| 1 |
/* |
| 2 |
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <assert.h> |
| 8 |
#include <errno.h> |
| 9 |
|
| 10 |
#include <platform_def.h> |
| 11 |
|
| 12 |
#include <arch_helpers.h> |
| 13 |
#include <common/debug.h> |
| 14 |
#include <drivers/delay_timer.h> |
| 15 |
#include <lib/mmio.h> |
| 16 |
#include <plat/common/platform.h> |
| 17 |
|
| 18 |
#include <plat_private.h> |
| 19 |
#include <pmu.h> |
| 20 |
#include <pmu_com.h> |
| 21 |
#include <rk3288_def.h> |
| 22 |
#include <secure.h> |
| 23 |
#include <soc.h> |
| 24 |
|
| 25 |
DEFINE_BAKERY_LOCK(rockchip_pd_lock); |
| 26 |
|
| 27 |
static uint32_t cpu_warm_boot_addr; |
| 28 |
|
| 29 |
static uint32_t store_pmu_pwrmode_con; |
| 30 |
static uint32_t store_sgrf_soc_con0; |
| 31 |
static uint32_t store_sgrf_cpu_con0; |
| 32 |
|
| 33 |
/* These enum are variants of low power mode */ |
| 34 |
enum { |
| 35 |
ROCKCHIP_ARM_OFF_LOGIC_NORMAL = 0, |
| 36 |
ROCKCHIP_ARM_OFF_LOGIC_DEEP = 1, |
| 37 |
}; |
| 38 |
|
| 39 |
static inline int rk3288_pmu_bus_idle(uint32_t req, uint32_t idle) |
| 40 |
{ |
| 41 |
uint32_t mask = BIT(req); |
| 42 |
uint32_t idle_mask = 0; |
| 43 |
uint32_t idle_target = 0; |
| 44 |
uint32_t val; |
| 45 |
uint32_t wait_cnt = 0; |
| 46 |
|
| 47 |
switch (req) { |
| 48 |
case bus_ide_req_gpu: |
| 49 |
idle_mask = BIT(pmu_idle_ack_gpu) | BIT(pmu_idle_gpu); |
| 50 |
idle_target = (idle << pmu_idle_ack_gpu) | |
| 51 |
(idle << pmu_idle_gpu); |
| 52 |
break; |
| 53 |
case bus_ide_req_core: |
| 54 |
idle_mask = BIT(pmu_idle_ack_core) | BIT(pmu_idle_core); |
| 55 |
idle_target = (idle << pmu_idle_ack_core) | |
| 56 |
(idle << pmu_idle_core); |
| 57 |
break; |
| 58 |
case bus_ide_req_cpup: |
| 59 |
idle_mask = BIT(pmu_idle_ack_cpup) | BIT(pmu_idle_cpup); |
| 60 |
idle_target = (idle << pmu_idle_ack_cpup) | |
| 61 |
(idle << pmu_idle_cpup); |
| 62 |
break; |
| 63 |
case bus_ide_req_bus: |
| 64 |
idle_mask = BIT(pmu_idle_ack_bus) | BIT(pmu_idle_bus); |
| 65 |
idle_target = (idle << pmu_idle_ack_bus) | |
| 66 |
(idle << pmu_idle_bus); |
| 67 |
break; |
| 68 |
case bus_ide_req_dma: |
| 69 |
idle_mask = BIT(pmu_idle_ack_dma) | BIT(pmu_idle_dma); |
| 70 |
idle_target = (idle << pmu_idle_ack_dma) | |
| 71 |
(idle << pmu_idle_dma); |
| 72 |
break; |
| 73 |
case bus_ide_req_peri: |
| 74 |
idle_mask = BIT(pmu_idle_ack_peri) | BIT(pmu_idle_peri); |
| 75 |
idle_target = (idle << pmu_idle_ack_peri) | |
| 76 |
(idle << pmu_idle_peri); |
| 77 |
break; |
| 78 |
case bus_ide_req_video: |
| 79 |
idle_mask = BIT(pmu_idle_ack_video) | BIT(pmu_idle_video); |
| 80 |
idle_target = (idle << pmu_idle_ack_video) | |
| 81 |
(idle << pmu_idle_video); |
| 82 |
break; |
