Debian Codegraph @

plat/nxp/common/setup/common.mk

raw
1 #
2 # Copyright 2018-2021 NXP
3 #
4 # SPDX-License-Identifier: BSD-3-Clause
5 #
6 #
7
8 ###############################################################################
9 # Flow begins in BL2 at EL3 mode
10 RESET_TO_BL2 := 1
11
12 # Though one core is powered up by default, there are
13 # platform specific ways to release more than one core
14 COLD_BOOT_SINGLE_CPU := 0
15
16 PROGRAMMABLE_RESET_ADDRESS := 1
17
18 USE_COHERENT_MEM := 0
19
20 # Use generic OID definition (tbbr_oid.h)
21 USE_TBBR_DEFS := 1
22
23 PLAT_XLAT_TABLES_DYNAMIC := 0
24
25 ENABLE_SVE_FOR_NS := 0
26
27 ENABLE_STACK_PROTECTOR := 0
28
29 ERROR_DEPRECATED := 0
30
31 LS_DISABLE_TRUSTED_WDOG := 1
32
33 # On ARM platforms, separate the code and read-only data sections to allow
34 # mapping the former as executable and the latter as execute-never.
35 SEPARATE_CODE_AND_RODATA := 1
36
37 # Enable new version of image loading on ARM platforms
38 LOAD_IMAGE_V2 := 1
39
40 RCW := ""
41
42 ifneq (${SPD},none)
43 $(eval $(call add_define, NXP_LOAD_BL32))
44 endif
45
46 ###############################################################################
47
48 PLAT_TOOL_PATH := tools/nxp
49 CREATE_PBL_TOOL_PATH := ${PLAT_TOOL_PATH}/create_pbl
50 PLAT_SETUP_PATH := ${PLAT_PATH}/common/setup
51
52 PLAT_INCLUDES += -I${PLAT_SETUP_PATH}/include \
53 -Iinclude/plat/arm/common \
54 -Iinclude/drivers/arm \
55 -Iinclude/lib \
56 -Iinclude/drivers/io \
57 -Ilib/psci
58
59 # Required without TBBR.
60 # To include the defines for DDR PHY Images.
61 PLAT_INCLUDES += -Iinclude/common/tbbr
62
63 include ${PLAT_SETUP_PATH}/core.mk
64 PLAT_BL_COMMON_SOURCES += ${CPU_LIBS} \
65 plat/nxp/common/setup/ls_err.c \
66 plat/nxp/common/setup/ls_common.c
67
68 ifneq (${ENABLE_STACK_PROTECTOR},0)
69 PLAT_BL_COMMON_SOURCES += ${PLAT_SETUP_PATH}/ls_stack_protector.c
70 endif
71
72 include lib/xlat_tables_v2/xlat_tables.mk
73
74 PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
75
76 BL2_SOURCES += drivers/io/io_fip.c \
77 drivers/io/io_memmap.c \
78 drivers/io/io_storage.c \
79 common/desc_image_load.c \
80 plat/nxp/common/setup/ls_image_load.c \
81 plat/nxp/common/setup/ls_io_storage.c \
82 plat/nxp/common/setup/ls_bl2_el3_setup.c \
83 plat/nxp/common/setup/${ARCH}/ls_bl2_mem_params_desc.c
84
85 BL31_SOURCES += plat/nxp/common/setup/ls_bl31_setup.c \
86
87 ifeq (${LS_EL3_INTERRUPT_HANDLER}, yes)
88 $(eval $(call add_define, LS_EL3_INTERRUPT_HANDLER))
89 BL31_SOURCES += plat/nxp/common/setup/ls_interrupt_mgmt.c
90 endif
91
92 ifeq (${TEST_BL31}, 1)
93 BL31_SOURCES += ${TEST_SOURCES}
94 endif
95
96 # Verify build config
97 # -------------------
98
99 ifneq (${LOAD_IMAGE_V2}, 1)
100 $(error Error: Layerscape needs LOAD_IMAGE_V2=1)
101 else
102 $(eval $(call add_define,LOAD_IMAGE_V2))
103 endif
104
105 include $(CREATE_PBL_TOOL_PATH)/create_pbl.mk