Debian Codegraph @

plat/intel/soc/common/include/platform_def.h

raw
1 /*
2 * Copyright (c) 2019-2022, ARM Limited and Contributors. All rights reserved.
3 * Copyright (c) 2019-2023, Intel Corporation. All rights reserved.
4 * Copyright (c) 2024, Altera Corporation. All rights reserved.
5 *
6 * SPDX-License-Identifier: BSD-3-Clause
7 */
8
9 #ifndef PLATFORM_DEF_H
10 #define PLATFORM_DEF_H
11
12 #include <arch.h>
13 #include <common/interrupt_props.h>
14 #include <common/tbbr/tbbr_img_def.h>
15 #include <plat/common/common_def.h>
16 #include "socfpga_plat_def.h"
17
18 /* Platform Type */
19 #define PLAT_SOCFPGA_STRATIX10 1
20 #define PLAT_SOCFPGA_AGILEX 2
21 #define PLAT_SOCFPGA_N5X 3
22 #define PLAT_SOCFPGA_AGILEX5 4
23 #define SIMICS_RUN 1
24 #define MAX_IO_MTD_DEVICES U(1)
25 /* Boot Source configuration
26 * TODO: Shall consider "assert_numeric" in the future
27 */
28 #if SOCFPGA_BOOT_SOURCE_NAND
29 #define BOOT_SOURCE BOOT_SOURCE_NAND
30 #elif SOCFPGA_BOOT_SOURCE_SDMMC
31 #define BOOT_SOURCE BOOT_SOURCE_SDMMC
32 #elif SOCFPGA_BOOT_SOURCE_QSPI
33 #define BOOT_SOURCE BOOT_SOURCE_QSPI
34 #else
35 #define BOOT_SOURCE BOOT_SOURCE_SDMMC
36 #endif
37
38 /* sysmgr.boot_scratch_cold4 & 5 used for CPU release address for SPL */
39 #define PLAT_CPU_RELEASE_ADDR 0xffd12210
40
41 /* Magic word to indicate L2 reset is completed */
42 #define L2_RESET_DONE_STATUS 0x1228E5E7
43
44 /* Magic word to differentiate for SMP secondary core boot request */
45 #define SMP_SEC_CORE_BOOT_REQ 0x1228E5E8
46
47 /* Define next boot image name and offset */
48 /* Get non-secure image entrypoint for BL33. Zephyr and Linux */
49 #ifdef PRELOADED_BL33_BASE
50 #define PLAT_NS_IMAGE_OFFSET PRELOADED_BL33_BASE
51 #else
52 #if PLATFORM_MODEL == PLAT_SOCFPGA_AGILEX5
53 #define PLAT_NS_IMAGE_OFFSET 0x80200000
54 #else
55 #define PLAT_NS_IMAGE_OFFSET 0x10000000
56 #endif
57 #endif /* #if PLATFORM_MODEL == PLAT_SOCFPGA_AGILEX5 */
58
59 #define PLAT_QSPI_DATA_BASE (0x3C00000)
60 #define PLAT_NAND_DATA_BASE (0x0200000)
61 #define PLAT_SDMMC_DATA_BASE (0x0)
62
63
64 /*******************************************************************************
65 * Platform binary types for linking
66 ******************************************************************************/
67 #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
68 #define PLATFORM_LINKER_ARCH aarch64
69
70 /* SoCFPGA supports up to 124GB RAM */
71 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 39)
72 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 39)
73
74
75 /*******************************************************************************
76 * Generic platform constants
77 ******************************************************************************/
78 #define PLAT_SECONDARY_ENTRY_BASE 0x01f78bf0
79
80 /* Size of cacheable stacks */
81 #define PLATFORM_STACK_SIZE 0x2000
82
83 /* PSCI related constant */
84 #define PLAT_NUM_POWER_DOMAINS 5
85 #define PLAT_MAX_PWR_LVL 1
86 #define PLAT_MAX_RET_STATE 1
87 #define PLAT_MAX_OFF_STATE 2
88 #define PLATFORM_SYSTEM_COUNT U(1)
89 #define PLATFORM_CLUSTER_COUNT U(1)
90 #define PLATFORM_CLUSTER0_CORE_COUNT U(4)
91 #define PLATFORM_CLUSTER1_CORE_COUNT U(0)
92 #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \
93 PLATFORM_CLUSTER0_CORE_COUNT)
94 #define PLATFORM_MAX_CPUS_PER_CLUSTER U(4)
95
96 /* Interrupt related constant */
97
98 #define INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER 29
99
100 #define INTEL_SOCFPGA_IRQ_SEC_SGI_0 8
101 #define INTEL_SOCFPGA_IRQ_SEC_SGI_1 9
102 #define INTEL_SOCFPGA_IRQ_SEC_SGI_2 10
103 #define INTEL_SOCFPGA_IRQ_SEC_SGI_3 11
104 #define INTEL_SOCFPGA_IRQ_SEC_SGI_4 12
105 #define INTEL_SOCFPGA_IRQ_SEC_SGI_5 13
106 #define INTEL_SOCFPGA_IRQ_SEC_SGI_6 14
107 #define INTEL_SOCFPGA_IRQ_SEC_SGI_7 15
108
109 #define TSP_IRQ_SEC_PHY_TIMER INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER
110 #define TSP_SEC_MEM_BASE BL32_BASE
111 #define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE + 1)
112
113
114 /*******************************************************************************
115 * BL31 specific defines.