| 83 |
case bus_ide_req_hevc: |
| 84 |
idle_mask = BIT(pmu_idle_ack_hevc) | BIT(pmu_idle_hevc); |
| 85 |
idle_target = (idle << pmu_idle_ack_hevc) | |
| 86 |
(idle << pmu_idle_hevc); |
| 87 |
break; |
| 88 |
case bus_ide_req_vio: |
| 89 |
idle_mask = BIT(pmu_idle_ack_vio) | BIT(pmu_idle_vio); |
| 90 |
idle_target = (pmu_idle_ack_vio) | |
| 91 |
(idle << pmu_idle_vio); |
| 92 |
break; |
| 93 |
case bus_ide_req_alive: |
| 94 |
idle_mask = BIT(pmu_idle_ack_alive) | BIT(pmu_idle_alive); |
| 95 |
idle_target = (idle << pmu_idle_ack_alive) | |
| 96 |
(idle << pmu_idle_alive); |
| 97 |
break; |
| 98 |
default: |
| 99 |
ERROR("%s: Unsupported the idle request\n", __func__); |
| 100 |
break; |
| 101 |
} |
| 102 |
|
| 103 |
val = mmio_read_32(PMU_BASE + PMU_BUS_IDE_REQ); |
| 104 |
if (idle) |
| 105 |
val |= mask; |
| 106 |
else |
| 107 |
val &= ~mask; |
| 108 |
|
| 109 |
mmio_write_32(PMU_BASE + PMU_BUS_IDE_REQ, val); |
| 110 |
|
| 111 |
while ((mmio_read_32(PMU_BASE + |
| 112 |
PMU_BUS_IDE_ST) & idle_mask) != idle_target) { |
| 113 |
wait_cnt++; |
| 114 |
if (!(wait_cnt % MAX_WAIT_CONUT)) |
| 115 |
WARN("%s:st=%x(%x)\n", __func__, |
| 116 |
mmio_read_32(PMU_BASE + PMU_BUS_IDE_ST), |
| 117 |
idle_mask); |
| 118 |
} |
| 119 |
|
| 120 |
return 0; |
| 121 |
} |
| 122 |
|
| 123 |
static bool rk3288_sleep_disable_osc(void) |
| 124 |
{ |
| 125 |
static const uint32_t reg_offset[] = { GRF_UOC0_CON0, GRF_UOC1_CON0, |
| 126 |
GRF_UOC2_CON0 }; |
| 127 |
uint32_t reg, i; |
| 128 |
|
| 129 |
/* |
| 130 |
* if any usb phy is still on(GRF_SIDDQ==0), that means we need the |
| 131 |
* function of usb wakeup, so do not switch to 32khz, since the usb phy |
| 132 |
* clk does not connect to 32khz osc |
| 133 |
*/ |
| 134 |
for (i = 0; i < ARRAY_SIZE(reg_offset); i++) { |
| 135 |
reg = mmio_read_32(GRF_BASE + reg_offset[i]); |
| 136 |
if (!(reg & GRF_SIDDQ)) |
| 137 |
return false; |
| 138 |
} |
| 139 |
|
| 140 |
return true; |
| 141 |
} |
| 142 |
|
| 143 |
static void pmu_set_sleep_mode(int level) |
| 144 |
{ |
| 145 |
uint32_t mode_set, mode_set1; |
| 146 |
bool osc_disable = rk3288_sleep_disable_osc(); |
| 147 |
|
| 148 |
mode_set = BIT(pmu_mode_glb_int_dis) | BIT(pmu_mode_l2_flush_en) | |
| 149 |
BIT(pmu_mode_sref0_enter) | BIT(pmu_mode_sref1_enter) | |
| 150 |
BIT(pmu_mode_ddrc0_gt) | BIT(pmu_mode_ddrc1_gt) | |
| 151 |
BIT(pmu_mode_en) | BIT(pmu_mode_chip_pd) | |
| 152 |
BIT(pmu_mode_scu_pd); |
| 153 |
|
| 154 |
mode_set1 = BIT(pmu_mode_clr_core) | BIT(pmu_mode_clr_cpup); |
| 155 |
|
| 156 |
if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) { |
| 157 |
/* arm off, logic deep sleep */ |
| 158 |
mode_set |= BIT(pmu_mode_bus_pd) | BIT(pmu_mode_pmu_use_lf) | |
