Debian Codegraph @

plat/nxp/common/include/default/plat_default_def.h

raw
1 /*
2 * Copyright 2021 NXP
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 *
6 */
7
8 #ifndef PLAT_DEFAULT_DEF_H
9 #define PLAT_DEFAULT_DEF_H
10
11 /*
12 * Platform binary types for linking
13 */
14 #ifdef __aarch64__
15 #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
16 #define PLATFORM_LINKER_ARCH aarch64
17 #else
18 #define PLATFORM_LINKER_FORMAT "elf32-littlearm"
19 #define PLATFORM_LINKER_ARCH arm
20 #endif /* __aarch64__ */
21
22 #define LS_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
23
24 /* NXP Platforms have DRAM divided into banks.
25 * DRAM0 Bank: Maximum size of this bank is fixed to 2GB
26 * DRAM1 Bank: Greater than 2GB belongs to bank1 and size of bank1 varies from
27 * one platform to other platform.
28 * DRAMn Bank:
29 *
30 * Except a few, all the platforms have 2GB size as DRAM0 BANK.
31 * Hence common for all the platforms.
32 * For platforms where DRAM0 Size is < 2GB, it is defined in platform_def.h
33 */
34 #ifndef PLAT_DEF_DRAM0_SIZE
35 #define PLAT_DEF_DRAM0_SIZE 0x80000000 /* 2G */
36 #endif
37
38 /* This is common for all platforms where: */
39 #ifndef NXP_NS_DRAM_ADDR
40 #define NXP_NS_DRAM_ADDR NXP_DRAM0_ADDR
41 #endif
42
43 /* 1 MB is reserved for dma of sd */
44 #ifndef NXP_SD_BLOCK_BUF_SIZE
45 #define NXP_SD_BLOCK_BUF_SIZE (1 * 1024 * 1024)
46 #endif
47
48 /* 64MB is reserved for Secure memory */
49 #ifndef NXP_SECURE_DRAM_SIZE
50 #define NXP_SECURE_DRAM_SIZE (64 * 1024 * 1024)
51 #endif
52
53 /* 2M Secure EL1 Payload Shared Memory */
54 #ifndef NXP_SP_SHRD_DRAM_SIZE
55 #define NXP_SP_SHRD_DRAM_SIZE (2 * 1024 * 1024)
56 #endif
57
58 #ifndef NXP_NS_DRAM_SIZE
59 /* Non secure memory */
60 #define NXP_NS_DRAM_SIZE (PLAT_DEF_DRAM0_SIZE - \
61 (NXP_SECURE_DRAM_SIZE + NXP_SP_SHRD_DRAM_SIZE))
62 #endif
63
64 #ifndef NXP_SD_BLOCK_BUF_ADDR
65 #define NXP_SD_BLOCK_BUF_ADDR (NXP_NS_DRAM_ADDR)
66 #endif
67
68 #ifndef NXP_SECURE_DRAM_ADDR
69 #ifdef TEST_BL31
70 #define NXP_SECURE_DRAM_ADDR 0
71 #else
72 #define NXP_SECURE_DRAM_ADDR (NXP_NS_DRAM_ADDR + PLAT_DEF_DRAM0_SIZE - \
73 (NXP_SECURE_DRAM_SIZE + NXP_SP_SHRD_DRAM_SIZE))
74 #endif
75 #endif
76
77 #ifndef NXP_SP_SHRD_DRAM_ADDR
78 #define NXP_SP_SHRD_DRAM_ADDR (NXP_NS_DRAM_ADDR + PLAT_DEF_DRAM0_SIZE - \
79 NXP_SP_SHRD_DRAM_SIZE)
80 #endif
81
82 #ifndef BL31_BASE
83 /* 2 MB reserved in secure memory for DDR */
84 #define BL31_BASE NXP_SECURE_DRAM_ADDR
85 #endif
86
87 #ifndef BL31_SIZE
88 #define BL31_SIZE (0x200000)
89 #endif
90
91 #ifndef BL31_LIMIT
92 #define BL31_LIMIT (BL31_BASE + BL31_SIZE)
93 #endif
94
95 /* Put BL32 in secure memory */
96 #ifndef BL32_BASE
97 #define BL32_BASE (NXP_SECURE_DRAM_ADDR + BL31_SIZE)
98 #endif
99
100 #ifndef BL32_LIMIT
101 #define BL32_LIMIT (NXP_SECURE_DRAM_ADDR + \
102 NXP_SECURE_DRAM_SIZE + NXP_SP_SHRD_DRAM_SIZE)
103 #endif
104
105 /* BL33 memory region */
106 /* Hardcoded based on current address in u-boot */
107 #ifndef BL33_BASE
108 #define BL33_BASE 0x82000000
109 #endif
110
111 #ifndef BL33_LIMIT
112 #define BL33_LIMIT (NXP_NS_DRAM_ADDR + NXP_NS_DRAM_SIZE)
113 #endif
114
115 /*
116 * FIP image defines - Offset at which FIP Image would be present
117 * Image would include Bl31 , Bl33 and Bl32 (optional)
118 */
119 #ifdef POLICY_FUSE_PROVISION
120 #ifndef FUSE_BUF
121 #define FUSE_BUF ULL(0x81000000)
122 #endif
123
124 #ifndef FUSE_SZ
125 #define FUSE_SZ 0x80000
126 #endif
127 #endif
128
129 #ifndef MAX_FIP_DEVICES
130 #define MAX_FIP_DEVICES 2
131 #endif
132
133 #ifndef PLAT_FIP_OFFSET
134 #define PLAT_FIP_OFFSET 0x100000
135 #endif
136
137 #ifndef PLAT_FIP_MAX_SIZE
138 #define PLAT_FIP_MAX_SIZE 0x400000
139 #endif
140
141 /* Check if this size can be determined from array size */
142 #if defined(IMAGE_BL2)
143 #ifndef MAX_MMAP_REGIONS
144 #define MAX_MMAP_REGIONS 8
145 #endif
146 #ifndef MAX_XLAT_TABLES
147 #define MAX_XLAT_TABLES 6
148 #endif
149 #elif defined(IMAGE_BL31)
150 #ifndef MAX_MMAP_REGIONS
151 #define MAX_MMAP_REGIONS 9
152 #endif
153 #ifndef MAX_XLAT_TABLES
154 #define MAX_XLAT_TABLES 9
155 #endif
156 #elif defined(IMAGE_BL32)
157 #ifndef MAX_MMAP_REGIONS
158 #define MAX_MMAP_REGIONS 8
159 #endif
160 #ifndef MAX_XLAT_TABLES
161 #define MAX_XLAT_TABLES 9
162 #endif
163 #endif
164
165 /*
166 * ID of the secure physical generic timer interrupt used by the BL32.
167 */
168 #ifndef BL32_IRQ_SEC_PHY_TIMER
169 #define BL32_IRQ_SEC_PHY_TIMER 29
170 #endif
171
172 #endif /* PLAT_DEFAULT_DEF_H */