116 ******************************************************************************/
117 /*
118 * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if
119 * present). BL31_BASE is calculated using the current BL3-1 debug size plus a
120 * little space for growth.
121 */
122
123 #define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
124
125 #define BL1_RO_BASE (0xffe00000)
126 #define BL1_RO_LIMIT (0xffe0f000)
127 #define BL1_RW_BASE (0xffe10000)
128 #define BL1_RW_LIMIT (0xffe1ffff)
129 #define BL1_RW_SIZE (0x14000)
130
131 #define BL_DATA_LIMIT PLAT_HANDOFF_OFFSET
132
133 #define PLAT_CPUID_RELEASE (BL_DATA_LIMIT - 16)
134 #define PLAT_SEC_ENTRY (BL_DATA_LIMIT - 8)
135
136 #define CMP_ENTRY 0xFFE3EFF8
137
138 #define PLAT_SEC_WARM_ENTRY 0
139
140 /*******************************************************************************
141 * Platform specific page table and MMU setup constants
142 ******************************************************************************/
143 #define MAX_XLAT_TABLES 8
144 #define MAX_MMAP_REGIONS 16
145
146 /*******************************************************************************
147 * Declarations and constants to access the mailboxes safely. Each mailbox is
148 * aligned on the biggest cache line size in the platform. This is known only
149 * to the platform as it might have a combination of integrated and external
150 * caches. Such alignment ensures that two maiboxes do not sit on the same cache
151 * line at any cache level. They could belong to different cpus/clusters &
152 * get written while being protected by different locks causing corruption of
153 * a valid mailbox address.
154 ******************************************************************************/
155 #define CACHE_WRITEBACK_SHIFT 6
156 #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
157
158 /*******************************************************************************
159 * UART related constants
160 ******************************************************************************/
161 #define CRASH_CONSOLE_BASE PLAT_UART0_BASE
162 #define PLAT_INTEL_UART_BASE PLAT_UART0_BASE
163
164 #define PLAT_BAUDRATE (115200)
165 #define PLAT_UART_CLOCK (100000000)
166
167 /*******************************************************************************
168 * PHY related constants
169 ******************************************************************************/
170
171 #define EMAC0_PHY_MODE PHY_INTERFACE_MODE_RGMII
172 #define EMAC1_PHY_MODE PHY_INTERFACE_MODE_RGMII
173 #define EMAC2_PHY_MODE PHY_INTERFACE_MODE_RGMII
174
175 /*******************************************************************************
176 * GIC related constants
177 ******************************************************************************/
178 #define PLAT_INTEL_SOCFPGA_GICD_BASE PLAT_GICD_BASE
179 #define PLAT_INTEL_SOCFPGA_GICC_BASE PLAT_GICC_BASE
180
181 /*******************************************************************************
182 * System counter frequency related constants
183 ******************************************************************************/
184
185 /*
186 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
187 * terminology. On a GICv2 system or mode, the lists will be merged and treated
188 * as Group 0 interrupts.
189 */
190 #define PLAT_INTEL_SOCFPGA_G1S_IRQ_PROPS(grp) \
191 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER, \
192 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_LEVEL), \
193 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_0, \
194 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
195 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_1, \
196 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
197 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_2, \
198 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
199 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_3, \
200 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
201 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_4, \
202 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
203 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_5, \
204 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
205 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_6, \
206 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
207 INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_7, \
208 GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE)
209
210 #define PLAT_INTEL_SOCFPGA_G0_IRQ_PROPS(grp)
211
212 #define MAX_IO_HANDLES 4
213 #define MAX_IO_DEVICES 4
214 #define MAX_IO_BLOCK_DEVICES 2
215
216 #ifndef __ASSEMBLER__
217 struct socfpga_bl31_params {
218 param_header_t h;
219 image_info_t *bl31_image_info;
220 entry_point_info_t *bl32_ep_info;
221 image_info_t *bl32_image_info;
222 entry_point_info_t *bl33_ep_info;
223 image_info_t *bl33_image_info;
224 };
225 #endif
226
227 #endif /* PLATFORM_DEF_H */