| 159 |
BIT(pmu_mode_ddrio1_ret) | |
| 160 |
BIT(pmu_mode_ddrio0_ret) | |
| 161 |
BIT(pmu_mode_pmu_alive_use_lf) | |
| 162 |
BIT(pmu_mode_pll_pd); |
| 163 |
|
| 164 |
if (osc_disable) |
| 165 |
mode_set |= BIT(pmu_mode_osc_dis); |
| 166 |
|
| 167 |
mode_set1 |= BIT(pmu_mode_clr_alive) | BIT(pmu_mode_clr_bus) | |
| 168 |
BIT(pmu_mode_clr_peri) | BIT(pmu_mode_clr_dma); |
| 169 |
|
| 170 |
mmio_write_32(PMU_BASE + PMU_WAKEUP_CFG1, |
| 171 |
pmu_armint_wakeup_en); |
| 172 |
|
| 173 |
/* |
| 174 |
* In deep suspend we use PMU_PMU_USE_LF to let the rk3288 |
| 175 |
* switch its main clock supply to the alternative 32kHz |
| 176 |
* source. Therefore set 30ms on a 32kHz clock for pmic |
| 177 |
* stabilization. Similar 30ms on 24MHz for the other |
| 178 |
* mode below. |
| 179 |
*/ |
| 180 |
mmio_write_32(PMU_BASE + PMU_STABL_CNT, 32 * 30); |
| 181 |
|
| 182 |
/* only wait for stabilization, if we turned the osc off */ |
| 183 |
mmio_write_32(PMU_BASE + PMU_OSC_CNT, |
| 184 |
osc_disable ? 32 * 30 : 0); |
| 185 |
} else { |
| 186 |
/* |
| 187 |
* arm off, logic normal |
| 188 |
* if pmu_clk_core_src_gate_en is not set, |
| 189 |
* wakeup will be error |
| 190 |
*/ |
| 191 |
mode_set |= BIT(pmu_mode_core_src_gt); |
| 192 |
|
| 193 |
mmio_write_32(PMU_BASE + PMU_WAKEUP_CFG1, |
| 194 |
BIT(pmu_armint_wakeup_en) | |
| 195 |
BIT(pmu_gpioint_wakeup_en)); |
| 196 |
|
| 197 |
/* 30ms on a 24MHz clock for pmic stabilization */ |
| 198 |
mmio_write_32(PMU_BASE + PMU_STABL_CNT, 24000 * 30); |
| 199 |
|
| 200 |
/* oscillator is still running, so no need to wait */ |
| 201 |
mmio_write_32(PMU_BASE + PMU_OSC_CNT, 0); |
| 202 |
} |
| 203 |
|
| 204 |
mmio_write_32(PMU_BASE + PMU_PWRMODE_CON, mode_set); |
| 205 |
mmio_write_32(PMU_BASE + PMU_PWRMODE_CON1, mode_set1); |
| 206 |
} |
| 207 |
|
| 208 |
static int cpus_power_domain_on(uint32_t cpu_id) |
| 209 |
{ |
| 210 |
uint32_t cpu_pd; |
| 211 |
|
| 212 |
cpu_pd = PD_CPU0 + cpu_id; |
| 213 |
|
| 214 |
/* if the core has been on, power it off first */ |
| 215 |
if (pmu_power_domain_st(cpu_pd) == pmu_pd_on) { |
| 216 |
/* put core in reset - some sort of A12/A17 bug */ |
| 217 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(0), |
| 218 |
BIT(cpu_id) | (BIT(cpu_id) << 16)); |
| 219 |
|
| 220 |
pmu_power_domain_ctr(cpu_pd, pmu_pd_off); |
| 221 |
} |
| 222 |
|
| 223 |
pmu_power_domain_ctr(cpu_pd, pmu_pd_on); |
| 224 |
|
| 225 |
/* pull core out of reset */ |
| 226 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(0), BIT(cpu_id) << 16); |
| 227 |
|
| 228 |
return 0; |
| 229 |
} |
| 230 |
|
| 231 |
static int cpus_power_domain_off(uint32_t cpu_id) |
