
{ |
| 123 |
/* |
| 124 |
* We use the first sram part to talk to the bootrom, |
| 125 |
* so make it secure. |
| 126 |
*/ |
| 127 |
mmio_write_32(TZPC_BASE + TZPC_R0SIZE, TZPC_SRAM_SECURE_4K(1)); |
| 128 |
|
| 129 |
secure_gic_init(); |
| 130 |
|
| 131 |
/* set all master ip to non-secure */ |
| 132 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(2), SGRF_SOC_CON2_MST_NS); |
| 133 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(3), SGRF_SOC_CON3_MST_NS); |
| 134 |
|
| 135 |
/* setting all configurable ip into non-secure */ |
| 136 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(4), |
| 137 |
SGRF_SOC_CON4_SECURE_WMSK /*TODO:|SGRF_STIMER_SECURE*/); |
| 138 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(5), SGRF_SOC_CON5_SECURE_WMSK); |
| 139 |
|
| 140 |
/* secure dma to non-secure */ |
| 141 |
mmio_write_32(TZPC_BASE + TZPC_DECPROT1SET, 0xff); |
| 142 |
mmio_write_32(TZPC_BASE + TZPC_DECPROT2SET, 0xff); |
| 143 |
mmio_write_32(SGRF_BASE + SGRF_BUSDMAC_CON(1), 0x3800); |
| 144 |
dsb(); |
| 145 |
|
| 146 |
/* rst dma1 */ |
| 147 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(1), |
| 148 |
RST_DMA1_MSK | (RST_DMA1_MSK << 16)); |
| 149 |
/* rst dma2 */ |
| 150 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(4), |
| 151 |
RST_DMA2_MSK | (RST_DMA2_MSK << 16)); |
| 152 |
|
| 153 |
dsb(); |
| 154 |
|
| 155 |
/* release dma1 rst*/ |
| 156 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(1), (RST_DMA1_MSK << 16)); |
| 157 |
/* release dma2 rst*/ |
| 158 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(4), (RST_DMA2_MSK << 16)); |
| 159 |
} |
| 160 |
|
| 161 |
void secure_sgrf_ddr_rgn_init(void) |
| 162 |
{ |
| 163 |
sgrf_ddr_rgn_config(0, TZRAM_BASE, TZRAM_SIZE); |
| 164 |
sgrf_ddr_rgn_global_bypass(0); |
| 165 |
} |