| 232 |
{ |
| 233 |
uint32_t cpu_pd = PD_CPU0 + cpu_id; |
| 234 |
|
| 235 |
if (pmu_power_domain_st(cpu_pd) == pmu_pd_off) |
| 236 |
return 0; |
| 237 |
|
| 238 |
if (check_cpu_wfie(cpu_id, CKECK_WFEI_MSK)) |
| 239 |
return -EINVAL; |
| 240 |
|
| 241 |
/* put core in reset - some sort of A12/A17 bug */ |
| 242 |
mmio_write_32(CRU_BASE + CRU_SOFTRSTS_CON(0), |
| 243 |
BIT(cpu_id) | (BIT(cpu_id) << 16)); |
| 244 |
|
| 245 |
pmu_power_domain_ctr(cpu_pd, pmu_pd_off); |
| 246 |
|
| 247 |
return 0; |
| 248 |
} |
| 249 |
|
| 250 |
static void nonboot_cpus_off(void) |
| 251 |
{ |
| 252 |
uint32_t boot_cpu, cpu; |
| 253 |
|
| 254 |
boot_cpu = plat_my_core_pos(); |
| 255 |
boot_cpu = MPIDR_AFFLVL0_VAL(read_mpidr()); |
| 256 |
|
| 257 |
/* turn off noboot cpus */ |
| 258 |
for (cpu = 0; cpu < PLATFORM_CORE_COUNT; cpu++) { |
| 259 |
if (cpu == boot_cpu) |
| 260 |
continue; |
| 261 |
|
| 262 |
cpus_power_domain_off(cpu); |
| 263 |
} |
| 264 |
} |
| 265 |
|
| 266 |
void sram_save(void) |
| 267 |
{ |
| 268 |
/* TODO: support the sdram save for rk3288 SoCs*/ |
| 269 |
} |
| 270 |
|
| 271 |
void sram_restore(void) |
| 272 |
{ |
| 273 |
/* TODO: support the sdram restore for rk3288 SoCs */ |
| 274 |
} |
| 275 |
|
| 276 |
int rockchip_soc_cores_pwr_dm_on(unsigned long mpidr, uint64_t entrypoint) |
| 277 |
{ |
| 278 |
uint32_t cpu_id = plat_core_pos_by_mpidr(mpidr); |
| 279 |
|
| 280 |
assert(cpu_id < PLATFORM_CORE_COUNT); |
| 281 |
assert(cpuson_flags[cpu_id] == 0); |
| 282 |
cpuson_flags[cpu_id] = PMU_CPU_HOTPLUG; |
| 283 |
cpuson_entry_point[cpu_id] = entrypoint; |
| 284 |
dsb(); |
| 285 |
|
| 286 |
cpus_power_domain_on(cpu_id); |
| 287 |
|
| 288 |
/* |
| 289 |
* We communicate with the bootrom to active the cpus other |
| 290 |
* than cpu0, after a blob of initialize code, they will |
| 291 |
* stay at wfe state, once they are activated, they will check |
| 292 |
* the mailbox: |
| 293 |
* sram_base_addr + 4: 0xdeadbeaf |
| 294 |
* sram_base_addr + 8: start address for pc |
| 295 |
* The cpu0 need to wait the other cpus other than cpu0 entering |
| 296 |
* the wfe state.The wait time is affected by many aspects. |
| 297 |
* (e.g: cpu frequency, bootrom frequency, sram frequency, ...) |
| 298 |
*/ |
| 299 |
mdelay(1); /* ensure the cpus other than cpu0 to startup */ |
| 300 |
|
| 301 |
/* tell the bootrom mailbox where to start from */ |
| 302 |
mmio_write_32(SRAM_BASE + 8, cpu_warm_boot_addr); |
| 303 |
mmio_write_32(SRAM_BASE + 4, 0xDEADBEAF); |
| 304 |
dsb(); |
| 305 |
sev(); |
| 306 |
|
| 307 |
return 0; |
| 308 |
} |
| 309 |
|
| 310 |
int rockchip_soc_cores_pwr_dm_on_finish(void) |
| 311 |
{ |
| 312 |
return 0; |
| 313 |
} |
| 314 |
|
| 315 |
int rockchip_soc_sys_pwr_dm_resume(void) |
| 316 |
{ |
| 317 |
mmio_write_32(PMU_BASE + PMU_PWRMODE_CON, store_pmu_pwrmode_con); |
| 318 |
mmio_write_32(SGRF_BASE + SGRF_CPU_CON(0), |
| 319 |
store_sgrf_cpu_con0 | SGRF_DAPDEVICE_MSK); |
| 320 |
|
| 321 |
/* disable fastboot mode */ |
| 322 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(0), |
| 323 |
store_sgrf_soc_con0 | SGRF_FAST_BOOT_DIS); |
| 324 |
|
| 325 |
secure_watchdog_ungate(); |
| 326 |
clk_gate_con_restore(); |
| 327 |
clk_sel_con_restore(); |
| 328 |
clk_plls_resume(); |
| 329 |
|
| 330 |
secure_gic_init(); |
| 331 |
plat_rockchip_gic_init(); |
| 332 |
|
| 333 |
return 0; |
| 334 |
} |
| 335 |
|
| 336 |
int rockchip_soc_sys_pwr_dm_suspend(void) |
| 337 |
{ |
| 338 |
nonboot_cpus_off(); |
| 339 |
|
| 340 |
store_sgrf_cpu_con0 = mmio_read_32(SGRF_BASE + SGRF_CPU_CON(0)); |
| 341 |
store_sgrf_soc_con0 = mmio_read_32(SGRF_BASE + SGRF_SOC_CON(0)); |
| 342 |
store_pmu_pwrmode_con = mmio_read_32(PMU_BASE + PMU_PWRMODE_CON); |
| 343 |
|
| 344 |
/* save clk-gates and ungate all for suspend */ |
| 345 |
clk_gate_con_save(); |
| 346 |
clk_gate_con_disable(); |
| 347 |
clk_sel_con_save(); |
| 348 |
|
| 349 |
pmu_set_sleep_mode(ROCKCHIP_ARM_OFF_LOGIC_NORMAL); |
| 350 |
|
| 351 |
clk_plls_suspend(); |
| 352 |
secure_watchdog_gate(); |
| 353 |
|
| 354 |
/* |
| 355 |
* The dapswjdp can not auto reset before resume, that cause it may |
| 356 |
* access some illegal address during resume. Let's disable it before |
| 357 |
* suspend, and the MASKROM will enable it back. |
| 358 |
*/ |
| 359 |
mmio_write_32(SGRF_BASE + SGRF_CPU_CON(0), SGRF_DAPDEVICE_MSK); |
| 360 |
|
| 361 |
/* |
| 362 |
* SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR |
| 363 |
*/ |
| 364 |
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(0), SGRF_FAST_BOOT_ENA); |
| 365 |
|
| 366 |
/* boot-address of resuming system is from this register value */ |
| 367 |
mmio_write_32(SGRF_BASE + SGRF_FAST_BOOT_ADDR, |
| 368 |
(uint32_t)&pmu_cpuson_entrypoint); |
| 369 |
|
| 370 |
/* flush all caches - otherwise we might loose the resume address */ |
| 371 |
dcsw_op_all(DC_OP_CISW); |
| 372 |
|
| 373 |
return 0; |
| 374 |
} |
| 375 |
|
| 376 |
void rockchip_plat_mmu_svc_mon(void) |
| 377 |
{ |
| 378 |
} |
| 379 |
|
| 380 |
void plat_rockchip_pmu_init(void) |
| 381 |
{ |
| 382 |
uint32_t cpu; |
| 383 |
|
| 384 |
cpu_warm_boot_addr = (uint32_t)platform_cpu_warmboot; |
| 385 |
|
| 386 |
/* on boot all power-domains are on */ |
| 387 |
for (cpu = 0; cpu < PLATFORM_CORE_COUNT; cpu++) |
| 388 |
cpuson_flags[cpu] = pmu_pd_on; |
| 389 |
|
| 390 |
nonboot_cpus_off(); |
| 391 |
} |